SWD
High Abuse
Surface Mount
Fluorescent Linear
PRODUCT SPECIFICATION
The SWD series is designed for general purpose
lighting in high abuse environments.
Job Name
Mounting
Fixture Type
Surface mounts to ceiling. Knockouts on both
ends permit continuous fixture mounting.
Catalog No.
Lens
Approval
Date
One piece, vandal resistant, .156 in., extruded,
UV stabilized, prismatic polycarbonate lens.
Housing
16 gauge cold rolled steel, die-formed to
shape with seams welded and ground
smooth. Additional gauges, aluminum and
stainless steel available.
Finish
Polyester powder-coated after phosphate
pretreatment for superior adhesion and corrosion
resistance. Brushed stainless steel available.
12.5 in. SW12D / 14 in. SW14D
Hardware
4 in.
Stainless steel, tamper-proof fasteners.
Certifications
UL Listed damp or wet location. Covered
ceilings only.
16 in.
ø 0.375 in. mounting
20 in.
ø 0.875 in. knockout
10.5 in. SW12D / 12 in. SW14D
25 in.
-
SWD
one
two
one
Fixture Width
12D
14D
12.5 in. width
14 in. width
two
Lamps (not included)
14
17
24
4B
28
32
54
three
2
3
4
four
N
D
X
49 in.
three
2 ft. 14 W T5
2 ft. 17 W T8
2 ft. 24 W T5 HO
2 ft. 40 W T5 RS biax
4 ft. 28 W T5
4 ft. 32 W T8
4 ft. 54 W T5 HO
Lamp Quantity
two
three
four
four
five
18 gauge, minimum security
16 gauge, medium security, std
14 gauge, maximum security
six
seven
-
Aluminum
Cold rolled steel, std
Stainless steel
six
Finish
R
W
Brushed stainless steel
White
seven Voltage
120
277
347
VAR
DM
EL
PR
120 V, 60 Hz
277 V, 60 Hz
347 V, 60 Hz
Variable, 120-277 V, 50/60Hz
Ballast
Dimming
Electronic Instant Start, std T8
Program Rapid Start, std T5, option T8
-
15
nine
eight
Material
A
C
S
eight
Material Gauge
five
nine
ten
eleven
twelve
Lens
15
.156 in. polycarbonate K12 prismatic
ten
Fasteners
AP
TP
PH
Stainless steel allen head with pin
Stainless steel torx head with pin
Phillips, non-security
eleven UL Listing
D
W
Damp location
Wet location
twelve Options
2C
CU
E1
E2
FH
NL
NL-LED
Two-circuit wired
Canadian UL Listing
One lamp emergency ballast
Two lamp emergency ballast
Fuse and holder
Night light, for 7 or 9 W PL bipin
Night light, LED
Modifications are available to meet custom requirements.
© The L.C. Doane Company PO Box 700, Ivoryton, CT 06442 tel: 860.767.8295 fax: 860.767.1397 www.lcdoane.com