FMC104
www.4dsp.com
FMC104 low pin count FMC ADC
4-channel 14-bit ADC - 250 Msps
Description
The FMC104 is a four-channel ADC FMC (FPGA Mezzanine Card) Daughter Card
Features
which is fully compliant with the VITA 57.1-2008 standard. The FMC104 card provi-
• Four channel 14-bit 250 Msps A/D conversion
des four 14-bit 250 Msps A/D channels which can be sampled by an internal clock
• Available as air cooled and conduction cooled
source (optionally locked to an external reference) or an externally supplied sample
• VITA 57.1-2008 compliant
clock. A trigger input for customized sampling control is also available.
• Based on TI ADS62P49
The FMC104 has the LPC (Low-Pin Count) 160-Pin connector, front panel I/O,
• LVDS or 1.8V LVCMOS output operation
and is conduction cooled compliant. The board is also available with Mil-I-46058c
• Coaxial front panel inputs on SSMC connectors
compliant Conformal Coating.
• Single ended AC- or DC-coupled analog input
Another important feature of the FMC104 is the ability to cascade multiple FMC
• Optional analog differential input
boards supported by a single clock frequency.
• Flexible clock tree enables:
The design is based on the TI ADS62P49 Dual Channel 14-bit 250 Msps ADC with
- internal clock
programmable DDR LVDS or parallel LVCMOS outputs. The analog signal inputs
- external clock
can be either single ended or differential, AC- or DC coupled connecting to SSMC
- cascading multiple boards - Optional
coaxial connectors on the front panel.
• LPC (Low-Pin Count) 160-Pin Connector
The FMC104 allows flexible control on sampling frequency, analog input gain, and
• Mil-I-46058c Conformal Coating Compliant -
offset correction through serial communication with a carrier card. Furthermore the
Optional
card is equipped with power supply and temperature monitoring and offers several
power-down modes to switch off unused functions.
Applications
• Software defined radio (SDR)
• RADAR/SONAR
OPTIONAL
Clock Output
• Wireless communication receivers
• Medical equipment
Reference
Clock or
Sample
Clock
Monitoring
Clock
Clock Tree
• User Manual
FMC Connector
LPC 160 Pins
Clock + Data
ADS62P49
14-bit, 250 Msps
Support
Status & Control
Trigger
ADC A
• Aerospace and test measurement instruments
• Performance Guide
• Reference firmware design (VHDL)
• Reference ISE project for Virtex-5, Virtex-6
and Spartan-6
• Email support (support@4dsp.com)
Status & Control
ADC D
www.4dsp.com/FMC104
Corporate Offices:
4DSP LLC • 10713 Ranch Road 620 N • Suite 522
Austin • TX 78726 • USA
T +1 800 816 1751 • sales@4dsp.com
European Offices:
4DSP BV • Ondernemingsweg 66f • 2404 HN
Alphen a/d Rijn • The Netherlands
T +31 (0) 172 782 190 • saleseurope@4dsp.com
For Digital Signal Processing
design & system integration
FMC104
www.4dsp.com
Performance
FMC104 Performance
• 700MHz Bandwidth (AC)
12,5
90
Fs = 250Msps
Full scale input
AC-coupled
12,0
• 10dBm analog inputs (2Vpp)
11,5
• 0dBm clock input (typ.)
11,0
75
10,5
70
10,0
65
9,5
60
9,0
55
8,5
50
ENOB [bits]
• 80dB Cross-Talk
• (LV)TTL compatible trigger
Ordering information
FMC104-2-1-1-1
80
50
45
40
35
0
0
0
0
SNR
0
0
0
0
0
ENOB
30
25
20
15
10
Fin [MHz]
50
Temperature Range
Industrial (-40ºC to + 85ºC) = 1
Commercial (0ºC to + 70ºC) = 2
85
SNR [dBFs] / SFDR [dBc]
320MHz Bandwidth (DC)
SFDR
Cascade Option
No Cascade Option = 1
Add Cascade Option = 2
Analog Signal Input
Standard Feature - Single-Ended AC Coupling = 1
Standard Feature - Single-Ended DC Coupling = 2
OPTIONAL - Differential AC Coupling = 3
OPTIONAL - Differential DC Coupling = 4
Mil-I-46058c Conformal Coating
No Conformal Coating = 1
Add Conformal Coating = 2
Environmental
Level A
Level B
Operating Temperature
0°C to 70°C
-40°C to 85°C
Storage Temperature
-50°C to 125°C
-50°C to 125°C
Humidity-Operating
0 to 100% non
0 to 100% non
condensing
condensing
Storage Humidity
0 to 100%
0 to 100%
Vibration Random
0.1 g2 /Hz
0.1 g2 /Hz
10 - 3kHz
10 - 3kHz
Shock
30g peak
30g peak
Coating
none
Conformal
Talk to us about your algorithmic requirements, 4DSP is a full-service firmware and software development house. We are specialist at high
performance FFT and Video Processing. Check with us, we may have IP Cores that meet requirements for your application, right off the shelf.
Corporate Offices:
4DSP LLC • 10713 Ranch Road 620 N • Suite 522
Austin • TX 78726 • USA
T +1 800 816 1751 • sales@4dsp.com
European Offices:
4DSP BV • Ondernemingsweg 66f • 2404 HN
Alphen a/d Rijn • The Netherlands
T +31 (0) 172 782 190 • saleseurope@4dsp.com
For Digital Signal Processing
design & system integration