Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
SWIVEL TIMBER CARRIER
CAT. NO.
T-029-060-0423 - 5’ Complete Tool
W-029-060-0452 - 5’ Replacement Handle Only
High grade forged steel. Hardwood 2-1/2” diameter handle designed
for strength and a positive grip.
#1095-48
LEIDY UTILITY PROBE
Leidy Utility Probes are made of 1/2” diameter solid non-conductive
fiberglass with 3/4” diameter steel tips and are used to safely locate
underground utilities. Ends are forged of high carbon steel, welded to
a steel coupler and affixed to the handle with industrial strength epoxy.
PVC grip end. While these probes will direct electric current back into
the ground, insulated gloves and overshoes are recommended as a
secondary defense against injury.
CAT. NO.
DESCRIPTION
GRIP
WEIGHT
PVC Grip End
1 L b s.
1095-48
48" (2) Piece Utility Probe
1095-36
36" Utility Probe Extension
1 L b s.
Includes (1) #1095-48 & (1) #1095-36
2 L b s.
1095S E T
#1095-36
SEMI FLOAT BODY BELT
CATALOG NO. 1902
Dee Ring Sizes: 18-26, 28, 30
This is an economical model of the typical linemen’s belt using quality leathers
with a 6-ply neoprene impregnated nylon 1-3/4” waist strap. The rounded edge
and the 5” pad make this a favorite body belt among fixed dee ring, semi float body
belt users. Other standard features include: tool loops, knife snap, sleeve bag
ring, tape thong, pouch tabs, and gut strap rings. Belt is UL-Classified and meets
applicable OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard
plus all consensus and governing standards. Tested to 350 lbs. Weight: 5 lbs.
WORK
POSITIONING
FULL FLOAT BODY BELT
CATALOG NO. 1988M
Dee Ring Sizes: 18-26, 28, 30
This full float body belt has a 5-1/2" wide pad and utilizes a leather lined 6-ply
neoprene impregnated nylon waist strap. The pad has a soft cushion to provide
the user maximum comfort. The laced belt offers a quality look and added longevity
for the user. Other standard features include: tool loops, knife snap, sleeve bag
ring, tape thong, pouch tabs, and gut strap rings. Belt is UL-Classified and meets
applicable OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard
plus all consensus and governing standards. Tested to 350 lbs. Weight: 7 lbs.
147
WORK
POSITIONING
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
BODY BELT SIZING
The most critical measurement of a body belt, in terms of comfort, is the dee measurement. The proper dee size is normally
found by measuring from the prominent part of one hip bone around the back to the same point on the other hip bone. Add 2”
for padded belts and 4” for light weight Dri-lex® belts so that the dee ring heels are just forward of the hip bones and not on them.
All measuring should be done over clothing to be worn under the belt. Normal combinations of dee and belt measurements
are shown below. A body belt sized for the proper dee to dee size will fit correctly with the buckle tongue engaged in the
center hole. This allows additional holes on 1" centers on either side for adjusting to maximum or minimum length.
Belt Strap Maximum
Belt Strap Center Hole
Belt Strap Minimum
Dee to Dee size: Hip bone to Hip bone + 2” or 4”
X
APPROXIMATE WAIST TO
DEE RING SIZE
4” Approx.
Y
WAIST
APPROX.
SIZE
DEE RING SIZE
26..................................18
28..................................19
30..................................20
32..................................21
34..................................22
36..................................23
HOW TO SIZE A BODY BELT
38..................................24
X
Distance
from
waist
to
top of hip bone to where body belt is worn.
39..................................25
40..................................26
Y - Measurement is from front of hip bone around the back to the front of the other hip bone.
42..................................27
*Measure - (“Y” distance) is hip to hip then add 2” for padded belts and 4” for light weight
43..................................28
Dri-lex® belts. This measurement is the Dee size.
44..................................29
46..................................30
*Rule of Thumb - Measure from seam of pant, around buttocks to other seam and add 2”
47..................................31
for padded belts and 4” for light weight Dri-lex® belts.
48..................................32
Body Belt Information
Inspect your body belt prior to every use for:
• Cracks, nicks, distortion, or corrosion of hardware.
• Loose stitching, broken threads or burns.
• Loose or worn rivets.
• Loose grommets or elongated holes on waist strap.
• Worn Material.
• Broken accessory snap or ring.
• Tool loops worn to allow tools to fall free.
• Pocket tabs that won’t support pouches and tools.
Immediately remove the belt from service
if any of these conditions exist.
Never:
• Modify or punch a hole in a support component of the
body belt.
• Use a body belt made of all leather.
• Disconnect waist strap and rely on gut strap or suspenders
(suspenders & gut straps are rated to maximum of 25 lbs.).
• Use an accessory ring, snap or suspender rings for work
positioning.
Dee
Size
D18
D19
D20
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
D32
148
BODY BELT SIZING
Belt Strap
Belt Strap
Minimum
Center Hole
32"
36"
33"
37"
34"
38"
36"
40"
37"
41"
38"
42"
40"
44"
41"
45"
42"
46"
44"
48"
45"
49"
46"
50"
47"
51"
48"
52"
49"
53"
Belt Strap
Maximum
40"
41"
42"
44"
45"
46"
48"
49"
50"
52"
53"
54"
55"
56"
57"
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
JOURNEYMAN’S CHOICE
FULL FLOATING BODY BELT
CATALOG NO. 2000M
Dee Ring Sizes: 18-28, 30
Choose Color: Black* or Burgundy
*Black also available in Dee ring sizes: 31, 32 (Extra charge)
This is the finest belt available and is hand crafted of the highest quality leather. It
features a full float body belt with a 5-1/2" foam cushioned pad reinforced with
rawhide lace. The belt strap is leather with a nylon center to provide strength and
longer life. The full floating dees provide 4" lateral movement to reduce the wear
on the pole strap. Other standard features include: tool loops, knife snap, sleeve bag
ring, tape thong, pouch tabs, and gut strap rings. Belt is UL-Classified and meets
applicable OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard plus
all consensus and governing standards. Tested to 350 lbs. Weight: 7 lbs.
Burgundy
WORK
POSITIONING
FULL FLOAT BODY BELT
CATALOG NO. 1993F
Dee Ring Sizes: 18-28, 30
A lightweight full float body belt with an extra wide back support. The back pad is
8” of continuous firm cushion lined with durable brushed leather. The 1-3/4”
waist strap is 6-ply neoprene impregnated nylon with 9 adjustment holes. Other
standard features include: tool loops, knife snap, sleeve bag ring, tape thong,
pouch tabs, and gut strap rings. Belt is UL-Classified and meets applicable
OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard plus all
consensus and governing standards. Tested to 350 lbs. Weight: 6 lbs.
WORK
POSITIONING
DELUXE FULL FLOATING BODY BELT
CATALOG NO. 5278N
Dee Ring Sizes: 18-28, 30
Latigo leather belt pad is laced and stitched with two
pocket tabs. Rolled edge leather belt cushion for comfort
when leaning back. 5” overall width. Padded for maximum comfort
and body fit. 1-3/4” wide Klein-Kord® belt strap covered with top grain
harness leather for long lasting use. Full floating dee ring web strap with
straight double bar dee rings. Double riveted leather tool loops are 1-1/2”
wide. Other standard accessories include: Glove bag ring, two way knife
snap, four suspender rings, and tape thong. Belt is UL-Classified and
meets or exceeds applicable ASTM standards and OSHA requirements.
WORK
POSITIONING
STANDARD FULL FLOATING BODY BELT
CATALOG NO. 5282N
Dee Ring Sizes: 18-28, 30
Klein-Kord® belt pad with two pocket tabs. Rolled edge
leather belt cushion for comfort when leaning back. 5” overall
width. Padded for maximum comfort and body fit. 1-3/4” wide Klein-Kord®
belt strap covered with top grain harness leather for long lasting use. Full
floating dee ring web strap with straight double bar dee rings. Other standard
accessories include: Glove bag ring, two way knife snap, four suspender rings,
and tape thong. Belt is UL-Classified and meets or exceeds applicable ASTM
standards and OSHA requirements.
149
WORK
POSITIONING
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
LIGHTWEIGHT FULL FLOATING BODY BELT
Dri-lex® Liner Wicks Moisture Away
CATALOG NO. 2012KM - Quick Connect Buckle
Dee Ring Sizes: 18-28, 30, 31, 32
(Extra charge for Dee ring sizes 31, 32)
CATALOG NO. 2012M - Tongue Style Buckle
Dee Ring Sizes: 18-28, 30, 31, 32
(Extra charge for Dee ring sizes 31, 32)
A light weight full float body belt with a 5” Dri-lex® lined cushion pad designed
to wick moisture away from the user. Superior comfort is provided by extra
padding in the back support. Other standard features include: tool loops, knife
snap, sleeve bag ring, tape thong, pouch tabs, and gut strap rings. Available
with either a quick connect or tongue buckle. Belt is UL-Classified and meets
applicable OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard
plus all consensus and governing standards. Tested to 350 lbs. Weight: 6 lbs.
#2012M
WORK
POSITIONING
Quick Connect Buckle
on #2012KM and #2013KM
LIGHTWEIGHT FULL FLOATING BODY BELT
WITH BACKSAVER
Dri-lex® Liner Wicks Moisture Away
CATALOG NO. 2013KM - Quick Connect Buckle
Dee Ring Sizes: 18-28, 30, 31, 32
(Extra charge for Dee ring sizes 31, 32)
CATALOG NO. 2013M - Tongue Style Buckle
Dee Ring Sizes: 18-28, 30, 31, 32
(Extra charge for Dee ring sizes 31, 32)
This is a light weight full float body belt with a Dri-lex® lined cushion pad
designed to wick moisture away from the user. An 8” backsaver with extra
padding provides superior comfort and support which helps to relieve lower
back strain. Other standard features include: tool loops, knife snap, sleeve
bag ring, tape thong, pouch tabs, and gut strap rings. Available with either a
quick connect or tongue buckle. Belt is UL-Classified and meets applicable
OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard plus all
consensus and governing standards. Tested to 350 lbs. Weight: 6.2 lbs.
WORK
POSITIONING
LIGHTWEIGHT FULL FLOATING BODY BELT
WITH FOUR DEE RINGS AND BACKSAVER
Dri-lex® Liner Wicks Moisture Away
CATALOG NO. 2015M
Dee Ring Sizes: 18-28, 30, 31, 32
(Extra charge for Dee ring sizes 31, 32)
This belt has 4 in line Dee rings for attaching a second strap when crossing an
obstacle on the pole. It is a light weight full float body belt with a Dri-lex® lined
cushion pad designed to wick moisture away from the user. An 8” backsaver
with extra padding provides superior comfort and support which helps to relieve
lower back strain. Other standard features include: tool loops, knife snap, sleeve
bag ring, tape thong, pouch tabs, and gut strap rings. Tongue buckle strap. Belt
is UL-Classified and meets applicable OSHA standards, 1910.268 and 1926.959,
the ASTM F887 standard plus all consensus and governing standards. Tested
to 350 lbs. Weight: 6.5 lbs.
150
WORK
POSITIONING
#2013M
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
FULL FLOATING BACKSAVER BODY BELT
WITH FOUR STACKED DEE RINGS
CATALOG NO. 2100M
Dee Ring Sizes: 18-28, 30, 31, 32
(Extra charge for Dee ring sizes 31, 32)
This black belt is hand crafted of the highest quality leather. It has a 9”
back pad and waist strap only; no gut strap. There are four Dees; two
large full float double bar dees and two small upper dees. It features a
full float body belt with a 5-1/2" foam cushioned pad reinforced with
rawhide lace, bridge pieces and belt straps crafted of leather with a
nylon center to provide strength and longer life. The full floating dees
provide 4" lateral movement to reduce the wear on the pole strap. Other
standard features include: tool loops, knife snap, sleeve bag ring, tape
thong, and pouch tabs. Belt is UL-Classified and meets applicable OSHA
standards, 1910.268 and 1926.959, the ASTM F887 standard plus all
consensus and governing standards. Tested to 350 lbs. Weight: 7.8 lbs.
WORK
POSITIONING
FULL FLOAT BODY BELT WITH BACKSAVER
CATALOG NO. 20003M
Dee Ring Sizes: 18-28, 30
Choose Color: Black* or Burgundy
*Black also available in Dee ring sizes: 31, 32 (Extra charge)
The body belt section of #20003M is constructed using the padded #2000M
belt and has the added feature of a stitched on backsaver. The extra width
provides support to the back helping to relieve lower back strain. The
backsaver helps hold the belt and the dee rings in the perfect location. The
backsaver is tightened by the single strap with a tongue buckle. The
backsaver is not designed as a life support belt. Hand crafted of the
highest quality leather. It features a full float body belt with a 5-1/2" foam
cushioned pad reinforced with rawhide lace. The belt strap is leather with
a nylon center to provide strength and longer life. The full floating dees
provide 4" lateral movement to reduce the wear on the pole strap. Other
standard features include: tool loops, knife snap, sleeve bag ring, tape
thong, and pouch tabs. Belt is UL-Classified and meets applicable OSHA
standards, 1910.268 and 1926.959, the ASTM F887 standard plus all
consensus and governing standards. Tested to 350 lbs. Weight: 9 lbs.
Burgundy
WORK
POSITIONING
LINEMAN’S FULL FLOATING
BACKSAVER BODY BELT
CATALOG NO. 5299N
Dee Ring Sizes: 18, 20-28, 30
Leather construction is used throughout, including
tool loops, pocket tabs, and cushioning material.
Body belt strap, covered in leather, is made of
Klein-Kord®, an exceptionally strong nylon fabric
that is abrasion resistant, non-conductive, and
flexible. 4” lateral movement of Dee ring is independent of
belt and pad. Double riveted leather tool loops are 1-1/2” wide. Other
standard accessories include: Glove bag ring, two way knife snap,
four suspender rings, and tape thong. Belt is UL-Classified and meets
or exceeds applicable ASTM standards and OSHA requirements.
151
WORK
POSITIONING
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
MILLER® FULL FLOATING BACKSAVER
BODY BELT
CATALOG NO. 88N
Dee Ring Sizes: 18-28, 30, 32, 33
Full floating dee saddle construction with an unlined backsaver body pad.
The 2" special nylon dee saddle has a leather guide and wear pad. Backsaver
portion cut from top grade yellow latigo leather. Form fits to body and will not
discolor clothing. Waist strap is 1-3/4" wide. Nylon top strap is 2” wide. Total
height is 9”. Other features include: leather tool loops, support belt rings, two
tape thongs, accessory snaps, and accessory rings. Belt meets or exceeds
applicable ASTM standards and OSHA requirements.
WORK
POSITIONING
B O D Y B E L T S IZ IN G F O R # 8 8 N
D ee
S iz e
D 18
D 19
D 20
D 21
D 22
D 23
D 24
Top
B tm
Top
B tm
Top
B tm
Top
B tm
Top
B tm
Top
B tm
Top
B tm
B e lt S tr a p
M in im u m
B e lt S tr a p
C e n te r H o le
B e lt S tr a p
M a x im u m
32"
33"
34"
34"
35"
36"
36"
37"
37"
39"
38"
41"
39"
43"
37"
38"
39"
40"
40"
41"
41"
42"
42"
44"
43"
46"
44"
48"
43"
44"
44"
45"
45"
46"
46"
47"
47"
50"
48"
52"
49"
54"
D 25
D 26
D 27
D 28
D 30
D 32
D 33
Top
B tm
Top
B tm
Top
B tm
Top
B tm
Top
B tm
Top
B tm
Top
B tm
40"
44"
41"
45"
42"
46"
43"
47"
45"
48"
49"
50"
50"
51"
45"
49"
46"
50"
47"
51"
48"
52"
50"
53"
55"
56"
56"
57"
50"
55"
51"
56"
52"
57"
53"
58"
55"
59"
60"
61"
61"
62"
GUT STRAP WITH
BACK SUPPORT
Dee ring
Order
Size
Size
CATALOG NO. 6272
18..................34
For extra support and added comfort. Attaches to 19..................35
any body belt with four suspension dee rings. Dual 20..................36
take up straps in the back with the wide back saver, 21..................38
22..................39
and a front buckle assure a comfortable fit. Backsaver 23..................40
24..................42
height is 9”. This is not a safety belt.
25..................43
26..................44
27..................46
28..................47
29..................48
30..................49
WORK
POSITIONING
SAM BROWNE SHOULDER STRAPS
Nylon or Leather
Nylon Sam Browne
CATALOG NO. 6259
#6259
Woven nylon with leather shoulder pads designed to disburse the weight
of the belt and tools. Not intended to support belt by itself. Never
detach the waist belt tongue buckle. Straight keeper snap used to attach
suspender to the body belt (25 lbs. maximum support). One size fits all.
Leather Sam Browne with two straps in back
CATALOG NO. 259-4PT
You will like this belt supporter. Built for your comfort. Adjustable to fit
everyone and made of the very best grade soft saddle leather. Not
intended to support belt by itself. Never detach the waist belt tongue buckle.
152
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
BELT SUPPORTER
#6257
CATALOG NO. 6257
Sizes: S (fits 29” to 37”)
M (fits 33” to 41”)
L (fits 39” to 47”)
XL (fits 45” to 53”)
Favored by many since it allows greater freedom of movement than an
over-the-shoulder type supporter. It is a heavy 1-3/4” leather belt with 4
buckles and snaps on moveable leather loops designed to help support the
tool belt and tools. Not to be used solely to support belt without
assistance of body belt waist strap. Never detach the body belt waist
strap tongue from the billet end of the waist while working aloft.
Adjustable Leather Loop & Snap Assembly Only
(Color may vary)
CATALOG NO. 341 - Fits up to a 2” belt, Length: 5-1/2”, (sold each)
TAPE THONG
CATALOG NO. 6107
Thong with fiber bar. Fits all standard electrical tape rolls. Connects to
belt or holster by a rivet or barrel fastener. Length: 12".
HANDLINE CLIP
CATALOG NO. 5133
Handline clip with thong. Long lasting leather thong slotted at the top for
easy attachment to the belt. Tension of between 8 and 12 lbs. releases
the handline should it snag. Length: 10-1/2".
BREAK-AWAY BELT HOOK
CATALOG NO. H7
This non-conductive yellow nylon hand line belt hook is specially designed
to bend or break when approximately 14 to 18 lbs. pressure is applied.
The hook will straighten out and release the hand line should the line
snag on a tree limb or other pole line hardware. Washers and nuts are
frequently stored on the prong of the hook when installing or changing
pole top equipment. Overall size: 5” x 3-1/4”.
SIDEKICK
Tool Lanyard Bungy Cord
CATALOG NO. TL3
Used for tethering of small hand tools to workers to assist in preventing
tools from getting lost and aids in preventing injuries to workers below.
Carabiner on one end, loop on the other. Length: 28".
153
#341
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
MISC. BODY BELT ACCESSORIES
#5131
Two Way Knife Snap
CATALOG NO. 5131
Long lasting leather strap construction. Easily attaches to belts with screw
type rivets. Length: 5-1/4".
Wire D-Shaped Ring
CATALOG NO. 5132
#5132
D-shaped ring with leather strap and screw type rivets for attaching to
belt. Length: 2-1/2”.
#BP
Binding Screws and Posts
CATALOG NO. BP
Screw type rivet for attaching items to belt.
3/4” Clip and Dee
CATALOG NO. 1954
#1954
Steel wire dee. Sheet steel clip.
KLEIN-LOKTM SERIES POSITIONING STRAPS
CAT. NO. MAX. LENGTH
KL5295L
5' 8”
KL5295-6L
6'
KL5295-6-6L 6' 6”
KL5295-7L
7’
KL5295-8L
8'
MIN. LENGTH
4’ 1”
4’ 3”
4’ 6”
4’ 9”
5’ 9”
KL Series 5”
Snap Hook
Made of 6-ply Klein-Kord®, an exceptionally strong, flexible fabric. Internal
lock mechanism. Snap hook has a 5000 lb. proof loaded rating, and 11/16”
throat opening. Drop forged, single tongue adjustment buckle has a corrosion
resistant finish. Red wear indicator in center of strap alerts user when strap
needs to be replaced. Meets or exceeds applicable OSHA requirements and
ASTM and CSA standards. Width: 1-3/4”.
WORK
POSITIONING
KLEIN-GARDTM SERIES POSITIONING STRAPS
CAT. NO. MAX. LENGTH
KG5295L
5' 8”
KG5295-6L
6'
KG5295-6-6L 6' 6”
KG5295-7L
7’
KG5295-8L
8'
MIN. LENGTH
4’ 1”
4’ 3”
4’ 6”
4’ 9”
5’ 9”
KG Series 6-1/2”
Snap Hook
Made of 6-ply Klein-Kord®, an exceptionally strong, flexible fabric. Internal lock
mechanism. Elongated 6-1/2” snap hook is easy to use with even the thickest
gloves. Snap hook has a 5000 lb. proof loaded rating. Drop forged, single
tongue adjustment buckle has a corrosion resistant finish. Red wear indicator in
center of strap alerts user when strap needs to be replaced. Meets or exceeds
applicable OSHA requirements and ASTM and CSA standards. Width: 1-3/4”.
154
WORK
POSITIONING
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
"NF" SERIES POLE STRAP WITH
LOCKING SNAPS AND FRICTION BUCKLE
CAT. NO.
6NFLS - Max. Length: 6’
6 1/2NFLS - Max. Length: 6’ 6”
7NFLS - Max. Length: 7’
Made from urethane treated yellow latex nylon with a 2-ply red nylon center.
When the red nylon center strap is visible it alerts the user the strap needs to
be replaced. Hot wax treated nylon thread used throughout. Forged snaps.
Forged friction buckle eliminates tongue buckle holes and adds greatly to the
life and wear quality of the strap. Strength is equal to that of forged steel
snaps. No large lump at friction buckle and will not slip even at breaking point
of snaps. Meets or exceeds applicable OSHA requirements and ASTM and
CSA standards. Width: 1-3/4”.
WORK
POSITIONING
"N" SERIES POLE STRAP WITH
LOCKING SNAPS
CAT. NO.
6NLS - Max. Length: 6’
6 1/2NLS - Max. Length: 6’ 6”
7NLS - Max. Length: 7’
Made from urethane treated yellow latex nylon with a 2-ply red nylon center.
When the red nylon center strap is visible it alerts the user the strap needs to
be replaced. Hot wax treated nylon thread used throughout. Forged snaps.
Single forged tongue buckle adjustment. Buckle hole strength of 2100 lbs. on
straight snap-to-snap pull. All holes seared for long life. Meets or exceeds
applicable OSHA requirements and ASTM and CSA standards. Width: 1-3/4”.
WORK
POSITIONING
"NC" SERIES POLE STRAP
WITH LOCKING SNAPS
CAT. NO.
6NCLS - Max. Length: 6’
6 1/2NCLS - Max. Length: 6’ 6”
7NCLS - Max. Length: 7’
Made from urethane treated yellow latex nylon with dry tannage gray chrome
leather over the maximum wear area. There is a 2-ply red nylon center
strap that when visible alerts the user the strap needs to be replaced. Hot
wax treated nylon thread used throughout. Forged snaps. Single forged
tongue buckle adjustment. Buckle hole strength of 2100 lbs. on straight
snap-to-snap pull. All holes seared for long life. Meets or exceeds applicable
OSHA requirements and ASTM and CSA standards. Width: 1-3/4”.
WORK
POSITIONING
POSITIONING STRAP EXTENSION
CATALOG NO. 38189E
When the existing positioning strap is not long enough an extension strap
provides the extra length needed. Simply connect the snap to the dee ring and the
snap to the body belt. 6-ply neoprene impregnated nylon. 5000 lb. test dee ring
and regular 5000 lb. snap. Meets or exceeds applicable OSHA requirements and
ASTM and CSA standards. Overall size: 1-3/4” wide x 18” long.
155
WORK
POSITIONING
Grove City, PA 16127-0230
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
NYBUCK POSITIONING STRAPS
WITH SLIDE BUCKLE
EASY T
O ADJ
U
THE L
ENGTH ST
OF
THE ST
RAP!!
CAT. NO.
344299E - Max. Length: 5’ 8”
346099E - Max. Length: 6’
346699E - Max. Length: 6’ 6”
347099E - Max. Length: 7’
348099E - Max. Length: 8’
NYBUCK is a 6-ply filament nylon woven into cloth which is impregnated with
neoprene, then folded and subjected to tremendous pressure to assure permanent
bonding without raw edges which would allow moisture penetration. Its strength is
tremendous, yet very lightweight. Center layers are a contrasting color that when
visible alerts the user the strap needs to be replaced. Linemen who have used
leather pole straps will be pleasantly surprised by the ample flexibility of these nylon
units. Drop forged locking snap hooks on both ends. Slide buckle for quick length
adjustments. Meets or exceeds applicable OSHA requirements and ASTM and
CSA standards. Width: 1-3/4”.
Slide Buckle
WORK
POSITIONING
NYBUCK POSITIONING STRAPS
WITH TONGUE BUCKLE
CAT. NO.
384299E - Max. Length: 5’ 8”
386099E - Max. Length: 6’
386699E - Max. Length: 6’ 6”
387099E - Max. Length: 7’
388099E - Max. Length: 8’
NYBUCK is a 6-ply filament nylon woven into cloth which is impregnated with
neoprene, then folded and subjected to tremendous pressure to assure permanent
bonding without raw edges which would allow moisture penetration. Its strength is
tremendous, yet very lightweight. Center layers are a contrasting color that when
visible alerts the user the strap needs to be replaced. Linemen who have used
leather pole straps will be pleasantly surprised by the ample flexibility of these nylon
units. Drop forged locking snap hooks on both ends. Single forged tongue buckle
adjustment. Meets or exceeds applicable OSHA requirements and ASTM and CSA
standards. Width: 1-3/4”.
WORK
POSITIONING
HALL’S DOUBLE LATIGO POLE STRAP
Locking Snap Hooks, Nylon Center, Soft & Pliable
CAT. NO.
7599E - Max. Length: 5’ 8”
7699E - Max. Length: 6’
7799E - Max. Length: 6’ 6”
7899E - Max. Length: 7’
This is one of the best wearing and most popular pole straps ever made. Double
thickness latigo leather with nylon center which serves as a wear indicator. The leather
adheres to the pole well with less slide. One piece leather is reversed before sewn to
give you rump leather on both ends of the strap. Hot waxed nylon threads are deeply
embedded to withstand hard wear. The strap will stay soft and pliable in all kinds of
weather. Locking snap hooks on both ends. Meets or exceeds applicable OSHA
requirements and ASTM and CSA standards. Width: 1-3/4”.
156
WORK
POSITIONING
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
THE BUCKSQUEEZE WOOD POLE
FALL PROTECTION SYSTEM
CATALOG NO. 483D
This is the most widely used wood pole fall protection system. Used to
fall protect line personnel from the ground to the elevated work position
and back to the ground. The BuckSqueeze user hitchhikes up and down
the pole and if the user starts to fall, the strap squeezes the pole, securing
the user and prevents a fall. While climbing over obstructions, the user
secures a secondary lanyard or positioning strap (not included) prior to
removing the BuckSqueeze. Fits distribution poles with a circumference
from 16” (5” diameter) to 50” (16” diameter).
Additional Features:
-No tongue buckle to adjust at the back of the pole.
-One disconnect to climb over an obstruction.
-Does not work itself out of adjustment.
-Friction and cam buckle adjustments at user’s sides makes it easy to
adjust for the circumference of the pole.
-3 slot dee increase the rigidity of the strap while hitchhiking.
-Carabiner with serrations for improved gripping of the pole.
-Paddle handle has a channel allowing the webbing to glide freely keeping
the strap evenly spaced while ascending or descending.
-Incorporation of a threaded removable cleat into the CAM buckle
housing improves the arresting capability in the event of a cut out.
-Friction buckle opening slightly larger resulting in easier strap adjustment.
-The link between the friction buckle and snap has been removed which
eases the adjustment to and from the pole.
WORK
POSITIONING
Cara
biner &
Carabiner
3 slot dee
channel
handle
linkless snap
ADJUSTABLE 7’ WEB LANYARD
Acceptable as a Secondary Lanyard for the BuckSqueeze
CATALOG NO. 4812Y-7
This 1-3/4” wide woven nylon positioning strap uses a friction buckle in
conjunction with a steel auto lock carabiner. The other end of the lanyard has
a #1706 locking rope snap. Lanyard is rated to 350 pounds. Length: 7’.
WORK
POSITIONING
BUCKADJUSTER ADJUSTABLE 8’ ROPE LANYARD
Acceptable as a Secondary Lanyard for the BuckSqueeze
CATALOG NO. 9-8
This stitched 1/2” diameter rope lanyard may be used as a primary work
positioning device. Green and white jacket with a red core. The lanyard
features a #1706 locking rope snap on one end and a BuckGrab (length
adjusting device) with a steel auto lock carabiner. Lanyard is rated to 350
pounds. Length: 8’.
157
Cleat
WORK
POSITIONING
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
KLEIN STEEL POLE CLIMBERS
Complete with Nylon Straps and Leather Pads
CAT. NO.
CN1972AR - Complete With Regular Adjustable Sleeves: 15” - 19”
CN1972ARL - Complete With Long Adjustable Sleeves: 17” - 21”
A rugged durable lineman’s steel pole climber that incorporates all the features
that professional users have found most desirable over the years. Adjustable
sleeves move in 1/4” increments for the most comfortable fit. Contoured leg
irons help position gaffs securely and comfortably. 4-7/16” wide stirrup provides
greater foot support. Steel split ring secures ankle strap in place and allows for
quick replacement. 1-1/2” replaceable C.C.A. gaff firmly attaches to the leg iron
with a center pin and two TORX® screws. C.C.A. gaffs are designed to penetrate
the hardest salt treated poles. Comes complete with long lasting neoprene
impregnated nylon straps and Klein #8210 cushioned leather pads. To determine
size needed, measure from instep to 1” below knee.
KLEIN CLIMBER REPLACEMENT PARTS
Klein Adjustable Sleeves and Fasteners
CAT. NO.
AR - Regular Adjustable Sleeve: 15" to 19", sold each
ARL - Long Adjustable Sleeve: 17" to 21", sold each
34910 - Adjustable Sleeve Fasteners, Set of 4
Klein Replacement Gaffs
CAT. NO.
72 - 1-1/2” C.C.A. Pole Climber Gaffs, Pair
86 - 1-9/16” Pole Climber Gaffs, Pair
Pair of gaffs supplied with TORX® screws and wrench. Klein gaffs are
interchangeable and fit all Klein replaceable gaff climbers. For your
protection, we recommend that climbers be replaced when original
gaff and two replacement gaffs have been used on the climbers.
KLEIN GAFF GUARDS
Fits Klein and Bashlin Climbers
CATALOG NO. 1972G
These plastic coated coil spring gaff guards snap onto pole climbers for
quick, convenient protection. Extra sturdy spring wire clip. Sold in pairs.
KLEIN GAFF SHARPENING KIT
For Pole and Tree Climbers
CATALOG NO. KG2
Handy kit contains: 8” fine tooth file, 3” honing stone, Klein #KG1 gaff gauge,
fully illustrated gaff sharpening instructions, and canvas roll up case.
KLEIN GAFF GAUGE
For Pole and Tree Climbers
CATALOG NO. KG1
Convenient climber gaff guide assists with sharpening gaffs and checking
proper gaff width, thickness, and point profiles. Instructions included.
158
#34910
#86
#AR
#ARL
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
THE “BUCKLITE”
OFFSET TITANIUM POLE CLIMBERS
With Regular Length Adjustable Sleeves
CAT. NO.
T94089A - Climbers W/1” Nylon Bottom Straps Only
T94089A-4N - Complete W/1” Nylon Straps & #41 Pads
T94089A-5N - Complete W1” Nylon Straps & #43 Pads
T94089A-3500C - Complete W/1” Nylon Straps & #3500C Pads
T94089A-3502C - Complete W/1” Nylon Straps & #3502C Pads
Buckingham has developed the titanium climber to provide strength, light
weight, and comfort for total confidence while climbing. Laboratory tests
have proven the titanium climber will provide years of service. The benefit
of titanium is; it's strong like steel, but lightweight like aluminum, a perfect
combination for climbers. Benefits include: Lower gaff position on the climber
prevents the gaff from being leveraged out of the pole when leaning
out, 16o angled gaff provides optimum pole penetration for a safe and
comfortable climb, and the beveled stirrup positions the lineman’s foot
flatter and more comfortably when leaning out. The suggested life is
the original set of gaffs and one replacement through normal use. Correct
climber length is measured from the boot sole under the instep to a point
1/2” below the bone projection just below the knee joint. Long sleeves
are generally preferred by people over 6’ 2”. Rated to 350 lbs. Meets or
exceeds ASTM-F887, Federal Government RR-C-430 and W.E. - CA08530.
#T94089A
Additional Features:
-11% lighter than aluminum.
-Titanium: 3 lbs., 1.8 oz.
-Aluminum: 3 lbs., 7.7 oz.
-Non-contour leg iron.
-Easily change gaff with the aid of an allen wrench.
-Accepts climber footplate.
-1-3/4” 16o gaffs.
-Offset stirrup keeps the climber at the center of the foot.
-Will accept serrated C.C.A. gaffs; order separately.
BUCKINGHAM CONTOURED AND OFFSET
STEEL POLE CLIMBERS
With Regular Length Adjustable Sleeves
STAND
ARD
OR
C.C.A.
GAFFS
!!
The contoured shank provides room for the ankle bone. Offset stirrup
keeps the climber at the center of the foot. Higher, 16o angled gaff position
reduces pressure on the upper part of the calf. Screw style replaceable
gaffs are easily changed out with an allen wrench. Available with standard
(1-3/4”) or serrated C.C.A. (1-11/16”) gaffs. Correct climber length is
measured from the boot sole under the instep to a point 1/2” below the
bone projection just below the knee joint. Long sleeves are generally
preferred by people over 6’ 2”. Rated to 350 lbs.
Buckingham Replaceable Standard Gaffs
CAT. NO.
SB94089A - Climbers W/1” Nylon Bottom Straps Only
SB94089A-4 - Complete W/1” Nylon Straps & #41 Pads
SB94089A-5 - Complete W/1” Nylon Straps & #43 Pads
SB94089A-3500C - Complete W/1” Nylon Straps & #3500C Pads
SB94089A-3502C - Complete W/1” Nylon Straps & #3502C Pads
Buckingham Replaceable Serrated C.C.A. Gaffs
(Designed to penetrate hard C.C.A. poles with ease)
CAT. NO.
SB91089A - Climbers W/1” Nylon Bottom Straps Only
SB91089A-5 - Complete W/1” Nylon Straps & #43 Pads
SB91089A-3502C - Complete W/1” Nylon Straps & #3502C Pads
159
#SB94089A
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
CLIMBER STRAPS
Nylon or Latigo Leather, Sold in Pairs
Single Piece Nylon
CAT. NO.
LENGTH
2239
22”
2439
24”
2449
24” W/Buckle Pad
2639
26”
2649
26” W/Buckle Pad
WIDTH
1”
1”
1”
1”
1”
Single Piece Latigo Leather
CAT. NO.
LENGTH
WIDTH
2234
22”
1”
2434
24”
1”
2634
26”
1”
2644
26” W/Buckle Pad
1”
2235
22”
1-1/4”
2435
24” W/Buckle Pad
1-1/4”
2635
26”
1-1/4”
2645
26” W/Buckle Pad
1-1/4”
Two Piece Nylon Foot Straps
With Split Rings
CAT. NO.
LENGTH
WIDTH
21391
26” Assembled
1”
213591
26” Assembled
1-1/4”
Two Piece Latigo Leather Foot Straps
With Split Rings
CAT. NO.
LENGTH
WIDTH
21341
26” Assembled
1”
Split Rings Only (Pair)
CATALOG NO. 9218
#9218
REPLACEMENT GAFFS AND SCREWS
FOR BUCKINGHAM CLIMBERS
CAT. NO.
T9206A - 1-3/4" 16o Replacement Pole Gaffs
with Screws, Allen Wrench, Instructions, Pair
(Fits #T94089A and #SB94089A)
T9106A - 1-11/16" 16o Serrated C.C.A. Replacement Pole Gaffs
with Screws, Allen Wrench, Instructions, Pair
(Fits #T94089A and #SB91089A)
11T - Screws Only, 4 Black Grade 8, Instructions Included
(For Buckingham Screw Style Replaceable Gaffs)
160
#T9106A
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
GAFF GAUGE FOR
BUCKINGHAM POLE CLIMBERS
Proper Use Of Your Gauge Today Can Prevent Trouble Tomorrow
CAT. NO.
6303 - Pole Gaff Shaping Gauge
6303C - CCA Pole Gaff Shaping Gauge
Correctly shaped gaffs are essential for climbing. The Buckingham gauge
is your guide to proper shaping. It is compact, uncomplicated, revealing
and indispensable. Your gauge should be a busy tool. It defines your work,
checks your progress and judges your results. In 30 seconds time the
gauge will survey the condition of your climbers and tell you what’s wrong,
where it is wrong, and what needs to be done. Comes with instructions.
Overall size: 2-1/2” x 1-1/2” x 3/4”
BUCKINGHAM GAFF MAINTENANCE KIT
CATALOG NO. 6025
Kit comes in a convenient carrying case and includes; a smooth single cut
file, pole gaff gauge, finishing hone, and complete illustrated instructions.
Instructions are in a protective covering and they show each step in the
shaping operation. Overall size: 11” x 14”.
BUCKINGHAM CLIMBER
SLEEVES AND FASTENERS
Buckingham Regular Length Adjustable Sleeves
CATALOG NO. 9204 - Regular Length Sleeves and Fasteners, Pair
The regular length sleeves adjust from 16-1/4” to 18-3/4” for standard width
stirrup climbers. Narrow stirrup climbers adjust from 14-1/2” to 17-1/4”. Each
sleeve uses two sets of fasteners. Includes 5 sets of #9215 sleeve fasteners.
Buckingham Long Length Adjustable Sleeves
CATALOG NO. 9202 - Long Length Sleeve and Fasteners, Pair
The long length sleeves adjust from 19-1/4” to 21-3/4” for standard width
stirrup climbers. Narrow stirrup climbers adjust from 17-1/4” to 20-1/4”. Each
sleeve uses two sets of fasteners. Includes 5 sets of #9215 sleeve fasteners.
#996
#9204
Buckingham Sleeve Fasteners
CAT. NO.
996 - Single Piece Threaded Fastener for Climbers With 10/32 Threaded Holes.
(Sold in packets of 4 fasteners)
9215 - Two Piece Barrel Nut Type for Climbers Without Threaded Holes.
(Sold in packets of 5 sets of fasteners)
There are two replacement sleeve fasteners; one uses a 10/32 threaded
screw, and the second uses a barrel fastener and screw. Examine the
hole in your climbers to see if they are threaded or smooth.
161
#9215
#9202
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
CLIMBER GUARDS
CATALOG NO. CG1
Climber guards are manufactured by the dipping process using the same formulation
of rubber as our lineman’s insulating gloves and sleeves. Climber guards are
furnished un-slit to accommodate any length, regular or adjustable climbers.
Accident records show an alarming number of contacts with primaries by hands
or arms, while feet are in contact with grounded secondaries, transformers, guys,
etc. The use of specially constructed rubber overshoes and rubber climber guards
is becoming more and more a constant standard. They provide the answer
simply by isolating against such accidental contacts, interposing against grounding
and helping to reduce the hazard. Sold in pairs only.
LEATHER GAFF PROTECTORS
Fits All Climbers
CAT. NO.
6009 - Buckle Fastener
60091 - Velcro Fastener
#6009
Made from high grade durable leather and designed to protect your gaffs from
damage and prevent accidents to personnel and equipment. Slips over any gaff
and held secure by your choice of fastener; buckle or velcro. Required by OSHA
1910.268(g)(3)(i) for pole climbers when not in use. Sold in pairs.
#60091
UNIVERSAL GAFF GUARDS
Fits Buckingham, Bashlin, and Klein Climbers
CATALOG NO. 6909U
This guard is designed to fit any manufacturer's permanent or replaceable gaff
pole climber. The universal gaff guard has a rubberized coated wire to protect
the gaff. It affixes to the climber easily and stays on until intentionally removed.
The universal gaff guard can not be punctured or cut as the traditional leather
models can. Utilities will need to stock only the universal gaff guard to protect
the critical gaff profile from damage and to protect against injury to the line
personnel from an unprotected gaff in their tool bag. Required by OSHA
1910.268(g)(3)(i) for pole climbers when not in use. Sold in pairs.
#6909U
LEATHER GAFF GUARD WITH BUNGEE STRAP
Fits All Climbers
CATALOG NO. 60093
#60093
Made from high grade durable leather with an attached bungee strap. Fit the
leather cover over the gaff and pull the bungee to hook it to the sleeve loop. Fits
all climbers. Required by OSHA 1910.268(g)(3)(i) for pole climbers when not in
use. Sold in pairs.
BUCKINGHAM SNAP ON GAFF GUARD
Fits Buckingham with 16o Replaceable Gaffs
CATALOG NO. 6909A
Snap on gaff guard fits all Buckingham climbers with 16o angle replaceable gaffs
(A style). Designed to protect your gaffs from damage and prevent accidents to
personnel and equipment. Required by OSHA 1910.268(g)(3)(i) for pole climbers
when not in use. Sold in pairs.
162
#6909A
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
CLIMBER FOOTPLATE
CATALOG NO. 35033
The climber footplate attaches easily to any steel or titanium climber. Two
plate construction fastened together with two screws. Simply screw the
two plates together with the rubber sole down. Standing on the pole was
never so comfortable. Instructions included. Not for use with aluminum
climbers. Overall size: 8-3/4” long x 3” wide.
“L” TUNNEL LEATHER CLIMBER PADS
Fits All Climbers
CATALOG NO. 43
The “L” Tunnel climber pad has soft 3/4” padding sandwiched between two
pieces of quality leather. All leather construction, riveted and stitched. 3
loops and a tunnel design to keep the climber stationary. Overall size: 9" x 9".
“L” LEATHER CLIMBER PADS
Fits All Climbers
CATALOG NO. 41
A quality leather “L” pad with 3 loops and a tunnel design to keep the climber
stationary. Standard quality leather construction, riveted and stitched with
3/4” padding. Ideal for the new lineman. Overall size: 8" x 8".
LEATHER "C" PADS
CAT. NO.
35032 - Fits Buckingham & Bashlin
35032KL - Fits Klein
The "C” pad is designed with a metal insert and oversized felt liner for
additional comfort. The liner edge minimizes chafing on the leg and the
metal insert prevents the climber shank from shifting on the calf, reducing
irritation. Heavy leather construction. Requires a pair of 26” straps, order
separately. 4” wide.
DUAL STRAP CLIMBER PADS
Fits All Climbers
CATALOG NO. 3127
This heavy leather felt lined pad eliminates rivets entirely and provides
increased support while helping to reduce leg irritation. The 8” wide
pad secures the climber to the leg with dual straps and the thick felt
filler prevents irritation from the climber shank rubbing the calf muscle.
Tunnel design keeps climber shank rigid. Requires two pair of 26” straps,
order separately. Overall size: 8" x 12".
163
Grove City, PA 16127-0230
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
“BIG BUCK” CLIMBER PADS
Fits All Climbers
CATALOG NO. 3118
The “Big Buck” climber pad utilizes a double strap system, that fits 1” and
1-1/4” straps, to secure the pad to the calf resulting in superior support of
the leg. An angled metal insert prevents the climber shank from shifting
on the calf and the thick felt padding adds to the overall comfort making
this pad a favorite among linemen and arborists. Includes two pair of 1”
wide, 26” long nylon straps, (#2639). Black. Overall size: 9" x 12-1/2".
VELCRO® CUSHION WRAP PADS
Fits Buckingham, Klein, and Bashlin Climbers
Continuous Wrap
CAT. NO.
3503 - 3” Wide
Cinch Loop
CAT. NO.
3503C - 3” Wide
3500 - 4” Wide
3500C - 4” Wide
The Velcro® cushion wrap pads are easy to put on and more comfortable
than conventional climber pads. Available with or without a cinch loop.
The cinch loop provides a tight fit and is a simple and secure method of
tightening the pad; Insert the billet end through the metal loop, wrap back,
pull tightly until comfortable and secure using the Velcro® fastening system.
Other benefits include: rolled edge to prevent chafing, maximum adjustability,
3/4” padding, stitched tunnel for a secure fit.
#3500C,
Cinch loop
#3503,
Continuous wrap
4” WIDE VELCRO® CUSHION WRAP PADS
WITH METAL INSERTS
Fits Buckingham, Klein, and Bashlin Climbers
Fits Buckingham and Bashlin Climbers:
Continuous Wrap
Cinch Loop for
CAT. NO.
CAT. NO.
3502 - Angled
3502C - Angled
3504 - Straight
Fits Klein Climbers:
Continuous Wrap
CAT. NO.
3502KL - Angled
#3502,
Angled,
Continuous wrap
3504C - Straight
Cinch Loop
CAT. NO.
3502CKL - Angled
#3502C,
Angled,
Cinch loop
3504KL - Straight
The Velcro ® cushion wrap pads with metal inserts are offered in a straight
or angled design. The metal insert is designed to keep the climber shank
stationary to reduce chafing to the leg. These climber pads are easy to put
on and more comfortable than conventional climber pads. Available with or
without a cinch loop. The cinch loop provides a tight fit and is a simple and
secure method of tightening the pad; Insert the billet end through the metal
loop, wrap back, pull tightly until comfortable and secure using the Velcro ®
fastening system. Other benefits include: rolled edge to prevent chafing,
maximum adjustability, 3/4” padding, stitched tunnel for a secure fit.
164
#3504,
Straight,
Continuous wrap
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
KLEIN VELCRO® CLIMBER PADS
Fits Klein, Buckingham, and Bashlin Climbers
CATALOG NO. 8220
4” of Velcro® provides the maximum amount of adjustability. Continuous
wrap with metal cinch loop for quick attachment and ease of use. Extra
wide cuff fastens around the calf to provide more support. Cushioned,
high grade leather pads for maximum comfort. Meets or exceeds the
requirements of ASTM F887.
LINEMAN’S KIT 2
Includes Everything Below
If you already have the required tools and boots this kit is for you!!
2
Order: CATALOG NO. LINE KIT 2
1
1. Yellow Bullard Hard Hat With Ratchet Headband
Designed with a wide profile and brim, this hard hat enhances ventilation and provides increased
protection from UV rays, glare, splash, rain, and greater comfort.
Cat. No. 33R (yellow)
2. Nemesis Safety Glasses
Sleek sporty style. Soft touch temples. Lightweight construction. Single lens wrap-around protection. Delivers
99.9% protection from harmful UV rays. Neck cord included. Meets ANSI Z87.1 and CSAZ94.3 standards.
Cat. No. 3000356 (smoke mirror lens with black frames)
4
3. Shelby Pigskin Leather Palm Gloves
Features include: full leather palm, wing thumb, leather knuckle strap and index finger, wrist shield,
cotton flannel palm inside, and shirred elastic back with rubberized cuff.
Cat. No. 4167 (Sizes: M, L, XL)
4. Buckingham Lightweight Full Floating Back Saver Body Belt
3
A light weight full float body belt with a Dri-lex® lined cushion pad designed to wick moisture away from the user.
An 8” backsaver with extra padding provides superior comfort and support which helps to relieve lower back
strain. Other features include: tool loops, knife snap, sleeve bag ring, tape thong, pouch tabs, and gut strap
rings. Tongue style buckle. UL-Classified, ASTM, OSHA approved. Tested to 350 lbs. Weight: 6.2 lbs.
Cat. No. 2013M (Dee ring sizes: 18-28, 30)
5. Buckingham Nybuck Pole Strap
NYBUCK is a 6-ply filament nylon woven into cloth which is impregnated with neoprene, then folded and subjected
to tremendous pressure to assure permanent bonding without raw edges which would allow moisture
penetration. Center layers are a contrasting color to warn the user of wear. Tongue buckle adjustment.
6
5
Cat. No. 386099E (length: 6 feet)
6. Nut and Bolt Bag
Durable canvas bag with metal snaps provided on nylon loops for easy attachment to belt.
Cat. No. 45100
7
7. Break-Away Belt Hook
This non-conductive yellow nylon hand-line belt hook is specially designed to bend or break if the
wearer experiences a sudden tug or pull.
Cat. No. H7
8
8. 5-Pocket Tool Pouch
10
Pouch is made from durable leather. The five pockets are designed to hold pliers, rule, screwdriver,
bugwrench, and adjustable wrench. There is also a two-way snap for a knife.
Cat. No. 4226 (tan)
9. Buckingham Adjustable Offset Pole Climbers
16 degree angled gaff position reduces pressure on the upper part of the calf. Contoured shank
provides room for ankle bone. 1-3/4” long screw style replaceable gaffs. Comes complete with 1” nylon
straps and #41 pads.
Cat. No. SB94089A-4
9
10. Gaff Guards
Universal gaff guard has a rubberized coated wire to protect the gaff. Easily attaches to climbers and
stays on until intentionally removed.
Cat. No. 6909U
11
11. Buckingham Large Vinyl Gear Bag
Heavy weight orange vinyl. Hard rubber bottom. One large outside pocket. Leather buckle strap
closure. Overall size: 10-1/2” x 24-1/2” x 18” high.
Cat. No. 4133201R5
165
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
LINEMAN’S KIT
Includes Everything On This Page
This kit is great for the apprentice lineman and has everything needed to get started.
Order: CATALOG NO. LINE KIT
2
1
1. Yellow Bullard Hard Hat With Ratchet Headband
Designed with a wide profile and brim, this hard hat enhances ventilation and provides increased
protection from UV rays, glare, splash, rain, and greater comfort.
Cat. No. 33R (yellow)
2. Uvex Genesis® Safety Glasses
Unparalleled for comfort, protection, and style. The “wrap-around” lens provide uncompromised
peripheral vision and protection.
Cat. No. S3201X (tinted anti-fog lens)
4
3. Shelby Pigskin Leather Palm Gloves
3
Features include: full leather palm, wing thumb, leather knuckle strap and index finger, wrist shield,
cotton flannel palm inside, and shirred elastic back with rubberized cuff.
Cat. No. 4167 (Sizes: M, L, XL)
4. Buckingham Journeyman’s Choice Full Floating Black Body Belt
This is the finest belt available and is hand crafted of the highest quality leather. It features a full float
body belt with a 5-1/2" foam cushioned pad reinforced with rawhide lace. The belt strap is leather with
a nylon center to provide strength and longer life. The floating dees allow the lineman a 4" lateral
movement on the pole, reducing wear of the pole strap. The leathers that make up this belt are of the
highest quality. Other standard features include: tool loops, knife snap, sleeve bag ring, tape thong,
pouch tabs, and gut strap rings. UL-Classified, ASTM, OSHA approved. Weight: 7 lbs.
Cat. No. 2000M (Dee ring sizes: 18-28, 30)
5. Buckingham Nybuck Pole Strap
NYBUCK is a 6-ply filament nylon woven into cloth which is impregnated with neoprene, then folded and subjected
to tremendous pressure to assure permanent bonding without raw edges which would allow moisture
penetration. Center layers are a contrasting color to warn the user of wear. Tongue buckle adjustment.
5
Cat. No. 386099E (length: 6 feet)
6. Nut and Bolt Bag
Durable canvas bag with metal snaps provided on nylon loops for easy attachment to belt.
Cat. No. 45100
7. Break-Away Belt Hook
This non-conductive yellow nylon hand-line belt hook is specially designed to bend or break if the
wearer experiences a sudden tug or pull.
7
6
Cat. No. H7
8
8. 5-Pocket Tool Pouch With Tools
Pouch is made from durable leather. Tools include: Klein lineman’s bolt-thread holding pliers, Klein 10”
heavy duty round shank screwdriver, Klein 10” adjustable wrench, Klein 6’ fiberglass folding ruler (outside
read), 9/16”x3/4” ratcheting bug wrench, and a skinning knife.
Cat. No. 4226 (pouch)
Cat. No. 602-10 (screwdriver)
Cat. No. BW223 (bugwrench)
Cat. No. 7084 (knife)
Cat. No. D2000-9NETH (pliers)
Cat. No. 507-10 (adjustable wrench)
Cat. No. 911-6 (6’ outside read rule)
9
9. Klein Lineman’s Double-Face Hammer
Designed for pole-line work. Drop-forged, tempered steel head that is only 3-3/4” long for use in
confined areas. Head weight: 36 oz.
11
Cat. No. 809-36
10. Klein Lineman’s Wrench
Forged from special bar steel and heat-treated. For 5/8” hardware (large end: 29/32” and 1-3/32”
openings, small end: 5/8” and 13/16” openings).
10
Cat. No. 3146
11. Buckingham Adjustable Offset Pole Climbers
16 degree angled gaff position reduces pressure on the upper part of the calf. Contoured shank
provides room for ankle bone. 1-3/4” long screw style replaceable gaffs. Comes complete with 1” nylon
straps and #41 pads.
12
Cat. No. SB94089A-4
12. Gaff Guards
Universal gaff guard has a rubberized coated wire to protect the gaff. Easily attaches to climbers and
stays on until intentionally removed.
13
Cat. No. 6909U
13. Hall’s 10" Logger Lug Sole Lineman’s Boots
(with or without steel toe)
Hall’s 10" reddish-brown pole climber, “The Boot That Breathes”. Goodyear leather storm welt construction with ski
wedge inch-wide 3 rib steel shank. 5 to 5-1/2 oz. portage oro russett upper. Cambrelle vamp lining. Removable
orthotic body cushion insoles. Vibram yellow plug logger lug outsole.
Sizes:
D: (6 - 12,13,14)
E: (6 - 12,13,14)
Cat. No. 303 (EH steel toe)
Cat. No. 304 (no steel toe)
EE: (6-1/2 - 12,13,14)
EEE: (6 - 12,13,14)
14. Buckingham Large Vinyl Gear Bag
Heavy weight orange vinyl. Hard rubber bottom. One large outside pocket. Leather buckle strap
closure. Overall size: 10-1/2” x 24-1/2” x 18” high.
Cat. No. 4133201R5
166
14
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
Grove City, PA 16127-0230
LINEMAN’S KIT WITH BUCKSQUEEZE
Includes Everything On This Page
This kit is great for the apprentice lineman and has everything needed to get started.
Order: CATALOG NO. LINE KIT - 483D
2
1. Yellow Bullard Hard Hat With Ratchet Headband
Designed with a wide profile and brim, this hard hat enhances ventilation and provides increased protection
from UV rays, glare, splash, rain, and greater comfort.
Cat. No. 33R (yellow)
2. Uvex Genesis® Safety Glasses
Unparalleled for comfort, protection, and style. The “wrap-around” lens provide uncompromised peripheral
vision and protection.
1
Cat. No. S3201X (tinted anti-fog lens)
3. Shelby Pigskin Leather Palm Gloves
3
Features include: full leather palm, wing thumb, leather knuckle strap and index finger, wrist shield, cotton
flannel palm inside, and shirred elastic back with rubberized cuff.
4
Cat. No. 4167 (Sizes: M, L, XL)
4. Buckingham Journeyman’s Choice Full Floating Black Body Belt
This is the finest belt available and is hand crafted of the highest quality leather. It features a full float body
belt with a 5-1/2" foam cushioned pad reinforced with rawhide lace. The belt strap is leather with a nylon
center to provide strength and longer life. The floating dees allow the lineman a 4" lateral movement on the
pole, reducing wear of the pole strap. The leathers that make up this belt are of the highest quality. Other
standard features include: tool loops, knife snap, sleeve bag ring, tape thong, pouch tabs, and gut strap rings.
UL-Classified, ASTM, OSHA approved. Weight: 7 lbs.
Cat. No. 2000M (Dee ring sizes: 18-28, 30)
5. Buckingham BuckSqueeze Wood Pole Fall Protection System
5
This is the most widely used wood pole fall protection system. Used to fall protect line personnel from the
ground to the elevated work position and back to the ground. The BuckSqueeze user hitchhikes up and down
the pole and if the user starts to fall, the strap squeezes the pole, securing the user and prevents a fall.
Cat. No. 483D
6. Buckingham Adjustable Web Lanyard
This 1-3/4” wide woven nylon positioning strap uses a friction buckle in conjunction with a steel auto lock carabiner.
The other end of the lanyard has a #1706 locking rope snap. Lanyard is rated to 350 pounds. Length: 7 ft.
6
Cat. No. 4812Y-7
7. Nut and Bolt Bag
Durable canvas bag with metal snaps provided on nylon loops for easy attachment to belt.
Cat. No. 45100
8
8. Break-Away Belt Hook
This non-conductive yellow nylon hand-line belt hook is specially designed to bend or break if the wearer
experiences a sudden tug or pull.
7
Cat. No. H7
9. 5-Pocket Tool Pouch With Tools
Pouch is made from durable leather. Tools include: Klein lineman’s bolt-thread holding pliers, Klein 10” heavy duty
round shank screwdriver, Klein 10” adjustable wrench, Klein 6’ fiberglass folding ruler (outside read), 9/16”x3/4”
ratcheting bug wrench, and a skinning knife.
Cat. No. BW223 (bugwrench)
Cat. No. D2000-9NETH (pliers)
Cat. No. 602-10 (screwdriver)
Cat. No. 507-10 (adjustable wrench)
Cat. No. 911-6 (6’ outside read rule)
Cat. No. 7084 (knife)
Cat. No. 4226 (pouch)
9
10. Klein Lineman’s Double-Face Hammer
Designed for pole-line work. Drop-forged, tempered steel head that is only 3-3/4” long for use in confined
areas. Head weight: 36 oz.
Cat. No. 809-36
11. Klein Lineman’s Wrench
10
12
Forged from special bar steel and heat-treated. For 5/8” hardware (large end: 29/32” and 1-3/32” openings,
small end: 5/8” and 13/16” openings).
Cat. No. 3146
11
12. Buckingham Adjustable Offset Pole Climbers
13
16 degree angled gaff position reduces pressure on the upper part of the calf. Contoured shank provides room
for ankle bone. 1-3/4” long screw style replaceable gaffs. Comes complete with 1” nylon straps and #41 pads.
Cat. No. SB94089A-4
13. Gaff Guards
Universal gaff guard has a rubberized coated wire to protect the gaff. Easily attaches to climbers and stays on
until intentionally removed.
14
Cat. No. 6909U
14. Hall’s 10" Logger Lug Sole Lineman’s Boots (with or without steel toe)
Hall’s 10" reddish-brown pole climber, “The Boot That Breathes”. Goodyear leather storm welt construction
with ski wedge inch-wide 3 rib steel shank. 5 to 5-1/2 oz. portage oro russett upper. Cambrelle vamp lining.
Removable orthotic body cushion insoles. Vibram yellow plug logger lug outsole.
Sizes:
D: (6 - 12,13,14)
E: (6 - 12,13,14)
Cat. No. 303 (EH steel toe)
Cat. No. 304 (no steel toe)
EE: (6-1/2 - 12,13,14)
EEE: (6 - 12,13,14)
15. Buckingham Large Vinyl Gear Bag
Heavy weight orange vinyl. Hard rubber bottom. One large outside pocket. Leather buckle strap closure.
Overall size: 10-1/2” x 24-1/2” x 18” high.
Cat. No. 4133201R5
167
15
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
POLYPROPYLENE HAND LINES
WITH SNAP HOOK
CAT. NO.
1803-60 - 75’ of 5/16” Rope With #443A Snap.
(Maximum safe load; 250 lbs)
#1804-60
1804-60 - 75’ of 5/16” Rope With #470 Snap.
(Maximum safe load; 250 lbs)
Made of 5/16” three strand polypropylene rope spliced to eye of snap hook.
Forged steel with swivel clevis and quick acting plunger style latch. This is
NOT an occupational protective device. Do NOT use for human support.
SNAP HOOK WITH KEEPER
CATALOG NO. 443A
General purpose forged snap hook with eye at 90° to snap opening. Maximum safe
load 1500 lbs. This is NOT an occupational protective device. Do NOT use
for human support. Eye I.D.: 1”. Throat opening: 1/2”. Overall length: 5-1/2".
SWIVEL HOOK WITH PLUNGER LATCH
CATALOG NO. 470
Made from forged steel with a quick acting plunger style latch and swivel clevis.
Designed to take 1/2" or lighter hand lines. Maximum safe load 750 lbs. This is
NOT an occupational protective device. Do NOT use for human support.
Swivel opening: 1-3/16” x 1”. Throat opening: 5/8”. Overall length: 5".
SWIVEL SNAP
CATALOG NO. HL1
Forged steel with swivel clevis and quick acting plunger style latch. Designed
to take 1/2" or lighter hand lines. Swivel action prevents accidental fouling
into secondary wires. Maximum load 750 lbs. This is NOT an occupational
protective device. Do NOT use for human support. Swivel opening: 1-3/16” x 1”.
Throat opening: 5/8”. Overall length: 5".
SWIVEL SNAP HOOK
CATALOG NO. 2012
Bronze swivel snap hook made for use on canvas buckets. Maximum safe load is
150 lbs. Not to be used on safety lines. This is NOT an occupational protective
device. Do NOT use for human support. Length: 4-3/8”. Width: 1-5/8”.
HANDLINE HOOK
CATALOG NO. HL6
Forged steel one piece handline hook from Eagle Tools used to raise and
lower material at the work site. Maximum safe load: 500 lbs. This is NOT
an occupational protective device. Do NOT use for human support.
Overall size: 5-1/2” x 3-1/8” x 1/4” thick.
168
#1803-60
Hall’s Safety Equipment
139 Gasper Rd., P.O. Box 230
HANDLINE CARRIER
CATALOG NO. 2406
This handline hook from Buckingham is a reliable tool to raise and lower
material at the work site. The welded eye and formed hook is rated to 500
lbs. This is NOT an occupational protective device. Do NOT use for
human support. Overall size: 7” x 4-3/8”.
ANCHOR HOOK
CATALOG NO. 258
Standard on Klein block & tackle #1802-30 and #H1802-30, this forged hook is
designed to slip under insulator and engage pin of cross arm. Maximum safe load
750 lbs. This is NOT an occupational protective device. Do NOT use for
human support. Eye I.D.: 5/8”. Throat opening: 1-7/8”. Overall length: 5-1/2".
FORGED HOOK
CATALOG NO. HL2
Made from forged steel this hook is designed to slip under insulator and engage
pin of cross arm. Maximum safe load 750 lbs. This is NOT an occupational
protective device. Do NOT use for human support. Eye I.D.: 5/8”. Throat
opening: 1-7/8”. Overall length: 5-1/2".
SWIVEL ANCHOR HOOK
CATALOG NO. 259
The swivel clevis on this forged hook will engage with snap on Klein block & tackle
#1802-30 and #H1802-30. Swivel prevents twisting and kinking of rope. Maximum
load 750 lbs. This is NOT an occupational protective device. Do NOT use for human
support. Swivel opening: 1-3/16”. Throat opening: 1-7/8”. Overall length: 6-1/2”.
FORGED SWIVEL HOOK
CATALOG NO. HL3
Made from forged steel, this swivel prevents twisting and kinking of rope.
Maximum safe load: 750 lbs. This is NOT an occupational protective device.
Do NOT use for human support. Swivel opening: 1”. Throat opening: 1-7/8”.
Overall length: 6-3/4”.
HOWE WIRE TOOL
CATALOG NO. 1702-20N - 7’ Long
Strap is made of tough 1” wide Klein-Kord® nylon webbing. Swivel hook is
forged steel with large opening. Shank of hook is lengthened to reach under
insulator. Other end has device to hold the load at any distance. All metal
parts are galvanized. Maximum safe load 500 lbs. This is NOT an occupational
protective device. Do NOT use for human support.
169
Grove City, PA 16127-0230
Phone: 800-227-4255
www.hallssafety.com
Fax: 724-458-0592
#H268
BLOCKS
#268
CAT. NO.
267 - Plain Block
#H267
H267 - Same As #267, But Nose Extends Over Keeper.
268 - Block with Eye To Splice Line To Block And Rope Tie-Off.
#267
H268 - Same As #268, But Nose Extends Over Keeper.
Blocks without ropes and hooks. Made of light galvanized steel and
aluminum alloy. Sheaves have bronze bushings. These are NOT
occupational protective devices. Do NOT use for human support.
KLEIN BLOCK & TACKLE
Block & Tackle With Standard Hooks
CAT. NO.
1802-30 - Furnished With; 25' of 3/8" Rope, #267 Block,
#1802-30S/R
#268 Block, and #258 Anchor Hook.
1802-30S/R - Same as #1802-30, But With Rope Spliced to
#268 Block.
1802-30S - Furnished With; 25' of 3/8" Rope, #267 Block,
#268 Block, and #259 Swivel Anchor Hook.
1802-30S S/R - Same as #1802-30S, But With Rope Spliced to
#268 Block.
Block & Tackle With Guarded Hooks
CAT. NO.
H1802-30 - Furnished With; 25' of 3/8" Rope, #H267 Block,
#H268 Block, and #258 Anchor Hook.
H1802-30S/R - Same as #H1802-30, But With Rope Spliced to
#H268 Block.
#H1802-30S/R
H1802-30S - Furnished With; 25' of 3/8" Rope, #H267 Block,
#H268 Block, and #259 Swivel Anchor Hook.
H1802-30S S/R - Same as #H1802-30, But With Rope Spliced to
#H268 Block.
These light, galvanized steel shell blocks are fitted with snubbing hooks
to hold the load in any position. Sheaves are strong, yet are lightweight
aluminum alloy with all bronze bushings. Available with standard snap
hooks or guarded snap hooks (with snap hook nose lengthened to
extend over the latch or keeper). Choice of forged hook #258 or swivel
hook #259. Both hooks fit under insulator and engage pin on cross
arm. All Klein block and tackle use high quality 3/8" diameter rope. Catalog
numbers followed by S/R have rope spliced to block. Maximum safe load
is 750 lbs. These are NOT occupational protective devices. Do NOT
use for human support.
170