Type
Job. Ref.
Catalog Number
CYLINDER - 5 CLUSTER GROUP
PENDANT VERTICAL FLUORESCENT
UNIVERSAL w/SOCKET & BALLAST
r P-G5-CTU-942
FOR 120/277v 26, 32, 42
PLT TRIPLE TUBE - LAMPS (5)
Cluster group consisting of 9" diameter, 16" high cylinder for use with universal
multi watt 26w, 32w and 42w ballast and socket and multi voltage 120/277v offer the
maximum in flexibility in future space allocation-more light or more energy
efficient. The specifically designed reflector ensures the proper cut-off, (greater
than 45 degrees) while at the same time producing optimum lumen output with low
glare and low iridescence. The one piece design reflector eliminates light leaks
around the cylinder edge. The Cylinder is engineered such that the components are
situated and mounted to facilitate maximum heat dissipation and maximum sound
attenuation.
APPLICATION
Pendant cylinders-cluster groups are typically used in large open atrium areas with
tall ceilings, when it is desirable to hang a visual element and use a lower wattage
lamp then what would ordinarily be required for the same level of illumination.
Trims
p -C Clear Alzak®
p -PTR Pewter Alzak®
p -BPC Blk. Pwdr. Coat
PRODUCT SPECIFICATION DATA:
• White powder coated extruded .063 aluminum.
• 26W, 32W or 42W PLT Lamps (1) mounted vertical in each of
5 units in the cluster.
• Tested to UL Standard #1598
• 120/277V Electronic ballast are standard
• Suitable for use in wet locations, "for covered installations only"
• Full wet location for outdoor use see options "-WL"
*Lens units only.
• Reflector trim flange is the same color as the reflector as
standard
• Swivel canopy for pendant mount (1/2" I.P.S.) with matte white
24" stem.
• Clean architectural brackets assures sturdy, rugged mounting.
• The paint finish exceeds 1000 hr astm 5% salt spray.
p -W White
p -WH Wheat
p -SH Soft Haze
p -B Black Baffle
p -WB White Baffle
p -CCB Clear Alzak® Cross Blade
p -WCB White Cross Blade
in white cone
p -RD* Regressed Drop Opal Lens
p -RPA* Regressed Prismatic Acrylic
p -RF* Regressed Fresnel Lens
p -RC* Regressed Clear Lens
p -RPG* Regressed Prismatic Glass
* Regressed splays are white as standard
Alzak® is a registered trademark of Alcoa Aluminum
Options and Modifications
r Cat. No. -DIM Dimming Ballast
r Cat. No. -F Fusing
r Cat. No. -AN Naturel Finish
r Cat. No. ___________________________
r Cat. No. ___________________________
r Cat. No. ___________________________
r Cat. No.
r Cat. No.
r
r Cat. No.
r Cat. No.
r
-CS Color Supreme-Non Iridescence
-EM Emergency Ballast
(remote mount by others)
-LT Lamp retianer
-WL* Wet location
*Available with lensed units only.
Mounting Options:
For Pendant Mount use:
- PND-24 includes white 24" stem and swivel canopy
CONE OF LIGHT FOR CLUSTERS OF 5
P-G5-CTU-942
Distance to
Illuminated
Plane
Initial Nadir
Footcandles
Beam
Diameter
12'
54
13.0
14'
48
15.0
16'
40
17.0
18'
34
19.0
20'
28
22.0
COEFFICIENT OF
UTILIZATION FOR EACH LAMP UNIT
CANDLEPOWER DISTRIBUTION CURVE
*Test No:
Lamp:
Lumens:
LPW@ 120V:
S/MH:
Efficency:
P9903210
(1) 42W .PLT
3,200
43 LPW
1.0
59%
75°
60°
45°
Energy Data
Ballast: Watts: Amps:
120 E
45
1.65
277 E
45
0.85
7875
0°
* Test and Lamp Data
for Each Lamp Unit
15°
30°
rc
rw
RCR 0
1
2
3
4
5
6
7
8
9
10
80%
50 30
68 68
63 62
58 56
54 51
50 47
47 43
43 41
41 37
38 34
36 32
33 30
50%
50 10
64 64
58 57
54 52
49 47
46 43
42 40
39 37
36 34
34 32
32 29
30 27
This fixture was designed, tested and photometrics generated using Phillips Lamps.
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements.
(Continued on Reverse Side) PAGE A 300
7230 Industrial Blvd. - Covington, GA 30014 • 770-787-8490 • FAX: 770-787-8521
© 2006
Catalog Number
CYLINDER - 5 CLUSTER GROUP
PENDANT VERTICAL FLUORESCENT
UNIVERSAL w/SOCKET & BALLAST
r P-G5-CTU-942
FOR 120/277v 26, 32, 42
PLT TRIPLE TUBE - LAMPS (5)
REFLECTOR
1.This Alzak® treated low iridescence soft tone reflector is
available in white, clear and pewter as standard. Produced
of .064 aluminum eliminates reflector deflection. The
precise spinning produces a one piece reflector and trim
ring. The parabolic design is polished to maximize the
reflectance. The mechanically fastened reflector assures
positive retention.
easily accessible from below.(45° swivel)
TRIM RING
2. Trims are standard with trim ring matching the reflector
color. White and black are options for ring finish. The trim
ring has a small return which makes the trim ring appear to
flow into the cylinder wall.
SOCKET
6. Socket is universal for 26w, 32w and 42w Triple Tube 4pin
base. 26W=G24Q-3, 32W=G24Q-3, 42W=GX24Q-4.
Socket includes positive lamp lock. The sockets are tested
and listed components.
HOUSING
3. Extruded from .063 aluminum. Outer housing is standard
white. Other colors may be available upon request. Pendant
mount is standard same color as outer housing.
LABELS
All fixtures are tested to the appropriate UL Standards by
Electrical Testing Laboratory. The labels are affixed to the
fixture indicating the test number and the standards used.
INSTALLING
4. —P Pendant mounting - swivel canopy for pendant
mount (1/2" I.P.S.) with matte white 24" stem. Ballast is
Cylinders are suitable for wet location "for covered
installations only" as standard. Outdoor use requires a lens
see -WL option.
BALLAST
5. Ballast are electronic which allows flicker free starting
and noiseless operation at lower operating temperatures.
Ballast are thermally protected. All standard electronic
ballast features end of life protection. All ballasts are
accessible from below through the fixture aperture.
9.00
4 PENDANT
5 BALLAST
16.00
6 SOCKET
3 HOUSING
1 REFLECTOR
2 TRIM RING
43.00
Dimensions and specifications in this catalog are based on the most current available data and are subject to change.
PAGE A 300 (Continued from Front Side)
7230 Industrial Blvd. - Covington, GA 30014 • 770-787-8490 • FAX: 770-787-8521
© 2006