Type
Job. Ref.
Catalog Number
r
PFSS-7126 r
PFSS-7226
r
PFSS-7118 r
PFSS-7218
r
PFSS-7113 r
PFSS-7213
7" APERTURE
3.5” DEEP SUPER SHALLOW
SINGLE/TWIN HORIZONTAL
COMPACT FLUORESCENT
13-18-26 DTT
with full size junction box
fully regressed (1.5”) lenses
The13-18-26 watt quad tube 4 pin lamp offers some of the most efficient lighting
for recessed downlighting. The specifically designed reflector ensures the proper
performance. By the design of the reflector we are also able to offer a smooth light
pattern, without the "usual hot spot", covering a large area.
APPLICATION
These fixtures have been ETL listed and tested to UL standards. The smooth light
pattern and low glare emissions make this fixture ideal for use in medium ceiling
height applications.
Trims
r
-C Clear
r
-W white
PRODUCT SPECIFICATION DATA:
•
•
•
•
•
•
•
•
•
•
r
-B Black Baffle
r
-WB White Baffle
Precision formed 20 Ga. Galvanized steel plaster pan
Designed for up to two (2) horizontally mounted 26W DTT lamps
14 Ga. Galvanized 28 Cu. In. J Box w/covers
Tested to UL Standard #1598/CSA C22.2 #250.0-00
Suitable for through wiring - 4 in/4 out #12 AWG
Trunion insures positive trim retention
120-277V Electronic ballast is standard
Suitable for use in wet locations "for covered installations only"
Bar hangers accommodate 27" span
Reflector ceiling trim flange is the same color as the reflector as
standard
r
-CCB Clear Alzak® Cross Blade
r
-WCB White Cross Blade
in white cone
r
-RD Regressed Drop Opal Lens
r
-RPD Regressed Polycarbonate Drop
r
-RPA Regressed Prismatic Acrylic
r
-RF Regressed Fresnel Lens
r
-RC Regressed Clear Lens
r
-RPG Regressed Prismatic Glass
r
-ICE Pendent Apertured Clear/
Frosted Glass
Alzak® is a registered trademark of Alcoa Aluminum
Options and Modifications
r
Cat. No. -F Fusing
r
Cat. No. -EM Emergency Battery Pack
Cat. No. -TR-W White Trim Ring
r
Cat. No. -DIM Dimming Ballast (N/A 13W) r
Cat. No. -CP Chicago Plenum
r
Cat. No. _____________________________ r
Cat. No. _______________________________
r
Cat. No. _____________________________ r
Cat. No. _______________________________
r
Cat. No. _____________________________ r
CONE OF LIGHT
PFSS-7226-CCB
Distance to
Illuminated
Plane
Initial Nadir
Footcandles
COEFFICIENT OF
UTILIZATION
Beam
Diameter
6'
25
6.0
8'
17
8.0
10'
9
12.0
12'
6
16.0
15'
3
20.0
CANDLEPOWER DISTRIBUTION CURVE
Test No:
Lamp:
Lumens:
LPW@ 120V:
S/MH:
Efficency:
P379621-2
(2) 26W-DTT
1,800
41 LPW
1.4
59%
75°
60°
45°
Energy Data
Ballast: Watts: Amps:
120 HPF
58
0.50
277 HPF
54
0.20
1020
0°
15°
30°
rc
rw
RCR 0
1
2
3
4
5
6
7
8
9
10
80%
50 30
75 75
68 67
63 61
59 55
55 49
49 45
45 41
40 35
37 32
33 29
30 26
50%
50 10
69 69
65 63
60 57
56 51
50 47
48 41
44 37
38 35
36 29
32 26
29 23
This fixture was designed, tested and photometrics generated using Phillips Lamps.
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements.
(Continued on Reverse Side) PAGE A 240
7230 Industrial Blvd. - Covington, GA 30014 • 770-787-8490 • FAX: 770-787-8521
© 2014
Catalog Number
7" APERTURE
3.5” DEEP SUPER SHALLOW
SINGLE/TWIN HORIZONTAL
COMPACT FLUORESCENT
13-18-26 DTT
with full size junction box
fully regressed (1.5”) lenses
PFSS-7226
r
PFSS-7126 r
PFSS-7218
r
PFSS-7118 r
PFSS-7213
r
PFSS-7113 r
REFLECTOR
1.This Alzak® treated low iridescence soft tone reflector is
available in clear as standard. Produced of .064 aluminum
eliminates reflector deflection. The trunion mount allows
the reflector to be secured snug to the ceiling without the
posibility of slipping.
JUNCTION BOX
6. Tested and listed for eight # 12 AWG (4 in & 4 out) 90°C
conductors, feed through branch wiring, 1/2" and 3/4" pry
outs and a galvanized finish. Positioned to allow straight
conduit runs. Access to the junction box in an inaccessible
ceiling is accomplished through the reflector opening.
TRIM RING
2. Trims are standard with trim ring matching the reflector
color. White is the option for ring finish. The trim ring has a
small return which makes the trim ring appear to flow into
the ceiling material.
BALLAST
7. Ballasts are electronic which allows flicker free starting
and noiseless operation at lower operating temperatures.
Ballast are thermally protected. Ballast turns itself off at end
of life. All ballasts are accessible from below through the
fixture aperture.
SOCKET HOUSING
3. The aluminum vented socket housing is designed to allow
maximum air circulation and cool operation.
HOUSING MOUNTING FRAME
4. A one piece 20 Ga. galvanized steel mounting frame
allows for rigid support of the complete fixture without
sagging. The frame is designed with a 1/2" collar which
extends from the bottom to accommodate ceiling materials
while finishing flush with the ceiling.
MOUNTING BRACKETS
5. The mounting bracket is engineered to be used in either
a T-bar, sheetrock, or plaster ceiling. The bar hangers are
secured to the plaster frame and may be extended to 27".
Bar hangers have provisions for mounting direct to
structural roof members (supplied by others).
SOCKET
8. A 4 pin base is used with the electronic and dimming
ballast fixtures as follows: 13W=G24Q-1, 18W=G24Q-2,
26W=G24Q-3. The sockets are all tested and listed
components.
LABELS
All fixtures are tested to the appropriate UL Standards by
Electrical Testing Laboratory and conform to CSA
C22.2#250.0-00. The labels are affixed to the fixture
indicating the test number and the standards used.
13.25
3.50
13.50
6.50
6.75
7.75
Dimensions and specifications in this catalog are based on the most current available data and are subject to change.
PAGE A 240 (Continued from Front Side)
7230 Industrial Blvd. - Covington, GA 30014 • 770-787-8490 • FAX: 770-787-8521
© 2014