CAT 093 - ANM Alliance

advertisement
Amkette Analytics
Viscosity Cups
Positector 6000 Series - Coating Thickness Gauges
The process of flow through an orifice can often be used
as a relative measurement and classification of
viscosity. Viscosity Flow Cups are used for measuring
the consistency of paints, varnishes and other similar
products.
Each TQC viscosity cup is made under continuing quality
control procedures and provided with an engraved
unique serial number.
Orifice
ISO
DIN
ASTM
Zahn
2431
53211
D1200
1
—
—
VF2029 VF2226
2
—
VF2000
VF2030 VF2227
3
VF2048
VF2001
VF2031 VF2228
4
VF2049
VF1999
VF2032 VF2229
5
VF2183
VF2002
VF2033 VF2230
Anodize aluminum cup, fixed SS nozzle along with certificate
Viscosity Cup with Interchangeable Nozzles
Model
VF2020
1-8
Fineness of Grind Gauges / Grindometers / Hegman Gauge
Precision instrument to determine particle size and
fineness of many materials like paints, lacquers,
pigments, filler, chocolate etc.
Hegman
8 - 6.8NS
8 - 6NS
8 - 4NS
8 - 0NS
Graduation
1.5 µm
2.5 µm
5 µm
10 µm
Film Applicator
Cylindrical film applicator with 4 application sides to
apply paint-films of 4 different pre-defined thicknesses.
60
15
Model
VF1500
VF1501
VF1502
VF1515
Description
Width 3.15", 15/30/60/90µm
Width 3.15", 30/60/90/120µm
Width 3.15", 50/100/150/200µm
Width 3.15", 4 gaps as desired
90
Automatic Film Applicator
Motorised automatic film applicator with vacuum bed, built-in vacuum pump and
combined attachment assembly for standard block applicators and wire bar coaters.
Traverse speed
Speed accuracy
Stroke length
Length accuracy
Test chart size
Max. width AFA
Max height AFA
2 - 500 mm/s
± 1%
50 - 359 mm
± 2 mm
A3
300 mm
55 mm
Model
LD6057
LD6058
LD6025
LD6099
LD6104
LD6028
LD6109
Description
Positector 6000 (2) Standard
Positector 6000 (3) Advanced
F
FS
NS
FN
FNS
DewCheck 4 - The climate gauge for blasting and coating
Series
Description
Aluminum Viscosity Cup with
retainer for interchangeable nozzle
Interchangeable nozzle
Part No.
Microns
VF2110
0 - 15µm
VF2111
0 - 25µm
VF2112
0 - 50µm
VF2113
0 - 100µm
with certificate
The TQC Coating Thickness Gauge PosiTector 6000 is a
rugged, fully electronic coating thickness gauge that uses
magnetic and eddy current principles to measure,
accurately and quickly, coating thickness on both ferrous
and non-ferrous metals.
DewCheck 4
Special cups in either aluminum, or stainless steel fitted
with a stainless steel nozzle retainer. Stainless steel
nozzles, available from orifice 1mm to orifice 8mm, to
be ordered separately. Inner dimensions similar to DIN
53211.
30
Amkette Analytics
2
DewCheck 4 to Dewpoint Meter is an extremely
versatile, easy to use, measure and record all climate
parameters required to treat surfaces. Conforms to ISO
8502-4 & ASTM D3276-07.
Model
DC-7100
Description
DewCheck 4 Series 2
Wet Film Thickness Gauge
Hexagonal/Octagonal precision measuring comb made
of heavy stainless steel. The high-grade stainless steel
will not be affected by acid or base elements.
Part No.
SP4000
SP4010
SP4020
Range
20-370µm
25-2000µm
50-10000µm
Resolution
10 µm
30 µm
60 µm
Multi-Tester Master Paint Plate (Wet Film Thickness Gauge)
It is multi functional SS measuring tool for 1-(1.5)-2-3 mm
cross cut adhesion test and ASTM cross to measure wet
film thickness 50-160 µm. Rounding of edges, film
applicator 0 to 180 µm and viscosity of coating.
Model
SP3000
Description
Master Paint Plate
The TQC Cross Cut Adhesion Test is used to test the
adhesion of dry coats of paint on their substrate by
means of a series of cuts through the coating.
Description
ISO 1mm
ISO 2mm
ISO 3mm
ASTM 1mm
ASTM 1.5mm
Spare knife
SP1702
SP1703
SP1704
SP1705
SP1706
Description
ISO 1mm
ISO 2mm
ISO 3mm
ASTM 1mm
ASTM 1.5mm
Destructive Paint Inspection Gauge - SP 1100
(2 - 14.1")
(0.08")
SP 1100 SuperPIG is a destructive precision tool for
inspection and thickness measurement on single or
multiple coats on virtually all substrates, including wood,
plastics, metals etc. Also observes and measures
substrate and film defects.
(11.81")
(2.15")
Model
SP 1100
(0.008 - 19.7")
Pendulum Hardness Tester
TQC's Pendulum Hardness Tester has a lot of unique
features that eases defining hardness by the König and/or
Persoz method as described in ISO 1522. Both methods
work on the principle that the damping time of a
pendulum oscillating on a sample indicates the hardness.
Salt Spray Corrosion Test
Simple and reliable test chamber to perform accelerated
corrosion tests on a wide variety of materials such as
paints, metals, electronics etc. Simplicity of operation is
guaranteed by an easy to understand control panel, with
minimal operator intervention required. Good reliability
arises from the uncomplicated basic design, coupled with
the use of high quality component parts.
Acc. to ASTM B117, ISO 9227, DIN 50 021, JIS Z 2371
Washability, Wear and Abrasion Tester
Automatic Washability Test to perform a Abrasion and
washability scrub test on coated panels to define the
resistance of paint, varnish or related products to
scratching, wear and colour loss due to wet or dry scrub
abrasion. Simulating everyday wear from cleaning actions
or general use. Also suitable for testing plastics,
woodpanels, kitchentops, white goods, etc..
The test is either used as a "pass/fail" test by testing to a
specified number of strokes or defining the minimum
number of strokes at which a coating fails by checking at
regular intervals.
Impact Test (Indirect) - SP 1880
Test to determine the impact resistivity and flexibility of
coatings in accordance with DIN/ ISO 6272-2 and ASTM
D2794 (indirect impact).
The dual scale instrument is equipped with a special
guidance which assures that the distance between each
impact is always according to the standard. For correct
positioning a spirit-level is built-in.
Mandatory test in Qualicoat, QIB and GSB accredited
laboratories.
Bend Test Conical Mandrel - SP 1830
Cross Cut Adhesion Test Kit 2000 series
Model
SP1660
SP1661
SP1662
SP1663
SP1664
Amkette Analytics
Description
Super-PIG with cutter blades 1, 2 and 3
(ISO 2808, ISO/DN2409 & ASTM 3359)
Bend Test Conical Mandrel is to bend coated test panels
over a conical shaped mandrel in order to assess the
elasticity or resistance of a coating, paint or varnish to
cracking, elongation and/or detachment panel in
accordance with ISO 6860 and ASTM D522. It examines
the elasticity range of a coating over any diameter
between 3.1 and 38 mm in one single test.
Automatic Cupping Tester - SP 4300
Cupping tester is driven by a micro-step controlled electro
motor which allows precise and steady deformation with
0.01 mm steps.
An integrated LED powered sample illumination system
comforts examining the coating under test. To guarantee
maximum visibility of all possible types of surface
including high gloss, matte or colored samples the angle of
the LED light can be set. Choose light from just one or all
directions. The strength of the LED's is adjustable but also
the colors can be changed to achieve maximum contrast.
Amkette Analytics
Curve-X2 USB
Oven Profiler
The Curve-X2 USB offers easy-to-use,
high quality temperature data logging for
paint & powdercoat cure ovens.
Measurements, analysis levels and
report options are fully customizable to
provide you with tailor-made
information on the quality of your curing
processes.
TQC's Ideal Finish data analysis software
allows you to analyze the logged data
and create detailed reports.
All Curve-X2 USB probe have been
especially designed to guarantee
accurate readings.
Insulation Box
300°C or 500°C
Ideal Finish Analysis Software
Ideal Finish Analysis Software is the most advanced coating
cure, coating climate and coating thickness monitoring
software package available today. Detailed graphic
representations and customizable reports help you to make
the right decisions to optimise your production process
Optional add on
12 Channel System
1
2
3
Amkette Analytics
Gloss Meters
Vision on quality
A New Level of
Confidence
• SOLOGloss -60°
GL0010
• DUOGloss -20°/60°
GL0020
• POLYGloss -20°/60°/85° GL0030
The TQC Gloss meter allows the user to measure fast and simple accurate gloss levels on any
flat surface. Whether it be paper, paint, plastic, wood or any other material. No special
training or skills are required. Just place the gauge, press the scan button and read the values.
Template options can also provide the flexibility for use with curved surfaces or small test
areas.
In daily life different levels of gloss are recognized. Without knowing specific numerical values
we define surfaces as glossy or shiny, semi-glossy, satin or matt (flat, dull). By using a gloss
meter you are able to provide numerical data to back up visual perception.
Standards:
ISO 2813; ASTM D523; ASTM
D2457; ASTM C584
AS 1580 (602.2); BS 3900 D5; DIN
67530; JIS Z 8741;
ISO 7668; MFT 30064 (exception
45° angle)
20°
60°
Range
0-2000 GU 0-2000 GU
Repeatability r* 0.4 GU
0.2 GU
Reproducibility R* 1.7 GU
1.6 GU
Bias*
1.2 GU
0.6 GU
*Acc. ISO 2813 (range 0-100GU)
85°
0-2000 GU
0.2 GU
1.9 GU
1.6 GU
INSPECTION AND
MEASURING EQUIPMENT
Developers and manufacturers
of paint test equipment
4
5
6
Amkette Analytics
Limited
1)
2)
3)
4)
Wire-type Probe
5) Infrared Probe
Clamp Air Probe
6) Air Probe
Ball-type Sensor Probe
7) Magnetic Surface Probe
Clamp-type Surface Probe
7
ANM House,
Plot No. A-141, Road No. 23,
Wagle Industrial Area,
Thane (W) 400 604. INDIA
Tel.:
Fax:
Email:
URL:
91-22 - 6614 1500, 6668 1500
91-22 - 6668 1600
[email protected]
www.anmalliance.com
Download