IP-65
Architectural
Emergency &
Lighting
JOB:
TYPE:
Illumina 100
PRODUCT OVERVIEW
The ILLUMINA 100 series of fluorescent fixtures have been
designed to be highly efficient, architecturally pleasing and
easy to install. The reflector and diffuser have been designed
and optimized for the two (2) T8 or T5 lamps resulting in
maximum luminous output. The liquid-silicon sealing gasket
combined with the flush lens clips provide superior
protection from moisture infiltration.
EXTERNAL SPECIFICATIONS
The ILLUMINA 100 series fixtures are manufactured from
high quality corrosion, flame and vandal resistant, UV
stabilized polycarbonate. Beghelli next generation exterior
flush latch clips are constructed from a fiberglass reinforced
polyester based resin to ensure the integrity of the ILLUMINA
100 lighting fixture. An aging resistant liquid silicon gasket
seals the entire fixture. The housing is designed with conduit
knockouts at either end and also through the back.
REFLECTOR
The ILLUMINA 100 reflector is made of injection molded,
self-extinguishing, UV stabilized polycarbonate. The reflector
supports components including the ballast and lamp
holders.
DIMENSIONS (in.)
A
C
DIFFUSER
The ILLUMINA 100 diffuser is UV stabilized for durability and
provides superior light output. The ILLUMINA 100 comes
standard with a clear prismatic diffuser. On average, an
increase of +10% light output is achieved by using the clear
prismatic diffuser.
INSTALLATION
Surface ceiling or wall, or suspension mount. Suitable for
wet location installations.
B
Wattage
2x32W
2x54W
A”
51”
51”
B”
7”
7”
C”
4”
4”
ORDERING INFORMATION
Series
BS100
Lamps
48T8232
(Two (2) x 32W)
T8 fluorescent lamps)
48T5254 (two (2) x 54W)
T5 fluorescent lamps)
Ballast
AC (AC only electronic ballast)
DB (Dimmable electronic ballast)
Input Voltage
120V (120VAC input)
347V (347VAC input)
Options
SH (Suspension mount
metal hooks)
EXAMPLE:
BS100-48T8232-AC-347V.
DESCRIPTION: Illumina 100 luminaire, two (2) x T8 32W lamps, AC only, 347 Volt AC input.
36
Beghelli Canada Inc. 151 Whitehall Drive, Unit 2 Markham, Ontario, Canada L3R 9T1 Ph: 877-358-9638 Ph: 905-948-9500 Fx: 905-948-8673 Email: sales@beghellicanada.com
CSA certified
UL924 Listed
Damp & Wet
UL1570 Listed
Technical Data
INSTALLATION
IP65 / WET LOCATION GASKETING
The ILLUMINA 100 series of fluorescent fixtures are designed
for maximum installation flexibility. Multiple conduit knockouts are located on either end of the fixture and also on the
back. Two (2) flush, stainless steel mounting adapters
provided on the back accept mounting hooks for chain
suspension mounting. The superior design of the mounting
adapters avoids placing the housing of the fixture under
installation related stresses. The diffuser is easily removed by
opening the flush latch clips. The parabolic reflector is held
in place with an integral snap mount system that engages
and releases without the need for any tools. Once released,
the reflector can be suspended on the snap mount
providing complete access to the ballast and wire entry
while freeing up the installer’s hands.
The ILLUMINA 100 carries an IP65 / Wet location rating due
to the advanced liquid silicon gasketing that completely
seals the unit from moisture infiltration. Lighting fixtures are
especially vulnerable to fire sprinkler activation since these
fixtures are often installed right next to sprinkler heads. The
IP65 / Wet location rating ensures protection not just from
ambient moisture but also from jets of water like those given
off by broken or activated sprinkler heads.
LAMP TECHNOLOGY
The ILLUMINA 100 series of linear fluorescent fixtures are
available with T8 style 32 Watt or T5 54 Watt fluorescent
lamps.
HOUSING
The ILLUMINA 100 series utilizes a durable injection molded,
self-extinguishing polycarbonate housing and reflector.
A liquid silicon gasket is bonded to the ILLUMINA 100
housing at the time of manufacturing, this effectively seals
the entire fixture from moisture. Once installed, fiberglass
reinforced latch clips securely lock the diffuser into the
housing gasket.
Flush Integrated
Latch Clips.
REFLECTOR
The reflector, designed specifically for the ILLUMINA 100 has
a complex parabolic profile that provides optimal lighting
performance. During the manufacturing process, the
reflector undergoes an aluminum coating process within a
vacuum environment that produces a finish with an
extremely high reflectance factor.
Easy Access to Ballast
and Wiring.
DIFFUSER
The diffuser for the ILLUMINA 100 series is manufactured
from self-extinguishing, impact resistant, UV stabilized
polycarbonate. The high clarity of the polycarbonate and
quality construction ensure that light absorption is reduced
to a minimum. The diffuser is designed with an advanced
internal prismatic finish that promotes the conservation of
luminous energy. The external surface of the diffuser is
completely smooth, helping to prevent dust and particle
buildup, while also facilitating simplified cleaning, if ever
necessary.
Stainless Steel
Suspension Mounting
Hooks.
CORROSION RESISTANT
The corrosion resistant, polycarbonate material used in the
ILLUMINA 100 is resilient to most environments and
chemical exposure. The increased durability allows for the
ILLUMINA 100 to be installed in areas such as: fish farms,
greenhouses, chemical spraying areas, marinas, docking
bays and automated car washes.
Beghelli Canada Inc. 151 Whitehall Drive, Unit 2 Markham, Ontario, Canada L3R 9T1 Ph: 877-358-9638 Ph: 905-948-9500 Fx: 905-948-8673 Email: sales@beghellicanada.com
37