e
TM
PLU
PLUS

2 e
TM
A revolution in the integration of glasses within industrial safety hard hats!
With built in glasses, eye protection is always available and wearers can still use their own prescription eyewear.
The glasses provide superior eye protection, achieving
ANSI/ISEA Z87.1-2010
Z87 + (Impact Rated 300ft/s)
The protection and comfort of the wearer was of paramount importance when designing the glasses:
Extra lateral and bottom coverage provides extra protection against particles
Soft nose bridge for enhanced wearer comfort
Full adjustment has been built in to ensure the user can obtain a perfect fit; the telescopic temples can be moved in and out to cover prescription eyewear and a front pivot system allows the glasses to be adjusted closer to the wearer’s cheek for improved dust protection
Anti-scratch and anti-mist coating provides improved durability and visibility
Above all, the glasses are quick and easy to replace so that the user is never without safety eyewear!
Glasses approved to ANSI/ISEA Z87.1-2010 Z87+ (Impact rated 300ft/s)
Hard Hat approved to ANSI/ISEA Z89.1-2009 Type 1 Class C (Vented)
European standards:
Class E (Non Vented) LT (-22ºF)
Glasses approved to EN 166 1 B T and EN 170 2C-1,2
Hard Hat approved to EN 397, -40ºF, 1000V a.c, LD, MM and EN 50365
(1000V a.c. and MM - unvented only)
As well as innovative integrated eyewear, the new hard hat shell design offers new head protection advantages:
Approved to ANSI/ISEA Z89.1-2009 Type 1
Class C (vented) or E (non vented) LT
One of the largest front logo areas of any industrial safety hard hat means corporate logo's can be even more visible! ( 3.7 x 1.8in as well as side and back print areas)
Our proven and unique Venturi system provides optional ventilation for improved comfort and coolness during the warmer conditions
Our new AquaDirect Rain Management System effectively manages the rain to reduce the flow of water down your neck!
Low Temperature performance (-22°F)
AquaDirect Rain Management System
Combi accessory slot
(refer to page 7)
Centurion 6 Point Terylene cradle and premium Hydro-Flock sweatband
2 point or Linesman 4 point mounting facility
Adjustment via either standard slip headband or NEW! optional
Premium ‘Twist 2 Fit’ ratchet
3

4
PLUS
The Vision Plus offers the same head protection features as the well established
Vision hard hat but now features a new molded visor with the additional benefits of:
Approved to ANSI/ISEA Z87.1-2010 Z87+ (Impact rated 300ft/s)
Visor also approved to European standard EN 166
Grade A (620ft/s) - the highest impact protection within the European standard
Now including anti-scratch and anti-mist coating for improved durability and visibility
The new design continues to allow for prescription eyewear to be used underneath it
Molded design provides improved lower cheek coverage
Large side pull tabs enable the wearer to quickly and easily move the visor up and down even when wearing gloves
Most importantly, you can also use the new
Vision Plus visor with an existing Vision hard hat
Vision has now got even better with its new and improved visor
The Vision Plus hard hat is still the same hard hat as the original tried and trusted Vision:
Hard hat approved to ANSI/ISEA Z89.1-2009 Type 1
Class E LT
Strong ABS shell (Acrylonitrile-Butadiene-Styrene)
Extended Nape for added rear protection
Badging: front, sides and back
Centurion 6 Point Terylene cradle and headband
Premium Hydro-Flock sweatband
Either standard slip headband or optional Premium ‘Twist 2 Fit’ ratchet
2 point chinstrap mounting facility
Centurion accessory slot for fitting
CE approved face and hearing accessories
Low Temperature performance (-22°F)
Visor approved to ANSI/ISEA Z87.1-2010 Z87+ (Impact rated 300ft/s)
Hard Hat approved to ANSI/ISEA Z89.1-2009 Type 1 Class E LT (-22ºF)
European standards:
Visor approved to EN 166 1 A T, EN 170 2C-1,2
Hard Hat approved to EN 397, -40ºF , 1000V a.c, LD and MM
5

6
- No set up cost for a new logo
- The Spectrum hard hat has one of the largest front
logo size of any industrial safety hard hat!
- One of the lowest minimum order quantities of 40
- We prefer to match to Pantone references
(color match acceptable if Pantone not known)
- Most importantly, you are promoting your company
for all to see
Product Print Area on Hard Hat Max Print Size Min. Order Max Colors
Width Height Qty per position
Spectrum hard hat Front 3.7in
Sides
Back
Vision Plus hard hat Front 6
1.0in
Sides
Back
1.9in
0.8in
3.9in
Your logo here
A set of stickers especially designed for Centurion safety hard hats.
- For improving wearer visibility and safety
- Sticker set provides coverage on the front, sides,
back and top of the hard hat.
Material complies with ASTM D 4956 and EN 12899-1 Ra2 (European standard)
PLUS e
TM
Ideal for use where the wearer is required to carry out tasks hands-free in dark environments.
- Supplied with a black rubber strap for a
secure fit onto Centurion safety hard hats.
- With 3 lighting choices (1W high power LED,
LED with or without flashing)
- Beam distance of 1W power LED is over
262ft
- Brightness of 1W power LED is 60 lumens
- Fits onto all Centurion Safety Hard Hats
- Lighting duration - up to 10 hours with the
1W LED, 30 hours with non flashing 4 LEDs
or 60 hours with the flashing 4 LEDs.
- Powered via AAA batteries (not supplied)
- IP44 rated (rain resistant)
For a full list of available accessories please visit www.centurionsafety.co.uk.
Stores user identification (credit card size).
Available for the Spectrum safety hard hat.
Spectrum
Spectrum Vented
Spectrum Ratchet
Spectrum Ratchet Vented
Glasses Clear
Badge Holder
S20*A
S20*F
S20*R
S20*RF
S576
S30SBH
Vision Plus
Vision Plus Ratchet
Vision Plus Visor Clear
S10PLUSE*A
S10PLUSE*R
S577
Color options available for
Spectrum and Vision Plus:
W LB B R Y O G K E HVO HVY
High Intensity Reflective Stickers
Hard Hat LED Lamp
* Insert Color code of hard hat (i.e. W for White)
S30HIRS
S32FMHL
High Visibility Colors - slight variations in color density may be apparent over time but in no way affect the safety and performance of the product.
TM
accessory slot accepts accessory clips or approved 1.2in clips
#
#All Centurion branded accessories are compatible and approved to fit onto Centurion safety hard hats. Centurion accepts no liability for any damage caused by the fitting of other brands of accessories. Please contact the relevant accessory manufacturer direct for their opinion of the combination compatibility and confirmation of system approval.
Head and Eye Protection American Standards and Options
Standard Symbol Explanation
ANSI/ISEA Z89.1-2009 Type 1 Class C American National Standard for Industrial Head Protection
Type 1 Class E 20,000V a.c. Electrical Insulation (American National Standard for Industrial Head Protection)
Type 1 Class G 2,200V a.c. Electrical Insulation (American National Standard for Industrial Head Protection)
ANSI/ISEA Z87.1-2010
LT
Z87+
Low Temperature (-22°F)
American National Standard for Eye and Face Protection
Impact Rated (300ft/s)
Standard
EN 397:2012+A1:2012
EN 397:2012+A1:2012
EN 397:2012+A1:2012
EN 397:2012+A1:2012
EN 397:2012+A1:2012
EN 397:2012+A1:2012
EN 50365:2002
EN 166:2001
EN 166:2001
EN 166:2001
EN 166:2001
EN 170:2002
Head and Eye Protection European Standards and Options
Symbol
MM
440V/1000V a.c.
-22°F
-40°F
LD
-
-
1
A
B
T
2C-1,2
Explanation
Molten Metal
Electrical Insulation - unvented shell only (1000V a.c. currently outside the scope of EN 397:2012)
Low Temperature Performance
Low Temperature Performance (currently outside the scope of EN 397:2012)
Lateral Deformation
All hard hats perform to 122°F and 14°F
Electrically insulating hard hats for use on low voltage installations (1000V a.c.)
Optical Class
High Energy Impact (620ft/s)
Medium Energy Impact (393ft/s)
Resistance to high speed particles at extremes of temperature (23 °F and 131°F )
For use with sources which emit predominantly Ultra Violet Radiation at wave lengths shorter than
313nm and when glare is not an important factor. This covers the UVC and most of the UVB bands.
Low pressure mercury lamps such as germicidal lamps with good color recognition
7

4 page leaflet english - USA:Layout 1 13/10/2010 17:25 Page 1
For over 25 years, MPS has been providing products and services to promote safety and efficiency in mining and industry. All of our equipment is of the highest quality, backed by dependable service and trained personnel. Full Head Protection, including eye, ear, and respiratory protection which if required can be provided in a single hard hat. Industrial Fire Detection Systems, which respond instantly to sparks or flame. Progressive Mining Equipment to increase safety and productivity. With innovative equipment and personal attention, we make industry safer and more efficient.
Recently, MPS, Inc. sought out Centurion Safety Products, Ltd. to enhance our product offering to bring our customers quality, affordable products, that meet industry standards.
Centurion Safety Products is a market leading manufacturer of industrial safety helmets. Manufacturing in Norfolk, England since 1879, Centurion have produced PPE since the first World War, manufacturing helmets for the military.
Today Centurion manufactures helmets for general purpose and specialized applications as well as producing face and hearing protection accessories under the Connect brand.
MINE AND PROCESS SERVICE INC.
BOX 484, KEWANEE, ILLINOIS 61443
PHONE: 309-852-6529
FAX: 309-854-5206
E-MAIL: MAIL@GO-MPSINC.COM
WORKING TOGETHER WITH www.centurionsafety.co.uk
2