Click on Series name for product info on aimtec.com
Series AME3-CJZ
3 Watt | AC-DC / DC-DC Converter
FEATURES:




 Class II Power supply
 Low no load consumption ≤ 0.3W
 Continuous Short Circuit Protection
I/O Isolation 3000VAC
Operating Temp: -25°C to +70°C
Input: 85-264VAC, 47-63Hz, or 100-370 VDC
Over current and Over voltage Protection
Models
Single output
Model
Input Voltage
(VAC/Hz)
Input
Voltage
(VDC)
Temperature
range
(ºC)
Output
Voltage
(V)
Output
Current max
(mA)
Maximum
capacitive
Load
(µF)
Efficiency
(%)
85-264/47-63
85-264/47-63
85-264/47-63
85-264/47-63
85-264/47-63
85-264/47-63
100-370
100-370
100-370
100-370
100-370
100-370
-25 to +70
-25 to +70
-25 to +70
-25 to +70
-25 to +70
-25 to +70
3.3
5
9
12
15
24
700
600
330
250
200
125
6000
6000
1500
1500
1000
330
66
74
75
77
77
78
AME3-3.3SCJZ
AME3-5SCJZ
AME3-9SCJZ
AME3-12SCJZ
AME3-15SCJZ
AME3-24SCJZ
Input Specifications
Parameters
Current (full load)
Inrush current <2ms (cold start)
Leakage current
External fuse
Output Specifications
Parameters
Voltage accuracy
Line regulation
Load regulation
Minimum load
Ripple & Noise
Hold up time
Isolation Specifications
Parameters
Tested I/O voltage
Isolation Resistance
General Specifications
Parameters
Switching frequency
Over Current protection
Over Voltage protection
Short circuit protection
Operating temperature
Storage temperature
Temperature coefficient
Maximum Case temperature
Humidity
Case material
www.aimtec.com
F 052e R8.A
Conditions
Typical
115 VAC
230 VAC
115 VAC
230 VAC
230VAC/50Hz, rms
Recommended slow blow type
65
30
10
20
0.1
1
Conditions
Typical
3.3V output
Others
LL-HL, Full Load
10% - 100% load, nominal input
±3
±2
±0.5
±1
10
50
50
20MHz bandwidth, 115/230VAC, Full Load
230VAC
Conditions
Maximum
Typical
60 sec
Typical
Maximum
100
Tel: +1 514 620 2722
1 of 3
%
%
%
mV p-p
ms
Units
3000
VAC
MΩ
Maximum
Units
KHz
% of Iout
Auto recovery, Continuous
-25 to +70
-25 to +105
±0.02
Non condensing
Plastic resin (flammability to UL 94V-0)
Units
Rated
7.5
12
20
30
With derating above 55°C
Units
%
115
≥110
Auto recovery
3.3/5V output
9V output
12/15V output
24V output
VAC
mA
mA
A
A
mA
A
>1000
Conditions
230
95
95
VDC
°C
°C
%/°C
°C
% RH
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AME3-CJZ
3 Watt | AC-DC / DC-DC Converter
General Specifications (continued)
Parameters
Conditions
Weight
Cooling
Dimensions (L x W x H)
MTBF
Typical
Maximum
25
Free air convection
1.46 x 0.96 x 0.71 (37.00 x 24.50 x 18.00mm)
> 300,000 hrs (MIL-HDBK -217F, t=+25oC)/Full Load
Units
g
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load
unless otherwise specified.
Safety Specifications
Parameters
Standards
cULus, CE
Information technology Equipment
EMI - Conducted and radiated emission
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity(1KV)
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
IEC/EN/UL 60950-1
EN55022, class A
IEC 61000-4-2, Contact:±6KV/Air:±8KV, Criteria B
IEC 61000-4-3, 10V/m, Criteria A
IEC 61000-4-4, ±2KV, Criteria B, with application circuit
IEC 61000-4-5, ±1KV/±2KV, Criteria B, with application circuit
IEC 61000-4-6, 10Vrms, Criteria A
IEC 61000-4-8, 10A/m, Criteria A
IEC 61000-4-11, 0-70%, Criteria B
Pin Out Specifications
Pin
Single
AC Input (L)
AC Input (N)
NC
-V Output
+V Output
37.00
(1.46)
30.48
(1.20)
0.60
(0.02)
1
24.50
(0.97)
1
3
13
14
16
Dimensions
3
13
17.78
(0.70)
Approvals
Bottom View
16
14
5.08
(0.20)
4.10
(0.16)
18.00
(0.71)
Printed Face
www.aimtec.com
F 052e R8.A
Tel: +1 514 620 2722
2 of 3
All dimensions are typical: millimeters (inches)
Pin Diameter: 0.60 ± 0.10 (0.02 ± 0.004)
Pin Pitch Tolerance: ± 0.35 (±0.014)
Case Tolerance: ± 0.5 (±0.02)
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AME3-CJZ
3 Watt | AC-DC / DC-DC Converter
Derating
Free Air Convection at 25°C
Free Air Convection
100
80
Output Power (%)
Output power (%)
100
Safe Operating Area
70
Input 100-240VAC or
120-340VDC
60
40
20
80
75
Safe Operating Area
60
50
40
20
0
0
- 25
-20
0
20
55
40
60
70
80
85 100
(100) (120)
100
Ambient Temperature º C
240
(340)
264
(370)
Input Voltage VAC (VDC)
Application circuit
Single Output
FUSE
1A/250V
4
AC L
AC L
MOV
S14K350
AC
AC N
+
DC
AC N
+ Vout
TVS
C1 C2
1µF/50V
3
‐ Vout
*GND connection not allowed
Class B compliance recommended circuit
FUSE
1A/250V
LDM
4.7µH/2A
Single Output
LCM
10‐30mH
AC N
AC L
MOV
S14K350
CX
0.1µF/
275VAC
AC N
CY1
1nF/
400VAC
CY2
1nF/
400VAC
AC
AC L
+Vout
+Vout
DC
‐ Vout
C2 +
C1
1µF/50V
TVS
‐ Vout
GND
Model
3.3 & 5 Vout
9Vout
12 & 15 Vout
24 Vout
C2
150 µF / 35V
120 µF / 35V
120 µF / 35V
68 µF / 35V
TVS
7V
12V
20V
30V
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8.A
Tel: +1 514 620 2722
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only