Traditional Concrete Bollard - Architectural Area Lighting

advertisement
Traditional Concrete Bollard
TYPE
•
Available with highly efficient LED ring technology
- Type 5 distribution pattern
•
Body and caps are composed of precast concrete reinforced
with an internal cage structure of steel
- Warm white (3500K) or bright white (5100K)
•
Grills are cast aluminum with stainless steel hardware
•
Round, square, or pedestal models available
•
Inner lens is sealed to the grill frame
•
Three grill design options to address application
requirements
•
Color of grills available in 13 standard colors with a polymer
primer sealer
1. LUMINAIRE
2. LAMP/BALLAST
3. COLOR
1.
LUMINAIRE
ROUND PEDESTAL (Wt: 46 lbs)
TPR-OL (Opal acrylic lens
TPR-DC (Decorative cast grill, opal acrylic lens )
TPR-VR (Vandal resistant cast grill, opal acrylic lens )
SQUARE PEDESTAL (Wt: 46 lbs)
TPS-OL (Opal acrylic lens )
TPS-DC (Decorative cast grill, opal acrylic lens)
TPS-VR (Vandal resistant cast grill, opal acrylic lens)
ROUND BOLLARD (Wt: 323 lbs)
TRD-OL (Opal acrylic lens - Wt: 323 lbs)
TRD-DC (Decorative cast grill, opal acrylic lens)
TRD-VR (Vandal resistant cast grill, opal acrylic lens)
TRD-UN (Unlit bollard with no cast grill section- Wt: 309 lbs
SQUARE BOLLARD (Wt: 271lbs)
TSQ-OL (Opal acrylic lens)
TSQ-DC (Decorative cast grill, opal acrylic lens)
TSQ-VR (Vandal resistant cast grill, opal acrylic lens)
TSQ-UN (Unlit bollard with no cast grill section- Wt: 257 lbs)
2. LAMP/BALLAST
TRD-DC
4. OPTIONS
3. COLOR
SPECIFICATIONS
WH Arctic White
BL Black
BLT Matte Black
DB Dark Bronze
DGN Dark Green
TT Titanium
WDB Weathered Bronze
MDB Bronze Metallic
CONCRETE BODY AND CAP
The body and caps are composed of precast
concrete ­reinforced with an internal cage structure
of steel. The concrete bodies are one-piece
castings with a minimum wall thickness of 2
1/4". All threaded inserts are welded to the steel
reinforcing cage and cast in place. The base
plate for anchoring is 1/4" hot dipped galvanized
steel. Bollards are not rated for traffic barrier
application.
VBU Verde Blue
CRT Corten
MAL Matte Aluminum
MG Medium Grey
AGN Antique Green
LG Light Grey
RAL Premium Color
CUSTOM * * Contact Factory
4.OPTIONS
90S (90 degree shield, field installed)
180S (180 degree shield, field installed)
QRS (Quartz restrike controller and socket for a T4 mini-can halogen
lamp, HID version only. QRS lamp wattage not to exceed primary
lamp wattage. Not available with induction or LED)
QL (Socket for a T4 mini-can halogen lamp must be field wired to a
separate 120 volt, HID version only. QL lamp wattage not to exceed
primary lamp wattage. Not available with induction or LED)
347 (120/277/347 volt HID ballast for 70MH, 100MH, 70HPS and
100HPS only. 347 volt for 50MH and 50HPS only. Not available
with LED)
LED (36 light emitting diode array (37 watts). Warm white (3000K),
Neutral white (4000K), Bright white (5000K). Type 5. 120 thru 277 volt.)
36LED-WW (Warm white)
36LED-NW (Neutral white)
36LED-BW (Bright white)
COMPACT FLUORESCENT (120 thru 277 volt)
Use 4-pin 26, 32, or 42 watt lamp. Specify wattage
CF (-18o C starting temp)
METAL HALIDE (120/208/240/277 volt ballast)
Medium base, ED-17 lamp
50MH
70MH100MH
G12 base, T-6 ceramic lamp
70MHT6 HIGH PRESSURE SODIUM (120/208/240/277 volt ballast)
Medium base, ED-17 lamp
50HPS
70HPS100HPS
Lamps not included (except LED options). All fixtures prewired for 277
volts, unless specified. GRILL
Grills are cast aluminum, minimum wall thickness
of .250". All castings are pure aluminum #356
alloy, free of any foreign material or porosity.
Grills have cast-in-place, integral mounting lugs
for attachment to the concrete base. The lens
is one-piece, seamless opal acrylic. Lens is
lightly sandblasted when LED option is chosen.
The lens is sealed at both ends with a molded
silicone gasket. The grill assembly is sealed to
the concrete with a silicone compression gasket
on the top and bottom for weather tight operation.
Recessed stainless steel screws are loosened to
remove the top cap for relamping.
FINISH
Standard concrete color is Lehigh white with
a light sandblast finish. No custom color is
available.
Grill finish consists of a five stage pretreatment
regimen with a polymer primer sealer, oven dry
off and top coated with a thermoset super TGIC
polyester powder coat finish. The finish shall meet
the AAMA 605.2 performance specification which
includes passing a 3000 hour salt spray test for
corrosion resistance.
ELECTRICAL MODULE
The electrical module consists of the ballast
module and lamp housing. All housing parts
are aluminum with stainless steel hardware. The
ballast module is prewired on an aluminum strap
mounted to the underside of the lamp housing.
The electrical module is silicone gasketed for
weather tight operation. The pedestal version(s)
shall include an aluminum ballast enclosure for
use in a field constructed base. HID ballasts
are high power factor, rated for -30°C minimum
starting temperature. Ballasts are wired at the
factory for 277 volts, unless specified. Compact
fluorescent transformers are electronic, 120 thru
277 volt for 26, 32 or 42 watt 4 pin lamps. LED
components are 120 thru 277 volt. LED constant
current driver operates at 350mA.
See next page
JOB
TYPE
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | Rev 10.15
NOTES
| 1 |
Traditional Concrete Bollard
TYPE
Pedestal bollard
CERTIFICATION
DIMENSIONS
All bollards shall be listed with ETL for outdoor, wet location
CATALOG
NUMBER:
TRD-OL
use, UL1598 and Canadian CSA Std. C22.2 no.250.
12.5"
Photometric Report
318mm
Compartment is
diameter of
compartment is
10.5"/267mm
10.50"/270mm
dia. or square
The ballast compartment can be set in a
poured-in-place c­ oncrete pad.
Friday, July 20, 2012
1.13 in
FILENAME: TRD-OL.IES
WARRANTY / TERMS AND CONDITIONS OF SALE
IESNA:LM-63-1995
Download:
[TEST] LRL 799-5C
http://www.hubbelllighting.com/resources/warranty/
[MANUFAC] ARCHITECTURAL AREA LIGHTING
Bolt circle of ballast c­ ompartment
anchor bolts is 9.25"/235mm
diameter.
7.50"
0.8 in
190mm
[LUMCAT] TRD-OL
AAL reserves the right to change product specifications
without notice
. DIA X 7-3/4" HT BOLLARD
[LUMINAIRE]
10.5"
Round bollard& 8" DIA X 6" HEIGHT DIFFUSING CYLINDER
[MORE] SEMISPECULAR TOP REFLECTOR
[MORE] BASE DOWN MEDIUM BASE SOCKET. TOTAL WATTS = 89
Bollard at base is 12"/305mm round.
[LAMPCAT] 1 - 70W CLR MH
Mounting holes are .87"/22mm diameter.
2.6 in
42"/1070
MM
42"/1070mm
ABOVE GRADE
The four (4) anchor bolts
SUMMARY DATA
above: grade
UNLIT VERSION
Base of bollard is
36"/ 915MM
(10"/254mm long), washers and nuts
Unlit
ABOVE GRADEversion:
buried 3"/75mm
EFFICIENCY (Total):
32.7
% galvanized.
supplied are hot
dipped
36"/915mm
0.2 in
below grade
3"/ 75 MM
EFFICIENCY (Down / Up):
16.8 % / 15.8 %
BELOW GRADE
above grade
EFFICIENCY (Street / House):
16.3 % / 16.3 %
ROADWAY CLASSIFICATION:
Unclassified, Unclassified
Conduit (by others)
CUTOFF CLASSIFICATION:
SEMICUTOFF
Drain pipe (by others)
LUMENS/LAMP:
5200
NO. OF LAMPS:
1
LUMINOUS OPENING:
RECTANGULAR
Photometric Report
Square bollard
Width:
0.00 (Feet)
CATALOGLength:
NUMBER: TRD-DC-36LED-BW
0.00
Bollard at base
is 10"/254mm square.
Height:
0.00
Mounting holes
are .87"/22mm
FILENAME:
INPUT
WATTS:TRD-DC-36LED-BW.IES
89
diameter.
2.642"/1070mm
in
42"/1070
MM
Base of bollard is
ABOVE GRADE
The four (4) anchor bolts
IESNA:LM-63-2002
UNLITabove
VERSIONgrade
:
buried
3"/75mm
36"/ 915MM
(10"/254mm long), washers and nuts
[TEST] KL02577
Unlit version:
ABOVE GRADE
below grade0.2 in
[TESTLAB] KIM LIGHTING supplied are hot dipped ­galvanized.
36"/915mm
3"/ 75 MM
[ISSUEDATE] 06/22/11
BELOW GRADE
above grade
[MANUFAC] ARCHITECTURAL AREA LIGHTING
14.75"
375mm
1.20 in
6.75"
0.5
in
170mm
1.04 in
12.75"
325mm
CONDUIT
(BY OTHERS)
DRAIN PIPE
(BY OTHERS)
FIXTURE STYLES
TPR-OL
[LUMCAT] TRD-DC-36LED-BW
[LUMINAIRE] REINFORCED ROUND CONCRETE BOLLARD WITH
[MORE] DECORATIVE CAST GRILL OPAL ACRYLIC LENS.
[LAMP] 36 WATT LEDS. 5100K
[BALLAST] 50 WATT THOMAS RESEARCH DRIVER. 350mA
[OTHER] SYSTEM WATTS = 41.9
TPR-VR
TPR-DC
SUMMARY DATA
129
931
111
UPLIGHT
UL100 o 4.2%
o
11.6%
UH180
221
602
TRD-OL
TRD-DC
TRD-VR
TRD-UN
TPR 36LED BW
LUMEN OUTPUT: 1700
ISO-ILLUMINANCE DIAGRAM (fc)
Mounting
UPLIGHT
48.5% Multiplier
Height
----------- 51.5%
-------------DOWNLIGHT
0.2
0.01
0.02
1.
2.
TSQ-VR
TSQ-UN
0.5
10
15
20
25
30
35
40
45
50
0.160
0.071
0.040
0.026
0.018
0.013
0.010
0.008
0.006
+ = Point of max candela
4' MOUNTING
HEIGHT
Mounting
Height
= 4 Feet. Each box represents one mounting height.
WATTAGE: 41.9
LUMEN OUTPUT: 837
EFFICACY: 20
Mounting
UPLIGHT
36.4% Multiplier
Height
DOWNLIGHT
-----------63.6%--------------
LUMEN
3
86
119
58
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
1.
TSQ-DC
EFFICACY: 58.4
ISO-ILLUMINANCE DIAGRAM (fc)
FORWARD LIGHT
FL30 o 0.4%
o
10.3%
FM60 FH80 o 14.2% FVH90 o 6.9%
TSQ-OL
1.04 in
12.75"
325mm
DRAIN PIPE
(BY OTHERS)
B1 U3 G1
Photometric Viewer v3.4 BACK LIGHT
BL30 o
BM60 o
BH80 o
BVH90 o
6.75"
0.5
in
170mm
Conduit (by others)
Drain pipe (by others)
NOTE: Concrete is always pre-paid and added.
WATTAGE: 89
2.5%
3.6% 2.1%
BM60
BH80 o
BVH90 o
Friday, July 20, 2012
CONDUIT
(BY OTHERS)
EFFICIENCY (Total):
- 83686.5 %
B2 U4 G2- 53200.3 % / - 30486.2 %
EFFICIENCY (Down / Up):
EFFICIENCY (Street / House):
- 41843.3 % / - 41843.3 %
LIGHT
LUMEN 0.05
ROADWAY CLASSIFICATION:FORWARDTYPE
IV, SHORT
o
CUTOFF CLASSIFICATION: FL30
NONCUTOFF
0.2% 9
LUMENS/LAMP:
-1o
2.5%129
FM60
NO. OF LAMPS:
1o
TPS-VR
3.6%
FH80
189
LUMINOUS OPENING:
VERTICAL
CYLINDER
o (Feet)
Diameter:
0.88
2.1%111
FVH90
Height:
0.67
INPUT WATTS:
41.9
BACK LIGHT
0.2% 9 0.1
BL30 o
o
TPS-DC
TPS-OL
TPR
14.75"
375mm
1.20 in
0.4%
10.3%
14.2% 6.9%
3
86
119
58
UPLIGHT
UL100 o 12.1%
o
24.4%
UH180
101
204
0.1
0.2
0.5
10
15
20
25
30
35
40
45
50
0.160
0.071
0.040
0.026
0.018
0.013
0.010
0.008
0.006
0.05
+ = Point of max candela
4' MOUNTING HEIGHT
Mounting Height = 4 Feet. Each box represents one mounting height.
IES files can be found at www.aal.net
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | Rev 10.15
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
| 2 |
Download