Entry Line Industrial Fast Ethernet Switch with Power-over-Ethernet, 4x 10/100Base-TX + Uplink General The IP protocol has already left the in-house environment and is going to take all remaining communication areas. Industrial Ethernet already is an established idea, describing the reliable use of Ethernet components in harsh environments. Because of the large number of these applications the market requires simple and also reliable and cost effective products. With the new Industrial Ethernet Entry Line MICROSENS fulfils these requirements. The products are very compact and include: • 5 and 8 Port Fast Ethernet switches • 6, 6 and 8 Port Gigabit Ethernet switches • Switches with copper or fiber-uplink • Media Converters for Fast Ethernet and Gigabit Ethernet • Device Servers for the conversion of serial interfaces (RS-232/422/485) to IP. All new devices distinguish themselves with easy handling (Plug&Play) and do not need extensive configuration. New developments are focusing on increasing the port numbers and further implementation of Gigabit Ethernet. Benefits System Interface/Performance • • • • • • RJ-45 ports supports Auto MDI/MDI-X Function Embedded 4-port PoE Injector Function Store-and-Forward Switching Architecture Back-plane (Switching Fabric): 1Gbps 1Mbits Packet Buffer 1K MAC Address Table Power Supply • • 9..56 VDC Redundant Power Input 48..56 VDC @PoE Housing/Installation • • IP-30 Protection DIN Rail, Rack and Wall Mount Design • • • • Provides EFT protection 3000 VDC for power line Supports 6000 VDC Ethernet ESD protection Provides reverse polarity protection Provides overload current protection Safety MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com PoE/PoE+ Fast Ethernet Switch for Industrial Use Page 2/4 Standard Compliance IEEE Standards: • • • • • IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE802.3x Flow Control and Back Pressure IEEE802.3af Power-over-Ethernet (PoE) IEEE802.3at Power-over-Ethernet-Plus (PoE+) Switch Features The integrated switch has a store-and-forward architecture and can transmit all packets non-blocking between all ports at full wire speed. For data buffering the switch incorporates 1MBit of memory. Up to 1024 different MAC addresses can be stored simultaneously in the internal switch address tables. An automatic aging mechanism updates the tables max. 5 min. after the last reception of data. Dimensions MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 www.microsens.com PoE/PoE+ Fast Ethernet Switch for Industrial Use Page 3/4 Technical specifications Type 5 Port 10/100Base-TX Fast Ethernet Switch with 4x PoE/PoE+ Ports for industrial use Cable type Shielded Twisted Pair cable, 100 Ohm, > Cat. 5, Pinout RJ45-ports auto crossing Data rate 10 or 100 Mbps PoE / PoE+ on 4 copper ports, according to IEEE 802.3af/at End-point. PoE power per port 30 W. Maximum 36 W @ 56 VDC input. Maximum total power 126 W @ 56 VDC input LED displays Per port: Link/Activity (Green), PoE: Feeding Power (Amber) Per unit: Power1 (Green), Power2 (Green), Power3 (Green), Relay Contact (Amber) Mounting 35 mm hat rail, according DIN EN 50022 and wall mount Power supply 9..56 VDC Redundant Power Inputs 48..56 VDC for PoE/PoE+ operation connections with redundant screw terminals, third redundant power DIN port Power Consumption 3,76W @48 VDC (full load ohne PoE) Alarm Relay Contact Relay outputs with current carrying capacity of 1 A @24 VDC, Relay in open circuit mode when 2 powers are connected. In short circuit mode when only one power supply is connected Dimensions 36.2 x 105 x 142 mm (w x d x h) Operating temperature -40°C to 75°C Storage temperature -40°C to 85°C Rel. humidity 5% to 95% non condensing EMI FCC Class A, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN610004-8, CE EN61000-4-11, CE EN61000-6-2, CE EN61000-6-4 Safety CE / EN60950-1 Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 www.microsens.com PoE/PoE+ Fast Ethernet Switch for Industrial Use Page 4/4 Twisted Pair Connections The integrated auto-crossing function of all Twisted-Pair ports makes the use of crossed patch cables unnecessary. The switch automatically detects the pinout of the connected cable and adapts the port accordingly. For all connections standard 1:1 Twisted Pair cables can be used. The Autonegotiation mechanism detects automatically the speed and transmission mode (full or half duplex) between connected ports. A manual configuration is not required. Power supply The power supply is done by an external power supply with an output voltage of 48..56 VDC. The power supply unit is not included at delivery, but can be ordered separately (ex: MS700455). The connection is done by the pluggable screw terminals on the top of the device. The connection of a redundant power supply can be done by the second screw terminal. The third redundant power supply port is done by a pluggable power DIN connector. Power-over-Ethernet The converter supports the Power-over-Ethernet and Power-over-Ethernet-Plus function and supplies the 48..56 VDC to devices such as wireless access points, IP-cameras, access control systems via twisted-pair cables. The Power-over-Ethernet functionality according to the IEEE802.3af/at standard is integrated into the switch. The TP-port can supply the 48 VDC in addition to the data. The power is supplied according to the IEEE 802.3af/at standard. Order Information Art.-No. Description Connectors 5 Port Industrial Fast Ethernet Switch, 5x 10/100Base-TX, 4x PoE/PoE+ 4x RJ-45 PoE 1x RJ-45 2x Power Description Connectors MS700455 DIN Rail mounting power supply 50 W, 48 VDC/1.05 A, input voltage 85–264 VAC, screw terminals, temperature range -10°C..70°C In: 3-pin Out: 4-pin MS700456 DIN Rail mounting power supply 120 Watt 48 VDC/2.5 A, input voltage 93-132/180-264 VAC, screw terminals, temperature range -35°C..70°C In: 3-pin Out: 6-pin MS657100PX Accessories Art.-No. MICROSENS reserves the right to make any changes without further notice to any product to improve reliability, function or design. MICROSENS does not assume any liability arising out of the application or use of any product. 2216/tk MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 www.microsens.com