Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — FCW series luminaires are designed for maximum energy efficiency for corridors,
stairwells or hospitality environments. The integral motion sensor and compact fluorescent night light option provide greater specification flexibility. Certain airborne contaminants can diminish integrity of
acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
Type
Surface-mount Corridor and Wall
CONSTRUCTION — Channel, ends and socket brackets are manufactured from 22-gauge cold-rolled steel.
Optional 20-gauge construction; specify 20GA.
High fixture efficiency and optical control deliver the peak candlepower needed to produce non-glare illumination levels from low mounting heights. Improved horizontal and vertical illumination. Long life – up
to 30,000 hours.
FCW
Standard paint after fabrication premium polyester powder coat finish, utilizing a seven-stage pretreatment
process of iron phosphate, a non-chromium sealer and a de-ionized water rinse to provide superior adhesion
and corrosion resistance.
SENSORED
One or two lamps, T8/T5
OPTICS — Acrylic prismatic diffuser.
ELECTRICAL — UL Listed wire, rated for required temperatures, used throughout. Linear lamps are secured
with rotary locking lamp sockets for ease of relamping and to reduce lamps disconnecting due to vibration
or incidental contact and is suitable for damp locations.
Ballasts: All standard ballasts are electronic, energy saving, thermally protected, Class-P, HPF, non-PCB,
Sound Rated A, CUL certified and comply with
ballast configuration for two-lamp ballasts.
Federal Ballast Law (Public Law 100-357, 1988). Default
Specifications
INSTALLATION — Designed for ceiling or wall surface mount.
WARRANTY — Standard one-year warranty for the fixture. Ballasts carry manufacturer warranties of three
to five years, depending on the application.
Note: Specifications subject to change without notice.
Length: 51.9" (131.8)
Width: 14.6" (37.08)
4-3/16
(10.6)
Depth: 5.95" (15.1)
Weight: 26.2 lbs. (11.88 kg)
5-3/8
(13.7)
All dimensions are inches (centimeters) unless otherwise specified.
ORDERING INFORMATION
Series
FCW2
FCW4
FCW8
Lead times will vary depending on options selected. Consult with your local sales representative.
Number
of lamps Lamp type
1
2
17
32
28
FO17T8
FO32T8
28W T5
Ballast
Voltage configuration
120
277
(blank)
1/4
2/1
All two-lamp
ballasts
One fourlamp ballast
Two
one-lamp
ballasts1
Ballast
GEB1OPS
GEB1OIS
Example: FCW4 2 32 120 GEB10PS 1CF9 MSIU
Options2
Electronic ballast,
<10% THD,
program start
Electronic ballast,
<10% THD,
instand start
1CF9
9W compact fluorescent
night light3
20GA
20-gauge wiring
EL
Emergency battery pack
(nominal 300 lumens)4
EL14
Emergency battery pack
(nominal 1400 lumens)4
Integral sensor - all lamps on/off5
MSIU
Ultrasonic, wall mount
MSI360LB 360° infrared ceiling
mount, 7-15'
Integral sensor - night light stays on5
MSIUNL
Ultrasonic, wall mount
MSI360LBNL
MSI360NL
360° infrared ceiling
mount, 7-15'
360° infrared ceiling
mount, 15-45'
Notes:
1 Not available with any sensor options. Consult factory.
2 Battery packs available.
3 Night light lamp not included. Requires any G23 base two-pin 9W compact fluorescent lamp. Supplied by others.
4 Not available on 17T8.
5 Sensors wired to toggle between night light and normal mode when used with 1CF9.
FLUORESCENTFCW-T8-T5
FCW Surface-mount Corridor and Wall, T8
DIMENSIONS
Inches (centimeters). Subject to change without notice.
4-3/16”
55-1/8”
4-3/16
(10.6)
4-3/16
(10.6)
4-3/16
(10.6)
4-3/16
(10.6)
5-3/8
(13.7)
5-3/8
(13.7)
One-lamp profile
Two-lamp profile
55
(139.7)
11-1/16
(28.1)
7/8
(2.2)
7/8
(2.2)
5-15/16
(15.1)
1
(2.5)
4-1/8
(10.5)
7-15/16
(20.2)
2-1/16
(5.2)
7/8
(2.2)
1/2
(1.3)
1/2
(1.3)
4-15/16
(12.6)
6-15/16
(17.7)
PHOTOMETRICS
Consult factory for photometric information.
FCW-T8-T5
FLUORESCENT:
One Lithonia Way Conyers, GA 30012
Phone: 1-800-858-7763 Fax: 770-929-8789
www.lithonia.com
© 2010-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/01/12