MODIFIED SINE WAVE TRUE SINE WAVE MODIFIED

Battery Chargers
Inverter/Chargers
Fast
Easy
Wiring Installation
TRUECHARGE™2 Battery Chargers – Crank
N E W F E AT U R E S
Up-to 120A Globally!
PARALLEL STACKING FOR
Designed for commercial and recreational applications worldwide, the TRUECHARGE2 battery chargers lead the industry with a small
footprint and ultra-compact design.
2X
OUTPUT POWER
· The new generation models are now equipped with parallel stacking feature which enables two chargers* of either 12V or 24V configuration
to work together to combine the output, achieving up to 120A and 60A for large 12V and 24V battery banks respectively
Worldwide Input Voltage Range
· Automatically senses the power input voltage (90-265 Vac, 47-63 Hz)
· Enables proper delivery of a full three-stage charge as it can charge from less than perfect quality shorepower or generator power
Energy Efficient, Low Noise Charging
· Power Factor Corrected charging to effectively use incoming AC power, minimizing current draw and reducing electrical interference
PROVIDES UP TO
2X
· Temperature-compensated charging helps ensure proper charge in the heat of summer and during cold winter storage
OUTPUT
CURRENT
· Powerful, configurable, versatile
APPLICATIONS
· Parallel stacking allows two units to work in synergy to provide
up to twice the rated current and charging output, resulting in
the ability to operate high power loads while charging large
battery banks
NEW
24V
· Series stacking for operation of 240 Vac applications, such as a dryer
TRUE
SINE WAVE
60A
60A
80A
80A
20A
20A
20A
20A
12V Applications 10A 20A 40A 60A 80A 100A 120A
40A
40A
100A
100A
50A
50A
10A
10A
10A
60A
10A
60A
24V MODELS
24V
OUTPUT
24V Applications 10A 20A 30A 40A 50A 60A
120A
120A
12V OUTPUT
· Power factor-corrected, multi-stage charging
· Meets UL458 with marine supplement, CSA, ABYC & FCC, Class B
OPTIONAL ACCESSORIES:
System Control Panel (809-0921), Automatic Generator Start (809-0915), GFCI Option (808-9003), Remote Panel (808-9002),
75’ Network Cable (809-0942), 25’ Network Cable (809-0940), Drip Shield (808-9004), Cable for Series Stacking (808-9005),
Sequence Power Manager (809-0913)
· Compact and light weight with exceptional surge capacity
· Series stackability allows two units to power 120/240 Vac applications
· LCD remote control panel and temperature sensor included
· Meets CE/EMC, ABYC, UL1564 & UL1236 with marine supplement standards
30A
30A
· Faster AC transfer
OPTIONAL ACCESSORIES:
PROsine™ Inverters
· Feature-rich, high performance true sine wave inverters
· Built-in AC transfer switch, detachable remote panel
Models
Part number Input voltage
Max. continuous watts
Surge rating
AC output
Charger outputRemote panel
Freedom SW 2012
815-2012
12 V
2000 W
4000 W
GFCI and/or Hardwire
100 A
Optional (On/Off, Advanced)
Freedom SW 3012
815-3012
12 V
3000 W
6000 W
GFCI and/or Hardwire
150 A
Optional (On/Off, Advanced)
PROsine 2.0
805-2020 12 V
2000 W
4500 W
GFCI and/or Hardwire
100 A
Included (Digital)
Freedom SW 2024
815-2024
24 V
2000 W
4000 W
Hardwire
50 A
Optional (On/Off, Advanced)
Freedom SW 3024
815-3024
24 V
3000 W
6000 W
Hardwire
75 A
Optional (On/Off, Advanced)
12V MODELS
NOTE: 12V (80A, 100A, 120A) and 24V (40A, 50A, 60A) achieved through stacking.
* Doesn’t apply to TRUECHARGE2 12V/10A charger
Models
Part number Output voltage
Power output
Battery banks
Remote panel
Parallel stacking
Truecharge 10
804-0100 12 V
10 A
One
No
No
TRUECHARGE2 10
804-1210
12 V
10 A
Two
No
No
TRUECHARGE2 20
804-1220-02 12 V
20 A
Three
Optional
Yes
TRUECHARGE2 40
804-1240-02
12 V
40 A
Three
Optional
Yes
TRUECHARGE2 60
804-1260-02
12 V
60 A
Three
Optional
Yes
TRUECHARGE2 10
804-2410
24 V
10 A
Three
Optional
Yes
TRUECHARGE2 20
804-2420 24 V
20 A
Three
Optional
Yes
TRUECHARGE2 30
804-2430
24 V
30 A
Three
Optional
Yes
Easy
Wiring Installation
N E W F E AT U R E S
PARALLEL STACKING FOR
2X
SERIES STACKING FOR
120/240
Vac
Freedom HF Inverter/Chargers
· Compact, full-featured, economical modified sine wave solution
· Meets UL458 with marine supplement, CSA & FCC, Class B
· Ignition lockout helps to minimize battery drain by disabling
the inverter when the ignition is turned off
· EMS models (part# 806-1055-02 & 806-1840-02)
MODIFIED · Detachable digital remote panel
SINE WAVE
OUTPUT POWER
APPLICATIONS
· Temperature compensated battery charging with equalization to
condition batteries for longer life
TRUECHARGE 2 Remote Panel
· Full-function remote allows you to monitor and control battery charger performance from a remote location, including features not
accessible from the charger’s onboard display
· Enables the parallel stacking feature of the TRUECHARGE2 Battery Chargers
Models
AC output
Remote panel
Features
PowerHub 1800 (PH1800-GFP)
PowerPack 1500 (802-1500)
PROwatt SW 600
806-1206 12 V 540 W
1200 W
No
GFCI
Optional (On/Off)
Max. continuous power
1440 watts
1350 watts
PROwatt SW 1000
806-1210 12 V 900 W
2000 W
No
GFCI
Optional (On/Off)
Automatic transfer to AC power
Yes
No
¹ customer installs 100-200 Ah battery (ies)
in the included battery enclosure,
second battery enclosure (sold separately)
can accommodate another 200 Ah =
total 400 Ah. Battery not included.
PROwatt SW 2000
806-1220 12 V 1800 W
3000 W
No
GFCI
Optional (On/Off)
Battery capacity
100-400 Ah¹
Built-in 51 Ah
PROsine 1000
806-1000 12 V 1000 W
1500 W
No
GFCI
Included (Digital)
² charge controller not included
AC receptacles
4
2
PROsine 1800
806-1800 12 V 1800 W
2900 W
No
GFCI
Included (Digital)
PROsine 1800
806-1802 12 V 1800 W
2900 W
Yes
Hardwire w/ transfer relay
Included (Digital)
AC hardwire capability
Yes
No
PROsine 1800
806-1850 24 V 1800 W
2900 W
No
GFCI
Included (Digital)
12 volt DC port
No
Yes
PROsine 1800
806-1851 24 V 1800 W
2900 W
No
Hardwire
Included (Digital)
Solar input²
Yes (hardwire, up to 12V/32A)
Yes³
PROsine 1800
806-1852 24 V 1800 W
2900 W
Yes
Hardwire w/ transfer relay
Included (Digital)
Wind input²
Yes (hardwire, up to 12V/80A)
Yes³
Installation
Stationary
Mobile
PRO Series (XM) Inverters
· Compact but powerful modified sine wave inverters
· Designed to be hard-wired using a terminal strip or by
connecting AC through GFCI receptacles
MODIFIED
SINE WAVE
XPowerTM Inverters
· Economical, modified sine wave inverters for trucks, RVs and boats
· Operates a variety of consumer electronics, entertainment systems,
power tools, office equipment and more
· Built-in AC transfer switch, detachable remote panel
· Meets UL458 & FCC, Class B standards
· Remote on/off switch included with XPower 1000, 1500, 3000 & 5000
watt models
· Meets UL458 & CSA standards
Input voltage
Max. continuous watts
Surge rating
Transfer switch
AC output
Remote panel
OPTIONAL ACCESSORIES:
12 V
320 W
640 W
No
AC Outlet
No
Automatic Generator Start (84-2064-00), Freedom Basic Remote (84-2056-01), 12V Ignition Lockout Switch (82-0122-12)
XPower 450
851-0451
12 V
360 W
700 W
No
GFCI
No
XPower 1000 Inverter 813-1000-UL
12 V
1000 W
2000 W
No
GFCI
Included (On/Off)
Charger outputRemote panel
XPower 1500 Inverter
813-1500-UL
12 V
1500 W
3000 W
No
GFCI
Included (On/Off)
813-3000-UL
12 V
2500 W
5000 W
No
GFCI and/or Hardwire
Included (On/Off)
AC output
STANDALONE ACCESSORIES
Connection Kit for LinkLITE & LinkPRO (854-2021-01), Communication Kit for LinkPRO (854-2019-01),
Temperature Kit for LinkPRO (854-2022-01)
Auxiliary Battery Charger (82-0123-01)
· Designed to charge auxiliary or starting batteries from an inverter/
charger or other charging source with minimal voltage drop
· Battery temperature sensor included
813-0400-01
Surge rating
³ solar or wind may be connected through
12V DC port (max. 8 amps) or hardwired to
direct DC terminal, requires external charge
controller
LinkLITE (84-2030-00) and LinkPRO (84-2031-00) Battery Monitors
· LinkPRO also displays the time remaining of the battery bank
· Selectively displays voltage, charge and discharge current, consumed amp hours and remaining % battery capacity
· LinkLITE can measure currents up to 999 amp-hours whereas LinkPRO can measure up to 9,999 amp-hours.
OPTIONAL ACCESSORIES:
Part number Max. continuous watts
· Also accepts solar and wind inputs
Transfer switch
XPower Digital 400
Input voltage
·U
ses power from the grid or generator to charge batteries
(sold separately)
Surge rating
Models
Part number · S ystem consists of 1800W inverter, 40A charger and a battery
box that can store up-to 200 amp-hour of battery power
·A
dditional battery box can be added to achieve 400 amp-hour
of battery capacity
Max. continuous watts
· P ower sharing reduces charging current when AC loads are activated
to minimize nuisance tripping of shorepower breaker
· Meets UL458 regulatory standards
™
·D
C connections provide recharge flexibility from alternate
sources such as solar and wind
Input voltage
Freedom 458 Inverter/Chargers
·H
igh performance, modified sine wave solution
· Ideal for weather emergencies, power outages and recreational
activities
Part number · Also available in two OEM exclusive versions
· Truck model (part# 806-1840-01) · Recharge at home or in a vehicle or RV
· L ow voltage alarm and shutdown helps prevent deep battery
discharge
Models
· GFCI and hardwire options
·Q
uick-connect AC terminal block on both AC input and output for
easy wiring and fast installation
·O
verload and over-temperature shutdown
· Mobile AC power system can be used indoors or dry outdoors
· P rimary power solution for an off-grid cottage, cabin or
backup power for grid-connected homes when utility power
goes out
· Meets UL458 with marine supplement, CSA, ABYC & KKK-A-1822
· Available in 12V and 24V configurations in both 110V/60Hz &
230V/50Hz models
UICK CONNECT
Fast
· Excellent alternative to a generator – no noise or fumes
PowerHub 1800
OPTIONAL ACCESSORIES:
Remote Interface Panel (808-1800)
· Power sharing reduces charging current when AC loads are
activated to minimize nuisance tripping of shorepower breaker
·M
eets UL458 with marine supplement, CSA, ABYC & KKK-A-1822
PowerPack 1500
· Hardwire capable through optional external Transfer Switch
(110V/60Hz models only)
· Meets UL458, CSA & FCC, Class A standards
· Available in both 110V/60Hz & 230V/50Hz models
TRUE Remote On/Off Switch (808-9001), Transfer Relay (808-0915), 50’ Remote Cable (31-6262-00)
SINE WAVE
PROsine™ Inverter/Charger
· Built-in protection against surges and spikes on the AC power line
40A
40A
PROwatt™ SW Inverters
·C
ost-effective, true sine wave power solution
· Dual GFCI AC receptacles and USB charge port
· Ignition lockout (requiring Remote Switch) helps to minimize battery
drain by disabling the inverter when the ignition is turned off
· Generator Support Mode enables the Freedom SW to
automatically supplement a generator when AC loads exceed the
generator’s capacity
· Full output at higher temperatures
Global Safety & Protection Features
Backup Power
Freedom SW Inverter/Chargers
SERIES STACKING FOR
120/240
Vac
Parallel Stacking Feature
NEW PARALLEL FEATURE
Inverters
UICK CONNECT
· Compatible with either 12V or 24V battery banks
NOTE: Specifications subject to change without notice. Actual product may look different than the image shown in this catalog.
FREEDOM SEQUENCE INTELLIGENT POWER MANAGER
Freedom HF 1000
806-1020
12 V
1000 W
2000 W
GFCI and/or Hardwire 20 A
Included (Digital)
XPower 3000 Inverter
Freedom HF 1055
806-1055 12 V
1000 W
2000 W
GFCI and/or Hardwire
55 A
Included (Digital)
XPower 5000 Inverter
813-5000-UL
12 V
4000 W
10000 W
No
GFCI and/or Hardwire
Included (On/Off)
· Automatically sheds and re-engages loads to avoid the nuisance circuit breaker tripping
Freedom HF 1800
806-1840 12 V
1800 W
3600 W
GFCI and/or Hardwire
40 A
Included (Digital)
XM 1000
806-1010 12V 1000 W
2000 W
Yes
GFCI and/or Hardwire
Included (Digital)
Description
Part number
Product compatibility
Freedom 458-20
81-2010-12
12 V
2000 W
6000 W
Hardwire (single out) 100 A
Optional (LED)
XM 1800
806-1810 12V 1800 W
3600 W
Yes
GFCI and/or Hardwire
Included (Digital)
· Together with the Freedom SW Inverter/Charger, System Control Panel (SCP) and Automatic Generator Start
(AGS), the Freedom Sequence provides a complete integrated power management solution for RVs.
TRUECHARGE2 Remote Panel
808-8040-01
TRUECHARGE2 (part # 804-1220-02, 804-1240-02, 804-1260-02, 804-2410, 804-2420, 804-2430)
Freedom 458-25
81-2022-12
12 V
2000 W
6000 W
Hardwire (dual out)
100 A
Optional (LED)
Prowatt 250
801-3255 24 V 250 W
500 W
No
AC Outlet
No
· E nables you to monitor and control all the power components from a single, easy to use System Control Panel,
Battery Temperature Sensor 808-0232-01
TRUECHARGE2 (all applicable models)
Freedom 458-25 81-2530-12
12 V
2500 W
7500 W Hardwire 130 A
Optional (LED)
Prowatt 800
801-3853 24 V 800 W
2000 W
No
GFCI and/or Hardwire
Optional (On/Off)
Frequently Asked Questions
My story, my adventure, my passion,
Inverter FAQs
Q - What are the benefits of Multi-Stage
Battery Charging?
A - Advanced multi-stage battery chargers
ensure that batteries receive optimum charging,
with the delivery of an accurate three-stage
charge cycle. Three-stage charging results in
batteries charging faster and more effectively
than with a regular charger. This maximizes the
amount of time that full AC power is available
to the modern, electrically dependant vessel or
vehicle, and minimizes generator runtime.
Q - What inverter size do I need?
A - Choosing the right inverter size depends on
the power requirements of the electronics you
expect to operate at any given time. You should
consider both the continuous and surge power
rating of your electronic device or appliance.
Example: If you are going to operate 2 devices
at once, add up the total wattage of both
devices then add at least 50% more to account
for peaks or spikes in the power draw.
(1) Coffee Maker 1000 watts
(2) Portable Lights 200 watts
Recommended size of inverter:
1200 watts (1000 watts + 200 watts)
+ 600 watts (0.50 X 1200 watts) = 1800 watts
Q - What type of batteries should I use?
A - Xantrex recommends using only highquality deep-cycle batteries for inverter
applications. Deep-cycle batteries are designed
specifically for a deep discharge and a rapid
recharge. Do not use starting batteries for
inverter applications.
Q - How many batteries do I need ?
A - There are a few factors that need to be
considered before you determine the quantity
of batteries needed. First, consider the type of
battery you intend to use with your application.
Next, determine the size of the battery and
the number of amp hours you require between
charge cycles. Most people have a 400-450
amp-hour battery bank, but this depends on
use of your system.
Product Installation
TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2
Battery Charger FAQs
Q - What are the advantages of Power
Factor Corrected Charging (PFC)?
A - A charger’s power factor rating can be
explained as its ability to effectively use
incoming AC power. With less incoming AC
power required by the charger to operate at
its peak efficiency, there is more available AC
power for a microwave, TV and other AC loads
on the vessel or vehicle.
MY
Q - What is the difference between sine
wave & modified sine wave inverters?
A - True Sine Wave Inverters produce AC
power that is similar to power available
from the public utility grid system. They are
more expensive than comparable modified
sine wave inverters but they produce quality
output that operates even the most sensitive
and sophisticated electronics. True sine wave
should be your first choice. Modified Sine Wave
Inverters cost less but produce AC power that
is sufficient to run most electronics. Some
applications such as laser printer, fax machine,
satellite receiver and plasma television set
may not run properly with modified sine wave
power, or they may demand True sine wave.
Q - Do I need to install my inverter near
my batteries?
A - Ideally an inverter should be installed within
10 feet of the battery bank. If you increase this
distance, you will need to use thicker DC cables
to compensate for a drop in voltage and to avoid
increasing DC ripple (noise).
Q - Can I install my inverter/charger in
a gasoline engine compartment?
A - Currently Xantrex inverter/chargers are not
ignition protected and therefore should not be
installed in a gasoline engine compartment.
Q - What type of environmental conditions
must I consider when installing an
inverter/charger?
A - Most Xantrex inverter/chargers must be
installed in a dry, well-ventilated compartment.
While the units are designed to withstand
corrosion from salt and saturated air, they are
not splash-proof. The units also require a flow of
cool air to operate properly.
Q - What is automatic AC transfer switching?
A - All Xantrex inverter/chargers incorporate an
automatic transfer switch. This switch senses
when outside AC power is present and transfers
loads from the inverter to the source of incoming
power (shore or generator). This switch also
allows the charger to come on automatically
when connected to incoming AC power. Please
note that an inverter/charger can only invert or
charge, but cannot do both at the same time.
Wave Form Comparison
Q - Can I power my computer with an
inverter?
A - Both true sine wave and modified sine
wave inverter output will operate a computer.
However, some monitors and laser printers only
operate properly when powered by true sine
wave output.
Q - Is it possible to run an air conditioner
on an inverter?
A - Yes, it is possible to operate a small air
conditioner in the 5000-9000 BTU range using a
higher-powered inverter and battery bank with
the right capacity for power. Select an inverter
and battery combination that takes into account
the startup surge required by the air conditioner.
Let the Xantrex Tech Doctor Help you!
Check out our popular educational series “Tech Doctor” on www.xantrex.com to learn about common issues
pertaining to onboard AC power, installation and troubleshooting. The series is also available in video format
on our YouTube channel.
Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW
PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine
PRO Series XPower PowerPack PowerHubRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower
PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack
PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub
www.pinterest.com/xantrex
www.twitter.com/xantrex
www.youtube.com/xantrextechnology
Xantrex products provide in-vehicle AC
power to boats & RVs, work & utility
vehicles, heavy duty trucks and emergency
vehicles to operate tools, appliances, lights
and other electronic equipment wherever
they are needed.
components in a boat or RV’s electrical
system.
AC power is passed on to loads connected
to electrical circuits powered by the inverter.
The following illustrations show the Xantrex
Freedom SW System (Inverter/Charger,
System Control Panel and Automatic
Generator Start) along with other important
The length of time the inverter/charger can
supply AC power depends on the size of the
battery bank and the total average wattage
of loads drawing power.
In examples below, the inverter/charger
recharges the battery banks by converting
a portion of incoming shore power or utility
power to DC power. The rest of the incoming
When shore power is disconnected, an
internal transfer relay automatically
switches the inverter/charger from shore
power / charge mode to invert mode,
providing AC power from the battery banks
to the connected loads.
TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHubRUECHARGE2
Allan Warner - “I went to a RV parts dealer and asked
Tom Young - “Its quiet, it’s run everything that
Jim Kennif - “In fact, its worked everyday for the last
Freedom
SW PROwatt PROsine PRO Series
XPower PowerPack PowerHub
TRUECHARGE2 Freedom SW
them what brands they carry. I asked him about his
I have asked it to run including laser printers and
10 years without fail. Its never ever failed. And I don’t
opinionPROsine
which one lastsPRO
the longest,
and built
the best. PowerPack
computers. I never
had any problems
with it.
know about
you but when
I find aPROwatt
piece of equipment
PROwatt
Series
XPower
PowerHub
TRUECHARGE2
Freedom
SW
PROsine
And it was no question, he didn’t hesitate - XANTREX”
It has out-performed my expectations”
like that - that works that well, I stick with it”
Automatic Generator Start (AGS)
System Control Panel (SCP)
PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower
AC Out
PowerPack PowerHubRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub
AC Panel
DC -
TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2
DC +
Shunt
AC In
DC Fuse
LinkPRO Battery Monitor
Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW
Transfer Switch
PROwatt PROsine PRO Series XPower PowerPack PowerHubRUECHARGE2 Freedom SW PROwatt PROsine
Battery Temperature
Sensor
House Battery
PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower
Starting
Battery
PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub
Auxiliary Battery Charger
Generator
TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHubRUECHARGE2
Howard Testerman - “LOVE IT! It does what
Edward Price - “Thanks to my Xantrex, I can get to
David Mccutcheon - “The awesome part
a CPAP machine - it powers it, my microwave,
right into the wall. I don’t have any problems with it
generator power to invert power,
it takes care of the job for me”
have to buy another one”
UtilityPower
it’s supposed
- powers my laptops,
I have got PRO Series
keep chargeXPower
and stay maintained
and it just plugs
of it is that when you switchFreedom
from
Freedom
SWto PROwatt
PROsine
PowerPack
PowerHub TRUECHARGE2
SW
PROwatt PROsine
PRO
Series
XPower PowerPack
TRUECHARGE2
Freedom
PROsine
so about anything
I need
in my truck,
and I don’t know IPowerHub
said before, I probably
never will
there’s no lapse SW
in power.PROwatt
Its instant”
PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower
PowerPack PowerHubRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub
TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2
Water
Heater
AC Sub Panel
PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine
AC Main Panel
PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower
PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub
System Control Panel
Freedom Sequence Power Manager
Automatic Generator Start
Generator
Connect up to 4 DC control circuits
Engine Start Battery
TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2
Kim Dodds - “I have TRUECharge battery charger
Chad Jackson - “They take care of the product,
Bill Matley - “Top notch products - no need
Freedomin my
SW
PROwatt PROsine PRO Series
XPower PowerPack PowerHub for
TRUECHARGE2
Freedom SW
boat for the last 8 years and it has
stand behind it and always there for you”
support - they don’t break - doesn’t
workedPRO
incredibly
well” XPower PowerPack PowerHub TRUECHARGE2 Freedom
really
matter”PROwatt PROsine
PROwatt PROsine
Series
SW
Connect additional AC load
Washer & Dryer
Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW
Link PRO Battery Monitor
Thermostat
Shunt
Auxiliary Battery Charger
Xanbus
Air Conditioner
Transfer
Switch
Shore Power
House Battery Bank
Freedom SW Inverter/Charger
To XPower
learn more
and participate
in “My Xperience”
program,
visit www.xantrex.com.
PRO Series
PowerPack
PowerHubRUECHARGE2
Freedom
SW PROwatt
PROsine PRO Series XPower
PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub
Xantrex Customer Service / Technical Support
Toll Free - 1-800-670-0707
Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHubRUECHARGE2 Freedom SW PROwatt
Email - customerservice@xantrex.com
PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series
TRUECHARGE2 Freedom SW PROwatt PROsine PRO Series XPower PowerPack PowerHub TRUECHARGE2
www.xantrex.com
Smart choice for power
™
© 2014 Schneider Electric. All Rights Reserved. All trademarks owned by Schneider Electric Industries SAS or its affiliated companies.
www.xantrex.com