HM-60116
APPENDIX
UL Standards for AR Series DC power input type
この付属書は、UL 規格の認証に必要な情報を記載しています。
This appendix describes the information required for UL's certification.
本附錄中記載著 UL 規格認證必需的資訊。
本附录中记载着 UL 规格认证必需的信息。
이 부속서에는 UL 규격 인증에 필요한 정보가 기재되어 있습니다.
This product is recognized by UL.
This information is important when you use this product as Recognized Component by UL.
Applicable Standards
Motor
Driver
Applicable Standards
UL 1004-1,-6
UL 508C
Certification Body
UL
UL
File No.
E336472
E171462
Compliance with UL Standards
Driver
Input/output power ratings
• †：Enter the motor type A (standard-single shaft-), B (standard-double shaft-), M (Electromagnetic Brake Type), in the box (†)
within the model name.
For geared type, † indicates A (single shaft) or M (with electromagnetic brake).
• For geared type, z represents the type of gear and number indicating the gear ratio.
• { indicates the cable length.
Pulse Input Type
Model
AR46S†Kz-{
AR66S†Kz-{
AR69S†K-{
AR98S†Kz-{
AR46†Kz-{
AR66†Kz-{
AR69†K-{
AR98†Kz-{
Motor model
ARM46S†Kz
ARM66S†Kz
ARM69S†K
ARM98S†Kz
ARM46†Kz
ARM66†Kz
ARM69†K
ARM98†Kz
Driver
model
ARD-K
Input
Voltage [V]
Current [A]
1.4
3.1
3.0
2.5
DC24/48 V
1.4
3.1
3.0
2.5
Output current [A]
1.48
2.55
1.48
2.55
Built-in Controller Type
Model
AR46S†KDz-{
AR66S†KDz-{
AR69S†KD-{
AR98S†KDz-{
AR46†KDz-{
AR66†KDz-{
AR69†KD-{
AR98†KDz-{
Motor model
ARM46S†Kz
ARM66S†Kz
ARM69S†K
ARM98S†Kz
ARM46†Kz
ARM66†Kz
ARM69†K
ARM98†Kz
Driver
model
ARD-KD
Input
Voltage [V]
Current [A]
1.8
3.8
3.7
3.1
DC24/48 V
1.8
3.8
3.7
3.1
Output current [A]
1.48
2.55
1.48
2.55
•
•
•
•
•
Drivers have no provision for solid state motor overload protection. Motor overload protection is required at end application.
Drivers have no provision for motor over temperature protection. Motor over temperature protection is required at end application.
For UL standard (UL 508C), the product is recognized for the condition of Maximum Surrounding Air Temperature 50 °C (122 °F).
For a circuit breaker or fuse that connects in the power line of the driver, use the UL listing product.
Drivers shall be used in Pollution degree 2 environment.
Motor
AR series motor (DC power input type) is recognized under UL 1004-1, -6 based on the condition shown herein.
The following shows the stepping motor specifications (Maximum Voltage, Maximum current, Holding torque and Maximum speed).
Characteristic
Motor model∗1
ARM46S†K
ARM46†K
ARM66S†K
ARM66†K
ARM69S†K
ARM69†K
ARM98S†K
ARM98†K
Maximum
Voltage [V]
Maximum
Current [A]
Heat sink size
[mm] ∗2
Holding Torque
[N·m]
Maximum
Speed [r/min]
1.48
115×115×5
0.3
4000
1
3000
2
2000
2
2000
50.4
2.55
250×250×6
†：Enter the motor type A (standard-single shaft-), B (standard-double shaft-), M (Electromagnetic Brake Type) in the box (†) within
the model name.
∗1 All models may or may not be followed by a hyphen and any letters and / or any numbers.
∗2 The material of the heat sink is aluminum.
オリエンタルモーター株式会社
ORIENTAL MOTOR CO., LTD.