CP-CL Compact I/O Modules
Compact I/O for Light Industrial Applications
The CP-CL Compact Line of
I/O Modules: Ideal for Light
Industrial Applications
For use in combination with the
SC valve terminal series, the
CL series of I/O modules is the
perfect complement for light
industrial applications such as
electronics assembly, handling,
and others.
CP-CL I/O modules are
compatible with:
• CP System (CP Fieldbus nodes,
CPV/CPA valve terminals)
• CP Direct Link valve terminals
(CPV, CDVI, CP-SC, etc.)
• CPX with CPI
Compact and Durable
The CP-CL series is size optimized
(approx. 150 x 30 x 23 mm) so
modules can get closer to
sensors and actuators. The
electronics are fully potted, and
encased in plastic, so weight is
minimized; and the IP class (up
to IP65/67) offers the highest
degree of protection. The 8
position input modules with M8
or M12 connectors are a
streamlined alternative to the 16
position CP aluminum modules.
A 16 position CL module is also
available for cabinet applications,
with cage clamp terminals.
For more information: www.festo.com/us/cpx
Applications
The modules are most suited for
the following industry segments,
but can be used in any
application requiring digital I/O :
• Packaging & Assembly
Machines
• Back End Semiconductor,
Electronics Assembly
• Light Assembly and Handling
CP-CL.PSI.US
Product Short Information
Compact CP-CL I/O Modules
Technical Data
Designation
Protection class
No. of channels
Sensor supply
Sensor connection
Display components
Interface
Designation
Protection class
No. of channels
Sensor/actuator supply
Sensor connection
Display components
Interface
CP-E08-M12-CL
CP-E08-M8-CL
IP65/IP67
8 digital inputs to IEC1131, type 2
24 V DC
Residual current per module: max. 0.8 A
Short circuit proof, overload proof (electronic fuse)
4 x M12 socket, 5-pin, double allocation
8 x M8 socket, 3 pin
8 x LEDs for sensor switching status display
1 x short-circuit/overload display
1 x status display
Incoming and ongoing CP interface
CP-E16-KL-CL
IP20
16 digital inputs to IEC1131, type 2
Sensor supply
24 V DC
Residual current per module: Max. 0.8 A
Short circuit proof, overload proof
(electronic fuse)
Via spring-tension terminal block, e.g.
via SAC 30
1 x short-circuit/overload display
1 x status display
Incoming and ongoing CP interface
CP-A04-M12-CL
IP65/67
4 digital outputs to IEC1131, type 2
Actuator supply
24 V DC
Max. 0.5 A per channel
Short circuit proof, overload proof
(electronic fuse)
4 x M12 socket, 5-pin, socket 1
and 3 double allocation
4 x LEDs for actuator
Switching status display
1 x short-circuit/overload display
1 x status display
CP-E08-M12-CL
CP-E08-M8-CL
CP-E16-KL-CL
Control Architecture
Festo Corporation
For ordering assistance, or to find
your nearest Festo Distributor,
Call: 1.800.99.FESTO
Fax:
1.800.96.FESTO
Email: customer.service@us.festo.com
Visit: www.festo.com/us
For technical support,
Call: 1.866.GO.FESTO
Fax:
1.800.96.FESTO
Email: product.support@us.festo.com
Subject to change
CP-CL.PSI.US
3.08