v2.0
Architectural Components Group
WALLS + CEILINGS
innovation
comes
standard
reativity specific pleasing dependabilit
ardy relaxing beautiful design systemat
mposure warmth contemporary genu
perience classy stylish crafted inspiratio
efined honest integrity versatility smar
adaptability accessibility rustic reliability
mplistic renewable elegance impressiv
olid ingenious secure inventive organi
ppealing focused stability customizatio
sourceful innovative passion uniquene
riking character vision strength trustin
rtistry sustainability natural efficient saf
ver modern authentic real craftsmansh
pertise skill devotion comforting effect
ty
tic
uine
onal
rt
y
ve
ic
on
ess
ng
fe
hip
tive
Linear Open, Series 1
Sagewood Retirement
Phoenix, Arizona, USA
WARMTH
Allegro™ Curved Panels
and Concerto Wall Panels
Farmington Hills City Hall
Farmington Hills, Michigan, USA
ELEGANCE
Linear Open, Series 3
Grinnell College
Grinnell, Iowa, USA
CHARACTER
v2.0
MICROPERF
• Wall and ceiling applications
• Various suspension methods
• Perforations not visible from
a few feet away
6
• Custom and standard sizes
• Various perforation patterns
• Degrees of acoustic treatment
Call (417) 869-6777 for questions and additional information.
MICROPERF
v2.0
ACGI MicroPerf panels blend the aesthetic qualities of
wood with excellent acoustical performance. Sound is
absorbed through a micro-perforated wood that has the
appearance of a non-perforated panel from a normal
viewing distance.
MicroPerf is an excellent solution for both wall and ceiling
applications, and can be applied to both flat and curved
panels. Acoustic fabric is factory-attached to the back
of the panel, and acoustic insulation is typically used for
additional NRC performance.
0.5 mm perforations spaced 2mm O.C. vertically and horizontally
(shown actual size)
Customize
For this product ACGI can source most commercially
available veneer or thermally-fused laminates and
apply any standard, color-matched or custom finish.
Our experienced team of engineers can modify
products to meet your project’s design requirements.
Contact us for details.
Non-Perforated Panel (top)
MicroPerf Panel (bottom)
Moses Cone Health System
Greensboro, North Carolina, USA
Visit acgiwood.com for more photos and details.
7
v2.0
Encore™ Acoustic Panels, Series 6
Peace Center for the Performing Arts
Greenville, South Carolina, USA
ENCORE™ ACOUSTIC PANELS
• Wall and ceiling applications
• Blend acoustics with aesthetics
• Groove and spacing options
8
• Accommodate linear planks, flat,
curved and large-format panels
• Simple installation process
Call (417) 869-6777 for questions and additional information.
ENCORE™ ACOUSTIC PANELS
v2.0
Encore™ acoustic panels combine superior acoustic
performance with the natural aesthetic quality of
wood. The system showcases our signature acoustic
treatment across a variety of products, including
planks, large-format, curved and custom panels for
both walls and ceilings.
Wall panels easily attach with our Concerto™ Wall
System or Z-clips, and various ceiling suspension
methods are available. For enhanced sound
absorption, encapsulated insulation, groove profiles
and spacing options are available.
Encore™ Acoustic Panels
Sioux Falls Medical Center
Sioux Falls, South Dakota, USA
alignment
clips
Series 1
Series 3
acoustic
face
acoustic
insulation
support
frame
Customize
ACGI can source any commercially available veneer
and apply any standard, color-matched or custom
finish. Laminates are also available. Our experienced
team of engineers can modify products to meet your
project’s design requirements. Contact us for details.
Visit acgiwood.com for more photos and details.
9
ENCORE™ ACOUSTIC PANELS
Encore™ Series 1 (EN1)
Series 1 acoustical wood planks provide a tongue and groove edge
and a monolithic appearance. Depending on the desired acoustical
performance, the backside of the plank is available with standard
holes, over-sized holes, counter-bored holes or no holes.
3⁄4”
Encore™ Series 2 (EN2)
Series 2 composite panels are manufactured from a series of components.
Face grooves are square and are cut through the face layer.
11⁄2”
Encore™ Series 3 (EN3)
Series 3 acoustical wood panels are a popular choice for composite
panels. The grooves can be either continuous to the end of the panel,
stopped to create an integral border, or the panel can be constructed
with a mitered perimeter frame. EN3 is also available in a radiused,
factory-curved panel with a minimum radius of 8’.
11⁄2”
Encore™ Series 4 (EN4)
Series 4 acoustical wood panels have routed face grooves with
integral border and intersecting back perforations.
3⁄4”
Encore™ Series 5 (EN5)
EN5 is the curved version of EN6. These acoustical wood
panels combine curved panel design and sound absorption.
EN5 panels can be factory curved to match design criteria of
convex, concave or serpentine shaped panels in custom sizes
and radii.
3” trim typical
Encore™ Series 6 (EN6)
Series 6 acoustical wood panels incorporate multiple ceiling
and wall applications. EN6 is the panelized version of EN1
planks. EN6 panels are typically ¾” thick and edge banded.
3⁄4”
3⁄4”
3⁄4”
Visit acgiwood.com for more photos and details.
Encore™ Series 7 (EN7)
Series 7 acoustical wood planks or panels incorporate
various groove sizes and spacing with intermittent, parallel,
intersecting saw penetrations on the backside of the face to
absorb sound.
Encore™ Series 8 (EN8)
Series 8 is a specialty face-grooved panel with a thin face
membrane for multiple applications such as sound absorption,
airflow or speaker covers – all with the same visual face.
v2.0
Flat Panel Suspension Series 6
Exeter School Multi-Purpose Space
Exeter, Missouri, USA
FLAT PANEL SUSPENSIONS
• Various suspension methods
• Wall and ceiling applications
• Degrees of acoustic treatment
10
• Custom and standard sizes
• Various perforation patterns
Call (417) 869-6777 for questions and additional information.
FLAT PANEL SUSPENSIONS
v2.0
ACGI Flat Panels are designed for wall and ceiling
applications and are available in custom and standard
sizes. Acoustical options range from grooves and slots
to perforations and MicroPerf patterns.
Acoustical fabric is typically added to the back of
perforated panels. Special surface images (such as
patterns and logos) can also be incorporated into the
manufacturing.
Z-clips
Flat Panel, Suspension Series 1
Patewood Memorial Hospital
Greer, South Carolina, USA
Flat Panel, Suspension Series 5
Morehouse College
Atlanta, Georgia, USA
Customize
ACGI can source any commercially available veneer
and apply any standard, color-matched or custom
finish. Laminates are also available. Our experienced
team of engineers can modify products to meet your
project’s design requirements. Contact us for details.
Visit acgiwood.com for more photos and details.
11
FLAT PANEL SUSPENSIONS
Suspension Series 1 (SS1)
3⁄4”
3⁄4”
Series 1 is typically used in wall applications and attached with
Z-Clips (see drawing in middle column). In ceiling applications SS1
panels lay into a standard T-Grid and are easily removed for access.
Suspension Series 2 (SS2)
Series 2 has a reveal edge condition that lays into a standard
T-Grid. The grid can be covered with optional matching wood
trim. The panels are easily removed for access.
Suspension Series 3 (SS3)
3⁄4”
Series 3 is designed to slide into the grid and provide a 3⁄8”
reveal between each panel. The panels are easily removed for
access.
Suspension Series 4 (SS4)
Series 4 suspends from backers that slide over the grid and
provide a 3⁄8” reveal between each panel. The panels are easily
removed for access.
3⁄4”
Suspension Series 5 (SS5)
3⁄4”
Series 5 is designed for large format panels that suspend from
a cold rolled steel channel or HD T-Grid. Panels can be easily
installed and removed or locked into place.
Suspension Series 6 (SS6)
3” trim
Series 6 is designed for large format panels that suspend from
Unistrut for incline applications. Special mounting brackets
accommodate different angle configurations.
Suspension Series 7 (SS7)
3⁄4”
Visit acgiwood.com for more photos and details.
Series 7 uses a torsion spring suspension system mounted to
the back of the panel along with a custom T-Grid system. This
system enables the panel to be fully or partially removed to
facilitate access to the space above the ceiling.
Concerto™ Wall System
First Presbyterian Church
Tulsa, Oklahoma, USA
CONCERTO™ WALL SYSTEM
• Create a unique appearance
• Panels slide securely into place
• Options for extrusions, moldings, • Incorporate access panels
finishes, doors, and movable
• Perfect with ACGI Flat Panels partitions
and Encore™ Acoustic Panels
12
Call (417) 869-6777 for questions and additional information.
v2.0
CONCERTO™ WALL SYSTEM
v2.0
The Concerto™ Wall System features various
interchangeable aluminum extrusions with an
assortment of reveal conditions. Ideal for creating a
unique, consistent style, the system supports ACGI’s
perforated and non-perforated panels, including
MicroPerf and Encore™ Acoustic Panels. The simplicity
and flexibility makes standard, flat, curved and custom
panels possible.
Concerto™ Wall System
First Presbyterian Church
Tulsa, Oklahoma, USA
Customize
Custom extrusions are available. Contact us for details.
extrusion
extrusion
Extrusion Style Examples
Concerto™ Wall System
John Burroughs School Theatre
St. Louis, Missouri, USA
Visit acgiwood.com for more photos and details.
13
CONCERTO™ WALL SYSTEM
Concerto™ Wall 100 (CW1)
Series 100 includes a variety of extrusions that provides a
recessed reveal. A variety of trim options are also available.
3⁄4”
Concerto™ Wall 200 (CW2)
Series 200 extrusions extend to the face of the wall panel
resulting in a framed panel system.
3⁄4”
Concerto™ Wall 300 (CW3)
Series 300 extrusions also cover the edges of the panel but
create a much shallower reveal for added emphasis to the
extrusion.
3⁄4”
Concerto™ Wall 400 (CW4)
Series 400 are used on thinner architectural panels, but may be
used with a variety of panel types. The extrusions are used in
conjunction with a Z-Clip mounting system that allows for easy
removal of panels for access. The resulting reveal is recessed to
the depth of the panel thickness.
3⁄4”
Concerto™ Wall 500 (CW5)
Series 500 adds captured panel perimeter extensions.
3⁄4”
Visit acgiwood.com for more photos and details.
v2.0
Allegro™ Curved Panels, Series 1
Laurel High School
Laurel, Maryland, USA
ALLEGRO™ CURVED PANELS
• Perfect for multi-panel ceiling
• Wall and ceiling applications
cloud applications
• Concave, convex and serpentine
• Complements other ACGI ceiling • Perimeter trim and acoustic
insulation options
and wall systems
14
Call (417) 869-6777 for questions and additional information.
ALLEGRO™ CURVED PANELS
v2.0
Allegro™ Curved Panels are pre-engineered and prefinished to meet acoustic and aesthetic requirements.
Their design redirects sound waves and enhances
the acoustics of large open spaces (i.e. auditoriums,
theaters, performance halls and lecture rooms).
As these panels are designed to reflect, rather than
absorb sound, the faces are non-perforated. Applying
sound absorbing material to the panel backs will
absorb non-directed sound within the plenum. With
a six-inch minimum radius, these large-format panels
can be concave, convex and serpentine shaped.
Ceiling Cloud
Wall Application
Allegro™ Curved Panels
Methodist Women’s Hospital
Omaha, Nebraska, USA
Allegro™ Curved Panels
St. Paul’s Monastery: Chapel
Maplewood, Minnesota, USA
Unistrut®
attached with
Z-clips
Customize
For this product ACGI can source any commercially
available veneer and apply any standard, color-matched
or custom finish. Laminates are also available. Our
experienced team of engineers can modify products
to meet your project’s design requirements.
Contact us for details.
Visit acgiwood.com for more photos and details.
15
ALLEGRO™ CURVED PANELS
Allegro™ Series 1 (AL1)
Series 1 is a ¾” thick curved panel that is simple and
economical.
Allegro™ Series 2 (AL2)
Series 2 is similar to Series 1 adding an integral 3” vertical
perimeter trim.
Allegro™ Series 3 (AL3)
Series 3 is a custom composite panel with a thickness greater
than ¾”. The panel can be filled with acoustical material
or designed with a variety of substrates to meet specific
requirements.
Visit acgiwood.com for more photos and details.
v2.0
Linear Open, Series 3 Ceiling
Grinnell College
Grinnell, Iowa, USA
LINEAR
• Wall and ceiling applications
• Planks and panels
• Closed and open reveals
• Reveal profile options
16
• Optional fiber-felt reveal strips
• Squared or rounded backers
• Solid wood, veneer or laminate
Call (417) 869-6777 for questions and additional information.
LINEAR
v2.0
ACGI Linear is designed to provide a continuous plank
appearance and features either individual planks
or panelized segments. Both include custom and
standard reveal profiles for both open and closed
reveals while delivering a streamlined installation
process.
Open reveal planks allow sound waves to pass
between members into the plenum. The NRC
performance is controlled by layers of acoustic
insulation. Closed reveal systems diffuse sound waves.
Linear Open, Series 2
Dewey Short Visitor Center
Branson, Missouri, USA
side clips
Linear planks
(closed reveal)
wood backers
Linear panels
(open reveal)
Customize
ACGI can source any commercially available veneer
and apply any standard, color-matched or custom
finish. Laminates are also available. Our experienced
team of engineers can modify products to meet your
project’s design requirements. Contact us for details.
Linear Open, Series 3
Winnipeg International Airport
Winnipeg, Manitoba, Canada
Visit acgiwood.com for more photos and details.
17
LINEAR
Linear Open Series 1 (LO1)
LO1 is an individual plank system installed progressively with
our LSC-102 clip. Planks are butted end to end using LSC-103
alignment clips. This provides a more continuous appearance
along the length of the ceiling. The reveals in this system
are open to the plenum above. The system’s clips are black
for concealment against black T-Grid. Although installed
progressively, this series is completely accessible by removing
two adjacent planks.
Linear Open Series 2 (LO2)
LO2 is similar to LO1 series except that it includes factory
installed black felt in the reveal. This system offers visual
concealment of the plenum while still providing acoustical
performance.
Linear Open Series 3 (LO3)
LO3 offers a faster and more economical installation. Typical
panels are 12” wide with ¾” typical reveal between planks. The
panels are typically installed with ¾” reveals between the ends
of the panels to match the reveals between the planks. Panels
are factory assembled using flat black wood backers, and are
installed by screwing through the backers, between the planks,
into the T-Grid. Although this system is accessible, optional
suspension methods are available for frequent access.
Linear Open Series 4 (LO4)
LO4 is panelized similar to the LO3, but the backers in this system
have a rounded edge that protrudes into the plank reveal. This
provides a look similar to a wood dowel, and suspends with a DC101 dowel clip.
Linear Open Series 5 (LO5)
The LO5 is another panelized Linear Open Series similar to the
LO3. However, LO5 panels “lay into” HD T-grid and do not usually
require screws or clips. Panels are available as nominal 2’ wide by
2’ or 4’ length. Panels are factory assembled using flat black wood
backers. The reveal size at the panel edge matches the size of the
grid, either 9/16” or 15/16.” Like most of our other systems, the LO5
panels are accessible.
Linear Closed Series 1 (LC1)
LC1 has a tongue and groove edge for a continuous plank
ceiling. Planks are installed using concealed LSC-101 clips. There
are a variety of details available for the joint reveal including
custom. LC1 planks are typically manufactured from solid wood;
but veneered material may be used as well (core of veneered
material may be visible depending on reveal profile). LC1 planks
are typically ¾” thick, however other thicknesses are available.
Plank width and length can vary depending on wood species.
Visit acgiwood.com for more photos and details.
v2.0
Grille Wood Backer, Series 1
The Frontier Project
Rancho Cucamonga, California, USA
GRILLES
• Wall and ceiling applications
• Panelized for easy installation
• Squared or rounded backers
18
• Optional notched backers
• Solid wood and flexible dowels
• Sophisticated Micro-Grilles
Call (417) 869-6777 for questions and additional information.
GRILLES
v2.0
ACGI Grilles offer the warmth of natural wood with
excellent acoustical performance. The open design
allows sound to pass unobstructed into the plenum
or to be absorbed by insulation. Panels feature either
wood backers or dowels that are painted flat black
(other finishes available).
Grilles are characterized by blades that are less than
3½” deep and assembled with four to ten members
per foot. For ceiling applications, panels easily screw
to standard grid or attach with quick-release dowel
clips. To meet seismic requirements, dowel clips are
designed with holes for field-installed wire.
Grille Dowel, Series 1
Owensboro Medical Health System
Owensboro, Kentucky, USA
wood backers
screw into grid
(notched backers
are optional)
wood dowels
(flexible available)
quick-release
dowel clips
attach to grid
Customize
For this product ACGI can source any commercially
available solid wood or veneer apply any standard,
color-matched or custom finish. Our experienced
team of engineers can modify products to meet your
project’s design requirements. Contact us for details.
Visit acgiwood.com for more photos and details.
19
GRILLES
3⁄4”
3⁄4”
Grille Dowel Series 1 (GD1)
The Series 1 Grille is panelized and assembled with wood
dowels at 12” O.C. Dowels are typically painted flat black, but
are available in other colors. Series 1 Grilles are installed to
ceiling grid using DC-101 suspension clips. The clips are easily
removed for plenum access. The clips are designed with holes
to allow field installed wire to meet seismic requirements.
These Grilles can be used for wall applications as well,
depending on the blade size, using our DC-102 wall clip.
Grille Wood Back Series 1 (GB1)
Our GB1 Grille is panelized using a solid wood backer at
12” O.C. The backers are typically painted flat black, but are
available in other colors. When the blade height is greater
than 2”, or for wall applications, the backer is notched to
provide extra strength and stability. GB1 panels are installed by
screwing through the backers to the grid or wall furring strips.
For occasional ceiling access, the attachment screws can be
removed, or optional suspension can be provided if regular
access is required.
Grille Rounded Wood Back Series 2 (GB2)
GB2 uses a wood backer that has a radiused face shaped to
resemble a wood dowel. Viewed from below it looks like a
dowel but has the added strength of a notched wood backer
strip. It also uses the quick release DC-101 dowel clip, and other
features are similar to the wood back system.
3⁄4”
Grille Rounded Wood Back Series 3 (GB3)
GB3 panels are similar to GB1, however GB3 panels “lay into”
HD T-grid and do not usually require screws or clips. The GB3
Grille is panelized using a solid wood backer at 12” O.C. The
backers are typically painted flat black, but are available in
other colors. The blade depth is typically 1-1/2,” and panels are
nominal 2’ wide by 2’ or 4’ length. The reveal size at the panel
edge matches the size of the 15/16” grid. Like most of our other
systems, the GB3 panels are accessible.
3⁄16”
1⁄4”
Visit acgiwood.com for more photos and details.
Micro-Grille Series 1 (MG1)
Micro-Grille is a product that works well for ceilings, walls and
areas where air flow is required. They offer a blade thickness of
3/16” and a depth of 1” and the blades are placed on a notched
wood backer.
Micro-Grille Series 2 (MG2)
Similar to Micro-Grille Series 1, Micro-Grille Series 2 can also be
constructed as an encapsulated panel adding acoustic value
and making installation even simpler.
v2.0
Baffles, Series 1
The Melar, Upper West Side Manhattan
New York, New York, USA
BAFFLES
• Wall and ceiling applications
• Squared and rounded profiles
• Notched backers
20
• Curvilinear blades and backers
• Substrates: particle board, MDF,
fire-rated foam, laminate and
solid wood
Call (417) 869-6777 for questions and additional information.
BAFFLES
v2.0
Baffles are a larger format than Grilles and offer
versatility and durability. Depending on size and
design requirements, they can be produced from solid
wood or veneer on MDF, particle board or fire-rated
foam substrates.
Panel options include size, thickness, spacing,
members per foot and custom profiles. For a
curvilinear style, we can produce radiused backers or
radiused baffles.
Custom Baffles
Edmonton International Airport
Edmonton, Alberta, Canada
main runner
24” O.C.
WB1 panel
radiused
backers
backers overlap for
seamless look
Customize
For this product ACGI can source any commercially
available veneer and apply any standard, color-matched
or custom finish. Laminates are also available. Our
experienced team of engineers can modify products
to meet your project’s design requirements. Contact us
for details.
Custom Baffles
First Baptist Church
Kimberling City, Missouri, USA
Visit acgiwood.com for more photos and details.
21
BAFFLES
Wood Baffle-Profile (WB1, WB2)
There are two standard profiles (Series 1 & 2) as well as custom
profiles to choose from. Series 1 has flat sides. Series 2 is similar
to Series 1 except that the baffles have a radiused bottom face.
Each profile has several size options and the number of baffles
can vary depending on design criteria.
3⁄4”
3⁄4”
Wood Baffle-Radius (WB3, WB4)
Wood baffles are available with either the backer strip or the
baffle itself radiused as indicated by the design details in this
section. Individual baffles can also have various radius profiles
to create a flowing compound appearance. Please contact
ACGI or your ACGI Sales representative to discuss special
project needs for this type of application.
Tremolo™ Baffle (TB)
Tremolo™ has a tapered wood baffle and each member can be
suspended individually with or without an integral light fixture.
Visit acgiwood.com for more photos and details.
Custom Beams
First Presbyterian Church
Tulsa, Oklahoma, USA
v2.0
BEAMS
• Wall and ceiling applications
• Fully integrated system
• Simplistic installation
22
• Squared, rounded, half-rounded
and curvilinear shapes
• Create unique, custom styles
Call (417) 869-6777 for questions and additional information.
BEAMS
v2.0
Custom Curved Beams
Marriott Beach Resort
Marco Island, Florida, USA
ACGI Beams make a statement. They not only give
visual grandeur but also provide efficient production
and installation methods. The design of this highly
customizable system fully integrates rectangular
or round profiles with horizontal and vertical radii
options allowing an array of configurations for both
walls and ceilings.
Beams can be finished on all sides and manufactured
with various matching, decorative moldings,
including custom and elaborate designs.
alignment block
threaded
rod 48” O.C.
Custom Beams
New Jersey Law Center
New Brunswick, New Jersey, USA
trim
supplied by ACGI
support gusset for trim
main beam
Customize
For this product ACGI can source any commercially
available veneer and apply any standard, color-matched
or custom finish. Laminates are also available. Our
experienced team of engineers can modify products
to meet your project’s design requirements. Contact us
for details.
Visit acgiwood.com for more photos and details.
23
BEAMS
Beam Series 1 (BM1)
Series 1 beams can be square, rectangular, or rounded. They also
include half beams for wall applications. Simple moldings can
be attached almost anywhere to the beam. This series is simple
to install and field modify. Custom sizes, veneer selection and
finishes available.
Beam Series 2 (BM2)
Series 2 is designed to be used with elaborate decorative
moldings. Unless the architect or designer has a specific design
it is recommended they confer with ACGI direct to work out the
exact design needed. ACGI can provide a variety of assistance
to identify different molding types that can effectively be used
together.
Beam Series 3 (BM3)
The internal design of Series 3 beams allows for very exact
dimensions and smooth surfaces. Different radii are available
upon request.
Beam Series 4 (BM4)
Series 4 are vertical radius beams. Different radii are available as
well as radius four sided beams for internal beam structures.
Visit acgiwood.com for more photos and details.
v2.0
Custom Cube
Quinnipiac University Health Professions Center
New Haven, Connecticut, USA
CUBES
• Rectangular and round shapes
• Continuous and modular styles
24
• Custom wood grid options
• Custom and standard panels
Call (417) 869-6777 for questions and additional information.
CUBES
v2.0
ACGI Cubes feature rectangular and round panels
with either a continuous or modular appearance.
Continuous Cubes include a custom constructed
wood grid with “lap” joints; whereas, Modular Cubes
lay into standard ceiling grid. The systems permit
variations in cell size, thickness and depth.
Depending on project requirements, panels
can be factory or field-cut to size. Both standard
and custom panels (including large, multi-piece
structures) are available.
Continuous Cubes
(wood grid)
standard
ceiling grid
Modular Cubes
(recessed)
Customize
For this product ACGI can source any commercially
available solid wood and apply any standard, colormatched or custom finish. Our experienced team
of engineers can modify products to meet design
requirements. Contact us for details.
Visit acgiwood.com for more photos and details.
25
CUBES
Cube­–Continuous
Continuous cube systems utilize panels in either
2’ x 2’, 2’ x 4’ or 4’ x 4’ configurations that lay into one of three
grid systems. They produce a continuous cube appearance
over the entire ceiling area.
Cube–Continuous Series 1 (CC1)
Uses a wood grid where panels connect via a “lap” joint.
Cube­–Continuous Series 2 (CC2)
Uses a 3⁄8” wood grid and the panels lay into the grid via a
metal bracket. Perimeter conditions may use reveals placed
between the panels and the structure. However, if cubes
are used in an island or floating type configurations, special
vertical wood trim can be used around the perimeter in either
a radius or straight profile. The trim is available in matching or
complementary wood species and finishes.
Cube–Modular
Modular cube systems are made to lay into a HD T-Grid.
Depending on the series selected they can be placed into
the grid or recessed to hang below the grid. Instead of a
continuous cube appearance, modular systems provide a
distinctive reveal between each panel. ACGI provides three
different systems for the specifier to choose from.
Cube–Modular Series 1 (CM1)
Lay-in panel with perimeter sides.
Cube–Modular Series 2 (CM2)
Panel is recessed below the 15⁄16” grid.
Cube–Oval or Round
These panels come as smaller single piece units or larger multipiece structures that are joined with dowels. Once joined the
panels appear to be one solid unit.
Cube–Oval (CO1)
Oval panel with perimeter sides.
Cube–Round (CR2)
Round panel with perimeter sides.
Visit acgiwood.com for more photos and details.
v2.0
COFFERS
• Lay-in ceiling grid suspension
• Floating ceiling applications
26
• Simple to install and remove
• Custom and standard profiles
Call (417) 869-6777 for questions and additional information.
COFFERS
v2.0
ACGI Coffers give ceilings a classy touch. We offer
standard and custom profiles with an intuitive lay-in
suspension. Panels either lay flush with the ceiling
grid or hang recessed below the grid. Both methods
easily accommodate post-installation access. Factory
cut-outs are also available.
We offer a variety of designs to meet specific project
requirements, including matching or complementary
trim for “floating ceiling” applications.
ACGI safety clips
standard profiles
Customize
For this product ACGI can source any commercially
available veneer and apply any standard, color-matched
or custom finish. Laminates are also available. Our
experienced team of engineers can modify products
to meet your project’s design requirements. Contact us
for details.
Visit acgiwood.com for more photos and details.
27
COFFERS
Coffer Series 1 (CF1)
Coffer Series 1 panels suspend from a backer board below
the grid. The profile of the molding determines the overall
depth of the panel. This series is especially useful when there is
insufficient space above the ceiling due to HVAC equipment or
other electrical apparatus.
When suspended, Coffer Series 1 panels typically have a small
reveal between each panel. They are accessible and can be
field-cut to allow for lighting or sprinkler heads.
Coffer Series 2 (CF2)
Coffer Series 2 panels are designed so the molding portion of
the panel lays into and is supported by the HD T-Grid.
Visit acgiwood.com for more photos and details.
v2.0
Custom Louvers
Health Care REIT
Toledo, Ohio, USA
LOUVERS
• Custom and standard profiles
• Wall and ceiling applications
• Spacing and angle options
• Open or encapsulated panels
with optional acoustic insulation
28
Call (417) 869-6777 for questions and additional information.
LOUVERS
v2.0
ACGI Louvers feature custom and standard blade
profiles available in either open or encapsulated
designs. The open design easily accommodates HVAC
applications. Panels are available in custom sizes.
Wall mounts can be fixed or utilize Z-clips, and
ceiling panels suspend from ACGI’s system-specific
suspension.
Custom Louvers
Health Care REIT
Toledo, Ohio, USA
ceiling panel
application
wall
application
optional
encapsulated
acoustic
insulation
blade
profiles
Customize
For this product ACGI can source any commercially
available veneer and apply any standard, color-matched
or custom finish. Laminates are also available. Our
experienced team of engineers can modify products
to meet your project’s design requirements. Contact us
for details.
Custom Louvers
Health Care REIT
Toledo, Ohio, USA
Visit acgiwood.com for more photos and details.
29
LOUVERS
Louver Series 1 (LV1)
LV1 is a standard louver that can be attached to walls utilizing
a fixed mount or as a ceiling application using an FP2 lay-in
suspension system.
45°
Varies
Varies
Varies
Wood Base
Louver Series 2 (LV2)
LV2 is encapsulated with acoustical insulation. It can be wall
mounted using Z-Clips or ceiling mounted using an FP2 lay-in
suspension system.
1” Layer of
Encapsulated
Acoustical
Insulation
1⁄4”
Z-Clip
for Wall
Application
Visit acgiwood.com for more photos and details.
v2.0
Counterpoint Diffuser Panels and Concerto Wall Panels
Winnipeg International Airport
Winnipeg, Manitoba, Canada
DIFFUSER ACOUSTIC PANELS
• Wall and ceiling applications
• Diminish flutter and echo
• Custom and standard designs
30
• Substrates: solid wood, veneer
and thermally-fused laminate
Call (417) 869-6777 for questions and additional information.
DIFFUSER ACOUSTIC PANELS
v2.0
Diffuser acoustic panels provide custom acoustic
solutions for walls and ceilings. Although often used
sparingly, they effectively diminish an environment’s
flutter and echo.
ACGI offers several standard designs and our
experienced team of engineers can create a custom
design to meet your project’s acoustic requirements.
Contact us for details.
Counterpoint
Toccata
Customize
For this product ACGI can source any commercially
available veneer and apply any standard, color-matched
or custom finish. Laminates are also available. Our
experienced team of engineers can modify products
to meet your project’s design requirements. Contact us
for details.
Toccata Diffuser Panels
John Burroughs School Theatre
St. Louis, Missouri, USA
Visit acgiwood.com for more photos and details.
31
DIFFUSER ACOUSTIC PANELS
Toccata (DF1)
Tocatta is a monolithic plank with various channel widths and
depths that break up and redistribute sound waves. Planks are
manufactured with specified specie and custom factory finish
to match or complement surrounding surfaces. Toccata planks
are easily trimmed in the field.
Counterpoint (DF2)
Counterpoint is a custom geometric panel that focuses sound
direction to isolate echo and reverberation. Panels are installed
in horizontal or vertical bands on walls or ceilings. The face can
be wood veneer, high-pressure laminate or paint.
Rubato (DF3)
Rubato panels feature a decorative sculpted face that results
in superior sound diffusion. The face pattern can be a custom
design that blends with adjacent panels or is distinctive. Wall
or column applications are most common, but panels can also
be used for ceilings. Because of unique pattern undulations
the face is typically painted or coated rather than covered in
wood veneer.
Visit acgiwood.com for more photos and details.
CUSTOM PROJECTS
Custom Linear Panels
Muriel Kauffman Theatre
Kansas City, Missouri, USA
ACGI’s custom capabilities set us apart from the competition. When it comes to unique projects,
our talented, experienced team of engineers takes pride in designing the best solution.
Custom Flat and Allegro™ Curved Panels
The Howard Theatre
Washington, D.C., USA
32
Call (417) 869-6777 for questions and additional information.
v2.0
CUSTOM PROJECTS
v2.0
Custom Faceted Wall
National Nuclear Security Administration
Kansas City, Missouri, USA
Our goal is to bring your architectural vision to a tangible reality. We achieve that goal by
delivering a product that is not only economical and efficient but also strikingly beautiful.
Custom Angled Wall
Mark Center Building (BRAC-133)
Alexandria, Virginia, USA
Visit acgiwood.com for more photos and details.
33
CUSTOM PROJECTS
v2.0
What color do you want?
Custom Stains
In addition to our standard stain collection, ACGI can create or match any color to
meet your project’s requirements. Our experienced finishing department is skilled
at custom tinting and matching. Contact us for more details.
Lighting Factors
Keep the final viewing area in mind. The environment’s light source will impact
how our color matches existing finishes. When submitting a specific color match,
please indicate the installation site’s lighting source (e.g. natural daylight, cool
white fluorescent, warm white fluorescent, incandescent, ultraviolet). Our finishing
department develops each custom color according to the original light source prior
to sending a sample for approval.
What species would you like?
Specify Your Species
ACGI will source any commercially available solid wood or veneer.
FSC Certified
Although many species are available with FSC certification, additional lead time is
required to accumulate solid wood in upper grades and is subject to prior sale to
other industries. Veneer species are more readily available in FSC certified flitches.
LEED® Credits
With our complete in-house manufacturing capabilities, ACGI offers LEED®
compliant materials, designs and processes to accommodate your project’s credit
requirements. ACGI will also supply appropriate LEED® qualification documentation
and certification after the product is delivered and installed.
34
Call (417) 869-6777 for questions and additional information.
OUR PRODUCTS
OUR MISSION
OUR HISTORY
ACGI manufactures various
We commit to providing
Founded in January 2001 by
wall and ceiling systems
the highest quality product
its president, Gary Thompson,
with many projects requiring
possible through our highly
ACGI has become a leader
custom designs. Our
skilled and dedicated
in the walls and ceilings
collection of interchangeable
personnel. Our intent is to
industry. We have strategically
systems lets you achieve
provide innovation, quality
positioned ourselves through
the perfect aesthetic and
and customer service
innovative products, ethical
acoustic results.
unsurpassed in our industry.
business practices and an
We strive to conduct ourselves
accessible management team.
in a positive manner that sets
ACGI has an extensive
us apart from our competition.
network of independent
We recognize the guidance
representatives throughout
and direction of God in our
the United States and abroad.
business and will always be
We proudly manufacture all of
thankful for the opportunities
our wood walls and ceilings in
He provides to us.
Marshfield, Missouri, USA.
PRODUCT LINES
Allegro™ Curved Panels
Baffles
Beams
Coffers
Concerto™ Wall System
Cubes
Diffuser Acoustic Panels
Encore™ Acoustic Panels
Flat Panels
Grilles
Linear
Louvers
MicroPerf
acgiwood.com
v2.0
Allegro™ Curved Panels
and Concerto Wall Panels
Farmington Hills City Hall
Farmington Hills, Michigan, USA
Architectural Components Group, Inc.
521 George St. Marshfield, MO 65706
(417) 869-6777 · (417) 869-7888 Fax
acgiwood.com
© 2013 Architectural
Components Group, Inc.
All Rights Reserved.
Information accurate at time
of printing. Product and
material information subject
to change without notice.
Product applications are suggestion only. Always conform
to local building codes and safety conditions. ACGI does not
accept responsibility for misuse or improper installation
of products. Printed on recycled paper from certified
sustainable production systems. Made in U.S.A.