Wet Location
Architectural
Emergency &
Lighting
ILLUMINA SERIES
High Ef
ficiency - W
et Location
Efficiency
Wet
PRODUCT OVERVIEW
The ILLUMINA series is designed to be resilient, highly efficient
and easy to install. Lightweight, durable corrosion resistant
polycarbonate construction ensures long fixture life. Bonded
anti-aging expanded polyurethane gasketing protects the
ILLUMINA series from moisture ingress and allows for installations in most damp & wet locations. The lightweight design
and versatile configurations, make for trouble-free installation.
EXTERNAL SPECIFICA
TIONS
SPECIFICATIONS
The ILLUMINA series fluorescent luminaire is constructed from
100% corrosion, flame and vandal resistant polycarbonate. The
C.L.E. (complete light emission) polycarbonate lens has been
designed for efficiency and durability. Eight (8) fiberglass
reinforced closure clips fit flush to the ILLUMINA 4 foot housing
(4 clips on the 2 foot version) and assist in maintaining the
integrity in damp/wet environments.
DIMENSIONS (in.)
REFLECTOR
The ILLUMINA series incorporates a “dual concave” parobolic
high-output, high-efficiency reflector. Vacuum vaporization is
used to create the efficient reflective finish that is standard on
all ILLUMINA series reflectors.
DIFFUSER
The ILLUMINA series features the C.L.E. (complete light emission) diffuser.) Durable 100% polycarbonate (LEXAN) has been
UV stabilized to reduce the yellowing index and ensure long
fixture life and efficient light distribution.
INST
ALLA
TION
INSTALLA
ALLATION
Wattage
2x32W
2x28W
2x54W
2x17W
2x14W
2x24W
A”
50”
50”
50”
26”
26”
26”
B”
6 1/2”
6 1/2”
6 1/2”
6 1/2”
6 1/2”
6 1/2”
C”
4 1/4”
4 1/4”
4 1/4”
4 1/4”
4 1/4”
4 1/4”
The ILLUMINA series of luminaires have been designed for
ceiling, wall, suspension & pendant installations. Suitable for
wet location installations on normally inflammable surfaces.
IMPORTANT: Illumina BS100 (2 & 4) accepts up to 1/2” (O.D.) EMT, galvanized, aluminum or stainless steel
ORDERING INFORMA
TION
INFORMATION
Series
BS100
EXAMPLE:
DESCRIPTION:
xx
Model
2 (2ft)
4 (4ft)
Operation
HT (AC only)
SE (Emergency only)
SA (AC & emergency)
Lamp Configuration
(2ft lamps)
A (2x17w T8)
B (2x14w T5)
C (2x24w T5 HO)
(4ft lamps)
D (2x32w T8)
E (2x28w T5)
F (2x54w T5 HO)
Input V
oltage
Voltage
UNV (120/277V)
US (120V)
US2 (277V)
Options
FP (fuse protection)
NOTE: UNV available for T8 configurations only
BS100-4-HT-D-UNV
Illumina BS100, 4ft version, AC only, 2x32W T8 lamps, universal 120/277VAC
Beghelli USA 3123 Commer
ce Parkway
Commerce
Parkway,, Miramar
Miramar,, Florida 33025 Ph: 800-726-4316 Ph: 954-442-6600 Fx: 954-442-6677 Email: beghelli@beghelliusa.com
CSA/US Listed
Damp & Wet
IP65 Rated
ILLUMINA BS100 TTechnical
echnical Data
LAMP TECHNOLOGY
SIMPLICITY
The ILLUMINA series of fixtures can be configured with linear
fluorescent T8, T5 and T5 H.O. lamps. Providing the greatest
amount of flexibility to best match your application. Two (2)
and four (4) foot versions are available in 2-lamp configurations
(2x32, 2x28, 2x24, 2x17, 2x14, 2x24). T8 lamp versions are offered
standard with a (UNV) universal input voltage ballast.
IMPORTANT: When ordering T5 lamp versions, the input
voltage must be specified as (US = 120V) or (US2 = 277V).
The ILLUMINA series is easy to install and maintain. The threepiece design (lens, reflector, housing)
fit together to form a weather-proof
seal and durable luminaire. The no
tool design allows for the industries
easiest installation.
Simply remove the high-output lens
by opening the flush polycarbonate
clips (2ft = 4 clips / 4ft = 8 clips).
Remove the high-efficiency reflector
from the housing by pinching the
two (2) pressure clips together and
lifting the reflector away from the
housing. (Note: the reflector can be
hung from the housing using the
incorporated service bracket.)
Wiring of the electronic ballast can
now be accomplished. 1/2” conduit
knockouts are provided on each end
of the housing. Other housing entry
points can be used for mounting
variations. Finally, snap the reflector
back in place, secure the high-output
lens and lock down the closure clips.
HOUSING
The ILLUMINA series utilizes a durable injection molded, selfextinguishing polycarbonate housing. Extremely lightweight
(BS100-4-HT-D-UNV weighs only 5lbs.) and durable, the ILLUMINA
BS100 series is ideal for use in environments where materials
such as steel and aluminum may deteriorate. The eight (8)
closure latch clasps are incorporated into the housing resulting
in a clean appearance while securely locking the diffuser to
the housing. A liquid silicon gasket is “hot-bonded” to the
housing during manufacturing, this properly seals the entire
fixture.
SE and SA CONFIGURA
TIONS
CONFIGURATIONS
DIFFUSER
The ILLUMINA BS100 series (2 and 4) features the innovative
C.L.E. (complete light emission) diffuser. The UV stabilized,
clear diffuser, provides optimum light output and impact
resistance. Making use of a clear prismatic lens can contribute
up to +10% greater luminous distribution over other translucent
lens materials. This permits increased spacing between fixtures
and improves overall performance efficiency.
The ILLUMINA BS100 series can be configured with emergency
battery packs in both SE and SA versions. Offered as standard
equipment, a single 700 lumen wet location emergency pack is
used in SE and SA versions.
Additional ballasts are available and must be specified when
ordering. Please note the offered configurations:
SE:
REFLECTOR
The 2 foot and 4 foot versions of the ILLUMINA BS100 features a SA:
dual concave parobolic reflector with a “vacuum metalization”
finish.
IP65 / WET LOCA
TION GASKETING
LOCATION
The ILLUMINA series (HT) carries an IP65 rating that ensures
integrity in damp and wet locations. Ceiling mounted lighting
fixtures like the ILLUMINA series are especially vulnerable to fire
sprinkler activation since lighting and emergency lighting units
are often installed right next to sprinkler heads. The ILLUMINA
series provides protection not just from ambient moisture, but
also from jets of water like those given off by broken or activated sprinkler heads.
2x700 lumen wet location packs
1x1400 lumen pack
2x1300 lumen packs
1x3500 lumen pack
2x700 lumen wet location packs
1x1400 lumen pack
2x1300 lumen packs
1x3500 lumen pack
(T8)
(T8)
(T8 & T5 H.O.)
(T8, external mount)
(T8)
(T8)
(T8 & T5 H.O.)
(T8, external mount)
For additional information on available configurations, please
consult the factory
WARRANTY
The ILLUMINA series comes from the factory with an unconditional 5-year product warranty. Lamps are not covered.
Beghelli USA 3123 Commer
ce Parkway
Commerce
Parkway,, Miramar
Miramar,, Florida 33025 Ph: 800-726-4316 Ph: 954-442-6600 Fx: 954-442-6677 Email: beghelli@beghelliusa.com
xx