Catalog
Number
Notes
Type
E-SERIES LED Lamps
ALEBR40
BR40 LED Lamp
ECONOMY GRADE
FEATURES & SPECIFICATIONS
LISTING
UL and C-UL Listed to U.S. and Canadian safety requirements.
Damp location listed.
Tested in accordance with IESNA LM-79 standards.
Suitable for use in totally enclosed fixtures per UL1993.
ENERGY STAR® qualified.
INTENDED USE
Ideal for general purpose use in both commercial and residential applications.
CONSTRUCTION
Housing: Diecast aluminum heat sink.
EXPECTED LIFE
35,000 hours - L70 lumen depreciation design criteria.
Rated life 25,000 hours - L70 after 6000 hours, initial ENERGY STAR® qualification tested.
WARRANTY
Five-year limited warranty. Complete warranty terms located at:
http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
LUMEN OUTPUT
1045 lumens (1045L)
Operating Temperature: -22­­°F to 113 °F (-30 °C to +45 °C)
Color Temperature (CRI): 2700K (80 CRI)
Beam Angle: Flood - 120°
DIMENSIONS
Diameter: 4.88”
Length: 6.3”
Weight: 1.24 bs.
All dimensions are inches.
ELECTRICAL SYSTEM
17-watt (1045L) high efficiency integral driver 110-120VAC.
Actual wattage may differ by +10%/-15% when operating between 110-120V +/- 10%.
Dimmable down to 10%.
Note: Specifications subject to change without
notice. Actual performance may differ as a result
of end user environment and application.
ORDERING INFORMATION
Example: ALEBR40 1045L DIM M12
For shortest lead times, configure products using bolded options.
LED LAMP
Series
ALEBR40
Lumen output1
BR40 LED Lamp
1045L
17W, 1045 lumens
Color temperature
(blank)
2700K
Base
(blank)
Dimming
E26 base
DIM Dimmable
Packaging
M12
Masterpack of 12
Notes
1 Total system delivered lumens.
See page 2 for Photometric Data
Page 1 of 2
ALEBR40 — BR40 LED Lamp
ECONOMY GRADE
LED LAMP AND DIMMER COMPATIBILITY
Mfg
Cat No.
Dimming Method
Acuity Brands-Sensor Switch
Acuity Brands-Synergy
Acuity Brands-Synergy
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
Crestron
ETC ELV 1.2KW
Leviton Universal-Decora
Leviton Universal-Decora
Leviton-Rotary Dial
Leviton
Leviton
Leviton
Leviton
Leviton
Leviton
Leviton
Leviton
Lutron
Lutron
Lutron
Lutron
Lutron Maestro CL
Lutron Diva CL
Lutron Skylark CL
Lutron
Lutron
Lutron RadioRA2
Lutron HomeWorks QS
Lutron Graphic Eye QS
Lutron Graphic Eye QS
Lutron Graphic Eye QS
Neptun
nLight NSP5 PCD 2W
ISDELV400120WH
SYPMB 6D Line voltage Module
CLX-1DIM4
CLX-1DIM8
CLX-2DIM2
CLX-2DIM8
CLX-1DELV4
DIN-1DIM4
DIN-1DIMU4
CLW-DIMEX-E
CLW-DIMEX-P
CLW-DIMSWEX-E
CLW-DIMSWEX-P
P-DIMEX
GLX-DIM6
GLXX-2DIM8
Paradigm Control Processor
6674P
IPL06
6304
6633-P
6681
IPIO6
6613-P
6631-LW
6161-I
RPIO6-1
IPE04-1LZ
TG-603P
TG-600P
AY-103P
C-L wall mount Dimmers
MACL-153M
DVCL-153PD
CTCL-153P
S-600P
DV-600P
RRD-6NA
HQRD-6NA
PHPM-PA
PHPM-WBX 3 wire fluorescent
Main unit family
Apollo 80005
Forward Phase
ISDELV400120WH
Forward Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Reverse Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Reverse Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Forward Phase
Phase Adaptive
Neutral Adaptive
Reverse Phase
Reverse Phase
Forward Phase
Forward Phase
Wattage
Note: Most forward phase dimmers have a minimum
load requirement of 40-60 watts. A single 17W
watt LED lamp on a 600W dimmer may flicker if the
minimum load requirement is not met, consider
a synthetic minimum load, LUTRON-LBX or other
equivalent. This requires a 2-gang wall box and
additional wiring to the dimmer.
Comments
400W
Adjust low end trim
Adjust low end trim
Adjust low end trim
Adjust low end trim
Adjust low end trim
Adjust low end trim
Adjust low end trim
Dimmer requires a direct connection to neutral to ensure operation. Enforce Crestron Min
level not only to avoid flicker, but to prevent
initial flashing/disortion when ramping up
the fixture output.
1.2Kw
600W
600W
300W
600W
600W
600W
600W
600W
500W
600W
400W
600W
600W
1000W
600W
600W
600W
600W
600W
600W
600W
600W
1920W
1920W
Depending on the quantity of LED lamps on the dimming circuit, an approximate 10% to 100% dimming
range may be obtainable. Most available dimmers
were designed around older technology and resistive
or incandescent lamp loads, therefore performance
can vary with LED load and is not guaranteed. Please
see the manufacturer’s instructions on dimmers for
use with LED lamps and do not exceed the 150W LED
load for 600W rated dimmer.
Adjust low end trim
Adjust low end trim
Adjust low end trim
Adjust low end trim
Adjust low end trim
Lamp Base dimmer
Adjust low end trim
Adjust low end trim
Adjust low end trim
Adjust low end trim
Adjust low and high end trim. Set load to FP
Adjust low and high end trim. Set load to FP
Adjust low and high end trim. 10W min load
Adjust low and high end trim.
600W
Acculamp LED–20 Amp Circuit Load
REPLACEMENT CHART
Lamp
Type
Traditional
Source
Acculamp
Replacement
Nomenclature
BR40
100W Incandescent
17W BR40 LED
ALEBR40 1045L DIM
Use the table below as a guide, for the approximate quantity of Acculamp LED lamps on a typical standard 20-amp circuit (derated
to 80% - 16 amps). Use a licensed electrician to determine proper wire gauges and circuit breakers according to the National
Electrical Code and local codes. Do not overload circuit with more lamps than the approximate quantity shown below for a typical
standard 20-amp circuit breaker for approximately 7X multiple of inrush current. Circuit breakers with higher inrush trip curve
characteristics, such as High Magnetic types, are available. Consult with a licensed electrician for proper determination.
Lamp Model
Wattage
ALEBR40 1045L DIM
17W
Operating Amps Approx. Quantity
0.138
115
SHEET# ALEBR40 — BR40 LED LAMP (E-SERIES) LAMPS AND TRACK: One Lithonia Way Conyers, GA 30012 Phone: 800.533.7728 Fax: 770-918-1209 www.acculamp.com Page 2 of 2
© 2010-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/10/13