SPECIFICATIONS
HBEAM 2
HB2 | Suspended, Wall
Find additional images and information at
alwusa.com/hb2
HBEAM 2 – HB2
Suspended, Wall
SPECIFICATIONS
1. BASE MODEL
2. RUN LENGTH/
SIZE
HB2S
HB2W1
Page 2 of 8
2" suspended, direct/indirect
2" wall-mount, direct/indirect
Type:
1
Includes optional 1/4" stand-off bracket(s) for
alternative mounting option in the field
___
___
Individual (2’, 3’, 4’, 5', 6’, 7’ or 8’)
Continuous row or Configuration2(enter total linear length, ex: 20’)
2
3. LAMPING –
PRIMARY/
DIRECT
A configuration is a custom shape (rectangle square, L, etc.) with mitered corners.
Must choose quantity of mitered corners in Additional Options.
All lengths are nominal and may vary based on lamping and other
specfication selections. Consult factory when exact lengths are required.
NONENone. Select when specifying only Indirect Lamping or Accent Downlight
LED3
LOW4
MED
HI4
TUNE 5
DECOR4
RGB
Pair lamping with CCT (where applicable), ex: MED/2700K
Low-output, high-performance LED – 451 delivered lm/ft, 7.3 W/lf, 62 lm/W
2700K
3000K
3500K
4000K
Medium-output, high performance LED – 601 delivered lm/ft, 9.7 W/lf, 62 lm/W
2700K
3000K
3500K
4000K
High-output, high-performance LED – 751 delivered lm/ft, 12.1 W/lf, 62 lm/W
2700K
3000K
3500K
4000K
Tunable white LED, 2700K-5700K – 501 delivered lumens, 8.1 W/lf, 62 lm/W
(must select DMX driver below; controller not included)
Decorative constant voltage LED, 220 delivered lm/ft, 5.9 W/lf, 37 lm/W
3000K
3500K
4000K
Color-changing RGB LED, 5 W/lf
(must select DMX driver below; controller not included)
3
LED board options may be limited and/or subsituted to accomodate requests
for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory.
4
Performance calculations are extrapolated estimates based on the actual
IES test results of MED option at 3500K with an EXT/F lens
5
Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs
based on the actual IES test results of MED option at 3500K with an EXT/F lens.
Cooler and warmer CCT settings will provide lower delivered lumens, lower lm/W and higher W/lf.
FLUORESCENT
1T5
1T5HO
1T5S
1T5HOS
Lamps not provided
Standard output, 1-lamp profile T5
High output, 1-lamp profile T5
Standard output, 1-lamp profile T5, staggered
High output, 1-lamp profile T5, staggered
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
HBEAM 2 – HB2
Suspended, Wall
SPECIFICATIONS
4. DRIVER –
PRIMARY/
DIRECT
NONE
Page 3 of 8
None. Select when specifying only Indirect Lamping or Accent Downlight
LED
0/10V/
0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10%
DALI
DMX
HILUME/A3
DALI dimming to 0%
DMX dimming to 0%
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
1% Dimming to 1%
0% Premium dimming to 0%
FLUORESCENT
HILUME/A3
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
STD
Standard, non-dimming, <10% THD
FL/0/10V
Dimming, 0-10V
HILUME Lutron Hi-Lume® dimming
BALLASTARStep-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration
Consult ballast manufacturer for lamp compatibility
5. LENS–
PRIMARY/
DIRECT
NONE
EXT/F
None. Select when specifying only Indirect Lamping or Accent Downlight
Extra diffuse, flush
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
HBEAM 2 – HB2
Suspended, Wall
SPECIFICATIONS
6. LAMPING –
PRIMARY/
INDIRECT
NONE
LED6
Page 4 of 8
None. Select when specifying only Direct Lamping or Accent Downlight
Pair lamping with CCT (where applicable), ex: MED/2700K
LOW7
MED
HI7
TUNE 8
DECOR7
RGB
Low-output, high-performance LED – 557 delivered lm/ft, 7.3 W/lf, 76 lm/W
2700K
3000K
3500K
4000K
Medium-output, high performance LED – 743 delivered lm/ft, 9.7 W/lf, 76 lm/W
2700K
3000K
3500K
4000K
High-output, high-performance LED – 929 delivered lm/ft, 12.1 W/lf, 76 lm/W
2700K
3000K
3500K
4000K
Tunable white LED, 2700K-5700K – 619 delivered lumens, 8.1 W/lf, 76 lm/W
(must select DMX driver below; controller not included)
Decorative constant voltage LED, 272 delivered lm/ft, 5.9 W/lf, 46 lm/W
3000K
3500K
4000K
Color-changing RGB LED, 5 W/lf
(must select DMX driver below; controller not included)
6
LED board options may be limited and/or subsituted to accomodate requests
for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory.
7
Performance calculations are extrapolated estimates based on the actual
IES test results of MED option at 3500K with a WD lens
8
Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs
based on the actual IES test results of MED option at 3500K a WD lens. Cooler and
warmer CCT settings will provide lower delivered lumens, lower lm/W and higher W/lf.
FLUORESCENT
1T5
1T5HO
1T5S
1T5HOS
7. DRIVER –
INDIRECT
NONE
Lamps not provided
Standard output, 1-lamp profile T5
High output, 1-lamp profile T5
Standard output, 1-lamp profile T5, staggered
High output, 1-lamp profile T5, staggered
None. Select when specifying only Direct Lamping or Accent Downlight
LED
0/10V/
0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10%
DALI
DMX
HILUME/A3
DALI dimming to 0%
DMX dimming to 0%
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
1% Dimming to 1%
0% Premium dimming to 0%
FLUORESCENT
HILUME/A3
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
STD
Standard, non-dimming, <10% THD
FL/0/10V
Dimming, 0-10V
HILUME Lutron Hi-Lume® dimming
BALLASTARStep-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration
Consult ballast manufacturer for lamp compatibility
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
HBEAM 2 – HB2
Suspended, Wall
SPECIFICATIONS
8. LENS –
INDIRECT
NONE None. Select when specifying only Direct Lamping or Accent Downlight
WDFrosted (LEDs may be visible when dimmed)
EXT/F
Extra diffuse, flush
9. ACCENT
DOWNLIGHT
NONE
MR16/LED9
None. Select when specifying only Direct Lamping or Accent Downlight
GU5.3 base for retrofitting with MR16 LED (lamps not included)
10. QUANTITY –
ACCENT DOWNLIGHT
NONE
___
11. ACCESSORY –
ACCENT DOWNLIGHT
NONE
LSS
SOL HEX
SNT
Page 5 of 8
9
No aiming adjustment possible; straight down only
Lamp transformer and compatibility shall be checked by others.
ALW will provide transformer information on submittal drawings.
None. Select when specifying only Direct Lamping or Accent Downlight
Enter total quantity downlights per run length
For total quantity considerations, please note each
downlight requires 4” of linear length in the housing
None
Linear spread lens
Solite lens
Hexcell louver
Snoot
LINEAR
SPREAD LENS
SOLITE LENS
HEXCELL
LOUVER
SNOOT
Select one accessory type only.
For different accessories on different downlights, contact factory.
11. FINISH
AL
BK WH
RAL/ ___ Standard, natural “Ultimatte” aluminum
Black powdercoat
White powdercoat
Specify RAL powdercoat code (ex: #RAL/3003)
12. VOLTAGE
12010
27711
UNV
34712
120 volt
277 volt
Universal voltage
347 volt
10
For MR16/LED dimming, consult LED retrofit lamp manufacturer for voltage dimmer compatibility
Dimming with 277 volt not recommended for LED retrofit lamps.
12
Driver/ballast options may be limited with 347 voltage. Consult factory.
11
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
HBEAM 2 – HB2
Suspended, Wall
SPECIFICATIONS
13. ADDITIONAL
OPTIONS
NONE
COMBO
EMC/___13
EMB/___13
OS/___14
PH___14
MC/___
SB
Page 6 of 8
None
Combination 4.5" canopies at feed locations with both
power feed and suspension mounting hardware
Emergency circuit (indicate total quantity, ex: EMC/4)
Emergency battery pack (indicate total quantity, ex: EMB/4)
Occupancy sensor (indicate total quantity, ex: OS/4)
Photocell/daylight sensor (indicate total quantity, ex: PH/4)
Mitered corners (indicate total quantity, ex: MC/4 for a rectangle)
Seismic bracing
13
14
Consult factory for available options
Limitations exist depending on size and specification. Consult factory for options and details
LED LAMP PAIRING OPTIONS
Indirect
NONE
Direct
NONE
LOW
MED
LOW
û
ü
ü
ü
ü
ü
ü
ü
MED
HI
ü
ü
ü
ü
ü
ü
û
HI
ü
Limitations exist due to heat. Please follow above guidelines when specifying.
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
HBEAM 2 – HB2
Suspended, Wall
SPECIFICATIONS
DIMENSIONS
Page 7 of 8
5 7 ⁄8 "
2 7⁄16"
HB2S
EXT/F
5 7 ⁄8 "
5 7 ⁄8 "
2 7⁄16"
2 7⁄16"
2 3 ⁄4 "
HB2W
HB2W
Show with included,
optional 1/4" offset bracket
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
HBEAM 2 – HB2
Suspended, Wall
SPECIFICATIONS
HOUSING
Page 8 of 8
LINEAR LENS OPTIONS
100% recyclable, extruded architectural grade
T6061 aluminum with .08" minimum wall thickness.
Extruded, twin-layered, high-impact acrylic. EXT is
white and extra diffuse with minimal-to-no source
visibility. WD is lightly frosted with greater light output,
but possible source visibility.
ELECTRICAL
Fluorescent ballasts are <10% THD Class P.
Programmed-start standard. LED drivers
are Class 2. L80 >50,000 hours. 80+ CRI.
ETL listed for damp location with lens.
EMERGENCY
Luminaires can be wired for emergency circuit
and/or emergency battery backup. Consult factory
for details.
SUSPENSION HARDWARE
FLUSH LENS – EXT/F, WD
FINISH
Standard finish is "Ultimatte" aluminum — a smooth,
clean and durable finish achieved from a deep-etch
and two-step clear anodizing process. White, black
and color RAL powdercoat options also available.
CEILING HARDWARE
COMBO CANOPY
(1) 4.5" canopy per
power feed location,
(1) bullet mount, (1) 8'
aircraft cable and (1)
2" canopy (for use with
T-bar mounting) per
suspension point
Choose option
COMBO to specfiy
4.5" canopies at feed
locations with power
feed and aircraft cable
suspension mounting
ALUMINUM – AL
WHITE – WH
BLACK – BK
COLOR – RAL
Canopy finish
is always white.
Contact factory
for alternate color.
OPTIONS
Eye Bolt
(By Others)
Gripper
w/Hook
2-Cable
Clamp
Aircraft
Cable
SEISMIC BRACING
MITERED CORNERS
Add-on hardward
includes cable gripper
with hook, 2-cable
clamp and specified
length of aircraft cable
per suspension point
Consult factory
for mitered corner
angle options
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n