6" Flat Frame-in Kit For Ceramic Metal Halide Lamps

advertisement
Job Information
Type
Project Name
A6701
Location
6" Flat Frame-in Kit
For Ceramic Metal Halide Lamps
Date
Quantity
Contact/Phone
Notes
Features
Mounting Frame
Constructed of 22ga galvanized steel
for optimum rigidity. The frame includes
a ½" deep collar to provide a perfect fit
with the ceiling hole. Hanger bar tracks
provided on all sides to allow long-side
or short-side mounting.
a vertically adjustable socket (for
medium base lamp configuration) to
accommodate the various types of
trims. Four screws attach the can to the
mounting frame and provide vertically
adjustable collar depth to accommodate
various ceiling thicknesses.
Junction Box
Electrical
Listed for through branch circuit wiring.
Maximum eight no. 12 AWG 90°C
branch-circuit conductions (four in and
four out). Five ½" knockouts with true
pry-out slots and three knockouts with
Romex® cable clamp. Ground wire is
provided on J-Box.
Integral high power factor (HPF)
electronic ballast with 120 or 347 volt
input at 50/60 Hz operation and Class A
sound rated.
Housing Can
Constructed of 22ga painted steel to
prevent corrosion. The can houses
Labels
cETLus listed.
System Protection
Integral thermal protector (RP1B thermo
coupler) attached to the junction box
to guard against misuse of insulation
around the fixture and overheating of
the fixture.
Description
The A6701 is an architectural grade 6"
aperture flat frame-in kit for ceramic
metal halide lamps. The A6701 is
designed for use in non-insulated
ceilings in pre-drywall commercial and
architectural construction. A wide choice
of trim types, including reflectors, lenses
and wall wash trims, is available for use
with the A6701.
7-5/8"
194mm
6-1/8"
156mm
8"
203mm
Notes: Accessories should be ordered
separately. For additional options please
consult your Liteline representative. Romex is a
registered trademark of Southwire Company.
Due to our continued efforts to improve our
products, product specifications are subject to
change without notice.
11-3/4"
298mm
Ordering Guide
Ballast Voltage*
A6701 -
Lamp Type
Wattage
H120 : 120V HPF
H277 : 277V HPF
H347 : 347V HPF
ED17 : ED17MH, 100W max.
P30MH : PAR30CMH, 70W max.
P38MH : PAR38CMH, 100W max.
R111 : R111MH, 70W max.
T4 : T4MH, 70W max.
T6 : T6MH, 70W max.
22 : 22W
38 : 38W
39 : 39W
70 : 70W
100 : 100W
* Lamp wattage under 70 watts not available in 347V. ** Beam spreads available for T4 & T6 lamps only.
Example: ATF1010-20-BK
Liteline Corporation
info@liteline.com
www.liteline.com
REV014-1.16.12
8 Abacus Road
Brampton, Ontario
Canada L6T 5B7
PHONE | TÉLÉPHONE
416-996-1856
1-866-730-7704
Beam Spread**
FAX | TÉLÉCOPIEUR
905-794-1990
1-888-738-9736
NSP : Narrow Spot Beam (10°)
MED : Medium Spread Beam (25°)
WFL : Wide Flood Beam (45°)
Download