Olivio Grande LED
DIVISION 26 00 00
SECTION 26 56 00
ELECTRICAL
EXTERIOR LIGHTING
Part 1
1.01
General
Summary
A. Section Includes:
1. Exterior LED Luminaire, LEDs, and drivers
1.02
References
A. Tested to IESNA LM-79-08 and LM-80 Testing Standards at 25°C ambient temperature
B. Union Made Affiliated with IBEW Local 363
C. NRTL Listed for Wet Location
D. IP66 Rated
E. IDA Compliant
1.03
Definitions
A. CCT – Correlated Color Temperature
B. CRI – Color Rendering Index
C. UL – Underwriters Laboratory
D. LED – Light Emitting Diode
E. NRTL – Nationally Recognized Testing Laboratories
F. RoHS – Restriction of Hazardous Substances Directive
G. L70 – Reported Life of LED luminaire at 70% lumen maintenance
H. IBEW – International Brotherhood of Electrical Workers
I. PCI – Powder Coating Institute
J. IESNA – Illuminating Engineering Society of North America
K. LM-80 – IESNA approved method of measuring Lumen Depreciation of LED Light Sources
L. LM-79-08 – Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products or
LEDs.
M. PWM – Pulse Width Modulation
N. hrs – Hours
1.04
Performance Requirements
A. All lighting products as herein after specified shall be a standard product of the manufacturer, and shall consist of
components that will be readily available for future replacement for a period of five (5) years.
B. Provide all lighting fixtures as shown complete with all hardware necessary to install fixtures.
C. All external fasteners shall be stainless steel.
D. Fasteners shall be manufactured of non-magnetic stainless steel.
E. Luminaire shall be free of light leaks.
F. Luminaire and driver(s) suitable for use in ambient temperatures of -40ºC (-40ºF) to 40°C (104ºF).
G. LED package shall be designed around the lumen maintenance of 84.3% at 60,000 hrs. reported, and L70 calculated
to greater than 60,000 hrs.
H. All wiring shall be adequate for LEDs, Driver and Voltage requirements.
1.05
Quality Assurance
A. Manufacturer’s Qualifications:
1. Minimum 30 years’ experience in the manufacture of exterior luminaires.
2. Provide reference list of at least ten major transportation authorities, municipalities, universities, or
other high-use public environments currently using site products fabricated by the manufacturer.
Selux Corporation · 5 Lumen Lane · P.O. Box 1060 · Highland, NY 12528 · Tel.: (845) 834 1400 · Fax: (845) 834 1401 · Website: www.selux.us · Email: seluxus@selux.com
Page 1 of 4 | Rev. 04 29 2015
Olivio Grande LED
3.
4.
5.
Installer’s Qualifications: minimum 5 years’ experience assembling and installing luminaires.
All fixtures and electrical components shall be new, of good quality, and be approved by and bear an NRTL
Label (e.g. CSA, UL).
All fixtures shall meet all required national codes and regulations
1.06
Delivery, Storage, and Handling
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store components off the ground in a dry covered area, protected from adverse weather conditions.
1.07
Warranty
A. 5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited LED Warranty to the original purchaser that
the Olivio LED assembly shall be free from defects in material and workmanship for up to five (5) years from date of
shipment. This limited warranty covers the LED driver and LED light engine when installed and operated according to
Selux instructions. For details and exclusions, see “Selux Terms and Condition of Sale.”
Part 2
2.01
Products
Manufacturer
A. Manufacturer Contact:
Selux Corporation
5 Lumen Lane, P.O. Box 1060
Highland, NY 12528
phone: (845) 834-1400
fax: (845) 834-1401
toll free: (800) 735-8927
email: seluxus@selux.com
website: www.selux.us/en.html
B. Substitutions: Not permitted.
2.02
Series: OLGL (Olivio Grande LED)
A. Is a two-piece high pressure die-cast low-copper aluminum housing
B. Single recessed captive screw creates easy access to the light engine and gear tray components.
C. UV and Ozone Resistant Silicone gasket and screened tempered glass lens protects and seals the optical chamber
providing the luminaire with an IP67.
D. Luminaire will include an additional surge protection device to protect from indirect lighting strikes (up to 10kA).
E. Luminaire is “Dark Sky Friendly” IDA-Approved with the 0° Mounting Option.
2.03
Optics
A. Tempered clear glass lens
1. S09 (Spot, 9º)
2. F40 (Flood, 44º)
3. F80 (Flood, 78º)
4. ASM (Asymmetric)
B. Reflectors made from high purity aluminum to ensure high efficiencies throughout lifetime.
2.04
Mounting
A. Universal Mount
1. Surface Mounting (U)
a) 90º tilt aiming range
b) 360º swivel aiming range
c) Wall Plate is mounted to surface structure over junction box (by others)
2. Single Pole Top (T1)
Selux Corporation · 5 Lumen Lane · P.O. Box 1060 · Highland, NY 12528 · Tel.: (845) 834 1400 · Fax: (845) 834 1401 · Website: www.selux.us · Email: seluxus@selux.com
Page 2 of 4 | Rev. 04 29 2015
Olivio Grande LED
B.
B.
C.
a) 195º maximum tilt (175º total tilt aiming range)
b) 360º swivel aiming range
Candelabra
1. The luminaire shall be mounted on a 45º arm made from low copper aluminum alloy
a. Fixture head joint design optimized to fit with O-AT524 pole provides tilt-swivel range from 0º to 175º,
as well as 360º rotation
b. Locks down with set screws
c. Cast aluminum mounting arms include tenon that is inserted into a 2” I.D. pole and locked into place
with set screws
2. Mounting Options
a. Single (C1)
b. Double (C2) at 120º
c. Double (C2A) at 180º
d. Triple (C3) at 120º
Sistema Arm Mount
1. Cast aluminum mounting arms
a. Two Rivnuts per fixture arm – installed by manufacturer
2. Mounting Options
a. Single Wall Mount (W1)
b. Double Wall Mount (W2)
c. Single
d. Double at 90º
e. Double at 180º
f. Quad Pole Arms stepped at 90º
g. Sextuple Pole Arms stepped at 60º
Sistema 2 Arm Mount
1. Cast aluminum mounting arms for flexible pole mounting.
a. Fixture head join provides tilt-swivel range from 0º to 175º, and 360º rotation
b. Locks down with set screws
2. Mounting Options
a. Single
b. Double at 90º
c. Double at 180º
d. Quadruple Pole Arms stepped at 90º
e. Sextuple Pole Arms stepped at 60º
2.04
Light Engine
A. High Flux brand-name COB and vacuum metalized aluminum reflectors.
B. For future upgrades, the LED light engine can be easily removed.
C. Light Engines
1. L58 (57W)
a) S09 – 4380 lumens (3000K); 4506 lumens (4000K)
b) F40 – 4662 lumens (3000K); 4827 lumens (4000K)
c) F80 – 4226 lumens (3000K); 4348 lumens (4000K)
d) ASM – 3489 lumens (3000K); 3634 lumens (4000K)
2. L28 (28W)
2.05
CCT
A. CCT packages shall be available in 3000K and 4000K. CCT tolerances are to be kept within a 3-step MacAdam
ellipse and are to maintain a minimum CRI of 80.
Selux Corporation · 5 Lumen Lane · P.O. Box 1060 · Highland, NY 12528 · Tel.: (845) 834 1400 · Fax: (845) 834 1401 · Website: www.selux.us · Email: seluxus@selux.com
Page 3 of 4 | Rev. 04 29 2015
Olivio Grande LED
1.
2.
30 (3000K)
40 (4000K)
2.06
Finish
A. Exterior luminaire finishes shall utilize a high quality Polyester Powder Coating
1. WH (White)
2. BK (Black)
3. BZ (Bronze)
4. SV (Silver)
5. SP (Specify Premium Color)
a) All luminaires are to be finished in a Tiger Drylac certified facility and undergo a 5 stage intensive
pretreatment process where product is thoroughly cleaned, phosphate, and sealed.
b) Powered coated products shall provide excellent salt and humidity resistances, as well as an ultraviolet
resistance for color retention.
c) All products shall be tested in accordance with test specification for coatings from ASTM and PCI.
2.08
Options
A. DS (Dark Sky 0º Tilt Option)
1. Luminaire head tilt angle preset and fixed at the factory to comply with IDA Dark Sky and BUG U0 ratings.
B. DM (0-10V Dimming)
1. L58 only
2. 120-277V or 347V
3. 347V available with step-down transformer
C. HL (High-Low switching)
1. L58 only
2. 120V, 240V, or 277V only
3. Low output is 50%
D. SLH (Spread Lens Horizontal)
1. Spread Lens for horizontal light distribution
2. Replaces clear lens and intended to be used with reflectors for S09, F40, or F80 distribution
3. Preset and fixed at the factory
E. SLV (Spread Lens Vertical)
1. Spread Lens for vertical light distribution
2. Replaces clear lens and intended to be used with reflectors for S09, F40, or F80 distribution
3. Preset and fixed at the factory
F. 20kA (20kA Surge Protection)
1. Designed to protect the luminaire from electrical surge up to 20kA
G. Photocell
1. Consult factory
END OF SECTION
Selux Corporation · 5 Lumen Lane · P.O. Box 1060 · Highland, NY 12528 · Tel.: (845) 834 1400 · Fax: (845) 834 1401 · Website: www.selux.us · Email: seluxus@selux.com
Page 4 of 4 | Rev. 04 29 2015