Prepared By
Project
Catalog #
Comments Date
EQUIVALENT
AVERAGE RATED LIFE
DIMMING
BASE
BALLAST COMPATIBLE
LENS
BEAM ANGLE
FIELD ANGLE
COLOR (K)
32 Watts, 40 Watts
Fluorescent
50,000 hrs
No
Medium Bi-Pin - G13
Instant Start Only
PET Coated Glass Frosted
190°
320°
3500, 4000, 5000
Product Description
Kobi Electric LED T8 Plug+Play tubes are low maintenance and energy efficient alternatives for traditional T12 and T8 fluorescent lamps. These fluorescent tube replacements work with most instant start electronic ballasts in conventional fluorescent fixtures. Kobi Electric T8s have a wide field angle, making them perfect for reflector equipped fixtures and wall-mount applications.
47.75”
1.1”
• Longer life, more energy efficient than fluorescent
• Suitable for indoor/damp locations and sheltered outdoor use
• Mercury and Lead free, UV and IR free
• Instant on to full brightness
For use with instant start ballasts only!
Do not use with rapid start, magnetic or programmed start ballasts!
LISTED
LM79 reports are available upon request.
5
YEAR
WARRANTY
Based on 12 hours of use per day.
Application Notes
1.
2.
Operating temperature range between -20°C and +45°C (-4°F and +113°F)
Not for use with emergency light fixtures or exit lights
This device complies with Part 15 of the FCC rules and has been tested and found to comply with the limits for a
Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Any changes or modifi cations not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
800-505-2106 / kobielectric.com
301 E. Risinger Road, Bldg 109
Fort Worth, Texas 76140 USA
Specifications are typical values and may change without notification.
© 2015 Kobi Electric, Inc. All Rights Reserved
T8 Plug+Play Tubes
Rev 25052016

Order
Code Part Number
K7P0
K7P1
T8-F4-1535-PP
T8-F4-1540-PP
Wattage 4
(W)
15
15
Voltage
(V) Base Lens
120-277 G13
120-277 G13
CCT 1
Typical
Lumens
Frosted 3500K 1900
Frosted 4000K 1900
2 CRI
>80
>80
3 Dim
No
No
Weight
(lbs)
Case
Quantity
0.55
0.55
25
25
NSF
Food Grade
YES
YES
K7P2 T8-F4-1550-PP 15 120-277 G13 Frosted 5000K 1950 >80 No 0.55
25
1. Thermally stable typical CCT (±10%) 2. Thermally stable typical lumens when used with 0.88 ballast factor ballast (±10%) 3. CRI - Color Rendering Index
4. Rated wattage based on testing done with Sylvania Electronics ballast model: QTP 2x32T8/UNV ISN-SC *Submitted for approval.
YES
BRAND
GE
MODEL
232MAX-G-N-DIYB
232MV-H-42T
332MV-N-42T
432MV-N-DIY
KEYSTONE KTEB-432-RIS-1-TP-SL
KTEB-232RIS-1-TP-SL
KTEB-2C72-1-TP
ACCUPRO AP-RC-232IP-120-1
AP-432IP-UNV
HOWARD INDUSTRIES E2/32IS-120MC
EP4/32IS/MV/MC/HE
PACIFIC BALLAST EB-232IS-120-RES
EIKO (POWER MASTER) PM-2X32T8-UNV-IS
SUNPARK
UNIVERSAL (TRIAD)
SLI5T
B4321UNVHP-A
ROBERTSON
ADVANCED
ISA259T8MV
IOPA-3P32-LW-N
SYLVANIA QTP 2x32T8/UNV ISN-SC
*The listed ballasts have been tested and proven to work under limited laboratory conditions. All possible electrical conditions cannot be accurately simulated, and therefore some discrepancy may exist.
Plug+Play tubes will work with ballasts with equal specifications.
800-505-2106 / kobielectric.com
301 E. Risinger Road, Bldg 109
Fort Worth, Texas 76140 USA
For use with instant start ballasts only!
Do not use with rapid start, magnetic or programmed start ballasts!
USL These devices have been investigated using requirements contained in UL 1993, Standard for Self
Ballasted Lamps and Lamp Adapters, and UL 8750, Standard for Light Emitting Diode (LED) Equipment for Use in Lighting
Products.
CNL These devices have been investigated using require ments contained in CSA C22.2 No. 1993, Standard for Self
Ballasted Lamps and Lamp Adapters, CSA C22.2 No. 250.13,
Light Emitting Diode (LED) Equipment For Lighting
Applications, TIL CSA B-81, Interim Certification
Requirements For Self Ballasted LED (TLED) Type A Lamp.
For the most up-to-date specifications, visit kobielectric.com.
Specifications are typical values and may change without notification.
© 2015 Kobi Electric, Inc. All Rights Reserved
T8 Plug+Play Tubes
Rev 25052016