CTS-DDN Data Sheet - Blue Ridge Technologies

BlueRidge
Technologies
Project
Capacitive Touch Station DDN
Part Number
Ref.
Data Sheet
Overview
Capacitive Touch Stations (CTS-DDN) provide local occupant overrides on
the DDN Network. CTS-DDN are available in Channel On/Off configuration
with one or two button layouts. The CTS-DDN interface features LED and
audible chirp indication as well as schedule transition warnings. CTS-DDN
fit decorator style wall plates, are gang-able with other devices, and are
available in four standard colors.
Features
Compatible with DDN Network
Available in Black, Gray, Light Almond, or White
Fits decorator style wall plates
Gang-able with other decorator style devices
Extended life cycle
•
No moving switch parts
•
LED indicator
General Specifications
Construction: Acrylic face, ABS/polycarbonate back box / mounting frame
Dimensions:
Station: 4.13”(105mm)H x 1.75”(44mm)W x 1.13”(29mm)D
Capacitive Touch Surface: 0.5”(13mm)H x 0.5”(13mm)W per button
Weight: 3oz (85g)
Mounting: Standard single gang or multi-gang switch box, (2) #6/32 screws
(included), and Decorator style wall plate (not included)
Operating Environment: 32-125°F (0-50°C), 20-95%RH, non-condensing
Warranty
Two (2) year limited manufacturer warranty from date of shipment
(extended warranty optional)
Low Voltage Specification
CTS-DDN Power / Draw: 24VDC / 15mA
Legacy Low Voltage Specifications
DDN Switch and Input Module Power / Draw: 24VDC / 20mA
DDN Network Specifications
Protocol: Digital Device Network (DDN)
Maximum Unique Button Addresses: 60
Address: DIP switch selectable
Topology: Daisy Chain Wiring (no stars or t-taps)
Wire Requirement: CL3P, 22AWG, 4 conductor, Unshielded
Maximum Length: 2,000’(610m)
Network Termination: DIP switch
Station Specifications
Button Layout Channel On/Off: 1, 2
Button Operation: Momentary On/Off
Indicator Operation
Audible Indication: Chirp when button is pressed
LED Status Indication: LED is on when associated lighting is on.
LED Schedule Transition Warning: Rapid blinking
Button Configuration
Each Unique Button Address is assigned to the lighting group of the
same number.
3-way / 4-way Operation: Requires CTS-DDN with same button layout.
Accomplished by using same button address (may require additional power).
Field Devices
Field Devices
Field Devices
DDN Network
DDN Network
DDN Network
Relay Panel (RP)
DDN Network
Retrofit Interior (RI)
Retrofit Kit (RK)
Field Devices
Capacitive Touch Station DDN
CTS-DDN
LVS
www.BRTint.com : 800-241-9173 Blue Ridge Technologies®
OCC
LS5
© 2014 Blue Ridge Technologies International, LLC All Rights Reserved. LC-CTSDDN-DS-V14.02
CTS-DDN (Capacitive Touch Station)
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS5 (Light Sensor)
Data Sheet
General Architecture
Internet
IP
BAS Protocol
BAS
BAS Router
Field Devices
Field Devices
Field Devices
DDN Network
DDN Network
DDN Network
Relay Panel (RP)
Retrofit Interior (RI)
DDN Network
Retrofit Kit (RK)
Field Devices
CTS-DDN
LVS
CTS-DDN (Capacitive Touch Station)
OCC
LS5
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS5 (Light Sensor)
General Architecture
Internet
IP
BAS Protocol
BAS
BAS Router
Controller Terminations
24
Field Devices
Field Devices
Field Devices
DDN Network
DDN Network
DDN Network
Relay Panel (RP)
DDN Network
H
L
G
CL3P / 22AWG / 4 Conductor
Unsheilded
CTS Lead
DDN Network Structure
Retrofit Kit (RK)
Retrofit Interior (RI)
24VDC (Red)
Signal (+) (Green)
Signal (-) (White)
Ground (Black)
CTS-DDN
Daisy Chain Only
Field Devices
From RI / RK / RP
LVS
OCC
LS5
CTS-DDN
CTS-DDN (Capacitive Touch Station)
LVS (Low Voltage Switch) / OCC (Occupancy Sensor) / LS5 (Light Sensor)
Button Layout Options
General Architecture
DDN Network Structure
Internet
Daisy Chain Only
From RI / RK / RP
BAS
BAS Router
Field Devices
DDN Network CTS-DDN
Field Devices
Field Devices
DDN Network
DDN Network
Relay Panel (RP)
1-Button Terminations
Button Layout Options
Interior (RI)
Retrofit Kitto(RK)
2-Button Retrofit
Terminations
1-Button
Controller
Ordering Information
LCCTS XXX - XX - DDN
Field Devices
DDN Network
CTS-DDN
Common
BAS
LVS (Low Voltage Switch)
/ OCC
Switch
1 (Occupancy Sensor) / LS5 (Light Sensor)
XXX = 1CH 1 Channel (On-Off)
BAS Router
T3
LCCTS2CH-XX-DDN
Light
Almond
1
G
T1
Switch
1
Controller
Terminations
2CH 2 Channels (On-Off)
Common
1-Button to Controller
T2
White
Grey
2-Button to Controller
Switch 2
Internet
Color
T2 Options
Field Devices
DDN Network
DDN Network
IP
XX = WH White 1
GR Grey 2
G
BL Black
Black
Switch 1
Common
Field Devices
Relay Panel (RP)
Switch 1
LS5
Common
Channel
Quantity
T1
T1
General Architecture
T3
LCCTS1CH-XX-DDN
1
OCC
G
LVS
CTS-DDN (Capacitive
Touch
Switch
1 Station)
n Terminations
IP
BAS Protocol
Switch 1
Switch 2
Common
LA Light Almond
Field Devices
DDN Network
Retrofit Interior (RI)
Retrofit Kit (RK)
BAS Protocol