GLASS PANELS
MOUNTING OPTIONS
A wide range of tempered glass or UV treated acrylic
and polycarbonate window panels are available. All
are mechanically attached to the body and contour
gasketed to prevent insect and water penetration.
The drawings below illustrate some standard mounting
options available. Snoc will also design and manufacture
custom arm styles required on certain projects.
Polycarbonate panels are preferred for vandal prone
areas where high impact resistance is desirable.
Snoc offers 16 different glass panel options, such as:
Tiffany
prism
Clear
morocco
Clear
beveled
MAINTENANCE
The Oxford collection is designed to facilitate field
maintenance.
The top hat swings open on a single hinge and
leaves both hands free for relamping and cleaning.
Clear
seeded
Iridescent
The ballast assembly is mounted on a single tray
equipped with “quick connectors” and can be
connected or disconnected in one motion.
The ballast can easily be replaced or repaired outside
the luminaire.
Frosted
bronze
FINISHES
Snoc provides some of the toughest powder coated
finishes in the industry and extends a 5 year
warranty against peeling.
Antique and metallic finishes are reinforced with
a coat of specially formulated UV treated outdoor
lacquer to prevent fading. Snoc can also match any
RAL# for customized finishes.
Snoc offers over 30 different finish options, such as:
Black
Antique
silver
Antique bronze
Antique
copper
Pewter
Oxford
Verde
green
To view the complete selection of Snoc finishes and
glass panels, visit our web site at www.snocinc.com
OTHER OPTIONS
commercial
POLES, ORNAMENTS & ACCESSORIES
Consult our Poles, Ornaments and Accessories
brochure or visit our website at www.snocinc.com
One luminaire, a world of possibilities.
The Oxford is a traditional decorative lantern upgraded with advanced optics and several options in
mounting supports, finishes and glassware. Both symmetrical and asymmetrical light distribution
patterns are available.
R
C
LISTED
US
Conform to CSA and UL standards
The physical properties of the Snoc luminaires shown in this
catalog represent typical average values obtained in accordance
with accepted test methods and are subject to normal
manufacturing variations. They are supplied as technical guidelines
and are subject to change without notice.
Snoc offers a number of additional options for its
products, including:
Photocell
Fusing
• House side shield
•
For other specific options consult factory.
Printed in Canada
•
SNOC INC.
17200, Centrale, St-Hyacinthe
Quebec, Canada J2T 4J7
1 (800) 461-7662
www.snocinc.com
ORDERING CODES
FAMILY
Oxford
commercial
OX Oxford
LUMINAIRE COMPONENTS
•
Cast aluminum top cover and finial.
•
One piece cast aluminum body.
MOUNTINGS
1
2
3
A
B
C
D
E
F
G
H
W
Z
Heat dissipating cast aluminum ballast
housing and cover.
•
Borosilicate glass refractor for type III or
type V distributions.
•
Hinge mechanism and stopper for fast and
easy access to lamp and ballast.
•
Medium or mogul base pulse rated glazed
porcelain lampholder.
•
Versions with reflector optics installed in
the top produce illumination that conforms
to “Dark-Sky” conditions since nearly all the
light is directed below the horizontal plane.
ARM STYLES
Post top
Pedestal
On chain
Console 1
Console 2
Console 3
Console 4
Console 1-1
Console 2-1
Console 3-1
Console 4-1
Wall mount
Wood pole
O
I
L
M
N
R
S
T
SOURCES
No arm
Style I
Style L
Style M
Style N
Style R
Style S
Style T
35H
50H
70H
10H
15H
50M
70M
10M
15M
17M
20L
40L
60L
10L
INC
XX F
•
IP66 rated ballast compartment and
optics.
•
THE OXFORD FAMILY
WARRANTIES
•
Lifetime warranty on cast aluminum parts.
•
5 year warranty against paint peeling.
•
5 year warranty on LED lighting system.
Replacement parts available for a
minimum of 20 years.
•
48 series*
58 series*
68 series*
OX series
18”
The Oxford collection offers
four different luminaire sizes to
accommodate various applications.
14”
*Please refer to our Designed to last
catalog for complete construction
details on smaller versions.
11”
8”
36”
24”
15”
19”
35W HPS
50W HPS
70W HPS
100W HPS
150W HPS
50W MH
70W MH
100W MH
150W MH
175W MH
20W LED
40W LED
60W LED
100W LED
Incandescent
Fluorescent
VOLTAGES
OPTICS
1
2
3
4
5
R Refractor M Medium
G Mogul
C Chimney
& reflector 0 No
lampholder
F Reflector
0 No optics
120V
208V
240V
277V
347V
LAMPHOLDER
TYPES
1
2
3
4
5
I
II
III
IV
V
GLASS PANELS
polycarbonate
tempered
A Clear
B Opal
E
F
G
H
I
J
K
L
acrylic
C Clear
D Opal
MADE IN CANADA
decorative
Clear
M Clear seeded
Bronze
N Clear morocco
Clear beveled
O Iridescent
Bronze beveled P Tiffany prism
Frosted
Frosted bronze
Frosted clear beveled
Frosted bronze beveled
FINISHES
OX-AT
MOUNTINGS
ARM STYLES
SOURCES
Pole support arms can be used in
any of the configurations below.
Manufactured with high purity aluminum to
maximize resistance to corrosion. All arms
are available for pole and wall applications.
Consult factory for custom designs.
Offered with pulse start Metal Halide
and High Pressure Sodium (HID) lamps
and with LED lighting systems that have
excellent cold weather starting and
operating characteristics.
Post top
1
Pedestal
2
On chain
3
Console 1
A
VOLTAGES
Console 2
B
Console 3
C
The Oxford collection is available in 120V,
208V, 240V, 277V and 347V.
Style I
Style N
Style R
Style M
Style S
Compact fluorescent and incandescent
versions are also available upon request.
OPTICS/ TYPES
Console 4
D
Console 1-1
E
Reflector optics available with type I
to type V IES standard distributions
conform to “Dark-Sky” conditions.
Console 2-1
F
Refractor optics available with type III
and type V IES standard distributions.
Console 3-1
G
Console 4-1
H
Wallmount
W
Wood pole
Z
Style T
OX-AN
Style L
Wood pole mounting Z
PHOTOMETRICS
The majority of the optical systems have
been photometered for the distributions
described above.
For data in the standard IES format
required to calculate a project lighting
layout visit www.snocinc.com
BK
BL
WH
AB
VG
TC
AV
AP
BZ
AT
OR
CS
SB
VB
PE
CC
GG
Black
Blue
White
Antique bronze
Verde green
Terracotta
Antique silver
Antique copper
Architectural brown
Anthracite
Gold
Coastal sand
Satin burgundy
Victorian bronze
Pewter
Oak copper
Golden green
GR
AL
CH
LB
CB
CM
BI
GL
DB
DW
DZ
DS
FG
PG
XX
Graphite
Blue antique
Champagne
Brown leather
Copper bronze
Chocolate mousse
Birch
Glacier blue
Textutured black
Textured white
Textured bronze
Silver
Forest green
Pine green
Custom color
OTHER OPTIONS
Consult factory for other available options.
ORDERING EXAMPLE
OX - B - L - 10H - 1 - R - M - 5 - G - BK
This would order:
OX:
Oxford family
B:
Console 2 mounting
L:
Arm style L
10H: 100W HPS source
1:
120V
R:
Refractor optics
M:
Medium lampholder
5:
Type V
G:
Clear beveled tempered glass
BK:
Black finish
ORDERING CODES
FAMILY
Oxford
commercial
OX Oxford
LUMINAIRE COMPONENTS
•
Cast aluminum top cover and finial.
•
One piece cast aluminum body.
MOUNTINGS
1
2
3
A
B
C
D
E
F
G
H
W
Z
Heat dissipating cast aluminum ballast
housing and cover.
•
Borosilicate glass refractor for type III or
type V distributions.
•
Hinge mechanism and stopper for fast and
easy access to lamp and ballast.
•
Medium or mogul base pulse rated glazed
porcelain lampholder.
•
Versions with reflector optics installed in
the top produce illumination that conforms
to “Dark-Sky” conditions since nearly all the
light is directed below the horizontal plane.
ARM STYLES
Post top
Pedestal
On chain
Console 1
Console 2
Console 3
Console 4
Console 1-1
Console 2-1
Console 3-1
Console 4-1
Wall mount
Wood pole
O
I
L
M
N
R
S
T
SOURCES
No arm
Style I
Style L
Style M
Style N
Style R
Style S
Style T
35H
50H
70H
10H
15H
50M
70M
10M
15M
17M
20L
40L
60L
10L
INC
XX F
•
IP66 rated ballast compartment and
optics.
•
THE OXFORD FAMILY
WARRANTIES
•
Lifetime warranty on cast aluminum parts.
•
5 year warranty against paint peeling.
•
5 year warranty on LED lighting system.
Replacement parts available for a
minimum of 20 years.
•
48 series*
58 series*
68 series*
OX series
18”
The Oxford collection offers
four different luminaire sizes to
accommodate various applications.
14”
*Please refer to our Designed to last
catalog for complete construction
details on smaller versions.
11”
8”
36”
24”
15”
19”
35W HPS
50W HPS
70W HPS
100W HPS
150W HPS
50W MH
70W MH
100W MH
150W MH
175W MH
20W LED
40W LED
60W LED
100W LED
Incandescent
Fluorescent
VOLTAGES
OPTICS
1
2
3
4
5
R Refractor M Medium
G Mogul
C Chimney
& reflector 0 No
lampholder
F Reflector
0 No optics
120V
208V
240V
277V
347V
LAMPHOLDER
TYPES
1
2
3
4
5
I
II
III
IV
V
GLASS PANELS
polycarbonate
tempered
A Clear
B Opal
E
F
G
H
I
J
K
L
acrylic
C Clear
D Opal
MADE IN CANADA
decorative
Clear
M Clear seeded
Bronze
N Clear morocco
Clear beveled
O Iridescent
Bronze beveled P Tiffany prism
Frosted
Frosted bronze
Frosted clear beveled
Frosted bronze beveled
FINISHES
OX-AT
MOUNTINGS
ARM STYLES
SOURCES
Pole support arms can be used in
any of the configurations below.
Manufactured with high purity aluminum to
maximize resistance to corrosion. All arms
are available for pole and wall applications.
Consult factory for custom designs.
Offered with pulse start Metal Halide
and High Pressure Sodium (HID) lamps
and with LED lighting systems that have
excellent cold weather starting and
operating characteristics.
Post top
1
Pedestal
2
On chain
3
Console 1
A
VOLTAGES
Console 2
B
Console 3
C
The Oxford collection is available in 120V,
208V, 240V, 277V and 347V.
Style I
Style N
Style R
Style M
Style S
Compact fluorescent and incandescent
versions are also available upon request.
OPTICS/ TYPES
Console 4
D
Console 1-1
E
Reflector optics available with type I
to type V IES standard distributions
conform to “Dark-Sky” conditions.
Console 2-1
F
Refractor optics available with type III
and type V IES standard distributions.
Console 3-1
G
Console 4-1
H
Wallmount
W
Wood pole
Z
Style T
OX-AN
Style L
Wood pole mounting Z
PHOTOMETRICS
The majority of the optical systems have
been photometered for the distributions
described above.
For data in the standard IES format
required to calculate a project lighting
layout visit www.snocinc.com
BK
BL
WH
AB
VG
TC
AV
AP
BZ
AT
OR
CS
SB
VB
PE
CC
GG
Black
Blue
White
Antique bronze
Verde green
Terracotta
Antique silver
Antique copper
Architectural brown
Anthracite
Gold
Coastal sand
Satin burgundy
Victorian bronze
Pewter
Oak copper
Golden green
GR
AL
CH
LB
CB
CM
BI
GL
DB
DW
DZ
DS
FG
PG
XX
Graphite
Blue antique
Champagne
Brown leather
Copper bronze
Chocolate mousse
Birch
Glacier blue
Textutured black
Textured white
Textured bronze
Silver
Forest green
Pine green
Custom color
OTHER OPTIONS
Consult factory for other available options.
ORDERING EXAMPLE
OX - B - L - 10H - 1 - R - M - 5 - G - BK
This would order:
OX:
Oxford family
B:
Console 2 mounting
L:
Arm style L
10H: 100W HPS source
1:
120V
R:
Refractor optics
M:
Medium lampholder
5:
Type V
G:
Clear beveled tempered glass
BK:
Black finish
GLASS PANELS
MOUNTING OPTIONS
A wide range of tempered glass or UV treated acrylic
and polycarbonate window panels are available. All
are mechanically attached to the body and contour
gasketed to prevent insect and water penetration.
The drawings below illustrate some standard mounting
options available. Snoc will also design and manufacture
custom arm styles required on certain projects.
Polycarbonate panels are preferred for vandal prone
areas where high impact resistance is desirable.
Snoc offers 16 different glass panel options, such as:
Tiffany
prism
Clear
morocco
Clear
beveled
MAINTENANCE
The Oxford collection is designed to facilitate field
maintenance.
The top hat swings open on a single hinge and
leaves both hands free for relamping and cleaning.
Clear
seeded
Iridescent
The ballast assembly is mounted on a single tray
equipped with “quick connectors” and can be
connected or disconnected in one motion.
The ballast can easily be replaced or repaired outside
the luminaire.
Frosted
bronze
FINISHES
Snoc provides some of the toughest powder coated
finishes in the industry and extends a 5 year
warranty against peeling.
Antique and metallic finishes are reinforced with
a coat of specially formulated UV treated outdoor
lacquer to prevent fading. Snoc can also match any
RAL# for customized finishes.
Snoc offers over 30 different finish options, such as:
Black
Antique
silver
Antique bronze
Antique
copper
Pewter
Oxford
Verde
green
To view the complete selection of Snoc finishes and
glass panels, visit our web site at www.snocinc.com
OTHER OPTIONS
commercial
POLES, ORNAMENTS & ACCESSORIES
Consult our Poles, Ornaments and Accessories
brochure or visit our website at www.snocinc.com
One luminaire, a world of possibilities.
The Oxford is a traditional decorative lantern upgraded with advanced optics and several options in
mounting supports, finishes and glassware. Both symmetrical and asymmetrical light distribution
patterns are available.
R
C
LISTED
US
Conform to CSA and UL standards
The physical properties of the Snoc luminaires shown in this
catalog represent typical average values obtained in accordance
with accepted test methods and are subject to normal
manufacturing variations. They are supplied as technical guidelines
and are subject to change without notice.
Snoc offers a number of additional options for its
products, including:
Photocell
Fusing
• House side shield
•
For other specific options consult factory.
Printed in Canada
•
SNOC INC.
17200, Centrale, St-Hyacinthe
Quebec, Canada J2T 4J7
1 (800) 461-7662
www.snocinc.com
ORDERING CODES
FAMILY
Oxford
commercial
OX Oxford
LUMINAIRE COMPONENTS
•
Cast aluminum top cover and finial.
•
One piece cast aluminum body.
MOUNTINGS
1
2
3
A
B
C
D
E
F
G
H
W
Z
Heat dissipating cast aluminum ballast
housing and cover.
•
Borosilicate glass refractor for type III or
type V distributions.
•
Hinge mechanism and stopper for fast and
easy access to lamp and ballast.
•
Medium or mogul base pulse rated glazed
porcelain lampholder.
•
Versions with reflector optics installed in
the top produce illumination that conforms
to “Dark-Sky” conditions since nearly all the
light is directed below the horizontal plane.
ARM STYLES
Post top
Pedestal
On chain
Console 1
Console 2
Console 3
Console 4
Console 1-1
Console 2-1
Console 3-1
Console 4-1
Wall mount
Wood pole
O
I
L
M
N
R
S
T
SOURCES
No arm
Style I
Style L
Style M
Style N
Style R
Style S
Style T
35H
50H
70H
10H
15H
50M
70M
10M
15M
17M
20L
40L
60L
10L
INC
XX F
•
IP66 rated ballast compartment and
optics.
•
THE OXFORD FAMILY
WARRANTIES
•
Lifetime warranty on cast aluminum parts.
•
5 year warranty against paint peeling.
•
5 year warranty on LED lighting system.
Replacement parts available for a
minimum of 20 years.
•
48 series*
58 series*
68 series*
OX series
18”
The Oxford collection offers
four different luminaire sizes to
accommodate various applications.
14”
*Please refer to our Designed to last
catalog for complete construction
details on smaller versions.
11”
8”
36”
24”
15”
19”
35W HPS
50W HPS
70W HPS
100W HPS
150W HPS
50W MH
70W MH
100W MH
150W MH
175W MH
20W LED
40W LED
60W LED
100W LED
Incandescent
Fluorescent
VOLTAGES
OPTICS
1
2
3
4
5
R Refractor M Medium
G Mogul
C Chimney
& reflector 0 No
lampholder
F Reflector
0 No optics
120V
208V
240V
277V
347V
LAMPHOLDER
TYPES
1
2
3
4
5
I
II
III
IV
V
GLASS PANELS
polycarbonate
tempered
A Clear
B Opal
E
F
G
H
I
J
K
L
acrylic
C Clear
D Opal
MADE IN CANADA
decorative
Clear
M Clear seeded
Bronze
N Clear morocco
Clear beveled
O Iridescent
Bronze beveled P Tiffany prism
Frosted
Frosted bronze
Frosted clear beveled
Frosted bronze beveled
FINISHES
OX-AT
MOUNTINGS
ARM STYLES
SOURCES
Pole support arms can be used in
any of the configurations below.
Manufactured with high purity aluminum to
maximize resistance to corrosion. All arms
are available for pole and wall applications.
Consult factory for custom designs.
Offered with pulse start Metal Halide
and High Pressure Sodium (HID) lamps
and with LED lighting systems that have
excellent cold weather starting and
operating characteristics.
Post top
1
Pedestal
2
On chain
3
Console 1
A
VOLTAGES
Console 2
B
Console 3
C
The Oxford collection is available in 120V,
208V, 240V, 277V and 347V.
Style I
Style N
Style R
Style M
Style S
Compact fluorescent and incandescent
versions are also available upon request.
OPTICS/ TYPES
Console 4
D
Console 1-1
E
Reflector optics available with type I
to type V IES standard distributions
conform to “Dark-Sky” conditions.
Console 2-1
F
Refractor optics available with type III
and type V IES standard distributions.
Console 3-1
G
Console 4-1
H
Wallmount
W
Wood pole
Z
Style T
OX-AN
Style L
Wood pole mounting Z
PHOTOMETRICS
The majority of the optical systems have
been photometered for the distributions
described above.
For data in the standard IES format
required to calculate a project lighting
layout visit www.snocinc.com
BK
BL
WH
AB
VG
TC
AV
AP
BZ
AT
OR
CS
SB
VB
PE
CC
GG
Black
Blue
White
Antique bronze
Verde green
Terracotta
Antique silver
Antique copper
Architectural brown
Anthracite
Gold
Coastal sand
Satin burgundy
Victorian bronze
Pewter
Oak copper
Golden green
GR
AL
CH
LB
CB
CM
BI
GL
DB
DW
DZ
DS
FG
PG
XX
Graphite
Blue antique
Champagne
Brown leather
Copper bronze
Chocolate mousse
Birch
Glacier blue
Textutured black
Textured white
Textured bronze
Silver
Forest green
Pine green
Custom color
OTHER OPTIONS
Consult factory for other available options.
ORDERING EXAMPLE
OX - B - L - 10H - 1 - R - M - 5 - G - BK
This would order:
OX:
Oxford family
B:
Console 2 mounting
L:
Arm style L
10H: 100W HPS source
1:
120V
R:
Refractor optics
M:
Medium lampholder
5:
Type V
G:
Clear beveled tempered glass
BK:
Black finish
GLASS PANELS
MOUNTING OPTIONS
A wide range of tempered glass or UV treated acrylic
and polycarbonate window panels are available. All
are mechanically attached to the body and contour
gasketed to prevent insect and water penetration.
The drawings below illustrate some standard mounting
options available. Snoc will also design and manufacture
custom arm styles required on certain projects.
Polycarbonate panels are preferred for vandal prone
areas where high impact resistance is desirable.
Snoc offers 16 different glass panel options, such as:
Tiffany
prism
Clear
morocco
Clear
beveled
MAINTENANCE
The Oxford collection is designed to facilitate field
maintenance.
The top hat swings open on a single hinge and
leaves both hands free for relamping and cleaning.
Clear
seeded
Iridescent
The ballast assembly is mounted on a single tray
equipped with “quick connectors” and can be
connected or disconnected in one motion.
The ballast can easily be replaced or repaired outside
the luminaire.
Frosted
bronze
FINISHES
Snoc provides some of the toughest powder coated
finishes in the industry and extends a 5 year
warranty against peeling.
Antique and metallic finishes are reinforced with
a coat of specially formulated UV treated outdoor
lacquer to prevent fading. Snoc can also match any
RAL# for customized finishes.
Snoc offers over 30 different finish options, such as:
Black
Antique
silver
Antique bronze
Antique
copper
Pewter
Oxford
Verde
green
To view the complete selection of Snoc finishes and
glass panels, visit our web site at www.snocinc.com
OTHER OPTIONS
commercial
POLES, ORNAMENTS & ACCESSORIES
Consult our Poles, Ornaments and Accessories
brochure or visit our website at www.snocinc.com
One luminaire, a world of possibilities.
The Oxford is a traditional decorative lantern upgraded with advanced optics and several options in
mounting supports, finishes and glassware. Both symmetrical and asymmetrical light distribution
patterns are available.
R
C
LISTED
US
Conform to CSA and UL standards
The physical properties of the Snoc luminaires shown in this
catalog represent typical average values obtained in accordance
with accepted test methods and are subject to normal
manufacturing variations. They are supplied as technical guidelines
and are subject to change without notice.
Snoc offers a number of additional options for its
products, including:
Photocell
Fusing
• House side shield
•
For other specific options consult factory.
Printed in Canada
•
SNOC INC.
17200, Centrale, St-Hyacinthe
Quebec, Canada J2T 4J7
1 (800) 461-7662
www.snocinc.com