L O N IX A U T O M A T IO N

advertisement
Datasheet
Dimmer
LX-DIM-1-600i
The LX-DIM-1-600i is a microprocessor based 1-channel dimmer
capable of dimming loads up to 600W. It is perfect for controlling
various light sources with resistive, inductive or capacitive loads.
loads
Resistive, inductive and capacitive loads
Din-mounted
Compact size
Details
The product is controlled by 0-10V signal. The load is controlled by means
of Soft Start and Soft Off for pleasant use. Soft start also extends the lamp
life and protects the transformer. The load is switched off when control
signal is below 1V. The dimmer also has a dedicated function optimized for
LED modules. The Commissioning switch is used to test easily the
connections during commissioning. External potentiometer is an option
option.
The dimmer recognizes failure situations and switches off the load until the
fault is repaired. The blinking frequency of the red Error LED indicates the
type of fault: 2s frequency = overheating, 1s frequency = no voltage for
load, 0,3s = no control voltage (below 1V).
Fuse, 3,15 A, rapid, 5 x 20 mm
L: 230 VAC, 50 Hz
N: Neutral
PE: Protective earth
PE: Protective earth
N: Neutral
L': For load
Red LED (Error)
Green LED (OK)
Commissioning switch
DIP1: LED module control
DIP2: Commissioning switch
DIP3: Sliding control
DIP4: Selection of controlled load
DIP Functions
(Factory default: OFF)
OFF
ON
1
2
3
4
No
No
Yes
Inductive
Yes
Yes
No
Resistive, capacitive
LED module control
Commissioning switch
Sliding control
Controlled load selection
Err.: Error signals to logic
GND: Ground
PS: Potentiometer switch
GND: Ground
24 V: Operating voltage
GND-P: Ground (for potentiometer)
0–10V: Control signal
Pot.: External potentiometer
Order Code
LX-DIM-1-600i
Technical Data
Controlled Loads:
Mains Voltage:
Fuse:
Operating Voltage:
Control Voltage:
Potentiometer (option):
Operating Temperature:
Power Requirement:
Mounting:
Protection:
Dimensions:
LONIX LTD
Teollisuuskatu 33, FI-00510 Helsinki, Finland
Tel: +358 9 349 9853, Fax: +358 9 3499863
600 W (resistive, inductive or capacitive)
230VAC 50 Hz
3,15 A, rapid, 5 x 20 mm
15-24VDC or 12-24VAC
0-10V
4,7-10 kOhm
0 … +40 °C
~1W
DIN rail
IP20
90mm x 71mm x 53mm
www.lonix.com
Lonix Ltd. reserves the right to changes and updates of the information.
LONIX AUTOMATION
LX-DIM-1-600i
Download