EPIGAP Optronic GmbH Data Sheet IR photodiode EOPD-1300-5-0.3
advertisement
EPIGAP Optronic GmbH Koepenicker Str. 325b D-12555 Berlin Fon: +49 (0)30 657637 60 Fax: +49 (0)30 657637 70 sales@epigap-optronic.de Data Sheet IR photodiode Radiation Infrared page 1 of 2 Rev. 02, 2014 EOPD-1300-5-0.3 Type Planar Technology InGaAs/InP Case 5 mm plastic Description: InGaAs-Photodiode mounted in standard 5 mm package without standoff . High spectral sensitivity in the infrared range (NIR, SWIR). Application: Optical communications, safety equipment, light barriers Maximum Ratings Tamb= 25°C, unless otherwise specified Parameter Active area, diameter Temperature coefficient of photocurrent Operating temperature range Storage temperature range Optical and Electrical Characteristics Tamb= 25°C, unless otherwise specified Parameter 1) Breakdown voltage Dark current Peak sensitivity wavelength Responsivity at 1300 nm Sensitivity range at 10% Spectral bandwidth at 50% Shunt resistance Noise equivalent power Specific detectivity Junction capacitance Photocurrent at = 1300 nm 1) 1) Symbol Value 300 7.4 -40 to +85 -40 to +100 AØ TC(IPh) Tamb Tstg Test conditions IR=10 µA VR=5 V VR=0 V VR=0 V VR=0 V VR=0 V VR=10 mV Symbol VR ID λp Sλ λmin, λmax āλ0.5 RSH λ = 1300 nm λ = 1300 nm VR=0 V VR=0 V Ee=1 mW/cm² NEP D CJ 4x10-15 4.5x1012 11 Iph 0.95 Min Unit μm %/K °C °C Typ Max 15 1600 0.9 40 5 800 3 1750 680 5 Unit V pA nm A/W nm nm Gā¦ W/ Hz cm ā Hz ā W pF µA for information only We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. EPIGAP Optronic GmbH Koepenicker Str. 325b D-12555 Berlin Fon: +49 (0)30 657637 60 Fax: +49 (0)30 657637 70 sales@epigap-optronic.de Data Sheet IR photodiode EOPD-1300-5-0.3 page 2 of 2 Rev. 02, 2014 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer.
