Saturn Group has now been established for 17 years and is still a privately owned company, operating from Farnworth, Bolton, Gtr. Manchester. Saturn lighting offer a comprehensive range of products under the “Preslite” trade name. Saturn lighting products include flood lighting, industrial lowbays and hi-bays, fluorescent recessed, surface, display fittings and Aquamax non - corrosive fittings, also fire alarms and emergency lighting. We also offer a conversion and repair service to the majority of other manufacturer’s fittings. All Saturn’s products are available through Electrical wholesalers and distributors throughout the UK. Saturn lighting has its own lighting and technical department, based at Bolton offering technical support and lighting schemes designed by our LIF engineers using the Relux Lighting Design Package. 1 Fluorescent & Display Fittings Section Index Page 4 Floodlighting & Amenity Section Index Page 36 Industrial Section Index Page 58 Emergency Fittings & Fire Alarm Systems Section Index Page 70 Components, Repairs INDEX & Accessories 2 Section Index Page 89 3 FLUORESCENT & DISPLAY 4 FLUORESCENT & DISPLAY Page 7 Page 8 Page 9 Page 20/21 Page 22 Page 22 Page 9 Page 10 Page 11 Page 22 Page 23 Page 23 Page 12 Page 13 Page 14/15 Page 24 Page 25 Page 25 Page 15 Page 16 Page 16 Page 26 Page 27 Page 27 Page 17 Page 18/19 Page 19 Page 27 Page 27 5 Sensors Economy Modulars Product Code Page 28 Page 29 Length Width Depth Recessed Switch Start T8 MFCC663 3 x 18W 597 597 MFCC664 4 x 18W 597 597 MFCC1263 3 x 36W 1197 597 MFCC1264 4 x 36W 1197 597 Fits both 15 mm and 25 mm T-Bar Ceiling Grids 89 89 89 89 Recessed High Frequency T8 MFHCC664 4 x 18W 597 597 89 MFHCC663 3 x 18W 597 597 89 MFHCC1264 4 x 36W 1197 597 89 Fits both 15 mm and 25 mm T-Bar Ceiling Grids All fittings supplied c/w Cat 2 louvre with wishbone attachment Recessed c/w Low Brightness Louvre Switch Start T8 MFLC664 4 x 18W 597 597 89 MFLC1264 4 x 36W 1197 597 89 Page 30 Page 32 Recessed High Frequency T8 MFHLC664 4 x 18W 597 597 89 MFHLC1264 4 x 36W 1197 597 89 Fits both 15 mm and 25 mm T-Bar Ceiling Grids All fittings supplied c/w L/Brightness louvre with wishbone attachment Recessed Switch Start T8 MFDC664 4 x 18W MFDC1264 4 x 36W 597 1197 597 597 89 89 Recessed High Frequency T8 MFHDC664 4 x 18W 597 597 89 MFHDC1264 4 x 36W 1197 597 89 Fits both 15 mm and 25 mm T-Bar Ceiling Grids All fittings supplied c/w IP44 TPb Diffuser with wishbone attachment Page 33 Page 34 EM ST DIM DIG ES SW 6 3 Hr Emergency Maintained Self Test 1 - 10v Dimmable Digitally Dimmable Electronic Starters Split Wired ® reslite Lamps not fitted FLUORESCENT Options add suffix to product code 7 Recessed Modular IP54 Recessed Modular Product Code Product Code Empty Body Switch Start MF663 3 x 18W MF664 4 x 18W MF1263 3 x 36W MF1264 4 x 36W High Frequency MFH663 3 x 18W MFH664 4 x 18W MFH1263 3 x 36W MFH1264 4 x 36W C/w with Low Brightness Louvre MFL663 3 x 18W MFL664 4 x 18W MFL1263 3 x 36W MFL1264 4 x 36W L/B Louvre Only ML663 ML664 ML1263 ML1264 C/w with Cat 2 Louvre MFC663 3 x 18W MFC664 4 x 18W MFC1263 3 x 36W MFC1264 4 x 36W Cat 2 Louvre Only MC663 MC664 MC1263 MC1264 C/w with Prismatic TPb Diffuser MFD662 2 x 18W MFD663 3 x 18W MFD664 4 x 18W MFD1263 3 x 36W MFD1264 4 x 36W TPb Diffuser Only MD66 MD66 MD66 MD126 MD126 Length Width Height High Frequency MFHD664IP 4 x 18W T8 595 595 95 MFD414IP 4 x 14W T5 595 595 95 Fittings supplied c/w TPa Diffuser The body of the fitting is fitted with a polyurethane gasket around its outside lip. To which is attached the cover frame. This is then fixed to the body by means of screws, which when fully tightened give an IP54 seal. IP65 available to order. Options add suffix to product code EM ST DIM DIG 3 Hr Emergency Maintained Self Test 1 - 10 volt Dimmable Digitally Dimmable Lamps not fitted Surface T8 Modular All these fittings and attachments are placed in the T bar by lift and tilt. 8 EM 3 Hr Emergency Maintained ES Electronic Starter MPD Dished Prismatic Diffuser MDO Flat Opal Diffuser DIM 1 - 10v Dimmable DIG Digitally Dimmable ME White Egg Crate Diffuser MES Silver Egg Crate Diffuser MFD TPA Fire Retardent Diffuser SW Split Wired Available for both 15 and 25 mm Grids Surface Modular High Frequency T8 Product Code MSHCC664 MSHCC1264 MSHCC1232 MSHCC1532 4 x 18W 4 x 36W 2 x 36W 2 x 58W Length Width Height 622 1269 1269 1569 622 324 324 324 91 91 91 91 All fittings supplied c/w Cat 2 louvre with wishbone attachement Lamps not fitted Lamps not fitted ® reslite ® reslite FLUORESCENT FLUORESCENT Options add suffix to product code 9 Recessed T5 Modulars Surface T5 Modular Recessed Modular High Frequency T5 Surface Modular High FrequencyT5 Product Code Product Code MFCC314 MFCC324 MFCC414 MFCC424 MFCC228 MFCC428 Length Width Height 3 x 14W 3 x 24W 4 x 14W 4 x 24W 2 x 28W 4 x 28W 595 595 595 595 1195 1195 595 595 595 595 295 595 MSCC414 MSCC424 MSCC228 MSCC254 MSCC235 MSCC249 MSCC280 60 60 60 60 60 60 Fits both 15 mm and 25 mm T-Bar Ceiling Grids 4 x 14W 4 x 24W 2 x 28W 2 x 54W 2 x 35W 2 x 49W 2 x 80W Product Code MFDC314 MFDC324 MFDC414 MFDC424 MSDC314 MSDC324 MFDC414 MFDC424 Length Width Height 3 x 14W 3 x 24W 4 x 14W 4 x 24W 595 595 595 595 595 595 595 595 60 60 60 60 FLUORESCENT 595 595 595 595 595 595 595 595 60 60 60 60 MSPS228 MSPS254 MSPS235 MSPS249 MSPS280 Options add suffix to product code 3 Hr Emergency Maintained Self Test 1 - 10v Dimmable Digitally Dimmable Split Wired Length Width Height 2 x 28W 2 x 54W 2 x 35W 2 x 49W 2 x 80W 1200 1200 1500 1500 1500 296 296 296 296 296 60 60 60 60 60 All fittings supplied c/w Cat 2 louvre with wishbone attachement No photograph available at time of going to print Options add suffix to product code EM ST DIM DIG SW 3 Hr Emergency Maintained Self Test 1 - 10v Dimmable Digitally Dimmable Split Wired Lamps not fitted Lamps not fitted ® ® reslite reslite FLUORESCENT 10 60 60 60 60 60 60 60 Length Width Height 3 x 14W 3 x 24W 4 x 14W 4 x 24W Product Code All fittings supplied c/w IP44 TPb Diffuser with wishbone attachement EM ST DIM DIG SW 595 595 295 295 295 295 295 All fittings supplied c/w IP44 TPb Diffuser with wishbone attachement Fits both 15 mm and 25 mm T-Bar Ceiling Grids A range of T5 energy efficient recessed modulars. The body is manufactured from sheet steel, folded and welded. It is finished in a white powder coating. The optics are attached to the fittings by four spring clips and is suitable for both 15mm and 25mm T-Bar Ceiling Grids 595 595 1195 1195 1495 1495 1495 All fittings supplied c/w Cat 2 louvre with wishbone attachement All fittings supplied c/w Cat 2 louvre with wishbone attachement Product Code Length Width Height 11 Softlight Range Softlight Range Direct/Indirect High Frequency Direct/Indirect High Frequency Product Code Length Width Height Product Code MFICC155 MFICC236 MFICC240 MFICC255 MFICC214 MFICC224 MFICC314 MFICC324 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 100mm 100mm 100mm 100mm 100mm 100mm 100mm 100mm Direct/Indirect MFDD236 2 x 36W PLL MFDD240 2 x 40W PLL MFDD255 2 x 55W PLL 1 x 55W PLL 2 x 36W PLL 2 x 40W PLL 2 x 55W PLL 2 x 14W T5 2 x 24W T5 3 x 14W T5 3 x 24W T5 Length Width Height 595 595 595 595 595 595 90 90 90 Lamps 12 Product Code Length Width Height MFIDC155/P 1 x 55W PLL MFIDC255/P 2 x 55W PLL MFIDC214 2 x 14W T5 MFIDC224 2 x 24W T5 MFIDC314 3 x 14W T5 MFIDC324 3 x 24W T5 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm 100mm 100mm 100mm 100mm 100mm 100mm Product Code Direct/Indirect MFWD414 4 x 14W T5 MFWD424 4 x 24W T5 The Softlight range of Direct/ Indirect fitting assist installers and designers meet the requirements of the LG7 lighting guide. Manufactured from sheet steel, powder coated and supplied in a Options add suffix to product code range of lamps and wattages. EM 3 Hr Emergency Maintained ST Self Test DIM 1 - 10 volt Dimmable DIG Digitally Dimmable Options add suffix to product code EM ST DIM DIG 3 Hr Emergency Maintained Self Test 1 - 10 volt Dimmable Digitally Dimmable N.B. PLL lamps fitted only T5 not supplied Lamps Length Width Height 595 595 595 595 90 90 The Softlight range of Direct/ Indirect fitting assist installers and designers meet the requirements of the LG7 lighting guide. Manufactured from sheet steel, powder coated and supplied in a range of lamps and wattages. Lamps not fitted fitted ® ® reslite reslite FLUORESCENT FLUORESCENT fitted 13 Highlight Range Highlight Range Product Code Direct/Indirect MSCEN228 MSCEN254 MSCEN235 MSCEN249 A suspended fitting, with upward and downward light distribution, helping to meet the requirements of LG7. The body is finished in silver and the louvre manufactured from Alanod anodised aluminium. Light distribution is 45% Up/55% Down 2 x 28W T5 2 x 54W T5 2 x 35W T5 2 x 49W T5 EM ST DIM DIG 165 165 165 165 Direct MSCBA228 MSCBA254 MSCBA235 MSCBA249 50 50 50 50 1195 1195 1495 1495 235 235 235 235 65 65 65 65 A fitting with the flexability to allow both surface and suspended mounting, in addition the fittings can be linked end to end to form continuous linear runs. The body is manufactured from extruded aluminium, surface anodised, silver epoxy coated and the louvre manufactured from Alanod anodised aluminium. Options add suffix to product code EM ST DIM DIG 3 Hr Emergency Maintained Self Test 1 - 10 volt Dimmable Digitally Dimmable 3 x 28W T5 3 x 54W T5 3 x 35W T5 3 x 49W T5 2 x 28W T5 2 x 54W T5 2 x 35W T5 2 x 49W T5 Length Width Height Length Width Height 1196 1196 1496 1496 262 262 262 262 3 Hr Emergency Maintained Self Test 1 - 10 volt Dimmable Digitally Dimmable Product Code Direct/Indirect MSCAA228 MSCAA254 MSCAA235 MSCAA249 58 58 58 58 2 x 28W T5 2 x 54W T5 2 x 35W T5 2 x 49W T5 Options add suffix to product code Options add suffix to product code EM ST DIM DIG EM ST DIM DIG 3 Hr Emergency Maintained Self Test 1 - 10 volt Dimmable Digitally Dimmable 3 Hr Emergency Maintained Self Test 1 - 10 volt Dimmable Digitally Dimmable Length Width Height 1230 1230 1530 1530 295 295 295 295 90 90 90 90 A suspended fitting, with upward and downward light distribution, helping to meet the requirements of LG7. The body is finished in white epoxy coated perforated sheet steel, with a PVC liner. Light distribution is 55% Up/45% Down Lamps not fitted Lamps not fitted ® ® reslite reslite FLUORESCENT FLUORESCENT Direct/Indirect MSCDA328 MSCDA354 MSCDA335 MSCDA349 14 1200 1200 1500 1500 Product Code Options add suffix to product code Product Code A suspended fitting, with upward and downward light distribution, helping to meet the requirements of LG7. The body is finished in silver and the louvre manufactured from Alanod anodised aluminium, in addition to the louvre there are opal diffusers down the edges of the fitting Light distribution is 70% Up/30% Down Length Width Height 15 Highlight Range Wall Washers & Uplighters Product Code Direct MSCSD228 MSCSD254 MSCSD235 MSCSD249 2 x 28W T5 2 x 54W T5 2 x 35W T5 2 x 49W T5 Length Width Height 1195 1195 1495 1495 460 460 460 460 High Frequency Wallwasher Product Code 130 130 130 130 MWWC155 MWWC255 1 x 55W PLL 2 x 55W PLL Length Width Height 595 1195 295 295 90 90 A versatile fitting, for both surface Options add suffix to product code EM 3 Hr Emergency Maintained and suspended mounting, which Self Test helps meet the requirements of LG7. ST 1 - 10 volt Dimmable The body is finished in white epoxy DIM DIG Digitally Dimmable coated sheet steel. The optic is epoxy coated perforated sheet steel. Product Code 16 A surface mounted fitting, with clean lines, comprising of 0.6mm white epoxy coated sheet steel base, polycarbonate end plates and a PMMA opal diffuser. It has a wide range of application in offices, Options add suffix to product code schools, retail areas and stores. EM 3 Hr Emergency Maintained ST Self Test DIM 1 - 10 volt Dimmable DIG Digitally Dimmable 1225 1225 1525 1525 1225 1225 1525 1525 166 166 166 166 166 166 166 166 65 65 65 65 65 65 65 65 Manufactured from white epoxy coated sheet steel, with an asymmetric specular reflector. The Wall Washer is ideal for use in retail applications Lamps Lamps not fitted fitted ® ® reslite reslite FLUORESCENT FLUORESCENT Direct/Indirect MSA128 1 x 28W T5 MSA154 1 x 54W T5 MSA135 1 x 35W T5 MSA149 1 x 49W T5 MSA228 2 x 28W T5 MSA254 2 x 54W T5 MSA235 2 x 35W T5 MSA249 2 x 49W T5 Length Width Height 17 Aquamax T8 IP65 Non-Corrosive 18 Length Width Depth NCC2 NCC4 NCC5 NCC6 1 x 18W 1 x 36W 1 x 58W 1 x 70W 570 1280 1580 1880 112 112 112 112 100 100 100 100 NCC22 NCC24 NCC25 NCC26 2 x 18W 2 x 36W 2 x 58W 2 x 70W 570 1280 1580 1880 166 166 166 166 100 100 100 100 NCC32 NCC34 3 x 18W 3 x 36W 570 1280 225 225 100 100 NCC42 4 x 18W 570 360 100 Product Nominal Length Code Length Width Height NCC1281 x 28W 1.2m (4ft) NCC154 1 x 54W 1.2m (4ft) NCC135 1 x 35W 1.5m (5ft) NCC149 1 x 49W1.5m (5ft) NCC180 1 x 80W 1.5m (5ft) 1280 1280 1580 1580 1580 112 112 112 112 112 100 100 100 100 100 NCC228 NCC254 NCC235 NCC249 NCC280 1280 1280 1580 1580 1580 166 166 166 166 166 100 100 100 100 100 2 x 28W 1.2m (4ft) 2 x 54W 1.2m (4ft) 2 x 35W 1.5m (5ft) 2 x 49W1.5m (5ft) 2 x 80W1.5m (5ft) The Aquamax T5 Non-Corrosive fitting comprises of an injection moulded polycarbonate body, a clear prismatic polycarbonate diffuser complete with stainless steel clips. There is a closed cell silicone gasket fitted to the body. The gear tray is attached to the body by turnbuckles and suspensions are provided to help provide easy installation and maintainance. Supplied complete with Stainless Steel Clips Gear and Accessories add suffix to product code EM EML EMR DIM DIG ST FSTB 110 TWK The Aquamax T8 Non-Corrosive Gear and Accessories add suffix to product code fitting comprises of an injection moulded polycarbonate body, a clear HF High Frequency prismatic polycarbonate diffuser E Switch Start Cold Store (-25°C) complete with stainless steel clips. EM 3hr Integral Emergency pack There is a closed cell silicone gasket EML 3hr Integral LED Emergency pack fitted to the body. The gear tray is DIM 1 - 10 volt Dimmable attached to the body by turnbuckles DIG Digitally Dimmable and suspensions are provided to EMR 3hr Remote Emergency pack help provide easy installation and ST Self Test maintainance. FSTB Fused Terminal Block 110 Site Version (110V) (not available on 6’) TRI Tripod Mounted TWK Through Wired 3hr Integral Emergency pack 3hr Integral LED Emergency pack 3hr Remote Emergency pack 1 - 10 volt Dimmable Digitally Dimmable Self Test Fused Terminal Block 110 volt version available in 14, 28 and 35 watt Through Wired IP 65 Stainless Steel Body NCCSS5 NCCSS25 1 x 58W 2 x 58W 1660 1660 Gear and Accessories add suffix to product code EM EML DIM DIG ST FSTB 3hr Integral Emergency pack 3hr Integral LED Emergency pack 1 - 10 volt Dimmable Digitally Dimmable Self Test Fused Terminal Block 165 235 130 130 The Aquamax T8 Stainless steel Non-Corrosive fitting comprises one piece pressed stainless steel body, a clear polycarbonate diffuser complete with stainless steel clips and stuffing gland Lamps not fitted Lamps not fitted ® ® reslite reslite FLUORESCENT FLUORESCENT Product Code Aquamax T5 IP65 Non-Corrosive 19 Compact Recessed Downlighters MAC MACIP Product Code Product Code Open Range MAC113 MAC118 MAC126 MAC142 1 x 13W open fitting 1 x 18W open fitting 1 x 26W open fitting 1 x 42W open fitting Drop Glass Range MAC213DG2 x 13W c/w drop glass MAC218DG2 x 18W c/w drop glass MAC226DG2 x 26W c/w drop glass MAC213 MAC218 MAC226 2 x 13W open fitting 2 x 18W open fitting 2 x 26W open fitting IP Range MAC213IP 2 x 13W c/w glass cover IP44 MAC218IP 2 x 18W c/w glass cover IP44 MAC226IP 2 x 26W c/w glass cover IP44 Turbo Louvre Range MAC213L 2 x 13W turbo louvre MAC218L 2 x 18W turbo louvre MAC226L 2 x 26W turbo louvre Options add suffix to product code Options add suffix to product code EMR ST HF DIM DIG MADG Range 240 MAL Range 165 130 215 MACL Emergency Remote Pack Self Test High Frequency High Frequency Dimmable 1-10V Digital Dimming MACIP Range 130 240 EMR ST HF DIM DIG Emergency Remote Pack Self Test High Frequency High Frequency Dimmable 1-10V Digital Dimming MACDG 215 240 130 215 240 210 Lamps Lamps fitted fitted ® ® reslite reslite FLUORESCENT FLUORESCENT MAC Range 20 Compact Recessed Downlighters 21 Compact Recessed Downlighters 2D Bulkheads Product Code Cutout (mm) Depth (mm) MACV113 HF MACV118 HF 1 x 13 w PL 1 x 18 w PL 105 160 125160 A compact vertical downlight only needing a cut out of 105mm diameter.It comes complete with high frequency ballast. The housing is manufactured from high purity polycarbonate and the reflector from aluminium with a vacuum metallic finish. Product Code Diameter Depth IP Rating PLE8 PLE16 PLE28 PLE38* PLESQ16 PLESQ28 PLESQ38 200 205 286 286 225 x 225 225 x 225 225 x 225 16W Crystal/White Base 16W Polycarbonate. 28W Polycarbonate. 38W Polycarbonate. 16W Polycarbonate.Square 28W Polycarbonate.Square 38W Polycarbonate.Square 95 80 80 80 100 100 100 IP44 IP65 IP65 IP65 IP65 IP65 IP65 *Remote Emergency Champignon Range Product Code PLECH616 PLECH628 PLECH638 16W 2D 28W 2D 38W 2D Diameter (mm) Depth (mm) 280 280 280 145 145 145 Options HF High Frequency EML LED Emergency (PLE16, PLE28, PLESQ16 and PLESQ38 only PCPhotocell WCPL Wire Cage 2D bulkheads 330mm x 330mm x 125mm B/O Black Base Opal Diffuser B/P Black Base Prismatic Diffuser W/O White Base Opal Diffuser W/P White Base Prismatic Diffuser Options add suffix to product code HF Available with brass or chrome trim HF/EM and glass diffuser. High Frequency Integral HF Ballast and 3 Hr Emergency Pack PLE8 Polo Range Product Code 22 Depth (mm) 270 330 330 80 100 100 WCPL PLESQ16/28/38 An IP54 fitting with simple lines, yet with a robust construction. Available in 16 watt and 28 watt switch start versions. The fittings are suitable for ceiling or wall mounting, for a range of interior or sheltered external applications. . Options add suffix to product code Lamps fitted HF HF/EM High Frequency Integral HF Ballast and 3 Hr Emergency Pack Lamps fitted ® ® reslite PLE16/28/38 reslite FLUORESCENT FLUORESCENT PLEPO16 16W 2D PLEPO28 28W 2D PLEPO38HF 38W 2D Diameter (mm) 23 Sign Light Range Decorative 2D Fittings Product Code Opaline Range Diameter(mm) PLEOP31616W PLEOP41616W PLEOP42828W PLEOP43838W PLEOP52828W PLEOP53838W LDOP21 Available in white (as standard), brass or chrome trim. Diffuser in opal or prismatic. 325 425 425 425 525 525 21W LED 425 Depth (mm) DFF226 IP Rating 107 117 117 117 117 117 IP44 IP44 IP44 IP44 IP44 IP44 `117 IP44 Options add suffix to product code HF HF/EM High Frequency Integral HF Ballast and 3 Hr Emergency Pack Diameter(mm) PLE541 16W425 PLE542 28W425 PLE543 38W425 Depth (mm) 117 117 117 IP Rating IP44 IP44 IP44 FLUORESCENT Product Code Length Picture ref. T8 Flourescent Version SLL118 1 x 18W T8 SLL136 1 x 36W T8 SLL158 1 x 58W T8 SLL170 1 x 70W T8 610mm 1219mm 1524mm 1829mm 2 2 2 2 SLL236 SLL258 2438mm 3048mm 2 2 610mm 1219mm 1524mm 1829mm 2438mm 3048mm 2 2 2 2 2 2 2 x 36W T8 2 x 58W T8 1 Bk Matt black body and black end caps Wh White body and white end caps Other colours available on request – please quote RAL colour number at time of ordering. High Frequency Integral HF Ballast and 3 Hr Emergency Pack Blue Filters Red Filters Green Filters IP65 2 Supplied complete with Cool White Tubes and 200mm Stand Off brackets. Other sizes of bracket available to special order. Lamps fitted ® ® reslite reslite Lamps fitted FLUORESCENT 24 HF HF/EM BLUE RED GREEN 1 Options add suffix to product code Options add suffix to product code The Haloline fitting is similar in appearence to the Opaline fitting. The rear of the fitting has Clear or coloured inserts which produces a halo effect around the fitting. Shown above is a section from the back of the fitting to show the inserts which allow the light to be emmited from the rear of the fitting. Here shown in Blue but Clear fitted as standard. 2 x 26W PL LED Version SLLS2LED SLLS4LED SLLS5LED SLLS6LED SLLS8LED SLLS10LED Haloline Range Picture ref. 25 Architectural Fittings Metal Halide Recessed and Surface Single sided amenity fitting IP40 Product Code DAS70S 70W SON R7s DAS70M 70W HQI R7s DF70C DF150C DAD70S 70W SON R7s DAD70M 70W HQI R7s DFC70 (Recessed) DFC150 (Recessed) Available with Coloured lamps BlBlue GrGreen MgMagenta 422mm 220 x 130 2 HQI Circular Fitting 150 Dia 3 150W HQI Circular Fitting 220 Dia 3 160 Dia 4 160 Dia 4 160 Dia 4 3 Coloured Lamps BlBlue GrGreen MgMagenta 314mm 147mm 2 Options add suffix to product code 500mm N.B.G12 Coloured lamps available in 70 and 150 watt 110mm A timed ignitor is now fitted as standard to all SON and HQI fittings 4 Lamps Lamps fitted fitted ® ® reslite reslite FLUORESCENT FLUORESCENT 2 70W 1 1 1 220 x 130 DFA35 35W HQI Recessed Fitting (adjustable) G12 Lamp DFA70 70W HQI Recessed Fitting (adjustable) G12 Lamp DFA150 150W HQI Recessed Fitting (adjustable) G12 Lamp FOR INDOOR USE ONLY 26 70W HQI Surface Fitting 150W HQI Surface Fitting Cutout (mm) DFR70 70W HQI Recessed Fitting (adjustable) DFR150 150W HQI Recessed Fitting (adjustable) Double sided amenity fitting IP40 Picture ref. 27 Prestronic Sensors Prestronic Sensors The Prestronic range of Microwave sensors can be fitted either integral or remote to any fluorescent luminaire to enable large savings in energy use and acheive reductions in Carbon ommissions. CDDME Microwave Sensors Microwave Sensors CDDME This is the simplest version of the Prestronic sensor range. It can be built into fittings or used as an individual sensor when mounted in the CDDMIP enclosure. It is able to provide the following functions: CDDMS This is the standard version of the Prestronic sensor range. It can be built into fittings or used as an individual sensor Indoors or Outdoors when mounted in the CDDMIP enclosure. It provides the following functions: 1 . Switch On/Off 2. Dimming when used in conjunction with Prestronic sensorDIM ballasts only. 3. Detection area. The detection area can be adjusted precisely using the DIP switches on the detector. 4. Hold Time. The time the fittings are held on at 100% can be adjusted using the DIP switches on the detector. 5. Daylight Sensing. This allows the sensor to be set to work in Daylight/Twilight/Darkness as required. This function is available only when mounted in CDDMIP enclosure. 1 . Switch On/Off 2. Dimming when used in conjunction with Prestronic sensorDIM ballasts only. 3. Detection area. The detection area can be adjusted precisely using the DIP switches on the detector. 4. Hold Time. The time the fittings are held on at 100% can be adjusted using the DIP switches on the detector. 5. Daylight Sensing. This allows the sensor to be set to work in Daylight/Twilight/Darkness as required.This function is available only when mounted in CDDMIP enclosure. 28 Technical Data Operating Voltage 220-240V +/- 10% 50/60Hz Operating Voltage 220-240V +/- 10% 50/60Hz Switching Capacity 800W (resistive load), 400W (inductive load), Unlimited load with Prestronic Ballast Switching Capacity 1000W (resistive load), 400W (inductive load), Unlimited load with Prestronic Ballast Standby Power <1W Standby Power 0.6W Detection Area 20/30/50/75/100% adjusted by DIP switches Detection Area 20/30/50/75/100% adjusted by DIP switches Hold Time 5s/30s/300s/20min/25min adjusted by DIP switches Hold Time 5s/30s/300s/15min/25min adjusted by DIP switches Daylight Threshold 2-500 lux daylight/twilight/darkness adjusted by DIP switches Daylight Threshold 2-500 lux daylight/twilight/darkness adjusted by DIP switches Sensor Principle Microwave Motion Detector Sensor Principle Microwave Motion Detector Microwave Frequency 5.8 GHz +/- 75 MHz Microwave Frequency 5.8 GHz +/- 75 MHz Microwave Power <1mw Microwave Power 1mw Detection Range Max 5 m Detection Range Max 10 m Detection Angle 30-150O Detection Angle 30-150O Motion Detection 1-20km/h Motion Detection 1-20km/h ( <3m mounting height ); 1-200km/h (>5m mounting height ) Mounting Height 3-5 m Mounting Height 3-10 m Operating Temperature 0OC to +50OC Operating Temperature -35OC to +70OC IP Rating IP20 (mounted inside a fitting), IP54 (mounted in CDDMIP enclosure) IP Rating IP20 (mounted inside a fitting), IP54 (mounted in CDDMIP enclosure) FLUORESCENT FLUORESCENT Technical Data CDDMS 29 Prestronic Sensors Prestronic Sensors Microwave Sensors CDDMR This is the reinforced version of the Prestronic sensor range.It has all the functions of the standard sensor and can be built into fittings or used as an individual sensor Indoors or Outdoors when mounted in the CDDMIP enclosure. By inceasing the power of the microwave it can detect up to 20m. It provides the same functions as the standard version: CDDMR 1 . Switch On/Off 2. Dimming when used in conjunction with Prestronic sensorDIM ballasts only. 3. Detection area. The detection area can be adjusted precisely using the DIP switches on the detector. 4. Hold Time. The time the fittings are held on at 100% can be adjusted as for detection using the DIP switches on the detector. 5. Daylight Sensing. This allows the sensor to be set to work in Daylight/Twilight/Darkness as required.This function is available only when mounted in CDDMIP enclosure. When using microwave sensors it is important to remember that the sensitivity is closely related to speed and reflective surface area. In normal cases, the minimum reflection surface is equal to the human trunk, all Prestronic products are based on this minimum reflective surface. However, when the CDDMR is mounted at or near 20m, the reflection surface is then only the human head and shoulder, which is a much smaller area than the trunk. In such cases, compensation in moving speed is needed to keep the same detection area; if there is no speed compensation, then the detection area is reduced by about half. To the side and below are the combined diagrams for the reinforced version (CDDMR), showing different mounting heights and detection areas for the different applications (the grey part for normal body detection, the yellow part for big-size or fast-moving objects detection) 30 Operating Voltage 220-240V +/- 10% 50/60Hz Switching Capacity 1000W (resistive load), 400W (inductive load), Unlimited load with Prestronic Ballast Standby Power 0.6W Detection Area 20/30/50/75/100% adjusted by DIP switches Hold Time 5s/30s/300s/15min/25min adjusted by DIP switches Daylight Threshold 2-500 lux daylight/twilight/darkness adjusted by DIP switches Sensor Principle Microwave Motion Detector Microwave Frequency 5.8 GHz +/- 75 MHz Microwave Power 2mw Detection Range Max 20 m Detection Angle 30-150O Motion Detection 1-20km/h ( <3m mounting height ); 1-200km/h (>5m mounting height ) Mounting Height 3-10 m Operating Temperature -35OC to +70OC IP Rating IP20 (mounted inside a fitting), IP54 (mounted in CDDMIP enclosure) FLUORESCENT FLUORESCENT Technical Data 31 Prestronic Sensors CDDMC Prestronic Sensors Microwave Sensors Microwave Sensors CDDMC This is a motion detector with a long sensing range and is suitable in its application for traffic areas with temporary occupation, such as corridors, pathways and general circulation areas. It provides the following functions: CDDMA This is a presence detector for use in areas such as offices, call centers and classrooms, where there is occupation of the room or area but only small or resticted movements It provides the following functions: 1 . Switch On/Off 2. Dimming a) When used in conjunction with Prestronic sensorDIM ballasts b) Provides 1-10 volt output for use with any analogue dimmable ballast 3. Corridor Function; Movement detected 100% output, No movement detected light level dimmed after preset time, after second preset time fitting switched off. 4. Detection area. The detection area can be adjusted precisely using the DIP switches on the detector. 5. Hold Time. The time the fittings are held on at 100% can be adjusted using the DIP switches on the detector. 6. Daylight Sensing. This allows the sensor to be set to work in Daylight/Twilight/Darkness as required using remote sensors mounted within the fitting. See page 34 for sensor heads. 1 . Switch On/Off 2. Dimming a) When used in conjunction with Prestronic sensorDIM ballasts b) Provides 1-10 volt output for use with any analogue dimmable ballast 3. Stand-by Function; Movement detected 100% output, No movement detected light level dimmed after preset time, after second preset time fitting switched off. 4. Detection area. The detection area can be adjusted precisely using the DIP switches on the detector. 5. Hold Time. The time the fittings are held on at 100% can be adjusted using the DIP switches on the detector. 6. Daylight Sensing. This allows the sensor to be set to work in Daylight/Twilight/Darkness as required using remote sensors mounted within the fitting. See page 34 for sensor heads. 32 Technical Data Operating Voltage 220-240V +/- 10% 50/60Hz Operating Voltage 220-240V +/- 10% 50/60Hz Switching Capacity 2500W (resistive load), 800W (inductive load), Unlimited load with Prestronic Ballast Switching Capacity 2500W (resistive load), 800W (inductive load), Unlimited load with Prestronic Ballast Standby Power <1W Standby Power <1W Detection Area 20/30/50/75/100% adjusted by DIP switches Detection Area 20/30/50/75/100% adjusted by DIP switches Hold Time 5s/30s/300s/15min/25min adjusted by DIP switches Hold Time 5s/30s/300s/15min/25min adjusted by DIP switches Daylight Threshold 2-500 lux daylight/twilight/darkness adjusted by DIP switches Daylight Threshold 2-500 lux daylight/twilight/darkness adjusted by DIP switches Sensor Principle Microwave Motion Detector Sensor Principle Microwave Motion Detector Microwave Frequency 5.8 GHz +/- 75 MHz Microwave Frequency 5.8 GHz +/- 75 MHz Microwave Power <1mw Microwave Power <1mw Detection Range Max 10 m Detection Range Max 6 m Detection Angle 30-150O Detection Angle 30-150O Motion Detection 1-20km/h ( <3m mounting height ); 1-200km/h (>5m mounting height ) Motion Detection Very small movements such as typing, reading and conversation Mounting Height 3-5 m Mounting Height 3-5 m Operating Temperature -35OC to +70OC Operating Temperature -35OC to +70OC IP Rating IP20 (mounted inside a fitting), IP54 (mounted in CDDMIP enclosure) IP Rating IP20 (mounted inside a fitting), IP54 (mounted in CDDMIP enclosure) FLUORESCENT FLUORESCENT Technical Data CDDMA 33 Prestronic Sensors Prestronic Sensors Lux Controller Control Options CDDPCH The Lux controller can be used to control individual or groups of fittings to a maximum of 400 watts inductive. The controller provides two contol outputs, the first, via the 1-10 volt output dims the fittings to the required level to provide lighting to the selected lux level. The second output switches the fittings off, once the lux value is exceeded by natural daylight. CDDME Technical Data 1 2 : OFF Daylight Sensor Hold Time 3 1 2 1 3 2 3 I 100% I 5s I 2 Lux II 75% II 30s II 10 Lux III 50% III 300s III 30 Lux IV 30% IV 20min IV 50 Lux V 20% V 25min V Disabled Darkness Twilight Daylight Operating Voltage 110-277V 50/60Hz Switching Capacity 400W inductive load Standby Power <0.6W Output Signal 1-10V Lux Values 50/100/200/300/500/700 adjusted by DIP switches Operating Temperature -35OC to +70OC IP Rating IP20 CDDMS/CDDMR Dip switch Settings. Detection Area 1 2 : ON : OFF Daylight Sensor Hold Time 3 1 2 1 3 2 3 I 100% I 5s I 2 Lux II 75% II 30s II 10 Lux Sensor Options III 50% III 300s III 30 Lux IV 30% IV 15min IV 50 Lux he basic sensor can be mounted in three ways using T the attachments illustrated. 1. Surface mounting. The sensor is attached to the bracket and mounted onto a flat surface. 2.Recessed mounting. Using a plastic nut the sensor can be recessed into a suitable flat surface 3. The sensor can be mounted directly onto a T5 or T8 tube using the plastic finger attached to the back of the bracket. The cable length is 1 meter. V 20% V 25min V Disabled CDDPCH CDDHIP IP54 Housing Dip switch Settings. 2 CDDMC/CDDMA Dip switch Settings. Detection Area 1 2 : ON : OFF 4 : ON Daylight : OFF Stand-by Dimming Level Hold Time 3 I 1 100% 2 1 3 I I 10% 20% II 75% II 30s III 50% III 300s III 30% IV 30% IV 15min IV 40% V 20% V 25min Daylight Sensor Stand-by Period 2 3 1 2 3 I 5 min I 2 Lux II 10 min II 10 Lux 50 Lux III 20 min III 30 Lux II 100 Lux IV 40 min IV 50 Lux III 200 Lux V 1h 300 Lux V 500 Lux VI 750 Lux 3 5s I IV 2 II 1 3 Twilight Control Options Lux Settings 1 Darkness V 100 Lux VI 200 Lux Darkness Twilight Daylight FLUORESCENT FLUORESCENT Detection Area : ON Control Options Control Options 34 Dip switch Settings. 35 FLOODLIGHTING 36 FLOODLIGHTING Page 38/39/40 Page 41 Page 42 Page 50 Page 51 Page 52 Page 43 Page 44 Page 45 Page 53 Page 54 Page 55 Page 46 Page 47 Page 47 Page 55 Page 56 Page 57 See Pages 48 and 49 for Columns and Street Lighting Cutouts 37 IP65 Superior Range IP65 Superior Polycarbonate Range Product Code Weight (Kg) Windage (m2) DFPS150 DFPS250 DFPS400 150W SON-T 250W SON-T 400W SON-T 11.2 12.6 14.2 0.19 0.19 0.19 DFPM250 DFPM400 250W HQI 400W HQI 11.2 11.7 0.19 0.19 DFPF250 250W MBF 11.2 0.19 Product Code DFGS150 DFGS250 DFGM150 DFGM250 DFGF250 FLOODLIGHTING A timed ignitor is now fitted as standard to all SON and HQI fittings Lamps 150mm DFPGR WCDF2 PC WH RGB DFPG DCC01 DCC02 DCCF6 Wire Guard Wire Cage 550 x 550 x 550mm Photocell version White Body Remote Gearbox Spare Glass Double Pole Cut out Single Fuse Double Pole Cut out Double Fuse 6 amp Fuse for Cut out 438mm 11mm Ø 7.5 8.5 7.5 7.5 7.5 0.19 0.19 0.19 0.19 0.19 150W SON-T 250W SON-T 150W HQI-T 250W HQI-T 250W MBFU Wire Guard Wire Cage 550 x 550 x 550mm Photocell version White Body Remote Gearbox Spare Glass Double Pole Cut out Single Fuse Double Pole Cut out Double Fuse 6 amp Fuse for Cut out 438mm 148mm 424mm 11mm Ø 150mm 11 x 25 (2x) 11 x 25 (2x) 148mm 424mm 428mm 428mm fitted Constructed from a Polycarbonate body, with a one piece toughened glass front cover attached to the body by stainless steel clips. Supplied with galvanised bracket and lamp and 230-240V 50Hz control gear A timed ignitor is now fitted as standard to all SON and HQI fittings Lamps fitted ® reslite ® reslite FLOODLIGHTING 38 Constructed from a diecast aluminium body, with a one piece toughened glass front cover attached to the body by stainless steel clips. Supplied with galvanised bracket and lamp and 230-240V 50Hz control gear Windage (m2) Options add suffix to product code Options add suffix to product code DFPGR WCDF2 PC WH RGB DFPG DCC01 DCC02 DCCF6 Weight (Kg) 39 IP65 Mini Superior Range IP65 Superior Asymetrical Floodlight Mini Superior Range Windage (m2) DFPS70i DFPS70T 70W SONi 70W SON-T 0.13 0.13 DFPM70 DFPM150 70W HQI 150W HQI 0.13 0.13 DFPF80 DFPF125 80W MBF 125W MBF 0.13 0.13 Product Code Weight (Kg) Windage (m2) DFPAS150 150W SON-T DFPAS250 250W SON-T DFPAS400 400W SON-T 11.2 12.6 14.2 0.19 0.19 0.19 DFPAM150 150W HQI-T DFPAM250 250W HQI-T DFPAM400 400W HQI-T 11.2 11.7 12.7 0.19 0.19 0.19 Options add suffix to product code A smaller version of the flood shown on page 38. Constructed from a diecast aluminium body, with a one piece toughened glass front cover attached to the body by stainless steel clips. Supplied with galvanised bracket and lamp and 230-240V 50Hz control gear 40 13mm Ø Lamps fitted 85mm DFPGR WCDF2 PC WH RGB DFPG DCC01 DCC02 DCCF6 Wire Guard Wire Cage 550 x 550 x 550mm Photocell version White Body Remote Gearbox Spare Glass Double Pole Cut out Single Fuse Double Pole Cut out Double Fuse 6 amp Fuse for Cut out 438mm 125mm 338mm 148mm 424mm 11mm Ø 150mm 428mm 360mm 11 x 25 (2x) 11 x 45 (2x) Constructed from a diecast aluminium body, with a one piece toughened glass front cover attached to the body by stainless steel clips. Supplied with galvanised bracket and lamp and 230-240V 50Hz control gear A timed ignitor is now fitted as standard to all SON and HQI fittings Lamps fitted ® reslite ® reslite FLOODLIGHTING FLOODLIGHTING 358mm A timed ignitor is now fitted as standard to all SON and HQI fittings Options add suffix to product code PCPhotocell 110 110 volt (HQI and SON) FDPGR/S Wire Guard WCDF1 Wire Cage DCC01 Double Pole Cut out Single Fuse DCC02 Double Pole Cut out Double Fuse DCCF6 6 amp Fuse for Cut out 41 IP54 Value Range Asymetrical IP65 Superior Slimline Range Asymetrical A slim version of the Superior flood range shown on pages 38, 39 and 41. Constructed from a diecast aluminium body, with a one piece toughened glass front cover attached to the body by stainless steel clips. Supplied with galvanised bracket and lamp and 230-240V 50Hz control gear Weight (Kg) Windage (m2) DFAM70G DFAM150G DFAS70G DFAS150G 70W HQI R7s 150W HQI R7s 70W SON-TD R7s 150W SON-TD R7s 5.0 6.0 5.0 6.0 0.08 0.08 0.08 0.08 DFAM250 DFAM400 250W HQI E40 400W HQI E40 9.5 10.5 0.24 0.24 Product Code 9.1 10.1 0.17 0.17 Options add suffix to product code DFCGR Wire Guard WCDF2 Wire Cage 550 x 550 x 550mm DCC01 Double Pole Cut out Single Fuse DCC02 Double Pole Cut out Double Fuse DCCF6 6 amp Fuse for Cut out B Black Body WH White Body (70 and 150 watt only) PCPhotocell DFAGR Wire Guard WCDF1 Wire Cage 360 x 360 x 360mm Coloured lamps (70W/150W/250W/400W) BlBlue GrGreen MgMagenta Constructed from a diecast aluminium body, with a hinged front cover fitted with toughened glass. Supplied with painted bracket and lamp and 230-240V 50Hz control gear. 70/150 watt 85mm 410mm 145mm Ø10.5mm Beam Patterns Asymetrical flood 345mm 440mm 11mm Ø 51mm 300mm 510mm 51mm 200mm 75mm Area flood 420mm A timed ignitor is now fitted as standard to all SON and HQI fittings 250/400 watt 345mm Ø13mm A timed ignitor is now fitted as standard to all SON and HQI fittings 115mm 605mm Lamps fitted 660mm 51mm Ø21mm Ø11mm Lamps fitted ® reslite ® reslite FLOODLIGHTING FLOODLIGHTING Windage (m2) DFVM250 250W HQI-T DFVM400 400W HQI-T Options add suffix to product code 235mm 42 Weight (Kg) 43 IP65 Contractor Range IP65 Contractor Range Product Code Weight (Kg) Windage (m2) DFS150 DFS250 DFS400 150W SON-T 250W SON-T 400W SON-T 9.5 10.5 11.5 0.13 0.13 0.13 DFM150 DFM250 DFM400 150W HQI-T 250W HQI-T 400W HQI-T 9.5 10.5 11.5 0.13 0.13 0.13 DFF250 DFF400 250W MBF 400W MBF 10.5 11.5 0.13 0.13 DFS150PD DFS250PD DFS400PD 150W SON 250W SON 400W SON Polycarbonate Lens Polycarbonate Lens Polycarbonate Lens DFM250PD DFM400PD 250W HQI 400W HQI Polycarbonate Lens Polycarbonate Lens DFF250PD DFF400PD 250W MBF 400W MBF Polycarbonate Lens Polycarbonate Lens Product Code Weight (Kg) Windage (m2) DFS1000 DFM1000 1KW SON 1KW HQI 11.8* 11.7* 0.23 0.23 DFM2000/240 DFM2000/415 2KW HQI 2KW HQI 16.0* 16.0* 0.23 0.23 DFS1000P/240 DFM1000P/240 DFM2000P/240 DFM2000/P415 1KW SON 1KW HQI 2KW HQI 2KW HQI 12.4* 12.4* 16.0* 16.0* 0.33 0.33 0.33 0.33 * Head only 1 Kw IP65 Gear Box 2 Kw IP65 Gear Box DFS1000 14.1 24.3 Options add suffix to product code 44 400mm 14mm Ø 300mm A timed ignitor is now fitted as standard to all SON and HQI fittings 300mm 490mm DFM2000P 150mm DFM2000 A timed ignitor is now fitted as standard to all SON and HQI fittings 260mm Lamps Lamps fitted fitted ® reslite ® reslite FLOODLIGHTING FLOODLIGHTING Constructed from a diecast aluminium body, with a hinged front cover fitted with toughened glass. Supplied with painted bracket and lamp and 230-240V 50Hz control gear. DFGR Wire Guard WCDF2 Wire Cage 550 x 550 x 550mm PCPhotocell RGB Remote Gearbox DCC01 Double Pole Cut out Single Fuse DCC02 Double Pole Cut out Double Fuse DCCF6 6 amp Fuse for Cut out 45 Small IP65 Projector Range Small Polycarbonate Flood Range Standard Polycarbonate Range Product Code DFS70i PD 70W SONi DFS70T PD 70W SON-T DFN35 DFN70 DFN150 DFF80PD 80W MBF 35W HQI 70W HQI 150WHQI Weight (Kg) G12 G12 G12 4.1 4.1 4.6 The DFQ55PD uses Philips QL induction lamp technology DFQ55PD 55W QL giving 60,000 hours lamp life. Options add suffix to product code DFN 188mm Ø 50mm 210mm PCPhotocell WH White Body WCDF1 Wire Cage 360mm DFNO 10.5mm Ø DFNO70 DFNO150 A small economically priced flood constructed from a polycarbonate body, with a clear polycarbonate front cover. Supplied with galvanised bracket and lamp and 230-240V 50Hz control gear 70W HQI 150WHQI Ø 2 x 8.5mm 80mm G12 G12 5.3 5.8 324mm 257mm 224mm 276mm Ø 106mm 216mm Ø 118mm 46 293mm 10mm A timed ignitor is now fitted as standard to all SON and HQI fittings except those fitted with SON-I lamps Ø 85mm 11 x 25 (2x) A timed ignitor is now fitted as standard to all SON and HQI fittings Lamps Lamps fitted fitted ® reslite ® reslite FLOODLIGHTING FLOODLIGHTING 200mm A range of small projector floods for both external and internal use. Constructed from a cast aluminium body, with a hardened glass lens. Supplied with bracket and lamp and 230-240V 50Hz control gear 47 Columns and Cut outs Columns and Cut outs Typical Flange Details Street Lighting Cut outs are available from stock suitable for use with the columns, they accept fuse links to BS88 Part 1, AC16 Tag Type up to 25 amp. Maximum cable of 16mm2 stranded copper or 25mm2 solid aluminium Product Code DCC01Double Pole Cut out Single Fuse DCC02Double Pole Cut out Double Fuse DCCF6 6 amp Fuse for Cut out 48 Column Column Planting Overall Base Height H Part No Depth P Length L 4M SC4RL 800 4800 1075 5M SC5RL 800 5800 1075 5M SC5RH 800 5800 6M SC6RL 1000 7000 6M SC6RH 1000 7000 1075 8M SC8RL 1200 9200 1250 Door to Height A Ground B Aperture Aperture Base Shaft Diameter Diameter “A” Square “B” Bolt Height M Dimention Sq CRS 5&6M 280 200 8, 10 & 6 M 400 400 15 M 500 500 Saturn Lighting offer a range of columns from 4M to 15M. All columns meet the requirements of EN40 and are hot dip galvanised to BSEN1461. Root mounted and Flange mounted are offered as standard, however Mid-hinged and Base-hinged columns are available by request. Saturn offer a range of brackets and spigots from stock. (See page 50 for Details). Mass Spigot Column Column Kgs Detail Height H Part No Base Door to Height A Ground B Aperture Aperture Depth C Width C Base Shaft Diameter Diameter Mass Spigot Kgs Detail Depth C Width C 425 500 100 140 76 42 N/A 4M SC4FL 1075 425 500 100 140 76 42 N/A 425 500 100 140 76 47 76 x 200 5M SC5FL 1075 425 500 100 140 76 47 76 x 200 1075 425 500 100 168 89 57 N/A 5M SC5FH 1075 425 500 100 168 89 57 N/A 1075 425 500 100 140 76 50 N/A 6M SC6FL 1075 425 500 100 140 76 50 N/A 425 500 100 168 89 60 76 x 200 6M SC6FH 1075 425 500 100 168 89 60 76 x 200 500 600 115 168 89 84 76 x 200 8M SC8FL 1250 500 600 115 168 89 84 76 x 200 8M SC8RH 1200 9200 1250 500 600 115 168 114 96 101 x 250 8M SC8FH 1250 500 600 115 168 114 96 101 x 250 10M SC10RL 1500 11500 1250 500 600 115 168 114 142 101 x 250 10M SC10FL 1250 500 600 115 168 114 142 101 x 250 10M SC10RH 1500 11500 1250 500 600 115 194 148 170 127 x 300 10M SC10FH 1250 500 600 115 194 148 170 127 x 300 12M SC12RL 1700 13700 1250 500 600 115 194 148 215 127 x 300 12M SC12FL 1250 500 600 115 194 148 215 127 x 300 12M SC12RH 1700 13700 1250 500 600 115 219 168 253 152 x 300 12M SC12FH 1250 500 600 115 219 168 253 152 x 300 15M SC15RL 2000 17000 2500 1200 600 115 219 168 422 152 x 300 15M SC15FL 2500 1200 600 115 219 168 422 152 x 300 15M SC15RH 2000 17000 2500 1200 600 115 219 194 466 177 x 300 15M SC15FH 2500 1200 600 115 219 194 466 177 x 300 FLOODLIGHTING FLOODLIGHTING ROOT MOUNTED COLUMNS Column 49 Brackets Wire Cages and Guards BK1 BK2 BK8 Product Code Product Code Light duty BK1 Wall Bracket BK2 Corner Bracket BK3 Extension Arm (not illustrated) WCDF1 Black WCDF2 Black WCDA Black WCPL White WCZE White 70W discharge & T/Halogen 70W discharge & T/Halogen 70W discharge & T/Halogen Heavy duty BK4 77mm Post Top Spigot BK6 Wall Bracket c/w pole top spigot BK7 Corner Bracket c/w pole top spigot BK8 63mm Post Top Spigot BK10 Twin Arm Floodlight Bracket 76mm Spigot BK11 Twin Arm Floodlight Bracket 63mm Spigot BK12 Angled Wall Bracket for DAL fitting BKU64 64mm U Bolt BKU76 76mm U Bolt Wire Cage small floods 380mm x 380mm x 380mm Wire Cage large floods 550mm x 550mm x 550mm WCDF1 Wire Cage amenity fittings 380mm x 380mm x 230mm Wire Cage 2D bulkheads 330mm x 330mm x 125mm Wire Cage 8 watt bulkhead440mm x 200mm x 125mm BK6 WCDA DFPGR Wire Guard for large Superior floods DFPGR/SWire Guard for small Superior floods BK4 WCZE DFCGR Wire Guard for large Economy floods DFGR DFAGR Wire Guard for large Superior Slimline floods BK7 DFPGR BK12 BKU76 BK10 WCPL 50 ® reslite ® reslite FLOODLIGHTING FLOODLIGHTING Wire Guard for large Contractor floods 51 IP65 Amenity and Security Linear Halogen Product Code Product Code TH500 TH1000 TH1500 DA70S/C 70W SONi E27 DA70M/C 70W HQI E27 300W/500W Tungsten halogen floodlight 750/1000W Tungsten halogen floodlight 1500W Tungsten halogen floodlight DA80F/C 80W MBFU E27 DA125F/C 125W MBFU E27 All TH fittings suitable for 240V and 110V lamps (not included) DA26PL/C 26W PL-C DA42PL/C 42W PL-T TH500 135mm 185mm 280mm LDA21 21 watt LED WCDA Wire Cage Options add suffix to product code PCPhotocell EM 3Hr Maintained Emergency (26W and 42W only) TH1000 150mm 275mm 305mm A range of small Tungsten Halogen floods for external use. Constructed from a cast aluminium body, with a hardened glass lens. Supplied with bracket. WCDA Constructed from polycarbonate body, with a clear polycarbonate lens. There are multiple entry points to allow easy cable entry. Supplied with lamp and 230-240V 50Hz control gear A timed ignitor is now fitted as standard to all SON and HQI fittings except those fitted with SON-I lamps Lamps Lamps not fitted fitted ® reslite ® reslite FLOODLIGHTING 410mm FLOODLIGHTING 270mm 215mm 340mm 190mm 270mm TH15000 52 380mm x 380mm x 230mm 53 Amenity and Security Amenity and Security Product Code Constructed from a diecast aluminium body with a toughened glass front cover. Supplied with galvanised bracket and lamp and 230-240V 50Hz control gear Diagram ref. DA150S DA250S DA400S 150W SON-T E40 250W SON-T E40 400W SON-T E40 1 1 2 DA150M DA250M DA400M 150W HQI E40 250W HQI E40 400W HQI E40 1 1 2 WCDA Wire Cage All round amenity fitting DAR70S DAR150S 70W SON E27 150W SON E40 DAR70M 70W HQI E27 DAR150M 150W HQI E27 DAR80F DAR125F 380mm x 380mm x 230mm 80W MBFU E27 125W MBFU E27 Options add suffix to product code Options add suffix to product code PCPhotocell PC Integral photocell 307mm 1 365mm 240mm 190mm 307mm 235mm WCDA Constructed from a diecast aluminium body, with a polycarbonate diffuser attached to the body by screw fixings. Supplied with lamp and 230-240V 50Hz control gear. Sealed to IP54. Up/Down External Amenity fitting 235mm 60 mm 120 mm 370 mm 170 mm A timed ignitor is now fitted as standard to all SON and HQI fittings 55 mm 175 mm 115 mm A timed ignitor is now fitted as standard to all SON and HQI fittings 310 mm Top View Side View Lamps Lamps fitted fitted ® reslite ® reslite FLOODLIGHTING 54 460mm DAU150M 150W HQI R7s LDAU21 21W LED 240mm FLOODLIGHTING 2 55 Amenity and Security IP54 Bollards Bollards Walkover Fittings WOL70S WOL70M WOL150S WOL150M LDWO21 70W SON R7s 70W HQI R7s 150W SON R7s 150W HQI R7s 21W LED Symmetric Symmetric Symmetric Symmetric Symmetric IP65 IP65 IP65 IP65 IP65 WOAL70S WOAL70M WOAL150S WOAL150M 70W SON R7s 70W HQI R7s 150W SON R7s 150W HQI R7s Asymmetric Asymmetric Asymmetric Asymmetric IP65 IP65 IP65 IP65 BD1100HD BD1100HD/S BD1100HD/M BD1100HD/F BD1100HD/18 BD1100HD/26 BDROOT The HD type bollard is constructed from an extruded aluminium body, with a clear polycarbonate diffuser and aluminium louvre. This bollard can be surface mounted or root mounted using the optional root mounting kit. Supplied with lamp and 230-240V 50Hz control gear. E27 L/holder 70W SON E27 70W HQI E27 80W MBFU E27 18W PL-C 26W PL-C The FT type bollard is constructed from an extruded aluminium body, with a clear polycarbonate diffuser and aluminium louvre. This bollard is for surface mounting only. Supplied with lamp and 230-240V 50Hz control gear. A timed ignitor is now fitted as standard to all SON and HQI fittings 1.1M High 1.1M High 1.1M High 1.1M High 1.1M High 1.1M High A timed ignitor is now fitted as standard to all SON and HQI fittings Lamps Lamps fitted fitted ® reslite ® reslite FLOODLIGHTING FLOODLIGHTING BD1100FT BD1100FT/S BD1100FT/M BD1100FT/F BD1100FT/18 BD1100FT/26 56 E27 L/holder 1.1M High 70W SON E27 1.1M High 70W HQI E27 1.1M High 80W MBFU E27 1.1M High 18W PL-C 1.1M High 26W PL-C 1.1M High Root Mounting for above 57 INDUSTRIAL Page 60 INDUSTRIAL Page 61 Page 66 58 Page 62 Page 63 Page 64 Page 65 Page 67 Page 67 Page 68 Page 69 59 Horticultural Fittings IP44 Starbay Product Code Product Code LB150S LB250S LB400S 150W SON-T 250W SON-T 400W SON-T LBG400S 400W SON LBG600S 600W SON LBG1000S 1000W SON LB150M LB250M LB400M 150W HQI-T 250W HQI-T 400W HQI-T LBG250M 250W HQI LBG400M 400W HQI LB250F LB400F 250W MBFU 400W MBFU SON-T Plus Lamp Extralux Agricultural Lamp Plantmax High Output Agricultural Lamp (See page 91 for details) IP65 Gear Box Options Options add suffix to product code LPD R AUX LWG FTB LSG LSK LLB Dished Polycarbonate lens High Racking version Auxilliary Lamp - 150W T/Halogen Wire Guard Fused Terminal Block Glass Cover (standard on HQI) Low Bay spine Kit Low Bay Louvre/Baffle Flo-bay® Propagation Fitting LLB 520mm Fixings 593mm 60 A timed ignitor is now fitted as standard to all SON and HQI fittings 282mm Length Width Height Weight LFW255* LFW355* LFW455* LFW655* LFW855* (mm) 2 x 55W PLL 3 x 55W PLL 4x 55W PLL 6 x55W PLL 8 x 55W PLL (mm) 595 595 595 1170 1170 LFPD LFPRD LFSPW Clear polycarbonate diffuser Prismatic diffuser Split wired circuits (mm) 330 330 330 330 330 (kg) 118 118 118 118 118 4.0 4.0 4.5 8.5 9.0 158mm *Supplied as standard with 2.5 meters of cable and 13 amp plug fitted. Ideal for use in Hydroponic Installations for the propagation of cuttings and seedlings and cultivation of crops needing lower heat outputs from the lighting source. Lamps fitted ® reslite ® reslite A timed ignitor is now fitted as standard to all SON and HQI fittings Lamps fitted INDUSTRIAL INDUSTRIAL LWG Supplied as standard with SON-T lamp and IP44 Gear Box 61 IP65 Low Bays Flo-bay® Product Code Weight (Kg) LBW250S LBW400S 250W SON IP65 400W SON IP65 12.3 13.5 LBW250M LBW400M 250W HQI IP65 400W HQI IP65 11.4 12.6 LBW250F LBW400F 250W MBF IP65 400W MBF IP65 11.4 12.6 Options The one piece toughened glass AUX cover is held in place by four screws, which compress the rubber gasket to seal the fitting to IP65. Auxilliary Lamp - 150W T/Halogen 325 625 62 A timed ignitor is now fitted as standard to all SON and HQI fittings Length Width Height Weight LF355 LF455 LF655 LF855 (mm) 3 x 55W PLL 4 x 55W PLL 6 x 55W PLL 8 x 55W PLL (mm) 595 595 1170 1170 (mm) 330 330 330 330 (kg) 118 118 118 118 4.0 4.5 8.5 9.0 LF355EM LF455EM LF655EM LF855EM LFPD LFPRD LFWG LFWGL LFSPW DIM DIG ST 3 x 55W PLL 4 x 55W PLL 6 x 55W PLL 8 x 55W PLL` 595 595 1170 1170 330 330 330 330 118 118 118 118 5.0 5.5 9.5 10.0 Clear polycarbonate diffuser Prismatic diffuser Wire Guard for 2,3 and 4 tube versions Wire Guard for 6 and 8 tube versions Split wired circuits 0 - 10v Dimmable Digitally Dimmable Self Test for Emergency Fittings 170 12mm x 28mm +/- 60 ° N.B. The 4 x 55W Flo-bay has the equivalent lumen output of a 250W HQI Lowbay but only uses 220 circuit watts of energy. 150mm The Flo-bay is an energy efficient fitting which may be controlled by a PIR sensor, thus allowing areas of low usage to reduce the lighting to minimum levels until needed. Lamps Lamps fitted fitted ® reslite ® reslite INDUSTRIAL INDUSTRIAL The rear of the IP65 Lowbay showing the adjustable galvanised brackets used to secure the fitting to its mounting point. The brackets can be ajusted 60 O either side of vertical 63 Powerlux 64 Length Width Height LFN428 LFN454 LFN435 LFN449 LFN480 LFN628 LFN654 (mm) 4 x 28W T5 4 x 54W T5 4 x 35W T5 4 x 49W T5 4 x 80W T5 6 x 28W T5 6 x 54W T5 (mm) 1225 1225 1525 1525 1525 1225 1225 (mm) 295 295 295 295 295 430 430 125 125 125 125 125 125 125 Options add suffix to product code LFNDIFF654 LFNDIFF454 LFNDIFF435 LFNWG654 LFNWG454 LFNWG435 LFSPW DIM DIG ST Clear polycarbonate diffuser for 6 tube 1225mm fitting Clear polycarbonate diffuser for 4 tube 1225mm fitting Clear polycarbonate diffuser for 4 tube 1525mm fitting Wire Guard for 6 tube 1225mm fitting Wire Guard for 4 tube 1225mm fitting Wire Guard for 4 tube 1525mm fitting Split wired circuits 0 - 10v Dimmable Digitally Dimmable Self Test for Emergency Fittings Length Width Height LFN428E LFN454E LFN435E LFN449E LFN480E LFN628E LFN654E (mm) 4 x 28W T5 4 x 54W T5 4 x 35W T5 4 x 49W T5 4 x 80W T5 6 x 28W T5 6 x 54W T5 (mm) 1195 1195 1495 1495 1495 1195 1195 (mm) 295 295 295 295 295 435 435 100 100 100 100 100 100 100 The Economy Powerlux keeps the energy efficiency of the Powerlux fitting using the design of reflectors. However, in order to keep the costs of this fitting to a minimum it can not be fitted with all the options of the Powerlux. No Options available for the Economy Version Lamps Lamps fitted fitted ® reslite ® reslite INDUSTRIAL INDUSTRIAL The Powerlux is a highly energy efficient fitting with a Light Output Ratio of over 92%. The body is manufacured from folded and welded sheet steel, powder coated white. The reflectors are made from Miro 4 aluminium. It is an ideal replacement for Highbays and Lowbays in Warehousing, Retail Units, Sports Halls and Factories. Additional enegy savings can be achieved by incorporation of movement sensors and lux level controls into this fitting. Economy Powerlux 65 High Bays IP44 Decorative High Bays Product Code Product Code HB150S HB250S HB400S 150W SON-E 250W SON-E 400W SON-E HB250M HB400M 250W HQI-E 400W HQI-E HB250F HB400F 250W MBF 400W MBF Options add suffix to product code HSG HPD HWG AUX HBRB250S HBRB400S 250W SON-E 400W SON-E HBRB250M HBRB400M 250W HQI-E 400W HQI-E HBRB250F HBRB400F 250W MBF 400W MBF HBRB200F 200W PL HBRB35M HBRB70M HBRB150M HBRB26 HBRB32 HBRB42 HWG 240mm INDUSTRIAL 300mm 35W HQI G12 70W HQI G12 150WHQI G12 26WPL-C 32WPL-T 42WPL-T The gear box is constructed from white painted cast aluminium. The refractor is made from moulded acrylic. 1M Suspension Kit and Flex fitted. Supplied with lamp and 230-240V 50Hz control gear Ø 480mm The gear box is constructed from white painted pressed steel. The refractor is made from moulded acrylic. Supplied with lamp and 230-240V 50Hz control gear A timed ignitor is now fitted as standard to all SON and HQI fittings Lamps Lamps fitted fitted ® reslite ® reslite INDUSTRIAL 66 280mm 410mm 195mm A timed ignitor is now fitted as standard to all SON and HQI fittings 240mm 25mm Safety Glass Dished Polycarbonate Diffuser/Lens Wire Guard Auxilliary Lamp - 150W T/Halogen Product Code The gear box is constructed from white painted pressed steel. The reflector is spun aluminium. Supplied with lamp and 230-240V 50Hz control gear 195mm 67 Superior Decorative High Bays IP65 High Bays Product Code Product Code HBG70M HBG150M 70W HQI-EE27 150W HQI-E HBG42F 42W PL-C E27 Options add suffix to product code AUX Auxilliary Lamp - 150W T/Halogen Supplied as standard with a White diffuser, however it is available in Red, Blue and Yellow. HBW250S HBW400S 250W SON 400W SON HBW250M HBW400M 250W HQI 400W HQI HBW250F HBW400F 250W MBF 400W MBF Options add suffix to product code HPD AUX Polycarbonate Diffuser Auxilliary Lamp - 150W T/Halogen 270mm 270mm 68 290mm Ø 500mm A timed ignitor is now fitted as standard to all SON and HQI fittings A timed ignitor is now fitted as standard to all SON and HQI fittings Note Lamps fitted ® reslite Polycarbonate lenses discolour when used in conjunction with Metal Halide (HQI) lamps. The UV emissions which cause the discoloration are partially screened by the toughened glass internal lense (250/400W only) providing longer lens life. Discoloration of the polycarbonate lens does not constitute a fault. Replacement polycarbonate lenses are available. Order code HPD. ® reslite Lamps fitted INDUSTRIAL INDUSTRIAL The gear box is constructed from cast aluminium. The glass diffuser can be supplied in various colours with the drop glass base. It comes complete with ceiling mounting plate, wire suspentions and cable. Supplied with lamp and 230-240V 50Hz control gear 69 EMERGENCY LIGHTING & FIRE ALARMS Page 71, 78 Page 72, 78 Page 73 Bulkhead Product Code Length Width Height ZE1008NM 8W 3 hour 345 (Non-maintained) ZE1018M 8W 3 hour 345 (Maintained) ZE2L Adhesive legend kit 108 80 108 80 An attractively designed IP65 emergency bulkhead manufactured in polycarbonate and ABS. This fitting features a hinged geat tray. Options add suffix to product code ST Page 74 Page 75 Page 75 Self Test Product Code Length Width Height ZE108NM/110 8W 3 hour 365 (Non-maintained) ZE118M/110 8W 3 hour 365 (Maintained) ZE2L Adhesive legend kit Options add suffix to product code ST Page 76 Page 77 Self Test Page 77 130 80 130 80 A110v emergency bulkhead manufactured in polycarbonate and ABS. This fitting features a hinged geat tray and clip-on cover for ease of installation and maintenance. Slave Product Code ZE28 IP65 Bulkhead ZE38 Exit Box ZE54Crystal ZE88Recessed Page 79 Page 79 Page 80 Options add suffix to product code 24 volt 50 volt 110 volt A range of slave luminaires available in 24V, 50V and 110V. For use with central battery systems. Lamps 70 fitted Page 81/82 Page 86 Page 87/88 ™ rescape EMERGENCY 24 50 110 71 Exit Signs A superbly designed low profile exit sign manufactured in polycarbonate. Designed for ease of installation. Exit Signs Product Code ZEP308NM ZEP318M ZEP328S 8W non-maintained 8W maintained 8W sustained Length Width Depth 380 280 280 185 185 185 Product Code Depth 72 72 72 ZE348NM 8W non-maintained ZE358M8W maintained ZE38J Slave Options add suffix to product code ST LengthWidth 350105175 350105175 250 105 175 Options add suffix to product code Self Test ST A Polycarbonate IP65 double sided ceiling mounted exit sign with a viewing distance of 32 metres. This tough exit sign is ideally suited for public walkways, enclosed car parks, etc. and is supplied with legend. Self Test Slave Option add suffix to product code for required voltage 24 50 110 72 Product Code ZE318M 8W maintained LengthWidth Depth 395 192 60 Options add suffix to product code B Brass CChrome ST Self Test Lamps Lamps fitted fitted ™ rescape ™ rescape EMERGENCY EMERGENCY A full specification range of emergency exit boxes. Manufactured in sheet steel complete with polycarbonate screened legend and polycarbonate downlight panel. Supplied as standard in a white paint finish, the extremely slim exit sign is also available in brass or chrome finish. 24V 50V 110V 73 2D Emergency Fittings Product Code Twin Spot Lamp Diameter (mm) Maintained 3 Hour Emergency PLE16HF/EM 16W 2D PLE28HF/EM 28W 2D 235 280 PLEOP316HF/EM PLEOP416HF/EM PLEOP428HF/EM PLEOP438HF/EM PLEOP528HF/EM PLEOP538HF/EM 325 425 425 425 525 525 16W 2D 16W 2D 28W 2D 38W 2D 28W 2D 38W 2D Product Code 380 x 330 x 55mm IP40 ZT220 ZT250 2 x 20W non-maintained 3 hour 2 x 50W non-maintained 1 hour Standard (Steel body) This comprehensive range of twinspot emergency luminaires offers some of the best value emergency lighting available. Supplied in a standard stove enamelled steel body, this range is one of the neatest available. Supplied with high power halogen lamps. Product Code Lamp Diameter (mm) Tri Spot 74 PLE28HF/EML 28W 2D 280 ZESM61S/16 ZESM61S/28 ZESM61S/38 16W 2D 28W 2D 38W 2D 235 280 280 ZESM65S/16 ZESM65S/28 ZESM65S/38 16W 2D 28W 2D 38W 2D 325 425 425 Product Code 380 x 360 x 110mm IP65 ZT320 3 x 20W non-maintained 3 hour A brand new projector emergency light. IP65 as standard, this luminaire is a unique new design. Allowing individual adjustment of the 3 projector heads and is one of the neatest emergency projectors available. Ideal for the food industry Close up of the interior to show the individual adjustment of the projector heads. Lamps Lamps fitted fitted ™ rescape ™ rescape EMERGENCY EMERGENCY LED Combined 3 Hour Emergency 75 LED Emergency Fittings Flush Emergency Product Code ZE818M Product Code 155 x 97 x 51mm ZES10NM ZES11M 8W maintained 3 hour Dimensions 393 x 165 x 10mm Void depth required = 80mm Non-maintained LED Maintained LED Cut out = 365 x 135mm The LED luminaire is the smallest emergency bulkhead currently available. This fitting is so unobtrusive it will not look out of place in any installation. Options add suffix to product code CChrome ST Self Test Features Lamp – 8W T5 Fluorescent (supplied) Battery – 2.4V 4AH Ni-CD Emergency duration – 3 hours Product Code 200 mm Dia x 95mm ZES50NM Non-maintained LED 76 A fully recessed emergency luminaire with a white or chrome frame and a prismatic diffuser. Ideal for use in suspended ceilings. EMERGENCY EMERGENCY The traditional crystal fitting brought up to date by the use of a high output LED lamp source. Lamps fitted ™ rescape ™ rescape 77 LED Emergency Fittings LED Emergency Fittings Product Code Length Width Depth ZES100 Maintained LED/ on Maintained LED N Battery Battery Temp Recharge Time Duration 345 108 Product Code 368 x 188 x 24mm ZES31M 72 3.6V (3 cell) 2.8Ah High Temperature Ni-Cd 55 Deg C intermittent max 50 Deg C continuous max 24 Hours 3 hour Maintained LED Options add suffix to product code CChrome WWhite The Starsign is the ideal blade luminaire where appearance is of importance. Product Code LengthWidth Depth ZES38 Maintained LED/ on Maintained LED N 395 192 ZES91M 60 8W Maintained 3 hour Dimensions 335 x 115 x 5mm (ex. legend) Void depth required = 60mm 3.6V (3 cell) 900mAh High Temperature Ni-Cd 55 Deg C intermittent max 50 Deg C continuous max 24 Hours 3 hour Cut out = 365 x 93mm 78 ™ rescape ™ rescape EMERGENCY This modern edge-lit blade fitting has a completely recessed body and is ideal for use where a prestigious appearance is required. EMERGENCY Battery Battery Temp Recharge Time Duration Product Code 79 Conversions LED Conversions Low Voltage Conversions LED Conversions An emergency conversion pack for almost every low voltage dichroic application The Retro Star is a complete replacement for existing 8 watt bulkhead gear trays. It can ‘ repair ‘ an 8 watt bulkhead in 2 minutes. Product Code ZE901 ZE911 Product Code 20-50W non-maintained 1-3 hour 20-50W maintained 1-3 hour ZES8000 Battery 6V 4AH Ni-CD Rating 50VA Duration 20W – 3 hour 50W – 1 hour To Suit 50mm Dia Cutout Specification Light Source High output White LED Construction Polycarbonate tray 4.8 Volt 900mA Nicad 50mA Nominal 230 Volt AC +10% -6% 50 Hz 305mm x 60mm x 18mm Battery Charge Current Input Voltage Size LED Conversions A complete 2D HF mains plus 2 x 1 watt LED emergency gear tray, which will retrofit into all the most popular 2D bulkheads LED Conversions Product Code An emergency conversion pack for use with any MR16 LED lamps ZESL16HF 16W 2D + 2 x 1W LED ZESL28HF 28W 2D + 2 x 1W LED ZESL38HF 38W 2D + 2 x 1W LED Product Code Maintained 3 hour Specification 240v Circuit Ballast Philips(or equal) HF Ballast Available in 16w, 28w and 38w versions Battery 12V (10 cell) 2300Ah High Temperature Ni-Cd Battery Temp 55 Deg C intermittent max 50 Deg C continuous max Charge Current 120 mA Recharge Time 24 Hours Duration 3 hour (minimum) To Suit 50mm Dia Cutout 80 Emergency Circuit Lamps Lumen Output Charge Current Battery Emergency Duration 2 x 1 watt White LED’s 160 lumens 130 mA 4.8 v 2.5 AH Nicad 3 hours Dimensions 260mm Dia ™ rescape ™ rescape EMERGENCY EMERGENCY ZES612M 81 LED Conversions LED Conversions LED Conversions LED Conversion Pack A complete 2D HF mains plus 2 x 1 watt LED emergency “ Top Hat “ A 2 x 1 watt LED emergency conversion pack, complete with battery stick, able to be fitted into almost any mains luminaire.. Product Code Product Code ZESH16HF 16W 2D + 2 x 1W LED ZESH28HF 28W 2D + 2 x 1W LED ZESH38HF 38W 2D + 2 x 1W LED ZESLP2 Specification Specification 240v Circuit Ballast Philips(or equal) HF Ballast Available in 16w, 28w and 38w versions Lamps Lumen Output Charge Current Battery Emergency Duration Emergency Circuit Lamps Lumen Output Charge Current Battery Emergency Duration 2 x 1 watt White LED’s 160 lumens 130 mA 4.8 v 2.5 AH Nicad 3 hours Dimensions L175mm x W155mm x H35mm 2 x 1W LED 2 x 1 watt White LED’s 160 lumens 130 mA 4.8 v 2.5 AH Nicad 3 hours Dimensions Charger Module Battery LED’s 82 ™ rescape ™ rescape L120mm x W28mm x H33mm L104mm x W52mm x H23mm 28mm Dia EMERGENCY EMERGENCY gear tray, which will retrofit into virtually all 2D luminaires. 83 Conversions Fluorescent Conversion Service Emergency Lighting Requirements Escape Routes Corridors etc When luminaires have been sited to cover the locations below, additional luminaires may be required to ensure minimum lighting levels are acheived 1 lux minimum on the centre line of the escape route Open Areas 0.5 lux minimum in the central area to 0.5 m of the walls Exit signs Signs should meet with the European Signs Directive and be either back illuminated or have an emergency luminaire within 2 metres of horizontal height. Signs shoud be of the same format througout the building Need to convert fluorescent fittings to emergency? Saturn offers a luminaire conversion service in our custom designed centre and can convert most standard fluorescent fittings for emergency. Where there is insufficient space within the luminaire a remote enclosure can be provided. Remote Convertion For further details please contact the Sales Office To provide illumination of escape routes Install within 2 metres of escape route junctions Install within 2 metres horizontal distance of a Install within 2 metres horizontal distance change of direction in an escape route of change in floor/stairs level (each tread to receive direct light) Install externally within 2 metres horizontal distance of any final exits Please note that sufficient light will be needed to muster a roll call Fire alarms, first aid points and fire fighting fighting equipment, install within 2 metres horizontal distance Should not be used as an escape route, but requires the same illumination to protect users on it when supply fails To provide emergency illumination in all lifts Motor generator, control and plant rooms for Open rooms either with a particular essential and safety services hazard, an escape route passing through a larger than 60m2 area We are now able to convert fluorescent fittings to LED emergency. Instead of relying on the fluorecent tubes within the fitting, why not fit LED’s to act as the emergency light source? The long lamp life of the LED will ensure light at the most vital times. 84 ™ rescape Areas of high risk sould be illuminated to 10% of normal lighting or 15 lux, whichever is greater EMERGENCY EMERGENCY For further details please contact the Sales Office Install in all toilets exceeding 8m2 area or where natural light is not present 85 Fire Alarm Panels Fire Alarm Accesories Product Code Fire Alarm Call Point FP1 FP2 FP4 FP6 FP8 FC1 monitoring 1 Zone Microprocessor panel c/w Batteries 2 Zone Microprocessor panel c/w Batteries 4 Zone Microprocessor panel c/w Batteries 6 Zone Microprocessor panel c/w Batteries 8 Zone Microprocessor panel c/w Batteries Resetable Surface call point c/w 470R resistor for Smoke Detector ™ restec SX Control Panel Fire Detectors The Prestec SX Control Panel range is housed in a light grey Flame Retardent UVLO enclosure designed to meet modern architectural surrounding with a removable hinged door. The Prestec SX has been designed with ease of installation in mind in addition to the robust electronic design. • Complies fully with EN54 Part 2 and Part 4 • Zone isolate facility • Microprocessor based • One man zone test facility • Built in detector removal line integrity • Front panel short circuit facility (no need for active E.O.L.) Ionisation Smoke Detector (excl. base) Optical Smoke Detector (excl. base) Rate of Rise Detector (excl. base) Fixed Temperature Heat Detector (excl. base) Detector Base (0-9 minutes, 1 minute increments) • Battery short circuit protection • Earth fault indication • Zone short circuit protection • Front panel alarm delay override facility • Fire change over relay output • Suitable for surface and semi-flush mounting • Fault change over relay output • CE marked • Class change • Meets the latest European low voltage • Top, bottom and rear entry Heat Detector Call Point • Programmable external sounder delay • Space for up to 2 x 6.0AH batteries directive • LCPB Approval Detector Base 86 ™ restec ™ restec FIRE ALARMS FIRE ALARMS FD1 FDO FDR FDH FDB 87 COMPONENTS & ACCESSORIES Fire Alarm Accesories Fire Alarm Sounders FS1 Sounder 24V 100dBA @ 1 metre (surface mount) FS2 Bedhead Sounder 24V 98dBA @ 1 metre (flush or surface mounted) FDSB Detector Base with built in Sounder 90dBA @ 1 metre FS4 High Power Sounder 24V 102dBA @ 1 metre (surface mount IP65) FS10 Xenon Strobe 24V FS11 Sounder/Strobe 24V 100dBA @ 1 metre (surface mount) Sounder Xenon Strobes Fire Alarm Ancillaries FIRE ALARMS Bedhead Sounders FM1 FM2 FR1 240V Magnetic Door Holder 24V Magnetic Door Holder Remote LED Indicator Gear Trays Lamps Capacitors Gear Boxes Discharge Ballasts Ignitors Switch Start Ballasts High Frequency Ballasts Lampholders and Accessories Cable, Accessories and Cut Outs Batteries Page 90 Page 91 Page 92 Page 92 Page 93 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Remote LED Magnetic Door Holder 88 ™ restec 89 Gear Trays Lamps Single Switch Start GT00812” GT01518” GT018 2ft GT030 3ft GT036 4ft GT058 5ft GT070 6ft Twin Switch Start 8W 15W 18W 30W 36W 58W 70W Triple Switch Start 90 8W 15W 18W 30W 36W 58W 70W GT400812” GT401518” GT4018 2ft GT4030 3ft GT4036 4ft GT4058 5ft GT4070 6ft Twin High Frequency GTHF018 GTHF036 GTHF058 GTHF070 GTHF2018 GTHF2036 GTHF2058 GTHF2070 18W 36W 58W 70W 2ft 4ft 5ft 6ft DLS70I 70W SON-I E27 (ES) DLS70TD DLS150TD 70W 150W SON double ended SON double ended R7s R7s DLS70E DLS150E DLS250E DLS400E 70W 150W 250W 400W SON-E SON-E SON-E SON-E E27 (ES) E40 (GES) E40 (GES) E40 (GES) 8W 15W 18W 30W 36W 58W 70W DLS150T DLS250T DLS400T DLS600T DLS1000T 150W 250W 400W 600W 1000W SON-T SON-T SON-T SON-T SON-T E40 (GES) E40 (GES) E40 (GES) E40 (GES) E40 (GES) DLM70TD 70W DLM150TD 150W HQI double ended (NDL) HQI double ended (NDL) R7s R7s DLM70E DLM150E 70W 150W HQI Eliptical HQI Eliptical E27 (ES) E27 (ES) DLM150T DLM250T DLM400T DLM600T 150W 250W 400W 600W HQI Tubular HQI Tubular HQI Tubular HQI Tubular E40 (GES) E40 (GES) E40 (GES) E40 (GES) DLF80 80W DLF125 125W DLF250 250W DLF400 400W Coloured Lamps MBF/U MBF/U MBF/U MBF/U E27 (ES) E27 (ES) E40 (GES) E40 (GES) Blue, green or magenta (please state when ordering) DLM70C 70W HQI double ended DLM150C 150 HQI double ended DLM400C 400W HQI Extralux (Agricultural Lamps) R7s R7s E40 (GES) 18W 36W 58W 70W Triple High Frequency Quad High Frequency GTHF3018 GTHF3036 GTHF3058 GTHF3070 GTHF4018 GTHF4036 GTHF4058 GTHF4070 2ft 4ft 5ft 6ft 8W 15W 18W 30W 36W 58W 70W Quad Switch Start Single High Frequency 2ft 4ft 5ft 6ft Type 18W 36W 58W 70W 2ft 4ft 5ft 6ft 18W 36W 58W 70W N.B All gear trays supplied c/w leads, lampholders and terry clips DLS400EX 400W SON-T DLS600EX 600W SON-T Plantmax (High Output Agricultural Lamps) E40 (GES) E40 (GES) DLS600PMX 600W E40 (GES) ® reslite Cap ® reslite SON-T COMPONENTS and ACCESSORIES COMPONENTS and ACCESSORIES GT300812” GT301518” GT3018 2ft GT3030 3ft GT3036 4ft GT3058 5ft GT3070 6ft GT200812” GT201518” GT2018 2ft GT2030 3ft GT2036 4ft GT2058 5ft GT2070 6ft Lamps 91 Capacitors and Control Gear Discharge Control Gear CapacitorsµF CFC2 CFC4 CFC6 CFC72 CFC8 CFC84 CFC10 CFC12 CFC16 CFC20 CFC25 CFC30 CFC35 CFC40 CFC45 CFC50 CFC60 Discharge Ballasts Voltage 2.0 4.0 6.0 7.2 8.0 8.4 10.0 12.0 16.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 60.0 Mecury Vapour (MBF) Watts 250 250 250 440 250 440 250 250 250 250 250 250 250 250 250 250 250 CDF5050 CDF8080 CDF125125 CDF250250 CDF400400 Metal Halide (HQI) Watts Sodium (SON) COMPONENTS and ACCESSORIES 92 CBM35E 35W CBM70E 70W CBM150E 150W SON SON SON SON SON SON SON HQI HQI HQI reslite Input Voltage 6 8 10 13 20 Cap. µF Watts Input Voltage Cap. µF CDS5050 230/240 8 CDS70 70230/24010 CDS100100 230/240 12 CDS150150 230/240 20 CDS250250 230/240 30 CDS400400 230/240 40 CDS600600 230/240 50 CDS10001000 220/240 100 Ignitors Ignitors Watts CBM70 70W HQI CBM150 150W HQI CBM250 250W HQI CBM400 400W HQI CBM1000 1000W HQI Encapsulated Gear Boxes (interior) Encapsulated Gear 240 240 240 240 240 SON M/Halide SOX Type Load Length CDI 235-70 CDI 670-400 CDI 121000 Super Super Super 1m 1m 1m CDI 6/T70-400 Timed 1m CDI 6/P70-400 Pulse 30m CDI 535-55 CDI 790 ® ® reslite Pulse Pulse 20m 20m COMPONENTS and ACCESSORIES CBF5050W MBFU CBF8080W MBFU CBF125125W MBFU CBF250 250W MBFU CBF400 400W MBFU CBF1000 1000W MBFU CBS50 50W CBS70 70W CBS100 100W CBS150 150W CBS250 250W CBS400 400W CBS10001000W Cap. µF CDM70 7024012 CDM150150 240 20 CDM250250 240 18 CDM400400 240 30 CDM10001000 240 100 Discharge Gear Boxes (interior) Discharge Gear Box Input Voltage 93 High Frequency Ballasts Watts Lamp LengthCap. MFD CFB8A 1 x 6 2 x 6 CFB13A 1 x 13 1 x 13 2 x 8 CFB16A 1 x 16 CFB20A 1 x 18/24/26 1 x 18/24/26 CFB28A 1 x 28 CFB30A 2 x 15 CFB40A 1 x 38 1 x 36 2 x 18/20 2 x 18 2 x 18 CFB65A CFB75A 1 x 8 225 225 1 x 13 Compact Compact 300 1 x 16 2D 1 x 18/20 Compact Compact 1 x 28 2D 1 x 30 450 1 x 36/40 2D Compact 600 Compact Compact 1 x 58/65 1 x 70/75 300 2 2 525 2 2 2 2D 2 600 4 4 2D 4 900 4 1200 4 4 4 4 4 1500 1800 Detail 2 Series Circuit 2 2-pin 4-pin Series Circuit 2 4-pin 4 2-pin 4-pin 4 4-pin 4 Series Circuit 4 2-pin 2-pin Lamp Non-dimmable Lamp Length No. of Wattage CFH218 CFH136 CFH158 CFH170 CFH40C CFH118 CFH236 CFH258 CFH270 CFH240C CFH155C CFH255C 60018 120036 150058 180070 Compact40 60018 120036 150058 180070 Compact40 Compact55 Compact55 0-10V Dimmable Lamp Lamp No. of Length WattageLamps Lamps CHFD218 600 18 CFHD1361200 36 CFHD1581500 58 CFHD1701800 70 CFHD40C Compact40 CFHD118 600 18 CFHD2361200 36 CFHD2581500 58 CFHD2701800 70 CFHD240CCompact 40 CFHD155CCompact 55 CFHD255CCompact 55 Series Circuit 2-pin 4-pin 5 6 MDIM1 94 2 1 1 1 1 1 2 2 2 2 1 2 2 1 1 1 1 1 2 2 2 2 1 2 COMPONENTS and ACCESSORIES COMPONENTS and ACCESSORIES Switch Start Ballasts 0-10v Dimmer Switch 95 ® reslite ® reslite Accessories Accessories Code 1 2 3 5 4 6 8 Code Pic. Ref. Description CST51 CST8 1 CST12 1 T5 Terry Clip T8 Terry Clip T12 Terry Clip CSB1 12 Fused Terminal Block CSS1 13 Starter Holder (clip in) CSP1 2 Monkey Puzzle CSS3 14 Starter Holder (clip in) CSL10 3 T8 Tombstone Lampholder CSS10 CSS20 CSS30 CSS4 15 16 17 18 FSU 4-65w Starter Switch FS2 4-22w Starter Switch FS125 70-125w Starter Switch EFS 600 Pulse Starter CSL20 4 c/w starter holder T8 Tombstone Lampholder CSL2D CSL4D 5 5 2D 2 Pin Lamp[holder 2D 4 Pin Lampholder CSL30 CSL40 6 6 E27 P/Lain Lampholder E40 (GES) P/Lain Lampholder CSL57 CSL8 7 CSL12 7 T5 End Cap Lampholder T8 End Cap Lampholder T12 End Cap Lampholder CSL15 8 CSL25 9 c/w starter holder Clip in Lampholder Clip in Lampholder CSL26 CSLPLL 2 pin PL Lampholder 4 Pin PLL Lampholder 10 11 CCAB 19 0.5mm heat Resistant Luminaire Internal Wiring Cable Available in White, Blue, Brown, Green/Yellow, Orange, Pink Gray and Yellow CPC1 CPC1 20 21 DCC01 22 DCC02 22 DCCF6 Photocell Unit Photocell Unit c/w Remote Sensor 13 14 15 16 17 18 20 Double Pole Cut out Single Fuse Double Pole Cut out Double Fuse 6 amp Fuse for Cut out 21 22 9 19 10 12 11 96 ® reslite ® reslite COMPONENTS and ACCESSORIES COMPONENTS and ACCESSORIES 7 Description Pic. Ref. 97 Accessories Repairs Repair And Refurbishment CodeDescription BT12 BT14 BT16 BT18 BT19 2.4v 4.0Ah NI-CAD 2 Cell battery stick 3.6v 4.0Ah NI-CAD 3 Cell battery stick 4.8v 4.0Ah NI-CAD 4 Cell battery stick 6.0v 4.0Ah NI-CAD 5 Cell battery stick 7.2v 4.0Ah NI-CAD 6 Cell battery stick BT112 BT119 BT126 BT160 BT610 12v 1.2Ah SLA battery 12v 1.9A/2.2h SLA battery 12v 2.6/3.3Ah SLA battery 12v 6.0Ah SLA battery 6v 12Ah SLA battery ave you got flickering fluorescents or a faulty flood? Perhaps you have H fittings with switch start ballasts that you want to keep but their energy requirements make them to costly to run. Then let us quote for the repair or refurbishment of those fittings. We are able to test fittings and replace faulty components or burnt out wiring. We can strip out the old costly to run switch start ballasts and replace them with energy efficient high frequency ballasts. Just ring our Sales Office and we can discuss your needs. COMPONENTS and ACCESSORIES COMPONENTS and ACCESSORIES TEL: 01204 575100 98 ® reslite ® reslite 99 Ingress Protection (IP Rating) Technical Starting Currents / Running Currents SON Starting Current (A) Running Current (A) HQI Starting Current (A) Running Current (A) MBFU Starting Current (A) Running Current (A) 70 Watt 0.60 0.50 70 Watt 0.71 0.56 80 Watt 0.51 0.38 150 Watt 1.00 0.80 150 Watt 1.02 0.80 125 Watt 1.13 0.68 250 Watt 2.72 1.49 250 Watt 1.87 1.18 250 Watt 1.69 1.18 400 Watt 2.99 2.47 400 Watt 2.70 1.97 400 Watt 3.25 2.26 1st number = Protection against solids 2nd number = Protection against liquids 0 No protection 0 No protection 1 Protection against solid objects over 50mm 1 Protection against vertically dripping water 2 Protection against solid objects over 12mm 2 Protection against direct sprays of water up to 15° from the vertical 3 Protection against solid objects over 2.5mm 3 Protection against direct sprays of water up to 60° from the vertical 4 Protection against solid objects over 1mm 4 Protection against direct sprays of water from any direction 5 Protection against harmful deposits of dust 5 Protection against low pressure jets of water from any direction 6 Protection against any ingress of dust 6 Protection against strong pressure jets of water from any direction Maximum Recommended No Lamps per Type C Circuit Breaker Amps 10 16 20 25 70 Watt 12 18 23 28 150 Watt 7 11 14 17 250 Watt 5 7 9 11 7 Protection against immersion down to 1m 400 Watt 3 4 5 7 8 Protection against long periods of immersion under pressure Emergency Fitting Types COMPONENTS and ACCESSORIES Ballast Capacitor Values 100 High Pressure Sodium (SON) Ballasts Metal Halide (HQI) Ballasts Wattage Capacitor RefWattage Capacitor Ref. 50 w CFC10 10uf 70 w CFC12 12uf 70 w CFC12 12uf 150 w CFC20 20uf 150 w CFC20 20uf 250 w CFC20 20uf 250 w CFC30 30uf 400 w CFC25 25uf 400 w CFC40 40uf 1000 w 2 x CFC50 50uf 600 w CFC50 50uf 1000 w 2 x CFC50 50uf Mercury (MBFU) Ballasts Wattage Capacitor Ref. 50 w CFC6 6uf 80 w CFC8 8uf 125 w CFC10 10uf 250 w CFC20 20uf 400 w CFC25 25uf NON-MAINTAINED The lamp in the luminaire ONLY operates from the inbuilt emergency supply, and ONLY when the normal supply fails. THE LAMP IS NOT LIT IN NORMAL MAINS HEALTHY MODE. The lumen out put of the lamp in emergency mode is a function of the batteries and NOT the lamp rating MAINTAINED The lamp or lamps in the luminaire can be operated as a normal light source and switched on or off as required. This is achieved by supplying two mains supplies to the luminaire ( one permanent supply and one switched supply), on failure of the mains supply the lamp connected to the inbuilt emergency supply remains illuminated. The lumen out put of the lamp in emergency mode is a function of the batteries and NOT the lamp rating SUSTAINED (COMBINED) ® reslite An emergency luminaire with at least two lamps. One of the lamps operates ONLY from the inbuilt emergency supply and is not lit in normal operation. 101 Notes Notes Saturn Lighting Returns Policy SHORT DELIVERIES/DAMAGES ALL GOODS SHORT DELIVERED OR DAMAGED IN TRANSIT MUST BE REPORTED TO SATURN LIGHTING WITHIN THREE DAYS INCORRECTLY SUPPLIED GOODS ERRORS MUST BE NOTIFIED WITHIN THREE DAYS ALL GOODS TO BE RETURNED MUST HAVE A RETURNS REFERENCE NUMBER RAISED BY SATURN LIGHTING FAULTY GOODS ALL GOODS WILL BE REPAIRED AND RETURNED TO END CLIENT/WHOLESALER ALL GOODS SUPPLIED AS AN ADVANCED REPLACEMENT ARE CHARGEABLE ALL GOODS FOUND TO BE WORKING WILL BE RETURNED AND THE WHOLESALER WILL BE CHARGED A LABOUR AND RETURN CARRIAGE CHARGE ALL GOODS THAT ARE RETURNED MUST FALL WITHIN THE 1 YEAR WARRANTY PERIOD INCORRECTLY ORDERED GOODS A STANDARD CHARGE OF 30% WILL BE APPLIED TO ALL GOODS ALL GOODS TO BE RETURNED AT WHOLESALERS COST ALL GOODS THAT ARE RETURNED MUST BE IN ORIGINAL PACKAGING AND BE IN A RESALEABLE CONDITION ALL GOODS MUST BE CURRENT AND NOT DISCONTINUED ALL PRODUCTS MANUFACTURED OR DEEMED SPECIALS BY SATURN ARE NON RETURNABLE 104