Wiring Diagram
4-6W LED Driver
BPWXL
DC +
LED
DC INSTALLATION NOTES:
1.
Turn off power to the circuit prior
installing. CONNECTING TO LIVE
POWER MAY CAUSE PERMANENT
DAMAGE TO THE DRIVER.
2.
Use wire nuts on all connections
and cap any unused wires.
3.
LED string (DC +/-) should be connected first, and must be connected
before powering unit on.
4.
5.
6.
If dimming (CTRL +/-) wires are not
connected, unit will function as
standard, non-dimming driver.
Connect CTRL wires to 0-10V dimming controller only. TRIAC and
PWM dimming are not supported.
When using the screw mounting
tabs, take care to not overtighten
screws.
© 2015 CITA TECHNOLOGIES, LLC
AC IN
BPWXLD
DC +
CTRL CTRL +
DC -
0-10VDC
Dimming control
LED
AC IN
Connection
Color
Min. Size
120-277 VAC
Black
300V, 18AWG
Neutral
White
300V, 18AWG
DC +
Red
22AWG
DC -
Blue
22AWG
CTRL + (Dimming, BPWXLD only)
Purple
22AWG
CTRL—(Dimming, BPWXLD only)
Grey
22AWG
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
REVISION 1.0
Wiring Diagram
10W LED Driver
INSTALLATION NOTES:
1.
Turn off power to the circuit prior
installing. CONNECTING TO LIVE
POWER MAY CAUSE PERMANENT
DAMAGE TO THE DRIVER.
2.
Use wire nuts on all connections
and cap any unused wires.
3.
LED string (DC +/-) should be connected first, and must be connected
before powering unit on.
4.
If dimming (CTRL +/-) wires are not
connected, unit will function as
standard, non-dimming driver.
5.
Connect CTRL wires to 0-10V dimming controller only. TRIAC and
PWM dimming are not supported.
6.
When using the screw mounting
tabs, take care to not overtighten
screws.
© 2015 CITA TECHNOLOGIES, LLC
BPWXL
AC IN
Connection
Color
Min. Size
120-277 VAC
Black
300V, 18AWG
Neutral
White
300V, 18AWG
DC +
Red
22AWG
DC -
Blue
22AWG
CTRL + (Dimming, BPWXLD only)
Purple
22AWG
CTRL—(Dimming, BPWXLD only)
Grey
22AWG
DC LED
DC +
BPWXLD
AC IN
DC CTRL +
CTRL DC +
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
0-10VDC
Dimming control
LED
REVISION 1.0
Wiring Diagram
CPWLD 13W LED Driver
0-10VDC
Dimming control
AC IN
GND (-)
CTRL +
DC DC +
LED
INSTALLATION NOTES:
1.
Turn off power to the circuit prior installing. CONNECTING TO LIVE POWER MAY CAUSE PERMANENT DAMAGE TO
THE DRIVER.
2.
Use wire nuts on all connections and cap any unused wires.
3.
LED string (DC +/-) should be connected first, and must be connected before powering unit on.
4.
If dimming (CTRL + / GND -) wires are not connected, unit will function as standard, non-dimming driver.
5.
6.
Connection
Color
Min. Size
120-277 VAC
Black
300V, 18AWG
Neutral
White
300V, 18AWG
DC +
Orange
22AWG
Connect CTRL wires to 0-10V dimming OR PWM controller only. TRIAC dimming is not supported.
DC -
Blue
22AWG
When using the screw mounting tabs, take care to not overtighten screws.
CTRL +
Purple
22AWG
GND (-)
Grey
22AWG
© 2015 CITA TECHNOLOGIES, LLC
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
REVISION 1.1
Wiring Diagram
CPWLD 14W LED Driver
12 VDC AUX
AC IN
0-10VDC
Dimming control
AUX +
GND (-)
CTRL +
DC DC +
LED
12V Part Designation
AUX (mA)
CPWLD xx-yyU-zzzA
100
INSTALLATION NOTES:
CPWLD xx-yyU-zzzB
200
1.
Turn off power to the circuit prior installing. CONNECTING TO LIVE POWER MAY CAUSE PERMANENT DAMAGE TO
THE DRIVER.
Connection
Color
Min. Size
120-277 VAC
Black
300V, 18AWG
2.
Use wire nuts on all connections and cap any unused wires.
Neutral
White
300V, 18AWG
3.
LED string (DC +/-) should be connected first, and must be connected before powering unit on.
DC +
Orange
22AWG
4.
If dimming (CTRL + / GND -) wires are not connected, unit will function as standard, non-dimming driver.
DC -
Blue
22AWG
5.
Connect CTRL wires to 0-10V dimming OR PWM controller only. TRIAC dimming is not supported.
CTRL +
Purple
22AWG
6.
When using the screw mounting tabs, take care to not overtighten screws.
GND (-)
Grey
22AWG
AUX 12V
Red
22AWG
© 2015 CITA TECHNOLOGIES, LLC
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
REVISION 1.1
Wiring Diagram
CPWLD 25W LED Driver
AC IN
0-10VDC
Dimming control
GND (-)
CTRL +
DC DC +
LED
INSTALLATION NOTES:
1.
Turn off power to the circuit prior installing. CONNECTING TO LIVE POWER MAY CAUSE PERMANENT DAMAGE TO
THE DRIVER.
2.
Use wire nuts on all connections and cap any unused wires.
3.
LED string (DC +/-) should be connected first, and must be connected before powering unit on.
4.
If dimming (CTRL + / GND -) wires are not connected, unit will function as standard, non-dimming driver.
5.
6.
Connection
Color
Min. Size
120-277 VAC
Black
300V, 18AWG
Neutral
White
300V, 18AWG
DC +
Orange
22AWG
Connect CTRL wires to 0-10V dimming OR PWM controller only. TRIAC dimming is not supported.
DC -
Blue
22AWG
When using the screw mounting tabs, take care to not overtighten screws.
CTRL +
Purple
22AWG
GND (-)
Grey
22AWG
© 2015 CITA TECHNOLOGIES, LLC
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
REVISION 1.1
Wiring Diagram
CPWLD 35W LED Driver
AC IN
LED
DC +
DC CTRL +
GND (-)
AUX +
0-10VDC
Dimming control
12 VDC AUX
12V Part Designation
AUX (mA)
CPWLD xx-yyU-zzzA
100
INSTALLATION NOTES:
CPWLD xx-yyU-zzzB
200
1.
Turn off power to the circuit prior installing. CONNECTING TO LIVE POWER MAY CAUSE PERMANENT DAMAGE TO
THE DRIVER.
Connection
Color
Min. Size
120-277 VAC
Black
300V, 18AWG
2.
Use wire nuts on all connections and cap any unused wires.
Neutral
White
300V, 18AWG
3.
LED string (DC +/-) should be connected first, and must be connected before powering unit on.
DC +
Orange
22AWG
4.
If dimming (CTRL + / GND -) wires are not connected, unit will function as standard, non-dimming driver.
DC -
Blue
22AWG
5.
Connect CTRL wires to 0-10V dimming OR PWM controller only. TRIAC dimming is not supported.
CTRL +
Purple
22AWG
6.
When using the screw mounting tabs, take care to not overtighten screws.
GND (-)
Grey
22AWG
AUX 12V
Red
22AWG
© 2015 CITA TECHNOLOGIES, LLC
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
REVISION 1.1