Aquatherm Technical Bulletin

advertisement
aquatherm
500 S 500 W, Lindon, UT 84042 801-805-6657
Aquatherm Technical Bulletin
201207A-AQTTB
Gaskets
Aquatherm has recently decided to no longer include an EPDM ring gasket with each of the flange adapters. The reason for this
decision is that by including a gasket there is an implication that it would be appropriate for all different applications and fluids, when
it is not. There are applications where the gasket material (EPDM, SBR, NBR, PFE, PTFE) or configuration (ring vs. full face) may
require alternate gaskets.
During this transition, product orders may result in the receipt of some flange adapters with gaskets and some without. If included,
and assuming the EPDM ring gasket is appropriate for the particular application, these gaskets may be used.
Aquatherm recommends using a full face rubber (black EPDM or red SBR) gasket with its flanges. Viton® gaskets may also be used
if needed for chemical resistance. The bolt and bolt torque do not change with these different gasket materials. Other materials
may require different bolt torque. The gasket should have an inside diameter consistent with the ID of the flange adapter. For lower
pressure systems, and smaller diameters (4” and down), ring gaskets may be used but there is the possibility of blow-outs during
pressure testing. Ring gaskets are also more susceptible to leaks if the flanges and connected piping are not aligned properly during
installation. The gasket should have an inside diameter consistent with the ID of the flange adapter.
It is important to note that any gasket material used, whether purchased from Aquatherm or another source, is not covered under
the Aquatherm warranty program.
On the following pages please find a Flange Adapter Table listing the dimensions of the various flange adapters available from
Aquatherm. This table may be used in selecting the proper size gasket for various sized flange adapters.
Also, please find a short listing of some alternative gasket manufacturers. These manufacturers have a large variety of different
gaskets and materials available. Please contact the individual manufacturers for specific details concerning price and availability.
View all Aquatherm Technical Bulletins at Aquatherm.com/bulletins
aquatherm
500 S 500 W, Lindon, UT 84042 801-805-6657
Flange adapter table
Flange adapter
part no.
Pipe SDR
Dimension
ND - OD (in - mm)
Face ID
(in)
Face ID
(mm)
Face OD
(in)
Face OD
(mm)
115512
115514
11
1" - 32 mm
1.01
26
2.68
68
11
1 1/4" - 40 mm
1.33
34
3.07
78
115516
11
1 1/2" - 50 mm
1.73
44
3.46
88
115518
11
2" - 63 mm
2.20
56
4.02
102
115520
11
2 1/2" - 75 mm
2.76
70
4.80
122
115522
11
3" - 90 mm
3.19
81
5.43
138
115524
11
3 1/2" - 110 mm
4.02
102
6.22
158
115526
11
4" - 125 mm
4.02
102
6.22
158
2515530
17.6
6" - 160 mm
6.18
157
8.34
212
115531
11
6" - 160 mm
6.02
153
8.34
212
115530
7.4
6" - 160 mm
6.10
155
8.34
212
2515534
17.6
8" - 200 mm
7.64
194
10.55
268
115535
11
8" - 200 mm
7.40
188
10.55
268
115534
7.4
8" - 200 mm
7.48
190
10.55
268
2515538
17.6
10" - 250 mm
9.45
240
12.60
320
15539
11
10" - 250 mm
9.45
240
12.60
320
15538
7.4
10" - 250 mm
9.25
235
12.60
320
2515542
17.6
12" - 315 mm
10.98
279
14.57
370
15543
11
12" - 315 mm
10.12
257
14.57
370
2515544
17.6
14" - 355 mm
12.36
314
17.01
432
15545
11
14" - 355 mm
11.42
290
17.01
432
2515546
17.6
16" - 400 mm
13.94
354
19.06
484
2515548
17.6
18" - 450 mm
15.67
398
23.07
586
2515550
17.6
20" - 500 mm
17.44
443
23.03
585
View all Aquatherm Technical Bulletins at Aquatherm.com/bulletins
aquatherm
500 S 500 W, Lindon, UT 84042 801-805-6657
The following are suppliers of alternative gasket materials:
Ames Rubber Manufacturing Corporation
19 Ames Boulevard
Hamburg, New Jersey 07419-1514
973-827-9101
http://www.amesrubber.com/
CTG
8819 Emmott Rd.
PO Box 40940
Houston, TX 77240-0940
800-299-1685
http://www.ctgasket.com
U.S Rubber Supply Co.
238-A N. 9th Street
Brooklyn, NY 11211
718-782-7888
http://www.usrubberco.com/
Standard Washer & Mat, Inc.
299 Progress Drive\PO Box 368
Manchester, CT 06040
860-643-5125
http://www.standardwasher.com/
Ryan Herco Flow Solutions
PO Box 588
Burbank, CA 91503-0588
818-841-1141
http://www.ryanherco.com
Valley Rubber
2170 S 3600 W
Salt Lake City, UT 84119
801-972-6603
Cain Bolt & Gasket, Inc.
7724 7th Avenue South
Seattle, WA 98108
800-340-1891
http://cainboltandgasket.com
View all Aquatherm Technical Bulletins at Aquatherm.com/bulletins
Download