LumiLedge SR | Client: IBM | Architect: The Philips Group | Location: New York, NY LumiLedge® Cove Lighting Systems www.electrix.com Cove_Brochure_062713.indd 33 33 7/1/13 10:50 AM LUMILEDGE® COVE LIGHTING SYSTEMS Architect: Pelli Clarke Pelli | Lighting Design: CBB Lighting Design | Location: New York, NY | Photography: Eskimo Studios 2 Cove_Brochure_062713.indd 2 www.electrix.com 7/1/13 10:41 AM Table of Contents LumiLedge® Cove Lighting Systems Benefits............................................................................................ 5 LumiLedge SR7 Framing System................................................................ 6 LumiLedge SR7 Gear Tray Options............................................................. 7 GTA-7........................................................................................... 8 GTB-7........................................................................................... 9 GTP-7.......................................................................................... 10 GTPS-7........................................................................................ 11 GTS-7.......................................................................................... 12 GTDS-7........................................................................................ 13 LumiLedge® Knife Cove Framing System LumiLedge Knife Cove Gear Tray Options.................................................... 15 K8 LumiLedge Cove Framing System..................................................... 17 K8 Fluorescent Luminaire.................................................................. 18 K8 LED Luminaire............................................................................ 19 K12 Cove Framing System.................................................................. 21 Lay-in Cove Lighting Lay-in Cove Lighting Options.................................................................. 23 AX Series....................................................................................... 24 EX Series....................................................................................... 26 LX Series....................................................................................... 29 L101............................................................................................ 30 i400............................................................................................. 31 www.electrix.com Cove_Brochure_062713.indd 3 3 7/1/13 10:41 AM LLSR SERIES LumiLedge Benefits Client: Monday Properties | Architect: Concept 3D 4 Cove_Brochure_062713.indd 4 www.electrix.com 7/1/13 10:42 AM 7" 3" LumiLedge® Benefits Extruded aluminum prefabricated structural frame • Significantly improves overall cove quality • Substantially reduces installation time • Eliminates the need for carpenters to build a custom cove • Cove cad files are available to incorporate in drawings Gypsum board fastens directly to the aluminum extruded frame • Creates a clean, low profile seamless cove • The gypsum is painted in project colors and blends with the space Substantial cost benefits • Predictable material and installation costs help maintain budget The cove is designed with a zero degree line of sight • This helps to eliminate field construction issues • Simplifies light fixture integration Small scale yet powerful performance • Numerous lighting fixture options to achieve desired lighting effect www.electrix.com Cove_Brochure_062713.indd 5 5 7/1/13 10:42 AM LLSR SERIES LumiLedge® Framing LumiLedge® Sheet Rock Cove System Outside corner bracket Inside corner bracket LLSR-FR7 Prefabricated Performance Cove System Supplied materials include: •Extruded aluminum cove system which improves cove quality and reduces installation time •Die-formed link brackets to ensure horizontal and vertical alignment Supplied by others: •Not included - gypsum board, metal screws, corner bead for top and bottom corner or other cove enclosure materials DIMENSIONS The LumiLedge® SR Cove Lighting System is sold in two distinct components: 1 1. The Gear Tray 2. The Cove Framing System 3" 2 7" INSTALLATION 1. Mount framing 2. Install gypsum 3. Position luminaire Fasten extrusion to vertical wall studs and attach support brackets Fasten bottom and vertical gyspsum boards- tape and compound to finish Insert the preassembled luminaire of your choice and secure all connections 6 Cove_Brochure_062713.indd 6 www.electrix.com 7/1/13 10:43 AM LumiLedge® Gear Tray Options GTA-7 GTB-7 Gear Tray A Performance Cove Luminaire Gear Tray B Performance Cove Luminaire with Reflector (see page 8) (see page 9) GTP-7 GTPS-7 Gear Tray P Performance Cove Luminaire with Adjustable Asymmetric Reflector Gear Tray PS Performance Cove Luminaire Tandem Lamp with Reflector (see page 10) (see page 11) GTS-7 GTDS-7 Gear Tray S Staggered Lamp (see page 12) www.electrix.com Cove_Brochure_062713.indd 7 Gear Tray DS One Lamp Diagonal Staggered Lamp (see page 13) 7 7/1/13 10:43 AM LLSR SERIES LumiLedge® Sheet Rock Gear Tray A-7 GTA Performance Cove Luminaire •Integral electronic HPF Class P ballast •Thermally protected and has end of life protection for T5 lamps •Sound Rating - Class A •Supplied with 12 gauge through wires •Use 90C for supply wire •Gear tray removes for easy access to ballast •Consult sales representative or factory for dimming and emergency ballast options •Compatible dimming controls provided by others •Die-formed 20 gauge cold rolled steel gear tray •Standard finish is electrostatically applied white powder coat •Thermally cured to an enamel finish with 88%+ reflectivity •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS GTA-7 54 - 54W T5 HO U - 120—277V 92" - 54W or 28W 39 - 39W T5 HO 1 - 120V E - Electronic HPF EM - Emergency Ballast 24 - 24W T5 HO 2 - 277V D1 - Digital Dimming 28 - 28W T5 21 - 21W T5 D2 - 0 to 10 volt control system 14 - 14W T5 32 - 32W T8 69" - 39W or 21W 46" - 54W or 28W 34" - 39W or 21W 22" - 24W or 14W 96" - 32W 72" - 25W 25 - 25W T8 17 - 17W T8 SECTION D4 - Lutron Hi-Lume/3D 48" - 32W D7 - Lutron EcoSystem 24" - 17W 36" - 25W PHOTOMETRY 180 150 180 ACROSS 45 ALONG 150 ACROSS 45 ALONG 120 120 2" 4 ¾" 8 Cove_Brochure_062713.indd 8 600 1200 CANDELA 90 500 1000 CANDELA CAT# LLSR7-GTA-54 CAT# LLSR7-GTA-39 REPORT NUMBER 21309 REPORT NUMBER 21310 CURVES FOR ONE 54 WATT T5 LAMP CURVES FOR ONE 39 WATT T5 LAMP EFFICIENCY 78.7% EFFICIENCY 89.5% 90 www.electrix.com 7/1/13 10:43 AM LLSR SERIES LumiLedge® Sheet Rock Gear Tray B-7 GTB Performance Cove Luminaire with Reflector •Integral electronic HPF Class P ballast •Thermally protected and has end of life protection for T5 lamps •Sound Rating - Class A •Supplied with 12 gauge through wires •Use 90C for supply wire •Gear tray removes for easy access to ballast •Consult sales representative or factory for dimming and emergency ballast options •Compatible dimming controls provided by others •Die-formed 20 gauge cold rolled steel gear tray •Standard finish is electrostatically applied white powder coat •Thermally cured to an enamel finish with 88%+ reflectivity •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS GTB-7 54 - 54W T5 HO U - 120—277V 92" - 54W or 28W 39 - 39W T5 HO 1 - 120V E - Electronic HPF EM - Emergency Ballast 24 - 24W T5 HO 2 - 277V D1 - Digital Dimming 28 - 28W T5 21 - 21W T5 D2 - 0 to 10 volt control system 14 - 14W T5 32 - 32W T8 69" - 39W or 21W 46" - 54W or 28W 34" - 39W or 21W 22" - 24W or 14W 96" - 32W 72" - 25W 25 - 25W T8 17 - 17W T8 SECTION D4 - Lutron Hi-Lume/3D 48" - 32W D7 - Lutron EcoSystem 24" - 17W 36" - 25W PHOTOMETRY 180 150 180 ACROSS 45 ALONG 150 ACROSS 45 ALONG 120 120 2" 4 ¾" www.electrix.com Cove_Brochure_062713.indd 9 600 1200 CANDELA 90 400 CAT# LLSR7-GTB-54 CAT# LLSR-GTB-39 REPORT NUMBER 21311 REPORT NUMBER 21312 CURVES FOR ONE 54 WATT T5 CURVES FOR ONE 39 WATT T5 EFFICIENCY 87.5% EFFICIENCY 85.8% 800 CANDELA 90 9 7/1/13 10:43 AM LLSR SERIES LumiLedge® Sheet Rock Gear Tray P-7 GTP Performance Cove Luminaire with Adjustable Asymmetrical Reflector •Integral electronic HPF Class P ballast •Thermally protected and has end of life protection for T5 lamps •Sound Rating - Class A •Supplied with 12 gauge through wires •Use 90C for supply wire •Gear tray removes for easy access to ballast •Consult sales representative or factory for dimming and emergency ballast options •Compatible dimming controls provided by others •Die-formed 20 gauge cold rolled steel gear tray •Standard finish is electrostatically applied white powder coat •Thermally cured to an enamel finish with 88%+ reflectivity •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS GTP-7 54 - 54W T5 HO U - 120—277V 92" - 54W or 28W 39 - 39W T5 HO 1 - 120V E - Electronic HPF EM - Emergency Ballast 24 - 24W T5 HO 2 - 277V 69" - 39W or 21W D1 - Digital Dimming 28 - 28W T5 21 - 21W T5 46" - 54W or 28W 34" - 39W or 21W D2 - 0 to 10 volt control system 14 - 14W T5 22" - 24W or 14W D4 - Lutron Hi-Lume/3D D7 - Lutron EcoSystem SECTION PHOTOMETRY 180 150 180 150 ACROSS 45 ALONG 35° ACROSS 45 ALONG 120 120 2 ¼" 4 ⅝" (To outside of link bracket stud) 10 Cove_Brochure_062713.indd 10 350 700 1500 1400 1750 90 2100 CANDELA 250 500 750 1000 CAT# LLSR7-GTP-54 CAT# LLSR7-GTP-39 REPORT NUMBER 21313 REPORT NUMBER 21314 CURVES FOR ONE 54 WATT T5 LAMP CURVES FOR ONE 39 WATT T5 LAMP EFFICIENCY 68.4% EFFICIENCY 75.7% 1250 90 1500 CANDELA www.electrix.com 7/1/13 10:43 AM LLSR SERIES LumiLedge® Sheet Rock Gear Tray PS-7 GTPS Performance Cove Luminaire / Tandem Lamp with Reflector •Integral electronic HPF Class P ballast •Thermally protected and has end of life protection for T5 lamps •Sound Rating - Class A •Supplied with 12 gauge through wires •Use 90C for supply wire •Gear tray removes for easy access to ballast •Consult sales representative or factory for dimming and emergency ballast options •Compatible dimming controls provided by others •Die-formed 20 gauge cold rolled steel gear tray •Standard finish is electrostatically applied white powder coat •Thermally cured to an enamel finish with 88%+ reflectivity •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS GTPS-7 54 - 54W T5 HO U - 120—277V 52" - 54W or 28W 39 - 39W T5 HO 1 - 120V E - Electronic HPF EM - Emergency Ballast 24 - 24W T5 HO 2 - 277V D1 - Digital Dimming 28" - 24W or 14W 28 - 28W T5 21 - 21W T5 40" - 39W or 21W D2 - 0 to 10 volt control system 14 - 14W T5 D4 - Lutron Hi-Lume/3D D7 - Lutron EcoSystem SECTION PHOTOMETRY 180 150 180 ACROSS 45 ALONG 35° 150 ACROSS 45 ALONG 120 120 2 ¼" 4 ⅝" (To outside of link bracket stud) www.electrix.com Cove_Brochure_062713.indd 11 1500 3000 CANDELA 90 900 1800 CANDELA CAT# LLSR-GTPS-54 CAT# LLSR-GTPS-39 REPORT NUMBER 21315 REPORT NUMBER 21316 CURVES FOR TWO 54 WATT T5 LAMPS CURVES FOR TWO 39 WATT T5 LAMPS EFFICIENCY 71.4% EFFICIENCY 76.6% 90 11 7/1/13 10:43 AM LLSR SERIES LumiLedge® Sheet Rock Gear Tray S-7 GTS-7 Two Lamp Parallel Staggered Cove Luminaire •Integral electronic HPF Class P ballast •Thermally protected and has end of life protection for T5 lamps •Sound Rating - Class A •Supplied with 12 gauge through wires •Use 90C for supply wire •Gear tray removes for easy access to ballast •Consult sales representative or factory for dimming and emergency ballast options •Compatible dimming controls provided by others •Die-formed 20 gauge cold rolled steel gear tray •Standard finish is electrostatically applied white powder coat •Thermally cured to an enamel finish with 88%+ reflectivity •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS GTS-7 54 - 54W T5 HO U - 120—277V 52" - 54W or 28W 39 - 39W T5 HO 1 - 120V E - Electronic HPF EM - Emergency Ballast 24 - 24W T5 HO 2 - 277V 40" - 39W or 21W D1 - Digital Dimming 28 - 28W T5 21 - 21W T5 28" - 24W or 14W 54" - 32W D2 - 0 to 10 volt control system 14 - 14W T5 42" - 25W 30" - 17W 32 - 32W T8 25 - 25W T8 D4 - Lutron Hi-Lume/3D 17 - 17W T8 D7 - Lutron EcoSystem SECTION PHOTOMETRY 180 150 180 ACROSS 45 ALONG 150 180 ACROSS 45 ALONG 150 ACROSS 45 ALONG 120 120 120 2" 4 ¾" 12 Cove_Brochure_062713.indd 12 1500 3000 CANDELA 90 800 1600 CANDELA 90 700 1400 CANDELA CAT# LLSR7-GTS-54 CAT# LLSR7-GTS-39 CAT# LLSR-GTS-32 REPORT NUMBER 21317 REPORT NUMBER 21318 REPORT NUMBER 21319 CURVES FOR TWO 54 WATT T5 LAMPS CURVES FOR TWO 39 WATT T5 LAMPS CURVES FOR TWO 32 WATT T8 LAMPS EFFICIENCY 84.3% EFFICIENCY 84.1% EFFICIENCY 81.4% 90 www.electrix.com 7/1/13 10:43 AM LLSR SERIES LumiLedge® Sheet Rock Gear Tray DS-7 GTDS-7 One Lamp Diagonal Staggered Cove Luminaire •Integral electronic HPF Class P ballast •Thermally protected and has end of life protection for T5 lamps •Sound Rating - Class A •Supplied with 12 gauge through wires •Use 90C for supply wire •Gear tray removes for easy access to ballast •Consult sales representative or factory for dimming and emergency ballast options •Compatible dimming controls provided by others •Die-formed 20 gauge cold rolled steel gear tray •Standard finish is electrostatically applied white powder coat •Thermally cured to an enamel finish with 88%+ reflectivity •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS GTDS-7 54 - 54W T5 HO U - 120—277V 86" - 54W or 28W 39 - 39W T5 HO 1 - 120V E - Electronic HPF EM - Emergency Ballast 24 - 24W T5 HO 2 - 277V 63" - 39W or 21W D1 - Digital Dimming 28 - 28W T5 21 - 21W T5 46" - 54W or 28W 34" - 39W or 21W D2 - 0 to 10 volt control system 14 - 14W T5 32 - 32W T8 22"L- 24W or 14W 22"R- 24W or 14W 90" - 32W 25 - 25W T8 17 - 17W T8 D4 - Lutron Hi-Lume/3D 66" - 25W D7 - Lutron EcoSystem 36" - 25W 48" - 32W 24L" - 17W 24R" - 17W SECTION PHOTOMETRY 180 150 180 ACROSS 45 ALONG 150 180 ACROSS 45 ALONG 150 ACROSS 45 ALONG 120 120 120 2 ⅛" 4 ¾" www.electrix.com Cove_Brochure_062713.indd 13 575 1150 90 475 950 90 275 550 CAT # LLSR7-GTDS-54 REPORT NUMBER 25173 CAT # LLSR7-GTDS-39 REPORT NUMBER 25172 CAT# LLSR-GTDS-24 CURVES FOR ONE 54 WATT T5 LAMP CURVES FOR ONE 39 WATT T5 LAMP CURVES FOR ONE 24 WATT T5 LAMP EFFICIENCY 85.5% EFFICIENCY 97.6% EFFICIENCY 91.1% 90 REPORT NUMBER 25171 13 7/1/13 10:43 AM LUMILEDGE® KNIFE SERIES Gear Tray Options Client: The Salon | Architect: HKS | Location: Las Vegas, NV | Photography: Shy Studios 14 Cove_Brochure_062713.indd 14 www.electrix.com 7/1/13 10:44 AM LumiLedge® Knife Gear Tray Options K8 Framing Electrix gear tray luminaire fits within cove system as specified by lighting designer LumiLedge® K8 Cove Framing System (see page 17) K8 T5 K8 LED K8 Seamless T5 Fluorescent Luminaire K8 Linear LED Luminaire (see page 19) (see page 18) K12 Framing LX LX Linear LED Cove Luminaire LumiLedge® K12 Cove Framing System (see page 21) EX EX-DS EX Performance Linear Cove System (see page 26) www.electrix.com Cove_Brochure_062713.indd 15 (see page 29) EX-DS Diagonal Stagger Performance Cove Luminaire (see page 27) 15 7/1/13 10:44 AM LUMILEDGE® KNIFE SERIES K8 Cove Framing System Architect: Pelli Clarke Pelli | Lighting Design: BPI | Location: Las Vegas, NV | Photography: Shy Studios 16 Cove_Brochure_062713.indd 16 www.electrix.com 7/1/13 10:45 AM LumiLedge® K8 Cove Framing System • Proprietary sheetrock knife edge framing system for floating ceilings and vertical wall applications • Two piece extrusion system for easy installation • More cost effective than field built knife edge coves • Integrated fluorescent or LED gear tray options • Field trimmable • Inside and outside corner kits available HOW TO SPECIFY PRODUCT LENGTH LumiLedge K8 Please specify Prefabricated knife edge cove system is packaged in the following increments: • 40 feet per carton • 16 feet per carton • 8 feet per carton SECTION Floating Ceiling Vertical Wall 8 ⅝" www.electrix.com Cove_Brochure_062713.indd 17 2 ¼" 2 ¼" ⅝ GWD 8 ⅝" 17 7/1/13 10:45 AM LUMILEDGE® KNIFE SERIES K8 Seamless Fluorescent K8 Seamless T5 Fluorescent Luminaire • Integral electronic HPF Class P ballast • Thermally protected and has end of life protection for T5 lamps • Sound Rating - Class A • Supplied with 12 gauge through wires • Use 90C for supply wire • Gear tray removes for easy access to ballast • Consult sales representative or factory for dimming and emergency ballast options • Compatible dimming controls provided by others • Die-formed 20 gauge cold rolled steel gear tray • Standard finish is electrostatically applied white powder coat • Thermally cured to an enamel finish with 88%+ reflectivity • ETL listed dry locations HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH K8-S 54 - 54W T5 HO U - 120—277V 94 - 54W or 28W 39 - 39W T5 HO 1 - 120V E - Electronic HPF 24 - 24W T5 HO 2 - 277V D1 - Digital Dimming 46 - 54W or 14W D2 - 0 to 10 volt control system 23 - 24W or 14W 28 - 28W T5 21 - 21W T5 14 - 14W T5 70 - 39W or 28W 35 - 39W or 21W D4 - Lutron Hi-Lume/3D D7 - Lutron EcoSystem SECTION PHOTOMETRY 150 180 120 1 ½" 4" ACROSS 45 ALONG 250 500 90 CAT# K8-S 28 U E 46 REPORT NUMBER 73388 CURVES FOR ONE 28 WATT T5 LAMP EFFICIENCY 80.6% 18 Cove_Brochure_062713.indd 18 www.electrix.com 7/1/13 10:45 AM LUMILEDGE® KNIFE SERIES K8 Linear LED K8 Linear LED Luminaire • Low profile linear LED with lengths ranging from 22" to 88" • Proprietary optic designed for optimal transmission and diffusion • Extruded aluminum housing with satin anodized finish • Line voltage luminaires powered with 120 – 277V AC • Dimmable, high flux LEDs available in 3000K, 3500K, 4000K • Power consumption 7.6W / linear foot standard power and 10.5W / linear foot high power • Wire up to 16 fixtures (any length) in series on either 120 or 277V AC 16 amp circuit • Lumen maintenance 50,000 hours @ 70% lumen output • IES files can be downloaded at www.electrix.com • Operating temperature 20°F to 100°F • ETL listed for dry locations HOW TO SPECIFY PRODUCT POWER LENGTH LENS LED COLOR OPTION K8-L 07 - 7.6 watts per linear ft 22" M - Meso-optic diffuser W3 - 3000K ND - Non Dim W35 - 3500K D - 0-10V Dim 10 - 10.5 watts per linear ft 44" C - Clear lens W4 - 4000K DL - Lutron Ecosystem 33" 66" 88" SECTION PHOTOMETRY 150 180 120 1 ½" 0 - deg 90 - deg 180 - deg 4" 400 800 90 CAT# K8-L-10-44-W3-M-ND REPORT NUMBER ITL77131 EFFICIENCY 93.6 www.electrix.com Cove_Brochure_062713.indd 19 19 7/1/13 10:45 AM LUMILEDGE® KNIFE SERIES K12 Cove Framing System Client: Virginia Museum of Fine Arts| Architect: Rick Mather | Lighting Design: L’Observatoire 20 Cove_Brochure_062713.indd 20 www.electrix.com 7/1/13 10:46 AM LumiLedge® K12 Cove Framing System •Proprietary finished aluminum knife edge framing system •Available in standard gloss white or RAL colors •Two piece extrusion system for easy installation •Framing system is compatible with a variety of low profile gear trays •Inside and outside corner kits available •Two framing seam options - hairline and 1/8" reveal HOW TO SPECIFY PRODUCT LENGTH OPTIONS LumiLedge K12 Please specify S - Standard seam R - ⅛" Reveal LEC - Left end cap REC - Right end cap SECTION Prefabricated knife edge cove system is packaged in the following increments: • 16 feet per carton • 8 feet per carton SEAM OPTION 12" 2" Standard Seam ⅛" Seam Reveal 12 ⅝" www.electrix.com Cove_Brochure_062713.indd 21 21 7/1/13 10:46 AM LAY-IN COVE LIGHTING Client: Virginia Museum of Fine Arts| Architect: Rick Mather | Lighting Design: L’Observatoire 22 Cove_Brochure_062713.indd 22 www.electrix.com 7/1/13 10:47 AM Lay-in Cove Lighting Options AX AX-D AX T5 Performance Linear Cove System AX-D T5 Performance Linear Cove System (see page 24) (see page 25) EX EX-DS EX T5 Performance Linear Cove System EX-DS Diagonal Stagger Performance Cove Luminaire (see page 26) (see page 27) LX EX-S EX-S Seamless T5 Fluorescent Luminaire LX Linear LED Cove Luminaire (see page 28) L101 www.electrix.com Cove_Brochure_062713.indd 23 (see page 29) i400 L101 Extruded Aluminum Luminaire i400 Asymmetric LED Cove Luminaire (see page 30) (see page 31) 23 7/1/13 10:47 AM AX SERIES AX T5 Adjustable Linear Fluorescent AX T5 Performance Linear Cove System •Asymmetric reflector adjusts 35 degrees to control luminance •Reflectors lock with set screw and link to adjacent unit for even distribution •Extruded aluminum asymmetric reflector with specular finish to enhance performance •Concealed cove lighting system designed for performance T5 lamps •Direct light across the wall or ceiling with bright uniform distribution •Die cast end caps allow sockets to be back-to-back, eliminating shadows •Die cast end caps also simplify and greatly reduce installation time and cost •Electronic, High Power Factor ballasts •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS AX-T5 54 - 54W T5 HO U - 120—277V 1 - 120V E - Electronic HPF 92" - 54W or 28W 39 - 39W T5 HO EM - Emergency Ballast 24 - 24W T5 HO 2 - 277V D1 - Digital Dimming 69" - 39W or 21W D2 - 0 to 10 volt control system 22" - 24W or 14W 28 - 28W T5 21 - 21W T5 14 - 14W T5 46" - 54W or 28W 34" - 39W or 21W D4 - Lutron Hi-Lume/3D D7 - Lutron EcoSystem SECTION PHOTOMETRY 180 150 180 ACROSS 45 ALONG 150 ACROSS 45 ALONG 35° 120 120 3" Max. 5" 24 Cove_Brochure_062713.indd 24 400 1200 2000 CANDELA 90 200 600 CAT# AX 54 U E 46 CAT# AX 28 U E 46 REPORT NUMBER 17169 REPORT NUMBER 19273 CURVES FOR ONE 54 WATT T5 LAMP CURVES FOR ONE 28 WATT T5 LAMP EFFICIENCY 74.2% EFFICIENCY 75.1% 1000 CANDELA 90 www.electrix.com 7/1/13 10:47 AM AX SERIES AX-D Adjustable Linear Fluorescent AX-D T5 Performance Linear Cove System •Dual asymmetric reflectors independently adjust 35 degrees to control luminance •Reflectors lock with set screw and link to adjacent unit for even distribution •Extruded aluminum asymmetric reflector with specular finish to enhance performance •Concealed cove lighting system designed for high output performance T5 lamps •Direct light across the wall or ceiling with bright uniform distribution •Die cast end caps allow sockets to be back-to-back, eliminating shadows •Die cast end caps also simplify and greatly reduce installation time and cost •Electronic, High Power Factor ballasts HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS AX-D 54 - 54W T5 HO U - 120—277V 1 - 120V E - Electronic HPF 92" - 54W 39 - 39W T5 HO EM - Emergency Ballast 24 - 24W T5 HO 2 - 277V D1 - Digital Dimming 69" - 39W D2 - 0 to 10 volt control system 22" - 24W 46" - 54W 34" - 39W D4 - Lutron Hi-Lume/3D D7 - Lutron EcoSystem SECTION PHOTOMETRY 180 150 ACROSS 45 ALONG 35° 120 35° 4 ½" Max. 7 ½" 625 1875 3125 CANDELA 90 CAT# AX-D 54 U E 46 REPORT NUMBER 19272 CURVES FOR TWO 54 WATT T5 LAMPS EFFICIENCY 74.4% www.electrix.com Cove_Brochure_062713.indd 25 25 7/1/13 10:47 AM EX SERIES EX Low Profile Linear Fluorescent EX T5 Performance Linear Cove System •Low profile cove luminaire with only 1 ¼" height •Designed to illuminate vertical and horizontal surfaces with restricted mounting space •Die formed 20 gauge steel housing with powder coat enamel finish •High reflectance specular aluminum reflector •Optional sawtooth deflector produces a shadow-free effect •Modules are through-wired for easy installation •Electronic Integral, High Power Factor ballasts •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS EX-T5 54 - 54W T5 HO U - 120—277V 1 - 120V E - Electronic HPF 92" - 54W or 28W 39 - 39W T5 HO SD - Sawtooth Deflector 24 - 24W T5 HO 2 - 277V 46" - 54W or 28W D1 - Digital Dimming 28 - 28W T5 21 - 21W T5 69" - 39W or 21W 34" - 39W or 21W D2 - 0 to 10 volt control system 14 - 14W T5 EM - Emergency Ballast 22" - 24W or 14W D4 - Lutron Hi-Lume/3D D7 - Lutron EcoSystem SECTION PHOTOMETRY 180 180 150 ACROSS 45 ALONG 150 ACROSS 45 ALONG 120 120 1 ¼" 4" 26 Cove_Brochure_062713.indd 26 325 650 975 1300 1625 CANDELA 90 175 350 525 700 CAT# EX 54 U E 46 CAT# EX 28 U E 46 REPORT NUMBER 26458 REPORT NUMBER 19270 CURVES FOR ONE 54 WATT T5 LAMP CURVES FOR ONE 28 WATT T5 LAMP EFFICIENCY 76.5% EFFICIENCY 67.5% 875 CANDELA 90 www.electrix.com 7/1/13 10:48 AM EX SERIES EX-DS Diagonal Stagger Fluorescent EX-DS T5 Diagonal Stagger Performance Cove Luminaire • Low profile luminaire with diagonal stagger lamps to eliminate socket shadow • Designed with specular peened reflector for improved performance • Housings constructed of die formed 20 gauge cold rolled steel • Integral electronic high power factor class P ballasts • Thermally protected with end of life protection for T5 lamps; Sound Rating - Class A • Supplied with 12 gauge 90C through wires and quick connectors • Various dimming and emergency ballast options • All steel components are finished with electrostatically applied white powder coat • Thermally cured to an enamel finish with 85%+ reflectivity •ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH OPTIONS EXDS-T5 54 - 54W T5 HO U - 120—277V 1 - 120V E - Electronic HPF 88" - 54W or 28W 39 - 39W T5 HO SD - Sawtooth Deflector 24 - 24W T5 HO 2 - 277V D1 - Digital Dimming 46" - 54W or 28W D2 - 0 to 10 volt control system 22" - 24W or 14W 28 - 28W T5 21 - 21W T5 14 - 14W T5 65" - 39W or 21W 34" - 39W or 21W EM - Emergency Ballast D4 - Lutron Hi-Lume/3D D7 - Lutron EcoSystem SECTION PHOTOMETRY 180 150 180 ACROSS 45 ALONG 150 ACROSS 45 ALONG 120 120 1 ⅝" 5" www.electrix.com Cove_Brochure_062713.indd 27 800 1600 90 550 1100 CAT# EX DS 54 U E 46 CAT# EX DS 39 U E 34 REPORT NUMBER 27320 REPORT NUMBER 27321 CURVES FOR ONE 54 WATT T5 LAMP CURVES FOR ONE 39 WATT T5 LAMP EFFICIENCY 80.6% EFFICIENCY 89.0% 90 27 7/1/13 10:48 AM EX SERIES EX-S Seamless Linear Fluorescent EX-S Seamless T5 Fluorescent Luminaire • Integral electronic HPF Class P ballast • Thermally protected and has end of life protection for T5 lamps • Sound Rating - Class A • Supplied with 12 gauge through wires • Use 90C for supply wire • Gear tray removes for easy access to ballast • Consult sales representative or factory for dimming and emergency ballast options • Compatible dimming controls provided by others • Specular hammertone aluminum reflector • Housing constructed of die-formed 20 gauge cold rolled steel • Standard finish is electrostatically applied white powder coat • Thermally cured to an enamel finish with 85%+ reflectivity • ETL listed to UL 1598 HOW TO SPECIFY PRODUCT LAMP VOLTAGE BALLAST LENGTH EX-S 54 - 54W T5 HO U - 120—277V 94 - 54W or 28W 39 - 39W T5 HO 1 - 120V E - Electronic HPF 24 - 24W T5 HO 2 - 277V D1 - Digital Dimming 46 - 54W or 14W D2 - 0 to 10 volt control system 23 - 24W or 14W 28 - 28W T5 21 - 21W T5 14 - 14W T5 70 - 39W or 28W 35 - 39W or 21W D4 - Lutron Hi-Lume/3D D7 - Lutron EcoSystem SECTION PHOTOMETRY 180 150 ACROSS 45 ALONG 120 1 ¼" 4" 325 650 975 1300 90 1625 CANDELA * based on standard lamp photometry 28 Cove_Brochure_062713.indd 28 www.electrix.com 7/1/13 10:48 AM LX SERIES LX Linear LED Cove Luminaire LX Linear LED Cove Luminaire •Low profile linear LED with lengths ranging from 22" to 88" •Proprietary optic designed for optimal transmission and diffusion •Extruded aluminum housing with satin anodized finish •Line voltage luminaires powered with 120 – 277V AC •Dimmable, high flux LEDs available in 3000K, 3500K, 4000K •Power consumption 7.6W / linear foot standard power and 10.5W / linear foot high power •Wire up to 16 fixtures (any length) in series on either 120 or 277V AC 16 amp circuit •Lumen maintenance 50,000 hours @ 70% lumen output •Operating temperature 20°F to 100°F •ETL listed for dry locations HOW TO SPECIFY PRODUCT POWER LENGTH LENS LED COLOR OPTION LX 07 - 7.6 watts per linear ft 22" M - Meso-optic diffuser W3 - 3000K ND - Non Dim W35 - 3500K D - 0-10V Dim 10 - 10.5 watts per linear ft 44" C - Clear lens W4" - 4000K DL - Lutron Ecosystem 33" 66" 88" SECTION PHOTOMETRY 150 180 120 1 ½" 0 - deg 90 - deg 180 - deg 4" 400 800 90 CAT# K8-L-10-44-W3-M-ND REPORT NUMBER ITL77131 EFFICIENCY 93.6 www.electrix.com Cove_Brochure_062713.indd 29 29 7/1/13 10:48 AM LUMILINE® SERIES L101 Linear LED L101 Extruded Aluminum Luminaire • Extruded aluminum luminaire with satin anodized finish • Low profile design with lengths ranging from 12" to 96" • Proprietary optics are UV stable and optimized for transmission • Numerous stainless steel and aluminum mounting solutions • Dimmable, high flux LEDs available in either 3000K, 4000K, red, green or blue HOW TO SPECIFY PRODUCT POWER LENGTH LED COLOR BEAM SPREAD MOUNT JUMPER CABLE L101 02 - 2.2 W per ft 12" W3 - 3000K ST - Straight 24" W4 - 4000K 90C - 90 degree clear lens H - Horizontal 07 - 7.4 W per ft QR - Quick Release FL - Flex 36" RD - Red GR - Green 60" BL - Blue 90F - 90 degree satine diffuser (92% transm.) V - Vertical 48" 72" 84" 96" SECTION PHOTOMETRY 90 75 1 ⅛" 125 175 1 ¼" 60 ACROSS 45 ALONG 0 30 CAT# L101 07 36 W3 90C REPORT NUMBER 28337 30 Cove_Brochure_062713.indd 30 www.electrix.com 7/1/13 10:48 AM LUMILINE® SERIES i400 intelligent symmetrical LED i400 Asymmetric LED Cove Luminaire •Ultra slim adjustable LED luminaire with proprietary high performance asymmetric optic •Luminaire can be adjusted 90° in 5° increments to direct peak candela where desired •Designed to evenly illuminate verical and horizontal surfaces •Line voltage luminaires powered with 120 – 277V AC •Dimmable, high flux LEDs available in 3000K, 3500K, 4000K •Power consumption: Standard 8.3W / linear foot and High 10.5W / linear foot •Single plug & play cable with both power and dim control •System designed with access to driver compartment for field maintenance •Low profile linear LED with lengths ranging from 22" to 66" •Extruded aluminum LED luminaire body with locking adjustment control •Proprietary injection molded optics feature optimal transmission (91 lumens per watt%) •Extruded aluminum housing with satin anodized finish Optional Louver •Lumen maintenance 50,000 hours @ 70% lumen output •Operating temperature 20°F to 100°F HOW TO SPECIFY PRODUCT POWER LENGTH LED COLOR LENS OPTION FINISH i400 08 - 8.3 W per ft 22" W3 - 3000K 33" W35 - 3500K A - Asymmetric molded optic ND - Non Dim 10 - 10.5 W per ft SA - Satin Anodize 44" W4 - 4000K L - Anti Glare Louver DL - Lutron Hi-Lume 66" SECTION D - 0-10V Dim C - Custom PHOTOMETRY 180 150 ACROSS 45 ALONG 3" 120 1 ½" 1 ¾" 850 1700 90 CAT # I400 08 W3 44 A ND REPORT NUMBER ITL76557 www.electrix.com Cove_Brochure_062713.indd 31 31 7/1/13 10:48 AM LumiLedge SR | Client: IBM | Architect: The Philips Group | Location: New York, NY M 45 Spring Street New Haven, CT 06519 203.776.5577 www.electrix.com 32 Cove_Brochure_062713.indd 32 MADE IN U. S. A. www.electrix.com 7/1/13 10:50 AM