LED LAMP AND DIMMER COMPATIBILITY 5---29---13 LAMP: acculamp® ALSP20 DIM PAR20 8W DIMMABLE VERSIONS Mfg Acuity Brands --- Sensor Leviton Leviton Leviton Leviton Leviton Leviton Leviton Lutron Lutron Lutron Lutron Lutron Lutron Lutron ELV Digital Fade Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron HomeWorks QS Lutron RadioRA2 Cat No. nLight NSP5 PCD ELV 120 6633---P 6681 IPIO6 6613---P 6631---LW 6161---I RPIO6---1 TG---603P AY---103P DV---600P DVCL---153PD TG---600P C---L wall mount Dimmers MRF2---6ELV PHPM---PA PHPM---WBX 3 wire Main unit family HQRD---6NA RRD---6NA Dimming Method Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Reverse Phase Reverse Phase Forward Phase Neutral Adaptive Phase Adaptive Wattage 480W 600W 600W 600W 600W 600W 500W 600W 600W 1000W 600W 600W 600W 600W 600W 1920W 1920W 600W 600W Comments maximum load Adjust low end trim Adjust low end trim Adjust low end trim. Set load type to reverse phase Adjust low and high end trim. Set load type to reverse phase. Adjust low and high end trim. Set load type to reverse phase. Adjust low end trim Adjust low and high end trim. Set load type to reverse phase. Adjust low end trim. Set load type to reverse phase Note: Most Forward Phase Dimmers have a minimum load requirement of 40---60 watts. A single 8 Watt LED lamp on a 600 W dimmer may flicker due to the minimum load requirement is not met. If the minimum dimmer load is not met, consider a synthetic minimum load, LUTRON--- LUT---LBX or other equivalent. This requires a 2 gang wall box and additional wiring to the dimmer. Depending on the quantity of LED lamps on the dimming circuit, an approximately 10%---100% dimming range may be obtainable. Most available dimmers were designed around older technology and resistive or incandescent lamp loads, therefore, performance can vary with LED load and is not guaranteed. Please see the manufactures instructions on dimmers for use with LED lamps and do not exceed the 150 Watt LED load for 600W rated dimmer. LED LAMP AND DIMMER COMPATIBILITY 5---29---13 LAMP: acculamp® ALSP30 DIM PAR30 15W DIMMABLE VERSIONS Mfg Acuity Brands --- Sensor Acuity Brands --- Synergy Leviton Leviton Leviton Leviton Leviton Leviton Leviton Leviton Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron ELV Digital Fade Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron HomeWorks QS Lutron RadioRA2 Neptun Cat No. nLight NSP5 PCD ELV 120 ISDELV400120WH 6633---P 6681 IPIO6 6613---P 6631---LW 6161---I RPIO6---1 IPE04---1LZ TG---603P TG---600P AY---103P DV---600P DVCL---153PD S---600P C---L wall mount Dimmers MRF2---6ELV PHPM---PA PHPM---WBX 3 wire Main unit family HQRD---6NA RRD---6NA Apollo 80005 Dimming Method Reverse Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Reverse Phase Reverse Phase Forward Phase Neutral Adaptive Phase Adaptive Forward Phase Wattage 480W 400W 600W 600W 600W 600W 600W 500W 600W 400W 600W 600W 1000W 600W 600W 600W 600W 600W 1920W 1920W Comments maximum load Adjust low end trim Adjust low and high end trim. 10W min load Adjust low and high end trim. 600W 600W 600W Note: Most Forward Phase Dimmers have a minimum load requirement of 40---60 watts.A single 15 Watt LED lamp on a 600 W dimmer may flicker due to the minimum load requirement is not met. If the minimum dimmer load is not met, consider a synthetic minimum load, LUTRON--- LUT---LBX or other equivalent. This requires a 2 gang wall box and additional wiring to the dimmer. Depending on the quantity of LED lamps on the dimming circuit, an approximately 10%---100% dimming range may be obtainable. Most available dimmers were designed around older technology and resistive or incandescent lamp loads, therefore, performance can vary with LED load and is not guaranteed. Please see the manufactures instructions on dimmers for use with LED lamps and do not exceed the 150 Watt LED load for 600W rated dimmer. LED LAMP AND DIMMER COMPATIBILITY 5---29---13 LAMP: acculamp® ALSP30 DIM PAR30 ANSI SHORT NECK 11W DIMMABLE VERSIONS Mfg Acuity Brands --- Sensor Acuity Brands --- Synergy Leviton Leviton Leviton Leviton Leviton Leviton Leviton Leviton Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron ELV Digital Fade Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron HomeWorks QS Lutron RadioRA2 Neptun Cat No. nLight NSP5 PCD ELV 120 ISDELV400120WH 6633---P 6681 IPIO6 6613---P 6631---LW 6161---I RPIO6---1 IPE04---1LZ TG---603P TG---600P AY---103P DV---600P DVCL---153PD S---600P C---L wall mount Dimmers MRF2---6ELV PHPM---PA PHPM---WBX 3 wire Main unit family HQRD---6NA RRD---6NA Apollo 80005 Dimming Method Reverse Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Reverse Phase Reverse Phase Forward Phase Neutral Adaptive Phase Adaptive Forward Phase Wattage 480W 400W 600W 600W 600W 600W 600W 500W 600W 400W 600W 600W 1000W 600W 600W 600W 600W 600W 1920W 1920W 600W 600W 600W Comments maximum load Adjust low end trim Set load type to reverse phase Adjust low and high end trim. 10W min load Adjust low and high end trim. Set load type to reverse phase Set load type to reverse phase Note: Most Forward Phase Dimmers have a minimum load requirement of 40---60 watts.A single 11 Watt LED lamp on a 600 W dimmer may flicker due to the minimum load requirement is not met. If the minimum dimmer load is not met, consider a synthetic minimum load, LUTRON--- LUT---LBX or other equivalent. This requires a 2 gang wall box and additional wiring to the dimmer. Depending on the quantity of LED lamps on the dimming circuit, an approximately 10%---100% dimming range may be obtainable. Most available dimmers were designed around older technology and resistive or incandescent lamp loads, therefore, performance can vary with LED load and is not guaranteed. Please see the manufactures instructions on dimmers for use with LED lamps and do not exceed the 150 Watt LED load for 600W rated dimmer. LED LAMP AND DIMMER COMPATIBILITY 5---29---13 LAMP: acculamp® ALSP38 DIM PAR38 20W DIMMABLE VERSIONS Mfg Acuity Brands --- Sensor Acuity Brands --- Synergy Acuity Brands --- Synergy Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron ETC ELV 1.2KW Leviton Leviton Leviton Leviton Leviton Leviton Leviton Leviton Leviton---Rotary Dial Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron HomeWorks QS Lutron RadioRA2 Neptun Cat No. nLight NSP5 PCD ELV 120 SYPMB 6D Line voltage ISDELV400120WH CLX---1DIM4 CLX---1DIM8 CLX---2DIM2 CLX---2DIM8 CLX---1DELV4 DIN---1DIM4 DIN---1DIMU4 CLW---DIMEX---E CLW---DIMEX---P CLW---DIMSWEX---E CLW---DIMSWEX---P P---DIMEX GLX---DIM6 GLXX---2DIM8 Paradigm Control Processor 6633---P 6681 IPIO6 6613---P 6631---LW 6161---I RPIO6---1 IPE04---1LZ 6304 TG---603P TG---600P AY---103P DV---600P DVCL---153PD S---600P C---L wall mount Dimmers PHPM---PA PHPM---WBX 3 wire Main unit family HQRD---6NA RRD---6NA Apollo 80005 Dimming Method Reverse Phase Wattage 480W Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Reverse Phase Forward Phase Neutral Adaptive Phase Adaptive Forward Phase 400W Comments maximum load Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Dimmer requires a direct connection to neutral to ensure operation. Enforce Crestron Min level not only to avoid flicker, but to prevent initial flashing/disortion when ramping up the fixture output. Adjust low end trim Adjust low end trim 1.2Kw 600W 600W 600W 600W 600W 500W 600W 400W 300W 600W 600W 1000W 600W 600W 600W 600W 1920W 1920W 600W 600W 600W Lamp Base dimmer Adjust low end trim Adjust low and high end trim. 10W min load Adjust low and high end trim. Adjust low and high end trim. Set load to FP Adjust low and high end trim. Set load to FP Note: Most Forward Phase Dimmers have a minimum load requirement of 40---60 watts.A single 20 Watt LED lamp on a 600 W dimmer may flicker due to the minimum load requirement is not met. If the minimum dimmer load is not met, consider a synthetic minimum load, LUTRON--- LUT---LBX or other equivalent. This requires a 2 gang wall box and additional wiring to the dimmer. Depending on the quantity of LED lamps on the dimming circuit, an approximately 10%---100% dimming range may be obtainable. Most available dimmers were designed around older technology and resistive or incandescent lamp loads, therefore, performance can vary with LED load and is not guaranteed. Please see the manufactures instructions on dimmers for use with LED lamps and do not exceed the 150 Watt LED load for 600W rated dimmer. LED LAMP AND DIMMER COMPATIBILITY 5---29---13 LAMP: acculamp® A LAMPS AND CANDLE DIMMABLE VERSIONS Mfg Acuity Brands --- Sensor Leviton Leviton Leviton Leviton Leviton Leviton Leviton Lutron Lutron Lutron Lutron Lutron Lutron Lutron ELV Digital Fade Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron HomeWorks QS Lutron RadioRA2 Cat No. nLight NSP5 PCD ELV 120 6633---P 6681 IPIO6 6613---P 6631---LW 6161---I RPIO6---1 TG---603P AY---103P DV---600P DVCL---153PD TG---600P C---L wall mount Dimmers MRF2---6ELV PHPM---PA PHPM---WBX 3 wire Main unit family HQRD---6NA RRD---6NA Dimming Method Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Reverse Phase Reverse Phase Forward Phase Neutral Adaptive Phase Adaptive Wattage 480W 600W 600W 600W 600W 600W 500W 600W 600W 1000W 600W 600W 600W 600W 600W 1920W 1920W 600W 600W Comments maximum load Adjust low end trim Adjust low end trim Adjust low end trim. Set load type to reverse phase Adjust low and high end trim. Set load type to reverse phase. Adjust low and high end trim. Set load type to reverse phase. Adjust low end trim Adjust low and high end trim. Set load type to reverse phase. Adjust low end trim. Set load type to reverse phase Note: Most Forward Phase Dimmers have a minimum load requirement of 40---60 watts. A single 5 to 11 Watt LED lamp on a 600 W dimmer may flicker due to the minimum load requirement is not met. If the minimum dimmer load is not met, consider a synthetic minimum load, LUTRON--- LUT---LBX or other equivalent. This requires a 2 gang wall box and additional wiring to the dimmer. Depending on the quantity of LED lamps on the dimming circuit, an approximately 10%---100% dimming range may be obtainable. Most available dimmers were designed around older technology and resistive or incandescent lamp loads, therefore, performance can vary with LED load and is not guaranteed. Please see the manufactures instructions on dimmers for use with LED lamps and do not exceed the 150 Watt LED load for 600W rated dimmer. LED LAMP AND DIMMER COMPATIBILITY 5---29---13 LAMP: acculamp® ALEBR20 500L DIM, ALEBR30 850L DIM, ALEBR40 1045L DIM-DIMMABLE VERSIONS Mfg Acuity Brands---Sensor Switch Acuity Brands---Synergy Acuity Brands---Synergy Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron Crestron ETC ELV 1.2KW Leviton Universal---Decora Leviton Universal---Decora Leviton---Rotary Dial Leviton Leviton Leviton Leviton Leviton Leviton Leviton Leviton Lutron Lutron Lutron Lutron Lutron Maestro CL Lutron Diva CL Lutron Skylark CL Lutron Lutron Lutron RadioRA2 Lutron HomeWorks QS Lutron Graphic Eye QS Lutron Graphic Eye QS Lutron Graphic Eye QS Neptun Cat No. nLight NSP5 PCD 2W ISDELV400120WH SYPMB 6D Line voltage CLX---1DIM4 CLX---1DIM8 CLX---2DIM2 CLX---2DIM8 CLX---1DELV4 DIN---1DIM4 DIN---1DIMU4 CLW---DIMEX---E CLW---DIMEX---P CLW---DIMSWEX---E CLW---DIMSWEX---P P---DIMEX GLX---DIM6 GLXX---2DIM8 Paradigm Control Processor 6674P IPL06 6304 6633---P 6681 IPIO6 6613---P 6631---LW 6161---I RPIO6---1 IPE04---1LZ TG---603P TG---600P AY---103P C---L wall mount Dimmers MACL---153M DVCL---153PD CTCL---153P S---600P DV---600P RRD---6NA HQRD---6NA PHPM---PA PHPM---WBX 3 wire Main unit family Apollo 80005 Dimming Method Forward Phase ISDELV400120WH Forward Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Phase Adaptive Neutral Adaptive Reverse Phase Reverse Phase Forward Phase Forward Phase Wattage Comments 400W 1.2Kw 600W 600W 300W 600W 600W 600W 600W 600W 500W 600W 400W 600W 600W 1000W 600W 600W 600W 600W 600W 600W 600W 600W 1920W 1920W Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Dimmer requires a direct connection to neutral to ensure operation. Enforce Crestron Min level not only to avoid flicker, but to prevent initial flashing/disortion when ramping up the fixture output. Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Lamp Base dimmer Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low and high end trim. Set load to FP Adjust low and high end trim. Set load to FP Adjust low and high end trim. 10W min load Adjust low and high end trim. 600W Note: Most Forward Phase Dimmers have a minimum load requirement of 40---60 watts.A single 20 Watt LED lamp on a 600 W dimmer may flicker due to the minimum load requirement is not met. If the minimum dimmer load is not met, consider a synthetic minimum load, LUTRON--- LUT---LBX or other equivalent. This requires a 2 gang wall box and additional wiring to the dimmer. Depending on the quantity of LED lamps on the dimming circuit, an approximately 10%---100% dimming range may be obtainable. Most available dimmers were designed around older technology and resistive or incandescent lamp loads, therefore, performance can vary with LED load and is not guaranteed. Please see the manufactures instructions on dimmers for use with LED lamps and do not exceed the 150 Watt LED load for 600W rated dimmer. LED LAMP, DIMMER and TRANSFORMER COMPATIBILITY LAMP: acculamp® MR16 DIMMABLE VERSIONS Dimmer Cat No. Acuity Brands --Sensor Switch Leviton Universal--Decora Leviton Universal--Decora Lutron Maestro CL Lutron Diva CL Lutron Skylark CL nLight NSP5 PCD 2W 6674P Transformers Anchorn HATCH Keystone AETRS12KTET---75---1SCP---DIM--H050A --60M--RJS --LED ● 1, 2, ● 1, 2, ● 1, 2, Lightech Lightech LET 60 dimmable LET75 dimmable ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, MACL---153M ● 1, 2, DVCL---153PD ● 1, 2, CTCL---153P ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, ● 1, 2, IPL06 NOTES: 1) Optimal Performance---consider using dimmers compatible with LED Lamps and that feature a low end trim adjustment to help minimize flicker. Performance can vary with LED load and is not guaranteed or warrantied compatibility. A minimumfor load of 24 Watts may be required for improved performance and approximately 10%---100% dimming range. 2) Please see the manufacture's instructions on dimmers for use with LED lamps and do not exceed the 150 Watt LED load for 600W rated dimmer which allows for inrush current. 3) Other dimmers not listed above may have a minimum load requirement of 40---60 watts for incandescent loads only. And do not have a low end trim adjustment feature to minimize flicker and those dimmers may be not with electronic low voltage transformers and LEDmay loads. 4) Other lowcompatible voltage electronic transformers and dimmer combinations be compatible with LED lamps and are not guaranteed or warrantied for compatibility. LED LAMP AND DIMMER COMPATIBILITY LAMP: acculamp ALEMR16 GU10 DIM- DIMMABLE VERSIONS Item No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Mfg Cat No. Acuity BrandsLeviton UniversalLeviton UniversalLeviton-Rotary Dial Leviton Leviton Leviton Leviton Leviton Leviton Leviton Leviton Lutron Lutron Lutron Lutron Lutron Maestro CL Lutron Diva CL Lutron Skylark CL Lutron Lutron Lutron RadioRA2 Lutron HomeWorks Lutron Graphic Eye Lutron Graphic Eye Lutron Graphic Eye Neptun nLight NSP5 PCD 6674P IPL06 6304 6633-P 6681 IPIO6 6613-P 6631-LW 6161-I RPIO6-1 IPE04-1LZ TG-603P TG-600P AY-103P C-L wall mount MACL-153M DVCL-153PD CTCL-153P S-600P DV-600P RRD-6NA HQRD-6NA PHPM-PA PHPM-WBX 3 wire Main unit family Apollo 80005 Dimming Method Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Reverse Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Forward Phase Phase Adaptive Neutral Adaptive Reverse Phase Reverse Phase Forward Phase Forward Phase Wattage 600W 600W 300W 600W 600W 600W 600W 600W 500W 600W 400W 600W 600W 1000W 600W 600W 600W 600W 600W 600W 600W 600W 1920W 1920W Comments Adjust low end trim Adjust low end trim Lamp Base dimmer Adjust low end trim Adjust low end trim Adjust low end trim Adjust low end trim Adjust low and high end trim. Set load to FP Adjust low and high end trim. Set load to FP Adjust low and high end trim. 10W min load Adjust low and high end trim. 600W Note: Most Forward Phase Dimmers have a minimum load requirement of 40-60 watts. For Optimal Performance---consider using dimmers compatible with LED Lamps and that feature a low end trim adjustment to help minimize flicker. Performance can vary with LED load and is not guaranteed or warrantied for compatibility. A single 4 watt LED lamp on a 600 W dimmer may flicker due to the minimum load requirement is not met. If the minimum dimmer load is not met, consider a synthetic minimum load, LUTRON- LUT-LBX or other equivalent. This requires a 2 gang wall box and additional wiring to the dimmer. Depending on the quantity of LED lamps on the dimming circuit, an approximately 10%---100% dimming range may be obtainable. Also most dimmers available today were designed around older technology, resistive or incandescent lamp loads, so performance can vary with LED load and is not guaranteed. Please see the manufactures instructions on dimmers for use with LED lamps and do not exceed the 150 Watt LED load for 600W rated dimmer.