HFE4070-5021
High power
fibre optic LED
Features
Description
• High power LED
• Emitting window diameter 50 um
• With ball-lens
• Designed to operate with
Honeywell fibre optic receivers
• Mounting options
SMA single hole
ST single hole
SMA PCB
ST PCB
SMA 4 hole
The HFE4070-5021 is a high radiance GaAlAs 850 nanometer LED
optimized for coupling into small fibre core diameters at a forward current of
up to 80 mA. The peak wavelength is matched for use with Honeywell
silicon fibre optic detectors and receivers.
Typical applications
The HFE4070-5021 LED is packaged in a fibre optic connector that aligns
the optical axis of the base component to the axis of the optical fibre. Data
rates can vary from dc to above 40 MHz depending upon component
application. The LED converts electrical current into optical power that can
be used in fibre optic communications. As the current varies (typically from
10 mA to 80 mA), the light intensity increases proportionally.
The HFE4070-5021 LED provides the maximum amount of radiance for the
amount of forward current in the industry. A 0,55 mm diameter glass
microlens over the “Caprock”™ junction collimates the light, increasing the
intensity. Thus, greater power is directed toward standard fibre optic cables.
• Linear and rotary encoders
(measuring systems)
• Edge sensing (coin dispenser)
• Optical communications
!
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop devices, or in
any other application where failure of the product could result in personal
injury.
Failure to comply with these instructions could result in death or
serious injury.
!
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet (or catalogue) is for
reference only. DO NOT USE this document as product installation
information.
• Complete installation, operation and maintenance information is provided
in the instructions supplied with each product.
Failure to comply with these instructions could result in death or
serious injury.
Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HFE4070 Series Fibre Optic LED
Technical information
Absolute maximum ratings (Ta = 25 °C)
1.
2.
Symbol
Ratings
Forward current (dc)
IF
80 mA
Forward current (pulse) 1
IFP
0.4 A
Reverse voltage
VR
5V
Power dissipation
PD
150 mW
Operating temperature
Topr
-30 °C to 100 °C
Storage temperature
Tstg
-40 °C to 125 °C
Junction temperature
Tj
125 °C
Lead soldering temperature 2
Tls
260 °C
Tw = 10 us, T = 10 ms
Time 5 sec max., position up to 3 mm from the body
Mounting dimensions (in millimetres)
2 Honeywell • Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HFE4070 Series Fibre Optic LED
Technical information
Electrical and Optical Characteristics (Ta = 25 °C)
Symbol
Conditions
Min.
Typ.
Power output
PO
IF = 50 mA
2.5mW
3.5 mW
Forward voltage
VF
IF = 50 mA
Reverse current
IR
VR = 5 V
Peak wavelength
λp
IF = 50 mA
λ
IF = 50 mA
40 nm
Spectral line half width
1.9 V
2.4 V
10 uA
850 nm
880 nm
Half intensity beam angle
Θ
IF = 50 mA
± 6°
Bandwidth
fc
IF = 50 mA + 20 mA p-p
20 MHz
Junction capacitance
cj
1 MHz, V = 0 V
40 pF
Temperature coefficient of PO
P/T
IF = 10 mA
-0.05 %/°C
Temperature coefficient of VF
V/T
IF = 10 mA
-2.3 mV/°C
1
Pf
IF = 50 mA
600 uW
Fibre coupled power 2
Pf
IF = 50 mA
20 uW
Fibre coupled power
2.
200/230 NA = 0.4
Measured with 50/125 um optical fibre
FORWARD I-V CHARACTERISTICS
SPECTRAL OUTPUT
100
80
60
40
20
0
0
1
2
200
150
100
50
0
0
3
FORWARD VOLTAGE (V)
120
RADIATION PATTERN
RELATIVE POWER vs FORWARD CURRENT
250
RELATIVE POWER OUTPUT (%)
)
FORWARD
CURRENT (mA)
120
20
40
60
80
100
RELATIVE POWER OUTPUT (%)
1.
120
100
80
60
40
20
0
-90
FORWARD CURRENT (mA)
-60
-30
0
30
60
90
BEAM ANGLE (deg.)
100
POWER OUTPUT vs TEMPERATURE
IF=10mA
THERMAL DERATING CURVE
60
40
20
0
780
880
WAVELENGTH(nm)
980
100
80
60
40
20
0
-40 -20 0 20 40 60 80 100 120
AMBIENT TEMPERATURE (˚C)
RELATIVE POWER OUTPUT (%)
120
FORWARD VOLTAGE vs TEMPERATURE
IF=10mA
3
140
120
FORWARD VOL
TAGE (V)
80
FORWARD CURRENT (mA)
RELATIV POWER OUTPUT (%)
Max.
100
80
60
40
20
0
-40 -20 0 20 40 60 80 100 120
AMBIENT TEMPERATURE (˚C)
2.5
2
1.5
1
0.5
0
-40 -20 0 20 40 60 80 100 120
AMBIENT TEMPERATURE (˚C)
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Warranty/Remedy
Sales and Service
Honeywell warrants goods of its manufacture as being free of
defective material and faulty workmanship. Contact your local sales
office for warranty information. If warranted goods are returned to
Honeywell during that period of coverage, Honeywell will repair or
replace without charge those items it finds defective. The foregoing is
Buyer’s sole remedy and is in lieu of all other warranties,
expressed or implied, including those of merchantability and
fitness for a particular purpose.
While we provide application assistance, personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change at any time without notice. The
information we supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
Honeywell serves its customers through a worldwide network of
sales offices and distributors. For application assistance, current
specifications, pricing or name of the nearest Authorised Distributor,
contact your local sales office or:
ASIA PACIFIC
Control Products
Asia Pacific Headquarters
Phone: +(65) 6355-2828
Fax: +(65) 6445-3033
Australia
Honeywell Limited
Phone: +(61) 2-9370-4500
FAX: +(61) 2-9370-4525
Toll Free 1300-36-39-36
Toll Free Fax: 1300-36-04-70
China – PRC - Beijing
Honeywell China Inc.
Phone: +(86-10) 8458-3280
Fax: +(86-10) 8458-3102
China – PRC - Shanghai
Honeywell China Inc.
Phone: (86-21) 6237-0237
Fax: (86-21) 6237-1237
China - Hong Kong S.A.R.
Honeywell Ltd.
Phone: +(852) 2953-6412
Fax: +(852) 2953-6767
Indonesia
Honeywell Indonesia Pte Ltd.
Phone: +(62) 21-535-8833
FAX: +(62) 21-5367 1008
India
TATA Honeywell Ltd.
Phone: +(91) 20 6870 445/
446
Fax: +(91) 20 681 2243/ 687
5992
South Korea
Honeywell Korea Co Ltd
Phone: +(822) 799-6167
Fax: +(822) 792-9013
Malaysia
Honeywell Engineering Sdn
Bhd
Phone: +(60-3) 7958-4988
Fax: +(60-3) 7958-8922
New Zealand
Honeywell Limited
Phone: +(64-9) 623-5050
Fax: +(64-9) 623-5060
Toll Free (0800) 202-088
Philippines
Honeywell Systems
(Philippines) Inc.
Phone: +(63-2) 636-1661 /
1662
Fax: +(63-2) 638-4013
Singapore
Honeywell South East Asia
Phone: +(65) 6355-2828
Fax: +(65) 6445-3033
Thailand
Honeywell Systems (Thailand)
Ltd.
Phone: +(662) 693-3099
FAX: +(662) 693-3085
Taiwan R.O.C.
Honeywell Taiwan Ltd.
Phone: +(886-2) 2245-1000
FAX: +(886-2) 2245-3242
EUROPE
Austria
Honeywell Austria GmbH
Phone: +(43) 1 727 80 366/
246
FAX: +(43) 1 727 80 337
Belgium
Honeywell SA/NV
Phone: +(32) 2 728 2522
FAX: +(32) 2 728 2502
Bulgaria
Honeywell EOOD
Phone: +(359) 2 79 40 27
FAX: +(359) 2 79 40 90
Czech Republic
Honeywell spol. s.r.o.
Phone: +(420) 2 6112 3469/
3424
FAX: +(420) 2 6112 3461
Denmark
Honeywell A/S
Phone: +(45) 39 55 55 55
FAX: +(45) 39 55 55 58
Finland
Honeywell OY
Phone: +(358) 9 3480101
FAX: +(358) 9 34801375
France
Honeywell SA
Phone: +(33) 1 60 19 80 40
FAX: +(33) 1 60 19 81 73
Germany
Honeywell AG
Phone: +(49) 69 8064 444
FAX: +(49) 69 8064 442
Japan
Honeywell Inc
Phone: +(81) 3 5440 1425
Fax: +(81) 3 5440 1368
Hungary
Honeywell Kft.
Phone: +(36 1) 451 4300
FAX: +(36 1) 451 4343
E-MAIL: info.sc@honeywell.com
INTERNET: www.honeywell.com/sensing
Italy
Honeywell S.p.A.
Phone: +(39) 02 92146 450/
456
FAX: +(39) 02 92146 490
The Netherlands
Honeywell B.V.
Phone: +(31) 20 565 69 11
FAX: +(31) 20 565 66 00
Norway
Honeywell A/S
Phone: +(47) 66 76 20 00
FAX: +(47) 66 76 20 90
Poland
Honeywell Sp. zo.o
Phone: +(48) 22 606 0900
FAX: +(48) 22 606 0901
Portugal
Honeywell Portugal Lda
Phone: +(351 21) 424 50 00
FAX: +(351 21) 424 50 99
Romania
Honeywell Bucharest
Phone: +(40) 1 2110076
FAX: +(40) 1 2103375
Commonwealth of
Independent States (CIS)
Z.A.O. Honeywell
Phone: +(7 095) 796 98 36
FAX: +(7 095) 796 98 93
Slovak Republic
Honeywell s.r.o.
Phone: +(421 7) 58247 403/
400
FAX: +(421 7) 58247 415
South Africa (Republic of)
Honeywell Southern Africa
Honeywell S.A. Pty. Ltd
Phone: +(27) 11 695 8000
FAX +(27) 11 805 1504
Spain
Honeywell S.A.
Phone: +(34) 91 313 6100
FAX: +(34) 91 313 6129
Sweden
Honeywell AB
Phone: +(46) 8 775 55 00
FAX: +(46) 8 775 56 00
Switzerland
Honeywell AG
Phone: +(41) 1 855 24 40
FAX: +(41) 1 855 24 45
Turkey
Honeywell Turkey A.S.
Phone: +(90) 216 5756620
FAX: +(90) 216 5756637
United Kingdom
Honeywell Control Systems
Ltd
Phone: +(44) 1698 481481
FAX: +(44) 1698 481276
Mediterranean & African
Distributors
Honeywell SpA
Phone: +(39) 2 921 46 232
FAX: +(39) 2 921 46 233
Middle East Headquarters
Honeywell Middle East Ltd.
Phone: +(9712) 443 2119
FAX +(9712) 443 2536
NORTH AMERICA
Canada
Honeywell LTD
Phone: 1-800-737-3360
FAX: 1-800-565-4130
LATIN AMERICA
Argentina
Honeywell S.A.I.C.
Phone: +(54-11) 4383-3637
FAX: +(54-11) 4325-6470
Brazil
Honeywell do Brasil & Cia
Phone: +(55-11) 7266-1900
FAX: +(55-11) 7266-1905
Chile
Honeywell Chile, S.A.
Phone: +(56-2) 233-0688
FAX: +(56-2) 231-6679
Columbia
Honeywell Columbia, S.A.
Phone: +(57-1) 623-3239/
3051
FAX: +(57-1) 623-3395
Ecuador
Honeywell S.A.
Phone: +(593-2) 981-560/1
FAX: +(593-2) 981-562
Mexico
Honeywell S.A. de C.V.
Phone: +(52) 55 5259-1966
FAX: +(52) 55 5570-2985
Puerto Rico
Honeywell Inc.
Phone: +(809) 792-7075
FAX: +(809) 792-0053
Venezuela
Honeywell CA
Phone: +(58-2) 238-0211
FAX: +(58-2) 238-3391
USA
Honeywell
Control Products,
International Headquarters
Phone: 1-800-537-6945
1-815-235-6847
FAX: 1-815-235-6545
E-mail:
info.sc@honeywell.com
This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the customer’s
responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on request.
© Honeywell 2003. All rights reserved.
Sensing and Control
www.honeywell.com/sensing
Honeywell
Newhouse Industrial Estate
Motherwell, Lanarkshire ML1 5SB
Scotland, UK
100460-EN Issue 1
03/03
UK07
GLO
Printed in the United Kingdom on environmentally friendly paper
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Wide Gap Transmissive Sensor
HOA1888 Series
FEATURES
• Choice of phototransistor or
photodarlington output
• Visible ambient light and dust
protective filter
• 12 mm (0.47 in.) slot width
• Snap-in housing
The HOA1888 Series consists of an infrared emitting diode facing an
NPN silicon phototransistor (HOA1888-011) or photodarlington
(HOA1888-013) encased in a black thermoplastic housing. Detector
switching takes place whenever an opaque object passes through the
slot between emitter and detector. Both emitter and detector have 1,52
mm (0.060 in.) x 1,52 mm (0.060 in.) vertical apertures.
The sensor housing contains IR (Infrared) transmissive optical
windows. This arrangement provides excellent protection against visible
ambient light while eliminating aperture openings which could be
clogged by airborne contaminants.
Housing material is polycarbonate. Housings are soluble in
chlorinated hydrocarbons and ketones. Recommended cleaning agents
are methanol and isopropanol.
Honeywell Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Wide Gap Transmissive Sensor
HOA1888 Series
ABSOLUTE MAXIMUM RATINGS (25°C free-air temperature unless
otherwise noted)
Operating Temperature Range
-40°C to 85°C
Storage Temperature Range
-40°C to 85°C
Soldering Temperature (5 sec)
240°C
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
IR EMITTER
Power Dissipation
100 mW
Reverse Voltage
3V
Continuous Forward Current
50 mA
(1)
DETECTOR
TRANSISTOR
DARLINGTON
Collector-Emitter Voltage
30 V
15 V
Emitter Collector Voltage
5V
Power Dissipation
100 mW
5V
(1)
100 mW
Collector DC Current
30 mA
Note:
1. Derate linearly at 0.78 mW/°C above 25°C.
(1)
30 mA
ELECTRICAL CHARACTERISTICS (25°C unless otherwise noted)
Parameter
Symbol
Min
Typ
Max
Unit
Test Condition
IR EMITTER
Forward Voltage
VF
1.6
V
IF=20 mA
Reverse Leakage Current
IR
10
µA
VR=3 V
V
IC=100 µA
DETECTOR
Collector-Emitter Breakdown Voltage
HOA1888-011
HOA1888-013
V(BR)CEO
Emitter-Collector Breakdown Voltage
V(BR)ECO
Collector Dark Current
HOA1888-011
HOA1888-013
30
15
5.0
ICEO
V
IE=100 µA
nA
VCE=10 V
IF=0
mA
VCE=5 V
IF=20 mA
V
IF=20 mA
IC=60 µA
100
250
COUPLED CHARACTERISTICS
On-State Collector Current
HOA1888-011
HOA1888-013
Collector-Emitter Saturation Voltage
HOA1888-011
HOA1888-013
Rise And Fall Time
HOA1888-011
HOA1888-013
2 Honeywell •Sensing and Control
IC(ON)
0.5
2.0
VCE(SAT)
0.4
1.1
IC=250 µA
µs
tr , t f
15
75
VCC=5 V, IC=1 mA
RL=1000 Ω
RL=100 Ω
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Wide Gap Transmissive Sensor
HOA1888 Series
SCHEMATIC
Figure 2: Non-saturated Switching Time vs Load
Resistance
1000
100
90
80
70
60
50
40
30
20
10
0
Pulsed
condition
Response time - µs
Forward current - mA
Figure 1: IRED Forward Bias Characteristics
TA = 80 °C
TA = 25 °C
TA = -40 °C
100
Photodarlington
10
Phototransistor
1
0.8
1.0
1.2
1.4
1.6
1.8
10
2.0
1000
10000
Load resistance - Ohms
Forward voltage - V
Figure 4: Collector Current vs Ambient
Temperature
Normalized collector current
Figure 3: Detector Dark Current vs Temperature
100
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-50
-25
0
25
50
75
100
Free-air temperature - °C
For application help: call 1-800-537-6945
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Wide Gap Transmissive Sensor
HOA1888 Series
ORDER GUIDE
Catalog Listing
Description
HOA1888-011
Wide Gap Transmissive Sensor, Phototransistor
HOA1888-013
Wide Gap Transmissive Sensor, Photodarlington
RECOMMENDED PCB MOUNTING HOLE
DIMENSIONS mm (in.)
35 (1.378)
11,5 (.453)
12 (.472)
6,9 (.271)
5,5 (.216)
3,8 (.150) OPTICAL C L
13 (.512)
10 (.394) OPTICAL C L
3,3 (.13) 5X
4,4 (.173)
29 ± .1 (1.142)
2,54 (.100)
3 (.118)
1
2
4
(5X) 1,0 (.04) dia.
(2X) 2,8 (.110) dia.
0,7 (.027)
3,6 (.142)
3 (.118)
3
2,54 (.100) (2X)
OUTLINE DIMENSIONS mm (in.) (for reference only)
19,4 (.764)
3,8 ± .1 (.150)
12 (.472)
2,8 (.110)
1,4 (.055)
(2x) 4,8 (.189)
(2X) 19,4 (.764)
29 (1.142)
LEADS:
1. ANODE
3. EMITTER
2. CATHODE 4. COLLECTOR
2x 7,8 ±.1 (.307)
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as
being free of defective material and faulty
workmanship. Contact your local sales office for
warranty information. If warranted goods are
returned to Honeywell during that period of
coverage, Honeywell will repair or replace without
charge those items it finds defective. The foregoing
is Buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including
those of merchantability and fitness for a
particular purpose.
While we provide application assistance,
personally, through our literature, and through the
Honeywell website, it is up to the customer to
determine the suitability of the product in the
application.
Specifications may change at any time without
notice. The information we supply is believed to be
accurate and reliable as of this printing. However,
we assume no responsibility for its use.
SALES AND SERVICE
MICRO SWITCH Sensing and Control serves its
customers through a worldwide network of sales
offices and distributors. For application assistance,
current specifications, pricing or name of the
nearest Authorized Distributor, contact a nearby
sales office or call:
TELEPHONE
1-800-537-6945 (USA)
1-800-737-3360 (Canada)
1-815-235-6847 (International)
FAX
1-815-235-6545 (USA)
INTERNET
www.honeywell.com/sensing
info@micro.honeywell.com
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
www.honeywell.com/sensing
006455-1-EN IL50 GLO 1298 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Dual Channel Transmissive Sensor
HOA1889 Series
FEATURES
• Choice of phototransistor or
photodarlington output
• PCB mount package
• Polarized locator pins
• Accurate position sensing
• 0,5 mm (0.020 in.) aperture
windows
• 1,78 mm (0.070 in.) slot width
• Available in shipping tubes
The HOA1889 Series consists of two infrared emitting diodes facing
two NPN silicon phototransistors (HOA1889-011) or two photodarlington
transistors (HOA1889-013) encased in a black thermoplastic housing.
Detector switching takes place whenever an opaque object passes
through the slot between the the emitter and the detector. The dual
channels allow both the speed and the direction of the interrupter to be
sensed. Emitters and detectors have a 0,5 mm (0.020 in.) vertical
aperture. This feature is ideal for use in applications in which high
position resolution is desired.
The sensor housing is an opaque thermoplastic with aperture
openings for use in applications in which maximum rejection of ambient
light is important and maximum position resolution is desired. The
HOA1889 Series contains plastic molded components. For additional
component information see SEP8506, SDP8406, and SDP8106.
Housing material is Valox. Housings are soluble in chlorinated
hydrocarbons and ketones. Recommended cleaning agents are
methanol and isopropanol.
Valox is a registered trademark of General Electric Company.
Honeywell Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Dual Channel Transmissive Sensor
HOA1889 Series
ABSOLUTE MAXIMUM RATINGS (25°C free-air temperature unless
otherwise noted)
Operating Temperature Range
-40°C to 85°C
Storage Temperature Range
-40°C to 85°C
Soldering Temperature (5 sec)
240°C
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
IR EMITTER
Power Dissipation
100 mW
Reverse Voltage
3V
Continuous Forward Current
50 mA
(1)
DETECTOR
TRANSISTOR
DARLINGTON
Collector-Emitter Voltage
30 V
15 V
Emitter Collector Voltage
5V
Power Dissipation
100 mW
5V
(1)
100 mW
Collector DC Current
30 mA
Note:
1. Derate linearly at 0.78 mW/°C above 25°C.
(1)
30 mA
ELECTRICAL CHARACTERISTICS (25°C unless otherwise noted)
Parameter
Symbol
Min
Typ
Max
Unit
Test Condition
IR EMITTER (each)
Forward Voltage
VF
1.6
V
IF=20 mA
Reverse Leakage Current
IR
10
µA
VR=3 V
V
IC=100 µA
DETECTOR (each)
Collector-Emitter Breakdown Voltage
HOA1889-011
HOA1889-013
V(BR)CEO
Emitter-Collector Breakdown Voltage
V(BR)ECO
Collector Dark Current
HOA1889-011
HOA1889-013
30
15
5.0
ICEO
V
IE=100 µA
nA
VCE=10 V
IF=0
mA
VCE=5 V
IF=20 mA
V
IF=20 mA
IC=40 µA
100
250
COUPLED CHARACTERISTICS
On-State Collector Current
HOA1889-011
HOA1889-013
Collector-Emitter Saturation Voltage
HOA1889-011
HOA1889-013
Rise And Fall Time
HOA1889-011,
HOA1889-013
2 Honeywell • Sensing and Control
IC(ON)
0.5
2.0
VCE(SAT)
0.4
1.1
IC=250 µA
µs
tr , t f
15
75
VCC=5 V, IC=1 mA
RL=1000 Ω
RL=100 Ω
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Dual Channel Transmissive Sensor
HOA1889 Series
SCHEMATIC
4
5
3
6
2
7
1
8
Figure 2: Non-saturated Switching Time vs Load
Resistance
1000
100
90
80
70
60
50
40
30
20
10
0
Pulsed
condition
Response time - µs
Forward current - mA
Figure 1: IRED Forward Bias Characteristics
TA = 80 °C
TA = 25 °C
TA = -40 °C
100
Photodarlington
10
Phototransistor
1
0.8
1.0
1.2
1.4
1.6
1.8
10
2.0
1000
10000
Load resistance - Ohms
Forward voltage - V
Figure 4: Collector Current vs Ambient
Temperature
Normalized collector current
Figure 3: Detector Dark Current vs Temperature
100
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-50
-25
0
25
50
75
100
Free-air temperature - °C
For application help: call 1-800-537-6945
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Dual Channel Transmissive Sensor
HOA1889 Series
ORDER GUIDE
Catalog Listing
Description
HOA1889-011
Dual Channel Transmissive Sensor, Phototransistor
HOA1889-013
Dual Channel Transmissive Sensor, Photodarlington
13,39
(.527)
OUTLINE DIMENSIONS mm/(in.)
(for reference only)
Leads
1. Anode 1
2. Cathode 1
3. Anode 2
4. Cathode 2
5. Collector 2
7. Collector 1
6. Emitter 2
8. Emitter 1
2,54
(.100)
5,08
(.200)
10,16
(.400)
5
6
10,92
(.430)
1,02
(.040)
14,55
(.573)
8,88
(.350)
8
7
5,08
(.200)
.1,27
(.050)
9,84
(.388)
4
2
3
1
2x Ø1,02
(.040)
13,45
(.533)
3,18
(.125)
2.0°
3,3
(.130)
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being
free of defective material and faulty workmanship.
Contact your local sales office for warranty information. If
warranted goods are returned to Honeywell during that
period of coverage, Honeywell will repair or replace
without charge those items it finds defective. The
foregoing is Buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including
those of merchantability and fitness for a particular
purpose.
While we provide application assistance, personally,
through our literature, and through the Honeywell
website, it is up to the customer to determine the
suitability of the product in the application.
Specifications may change at any time without notice.
The information we supply is believed to be accurate and
reliable as of this printing. However, we assume no
responsibility for its use.
3,45
(.136)
7,62
(.300)
SALES AND SERVICE
MICRO SWITCH Sensing and Control serves its
customers through a worldwide network of sales offices
and distributors. For application assistance, current
specifications, pricing or name of the nearest Authorized
Distributor, contact a nearby sales office or call:
TELEPHONE
1-800-537-6945 (USA)
1-800-737-3360 (Canada)
1-815-235-6847 (International)
FAX
1-815-235-6545 (USA)
INTERNET
www.honeywell.com/sensing
info@micro.honeywell.com
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
www.honeywell.com/sensing
006457-1-EN IL50 GLO 1298 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Wide Gap Transmissive Optoschmitt Sensor
HOA2006 Series
FEATURES
• Direct TTL interface
• Buffer logic
• Visible ambient light and dust
protective filter
• 12 mm (0.47 in.) slot width
• Snap-in housing
The HOA2006 consists of an infrared emitting diode facing an
Optoschmitt detector encased in a black thermoplastic housing. The
photodetector consists of a photodiode, amplifier, voltage regulator,
schmitt trigger, and an NPN output transistor with a 10 K ohm (nominal)
pull-up resistor. The buffer logic provides a high output when the optical
path is clear, and a low output when the path is blocked. Both emitter
and detector have 1,52 mm (0.060 in.) x 1,52 mm (0.060 in.) vertical
apertures.
The sensor housing contains IR (Infrared) transmissive optical
windows. This arrangement provides excellent protection against visible
ambient light while eliminating aperture openings which could be
clogged by airborne contaminants.
Housing material is polycarbonate. Housings are soluble in
chlorinated hydrocarbons and ketones. Recommended cleaning agents
are methanol and isopropanol.
Honeywell Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Wide Gap Transmissive Optoschmitt Sensor
HOA2006 Series
ABSOLUTE MAXIMUM RATINGS (25°C free-air temperature unless
otherwise noted)
Operating Temperature Range
-40°C to 70°C
Storage Temperature Range
-40°C to 85°C
Soldering Temperature (5 sec)
240°C
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
IR EMITTER
Power Dissipation
100 mW
Reverse Voltage
3V
Continuous Forward Current
50 mA
(1)
DETECTOR
(2)
Supply Voltage
12 V
Output Sink Current
18 mA
Duration of Output Short to V CC or
Ground
1.0 sec.
Notes:
1. Derate linearly at 0.78 mW/°C above 25°C.
2. Derate linearly from 25°C to 5.5 V at 70°C.
ELECTRICAL CHARACTERISTICS (25°C unless otherwise noted)
Parameter
Symbol
Min
Typ
Max
Unit
Test Condition
IR EMITTER
Forward Voltage
VF
1.7
V
IF=20 mA
Reverse Leakage Current
IR
10
µA
VR=3 V
DETECTOR
Operating Supply Voltage
VCC
4.5
12
V
Low Level Supply Current
ICCL
4.0
12
mA
5.0
15
2.0
10
3.0
12
High Level Supply Current
ICCH
Low Level Output Voltage
VOL
High Level Output Voltage
VOH
(1)
VCC=12 V
mA
VCC=5 V
VCC=12 V
0.4
2.4
VCC=5 V
V
IOL=12.8 mA, IF=0 mA
V
IOH=0, IF=20 mA
Hysteresis
HYST
10
%
Propagation Delay
tPLH, tPHL
5
µs
VCC=5 V, IF=20 mA
Rise Time
tr
60
ns
RL=390 Ω, CL=50 pF
Fall Time
tf
15
ns
RL=390 Ω, CL=50 pF
Low-High, High-Low
COUPLED CHARACTERISTICS
IRED Trigger Current
IFT
20
mA
VCC=5 V
Notes:
*Add a bypass capacitor, 0.1 µF typical, between V CC and GND near the device in order to stabilize the power supply
line.
1. Hysteresis is defined as the difference between the operating and release threshold intensities, expressed as a
percentage of the operate threshold intensity.
2 Honeywell • Sensing and Control
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Wide Gap Transmissive Optoschmitt Sensor
SCHEMATIC
HOA2006 Series
(2X) 1,27 (.05)
(2X) 2,54 (.100)
RECOMMENDED PCB MOUNTING HOLE
DIMENSIONS mm (in.)
(5X) 0,1 (.04) dia.
(2X) 3,2 ± 0.1 (.127) dia.
2 (.079)
4,8 (2x) (.189)
(2X) 19,4 (.764)
29 (1.142)
OUTLINE DIMENSIONS mm (in.) (for reference only)
35 (1.378)
11,5 (.453)
12 (.472)
6,9 (.271)
5,5 (.216)
3,8 (.150) OPTICAL C
L
13 (.512)
3 (.118)
10 (.394) OPTICAL C L
3,3 (.13) 5X
4,4 (.173)
0,7 (.027)
3,6 (.142)
2,8 (.110)
29 ± .1 (1.142)
3 (.118)
LEADS:
1. ANODE
2. CATHODE
3. VO
1,27 (.050)
4
1
3
2,54 (.100)
2
5
12 (.472)
1,4 (.055)
4. GND
5. VCC
3,8 ± .1(.150)
2 ± .1(.079)
19,4 (.764)
For application help: call 1-800-537-6945
2x 7,8 ± .1 (.307)
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Wide Gap Transmissive Optoschmitt Sensor
HOA2006 Series
ORDER GUIDE
Catalog Listing
Description
HOA2006-001
Wide Gap Transmissive Optoschmitt Sensor
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as
being free of defective material and faulty
workmanship. Contact your local sales office for
warranty information. If warranted goods are
returned to Honeywell during that period of
coverage, Honeywell will repair or replace without
charge those items it finds defective. The foregoing
is Buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including
those of merchantability and fitness for a
particular purpose.
While we provide application assistance,
personally, through our literature, and through the
Honeywell website, it is up to the customer to
determine the suitability of the product in the
application.
Specifications may change at any time without
notice. The information we supply is believed to be
accurate and reliable as of this printing. However,
we assume no responsibility for its use.
SALES AND SERVICE
MICRO SWITCH Sensing and Control serves its
customers through a worldwide network of sales
offices and distributors. For application assistance,
current specifications, pricing or name of the
nearest Authorized Distributor, contact a nearby
sales office or call:
TELEPHONE
1-800-537-6945 (USA)
1-800-737-3360 (Canada)
1-815-235-6847 (International)
FAX
1-815-235-6545 (USA)
INTERNET
www.honeywell.com/sensing
info@micro.honeywell.com
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
www.honeywell.com/sensing
006456-1-EN IL50 GLO 1298 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Dual Channel Transmissive Optoschmitt Sensor
HOA2007 Series
FEATURES
• Direct TTL interface
• Two channel operation
• Buffer logic
• PCB mount package
• Polarized locator pins
• Accurate position sensing
• 0,5 mm (0.020 in.) aperture
windows
• 1,78 mm (0.070 in.) slot width
• Available in shipping tubes
The HOA2007 Series consists of two infrared emitting diodes facing
two Optoschmitt detectors encased in a black thermoplastic housing.
The photodetector consists of a photodiode, amplifier, voltage regulator,
schmitt trigger and an NPN phototransistor with a 10 kΩ (nominal) pullup resistor. Detector switching takes place whenever an opaque object
passes through the slot between the emitter and the detector. The
buffer logic provides a high output when the optical path is clear. The
dual channels allow both the speed and the direction of the interrupter to
be sensed. Emitters and detectors have a 0,5 mm (0.020 in.) vertical
aperture. This feature is ideal for use in applications in which high
position resolution is desired.
The sensor housing is an opaque thermoplastic with aperture
openings for use in applications in which maximum rejection of ambient
light is important and maximum position resolution is desired. The
HOA2007 series contains plastic molded components. For additional
component information see SEP8506 and SDP8601.
Housing material is Valox. Housings are soluble in chlorinated
hydrocarbons and ketones. Recommended cleaning agents are
methanol and isopropanol.
Valox is a registered trademark of General Electric Company.
Honeywell Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Dual Channel Transmissive Optoschmitt Sensor
HOA2007 Series
ABSOLUTE MAXIMUM RATINGS (25°C free-air temperature unless
otherwise noted)
Operating Temperature Range
-40°C to 70°C
Storage Temperature Range
-40°C to 85°C
Soldering Temperature (5 sec)
240°C
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
IR EMITTER
Power Dissipation
100 mW
Reverse Voltage
3V
Continuous Forward Current
50 mA
(1)
DETECTOR
(2)
Supply Voltage
12 V
Output Sink Current
18 mA
Duration of Output Short to V CC or
Ground
1.0 sec
Notes:
1. Derate linearly at 0.78 mW/°C above 25°C.
2. Derate linearly from 25°C to 5.5 V at 70°C.
ELECTRICAL CHARACTERISTICS (25°C unless otherwise noted)
Parameter
Symbol
Min
Typ
Max
Unit
Test Condition
IR EMITTER (each)
Forward Voltage
VF
1.6
V
IF=20 mA
Reverse Leakage Current
IR
10
µA
VR=3 V
DETECTOR (each)
Operating Supply Voltage
VCC
4.5
12
V
Low Level Supply Current
ICCL
4.0
12
mA
5.0
15
2.0
10
3.0
12
High Level Supply Current
ICCH
Low Level Output Voltage
VOL
High Level Output Voltage
VOH
(1)
0.4
2.4
VCC=5 V
VCC=12 V
mA
VCC=5 V
VCC=12 V
V
IOL=12.8 mA, IF=0 mA
V
IOH=0, IF=20 mA
Hysteresis
HYST
10
%
Propagation Delay
tPLH, tPHL
5
µs
VCC=5 V, IF=20 mA
Rise Time
tr
60
ns
RL=390 Ω, CL=50 pF
Fall Time
tf
15
ns
RL=390 Ω, CL=50 pF
Low-High, High-Low
COUPLED CHARACTERISTICS
IRED Trigger Current, HOA2007-001
IFT
20
mA
VCC=5 V
Notes:
*Add a bypass capacitor, 0.1 µF typical, between VCC and GND near the device in order to stabilize the power supply
line.
1. Hysteresis is defined as the difference between the operating and release threshold intensities, expressed as a
percentage of the operate threshold intensity.
2 Honeywell • Sensing and Control
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Dual Channel Transmissive Optoschmitt Sensor
HOA2007 Series
SCHEMATIC
SWITCHING WAVEFORM
Figure 1
IRED Forward Bias Characteristics
Figure 2
IRED Trigger Current vs Temperature
For application help: call 1-800-537-6945
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Dual Channel Transmissive Optoschmitt Sensor
HOA2007 Series
ORDER GUIDE
Catalog Listing
Description
HOA2007-001
Dual Channel Transmissive Optoschmitt Sensor
13,39
(.527)
OUTLINE DIMENSIONS mm/(in.)
(for reference only)
Leads
1. Anode 1
2. Cathode 1
3. Anode 2
4. Cathode 2
5. Vcc 2
6. Vo 2
7. Gnd 2
8. Vcc 1
9. Vo 1
10. Gnd 1
2,54
(.100)
4X 1,27
(.050)
5,08
(.200)
10,16
(.400)
5
6
7
10,92
(.430)
1,02
(.040)
14,55
(.573)
8
9
8,88
(.350)
10
1,27 (.050)
5,08
(.200)
9,84
(.388)
4
2
3
1
1,27
(.050)
2x Ø1,02
( .040)
13,54
(.533)
3,18
(.125)
2.0°
3,3
130
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being
free of defective material and faulty workmanship.
Contact your local sales office for warranty information. If
warranted goods are returned to Honeywell during that
period of coverage, Honeywell will repair or replace
without charge those items it finds defective. The
foregoing is Buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including
those of merchantability and fitness for a particular
purpose.
While we provide application assistance, personally,
through our literature, and through the Honeywell
website, it is up to the customer to determine the
suitability of the product in the application.
Specifications may change at any time without notice.
The information we supply is believed to be accurate and
reliable as of this printing. However, we assume no
responsibility for its use.
3,45
(.136)
7,62
(.300)
SALES AND SERVICE
MICRO SWITCH Sensing and Control serves its
customers through a worldwide network of sales offices
and distributors. For application assistance, current
specifications, pricing or name of the nearest Authorized
Distributor, contact a nearby sales office or call:
TELEPHONE
1-800-537-6945 (USA)
1-800-737-3360 (Canada)
1-815-235-6847 (International)
FAX
1-815-235-6545 (USA)
INTERNET
www.honeywell.com/sensing
info@micro.honeywell.com
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
www.honeywell.com/sensing
006458-1-EN IL50 GLO 1298 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Products
Single Fiber Duplex Modules
FEATURES
• Full duplex over single
fiber
• DC to 160 MHz link
bandwidth
• Link budgets of 2 km [1.24
miles] or greater
• 40 dB isolation
• Low profile ST housing
• Other options available
• VCSEL is Class 1 eye safe
APPLICATIONS
• Full duplex data
transmission
• Multiplexing two signals to
a single fiber
• LED coupled power
measurements and reflected
power measurements
(depending upon the
configuration of the duplex
module)
HOD2236-111/BBA
HOD4090-111/BBA
A pair of Honeywell HODXXXX-XXX/BBA series of dual wavelength fiber
duplex modules allows full duplex communication over a single fiber link.
They may also be used where a dual fiber solution is neither possible nor
economical. Alternatively, one duplex module may be used to double the
capacity of an existing system.
Each duplex module consists of one on-axis port and one off-axis port,
each configured with the appropriate devices. These devices are coupled
to the single fiber via integral lenses and a 3 dB wavelength
differentiating mirror within the duplex module body. In this configuration,
two duplex modules can communicate in opposing directions
simultaneously and independently of each other. Depending upon the
receiver circuitry used, links of 2 km [1.24 miles] or greater are possible.
The following catalog listings indicate the two devices used in each
duplex module.
• HOD2236-111/BBA:
− 1300 nm multimode laser
− 850 nm PIN diode
• HOD4090-111/BBA (corresponding duplex module):
− 850 nm VCSEL (Vertical Cavity Emitting Surface Laser)
− 1300 nm PIN diode
Other options are available on request. These include two LEDs or lasers
in one duplex module for single fiber multiplexing, PIN+Preamp receivers
(P+P) or any other preferred devices. Housing options include SC and
ST optical ports or a high profile housing for mounting duplex modules
side by side. Future connectors will likely include SMA, FC, LC and
E2000. See the catalog listing numbering scheme on the back page for
complete list of available configurations.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet (or catalog) is for reference only.
DO NOT USE this document as product installation information.
• Complete installation, operation and maintenance information is provided in the
instructions supplied with each product.
Failure to comply with these instructions could result in death or serious
injury.
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency stop devices, or in any
other application where failure of the product could result in personal injury.
Failure to comply with these instructions could result in death or serious
injury.
Control Products
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2236-111/BBA
HOD4090-111/BBA
Infrared Products
Single Fiber Duplex Modules
ELECTRO-OPTICAL CHARACTERISTICS FOR THE
HOD2236-111/BBA
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
Absolute Maximum Ratings (25 °C unless otherwise noted)
Continuous Forward Current
Lead Solder Temperature
Operating Temperature
Storage Temperature
150 mA
260 °C [500 °F], 10 sec
0 °C to 70 °C (32 °F to 158 °F)
-40°C to 85 °C (-40 °F to 185 °F)
Transmit: 1300 nm Laser (All tests made at 25 °C unless otherwise specified.)
Parameter
Symbol Min.
Typ.
Max.
Units
Fiber Coupled Power
POC
40
65
100
µW
-14
-12
-10
dBm
Laser Diode Reverse Voltage VRLD
2.0
V
Photo Diode Reverse Voltage VRPD
10
V
Photo Diode Forward Current VFPD
1
mA
Slope Efficiency
SE
0.3
0.35
mW/mA
Threshold Current
ITH
12
20
mA
Peak Wavelength
λp
1290
1310
1330
nm
Spectral Bandwidth
∆λ
2
5
nm
Forward Voltage
VF
1.2
1.5
V
Response Time
tr/tf
0.5
ns
Photo Diode Monitor Current
Im
100
µA
Photo Diode Dark Current
IDARK
0.1
µA
Photo Diode Capacitance
C
6
15
pF
Test Conditions
IF =17 mA
50/125 µm fiber
CW, Po=5 mW
CW, Po=5 mW
CW, Po=5 mW
CW, Po=5 mW
CW, Po=5 mW
IBIAS=ITH , 10%-90%
CW, Po=5 mW, VRPD =2 V
VRLD =5 V
VRLD =5 V, f=1 MHz
Receive: 850 nm PIN Diode (All tests made at 25 °C unless otherwise specified.)
Parameter
Flux Responsivity
Dark Current
Reverse Voltage
Response Time
10%-90%
90%-10%
Capacitance
2 Honeywell
Symbol
R
ID
BVR
tr
tf
C
Min.
0.2
Typ.
0.3
0.05
Max.
1.2
1.2
1.5
3
3
1.5
50
Units
A/W
nA
V
Test Conditions
λ=850 nm
VR =30 V
ns
VR =3.5 V
pF
VR =5 V
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2236-111/BBA
HOD4090-111/BBA
Infrared Products
Single Fiber Duplex Modules
CAUTION
PRODUCT DAMAGE DUE TO ESD
Ensure normal ESD (Electrostatic Discharge) precautions are followed when handling this product.
Failure to comply with these instructions may result in product damage.
HOD2236-111/BBA Duplex Module
Mounting and Dimensional Drawing (for reference only mm[in])
9,65
[0.38]
8,6
[0.34]
2,5
[0.10]
6,36
[0.25]
9,52
[0.37]
1
4
2
3
9,70
[0.38]
1300 nm
Laser
5/16-32 UNEF-2A
3 Holes 2-56 UNC-2A
6,8 A/F
[0.27]
15,0
[0.59]
13,7
[0.54]
3
1
2
850 nm
PIN Diode
PINOUTS
1
2
3
850 nm PIN Diode
Anode
Cathode
Case (Ground)
For application help: call 1-800-537-6945
1
2
3
4
1300 nm Laser
LD Anode
PD Anode
PD Cathode
LD Cathode
Honeywell 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2236-111/BBA
HOD4090-111/BBA
Infrared Products
Single Fiber Duplex Modules
ELECTRO-OPTICAL CHARACTERISTICS FOR THE
HOD4090-111/BBA
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
Absolute Maximum Ratings (25 °C unless otherwise noted)
Continuous Forward Current
Lead Solder Temperature
Operating Temperature
Storage Temperature
100 mA
260 °C [500 °F], 10 sec
-0 °C to 70 °C (32 °F to 158 °F)
-45 °C to 85 °C (-49 °F to 185 °F)
Transmit: 850 nm VCSEL (All tests made at 25 °C unless otherwise specified.)
Parameter
Fiber Coupled Power
Laser Classification
Threshold Current
ITH Temperature Variation
Slope Efficiency
η Temperature Variation
Peak Wavelength
λp Temperature Coefficient
Spectral Bandwidth
Laser Forward Voltage
Laser Reverse Voltage
Response Time
-40 °C<T<100 °C, 10%-90%
-40 °C<T<100 °C, 90%-10%
Relative Intensity Noise
Series Resistance
Monitor Current
IPD Temperature Variation
Dark Current
PD Reverse Voltage
PD Capacitance
Symbol
POC
ITH
∆ITH
η
∆η
λp
∆λp/∆T
∆λ
VF
BVR LD
tr
tf
RIN
RS
IPD
∆IPD /∆T
ID
BVR PD
C
Min.
200
-7
Typ.
300
-5.2
3.6
-1
0.1
820
0.2
-0.4
850
0.06
1.6
1.8
5
10
15
0.020
100
100
-128
25
Max.
400
-4
Class 1
6
1
0.4
860
0.85
2.2
300
300
-122
50
0.044
0.2
20
30
115
100
55
Units
µW
mA
mA
mW/mA
%/°C
nm
nm/°C
nm
V
Test Conditions
IF=12 mA
50/125 µm fiber
If<15 mA dc
TA=0 °C to 70 °C
Po=1.3 mW
TA=0 °C to 70 °C
IF =12 mA dc
IF =12 mA
IF =12mA
IF =12mA
V
IR =10µA
ps
Bias above threshold
dB/Hz
Ohms
mA
%/°C
NA
V
pF
1 GHz BW
IF =12 mA
Po=1.3 mW
Po= 0.5 mW
Po=0 mW, VR=3 V
Po=0 mW, IR=10 µA
VR =0 V, Freq=1 MHz
VR =3 V, Freq=1 MHz
Receive: 1300 nm PIN Diode (All tests made at 25 °C unless otherwise specified.)
Parameter
Flux Responsivity
Dark Current
Response Time
10%-90%
90%-10%
Cut Off Frequency
Capacitance
Maximum Reverse Voltage
Isolation
4 Honeywell
Symbol
R
ID
tr
tf
FC
C
VRmax
ICX
Min.
0.45
Typ.
0.50
2.0
1500
1.5
40
Max.
5.0
1
1
Units
A/W
nA
ns
1.7
20
MHz
pF
V
dB
Test Conditions
λ=1300 nm
VR=5 V, f=1 MHz
λ=1300 nm
VR= 5 V, RL=50 Ω
VR= 5 V, f=1 MHz
IF (LED)=100 mA dc
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2236-111/BBA
HOD4090-111/BBA
Infrared Products
Single Fiber Duplex Modules
CAUTION
PRODUCT DAMAGE DUE TO ESD
Ensure normal ESD (Electrostatic Discharge) precautions are followed when handling this product.
Failure to comply with these instructions may result in product damage.
HOD4090-111/BBA Duplex Module
Mounting and Dimensional Drawing (for reference only mm[in])
9,65
[0.38]
8,6
2,5
[0.34]
[0.10]
9,52
[0.37]
1
2
3
9,70
[0.38]
1300 nm
PIN DIODE
5/16-32 UNEF-2A
3 Holes 2-56 UNC-2A
6,8 A/F
[0.27]
15,0
[0.59]
13,7
[0.54]
1
4
2
850 nm
VCSEL
3
PINOUTS
1
2
3
4
850 nm VCSEL
Case (Ground)
Cathode
Anode
Cathode
For application help: call 1-800-537-6945
1
2
3
1300 nm PIN Diode
Anode
Cathode
Case (Ground)
Honeywell 5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2236-111/BBA
HOD4090-111/BBA
Infrared Products
Single Fiber Duplex Modules
Duplex Module Catalog Listing Numbering Scheme
HOD
XX*
XX*
X
Port 1 Device
1x
2x
3x
4x
5x
6x
7x
8x
9x
850 nm
LED
1300 nm
LED/Laser
850 nm
PIN
1300 nm
PIN
850 nm
P+P
1300 nm
P+P
Future
Future
Honeywell
VCSEL
Port 2 Device
1x
2x
3x
4x
5x
6x
7x
8x
9x
850 nm
LED
1300 nm
LED/Laser
850 nm
PIN
1300 nm
PIN
850 nm
P+P
1300 nm
P+P
Future
Future
Honeywell
VCSEL
X
X
/
Port 1 Speed
Port 2 Speed
Optical Budget
(Rise/Fall Time) (Rise/Fall Time)
<3 ns
<3 ns
<10 dB
1
1
1
X
X
X
Connector
Mounting
Leads
A
SMA
B
PCB
A Normal
ST Low
Profile
FC
X
Special
B Formed
2
<6 ns
2
<6 ns
2
<20 dB
B
3
<10 ns
3
<10 ns
3
<30 dB
C
4
<20 ns
4
<20 ns
4
<40 dB
D
E
ST Close
Mount
SC
F
LC
G
X
E2000
Special
C Special
*The second digit of each pair of port device numbers corresponds to the specific device used.
Example: HOD4013-132/BBA defines:
40
1300 nm PIN in Port 1 (on axis)
13
850 nm LED in Port 2 (perpendicular axis)
1
<3 ns Rise/Fall Time (1300 nm PIN)
3
<10 ns Rise/Fall Time (850 nm LED)
2
20 dB link budget when used with corresponding duplexer
/
B
ST Low profile connector
B
PCB mounting
A
Normal leads
WARRANTY/REMEDY
Honeywell warrants goods of its
manufacture as being free of defective
materials and faulty workmanship. Contact
your local sales office for warranty
information. If warranted goods are
returned to Honeywell during the period of
coverage, Honeywell will repair or replace
without charge those items it finds
defective. The foregoing is Buyer’s sole
remedy and is in lieu of all other
warranties, expressed or implied,
including those of merchantability and
fitness for a particular purpose.
Specifications may change without
notice. The information we supply is
believed to be accurate and reliable as of
this printing. However, we assume no
responsibility for its use.
While we provide application assistance
personally, through our literature and the
Honeywell web site, it is up to the
customer to determine the suitability of the
product in the application.
For application assistance, current
specifications, or name of the nearest
Authorized Distributor, check the
Honeywell web site or call:
1-800-537-6945 USA
1-800-737-3360 Canada
44 1698 481481 Europe
1-815-235-6847 International
FAX
1-815-235-6545 USA
INTERNET
www.honeywell.com/sensing
info.sc@honeywell.com
Control Products
Honeywell
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
www.honeywell.com/sensing
006469-1-E N IL50 GLO 702 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Through Beam Modules
HOA6299 Series
FEATURES
• Emitter and detector in
separate modules for
variable spacing
• Internal current limiting
resistor
• Direct TTL interface
• Buffer logic
• Fast response time
• Dust protective housing
APPLICATIONS
• Edge detection
• Position control
• Parts counting
• Mail sorting
The HOA6299 Series through beam infrared sensor modules operate
as a pair. The infrared emitting diode, HOA6299-002, and the detector,
HOA6299-003, are encased in black thermoplastic housings. Both the
emitter and detector modules employ 24 AWG wire leads which are
terminated with a Panduit CE156F24-2 connector for the HOA6299-002,
and a Panduit CE156F24-3 connector for the HOA6299-003.
The detector’s NPN output switches whenever an opaque object
blocks the beam path. The buffer logic provides a logic high when the
optical path is clear, and a logic low when the optical path is blocked.
The internal current limiting resistor in the emitter module eliminates the
need for an external interface circuit. The HOA6299 series employs an
IR transmissive housing which features smooth optical faces without
external aperture openings; this feature is desirable when aperture
blockage from airborne contaminants is a possibility.
The HOA6299 Series through beam modules are tested to ensure
operation at minimum separation of (63,5 mm) 2.5 in. This gap can
easily be changed for applications with other spacing requirements.
Housing material is IR transmissive polysulfone. Housings are soluble
in chlorinated hydrocarbons and ketones. Recommended cleaning
agents are methanol and isopropanol.
Honeywell Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Through Beam Modules
HOA6299 Series
ABSOLUTE MAXIMUM RATINGS (25 °C free-air temperature
unless otherwise noted)
Operating Voltage
Emitter
Detector
Operating Temperature
Storage Temperature
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum
Ratings” for extended periods of time
may affect reliability.
Failure to comply with these
instructions may result in product
damage.
2 to 7 V
5 to 12 V
0 °C to 50 °C (32 °F to 122 °F)
-20 °C to 85 °C (-4 °F to 185 °F)
ELECTRICAL CHARACTERISTICS (25 °C unless otherwise noted)
Parameter
Symbol
Min
Operating Supply Voltage
VCC
4.5
Low Level Output Voltage
VOL
Typ
Max
Unit
Test Condition
12
V
TA=25 °C
0.4
V
VCC=5 V, IOH=10 mA
Light path blocked (Note 1)
High Level Output Voltage
VOH
4.5
V
VCC=5 V, IOH=0 mA
Light path not blocked
(Note 1)
Output Sink Current
IOL
10
mA
VCC=5 V, VOL=0.4 V
µs
Response Time
tON
5
VCC=5 V
Note:
1. Emitter and detector modules are tested to ensure operation at minimum separation of 63,5 mm (2.5 in) when
properly aligned.
SCHEMATIC
2 Honeywell • Sensing and Control
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Through Beam Modules
HOA6299 Series
Figure 1
Emitter Module Drive Current vs Applied Voltage
Emitter Module Drive Current - mA
80
70
60
50
40
30
20
10
0
2.0
3.0
4.0
5.0
Applied Voltage - Volts
6.0
7.0
Figure 2
Desired Separation Distance vs Emitter Applied Voltage
Desired Separation Distance - Inches
12.0
10.0
8.0
6.0
4.0
2.0
0.0
2.0
3.0
4.0
5.0
6.0
7.0
Emitter Applied Voltage - Volts
For application help: call 1-800-537-6945
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Assemblies
Through Beam Modules
HOA6299 Series
ORDER GUIDE
Catalog Listing
HOA6299-002
HOA6299-003
Description
Through beam, IR emitting diode
Through beam, IR detector module
OUTLINE DIMENSIONS (mm/in)
HOA6299-002
THE EMITTING AREA
FALLS WITHIN A 5,59
(0.22) DIAMETER ON
THIS CENTER LINE
Tolerance: 3 plc decimals ± 0.25 3 (0.010)
2 plc decimals ± 0.51 3 (0.020)
12,70
(0.500)
3,18 (0.125) DIA.
THRU HOLE
3,81
(0.150)
3,81
(0.150)
PIN 1
CATHODE
304,8
(12.0 +0.5)
HOA6299-003
3,68
(0.145)
THE SENSING AREA
FALLS WITHIN A 5,59
(0.22) DIAMETER ON
THIS CENTER LINE
12,70
(0.500)
3,18 (0.125) DIA.
THRU HOLE
3,81
(0.150)
12,70
(0.500)
ANODE
12,70
(0.500)
PANDUIT, CE156F24-3
12,70
(0.500)
3,81
(0.150)
3,81
(0.150)
PIN 1
381
(15.0 +0.5)
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being
free of defective material and faulty workmanship.
Contact your local sales office for warranty information.
If warranted goods are returned to Honeywell during that
period of coverage, Honeywell will repair or replace
without charge those items it finds defective. The
foregoing is Buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including
those of merchantability and fitness for a particular
purpose.
While we provide application assistance, personally,
through our literature, and through the Honeywell
website, it is up to the customer to determine the
suitability of the product in the application.
Specifications may change at any time without notice.
The information we supply is believed to be accurate and
reliable as of this printing. However, we assume no
responsibility for its use.
OUT
VCC
3,81
(0.150)
PANDUIT, CE156F24-2
12,70
(0.500)
GND
3,68
(0.145)
SALES AND SERVICE
Honeywell Sensing and Control serves its
customers through a worldwide network of sales offices
and distributors. For application assistance, current
specifications, or name of the nearest Authorized
Distributor, contact a nearby sales office or call:
TELEPHONE
1-800-537-6945 (USA)
1-800-737-3360 (Canada)
1-815-235-6847 (International)
FAX
1-815-235-6545 (USA)
INTERNET
www.honeywell.com/sensing
info@micro.honeywell.com
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
www.honeywell.com/sensing
006460-1-EN IL50 GLO 699 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOA6480 Series
Barcode Sensor
Infrared Products
DESCRIPTION
The HOA6480 Series is a reflective barcode sensor that
incorporates a VCSEL (Vertical Cavity Surface-emitting
Laser) emitter and phototransistor detector in a custommolded plastic package. The VCSEL technology allows
the sensor to operate with a very low drive current. The
phototransistor drives an operational amplifier with an
open-collector output, providing users with flexibility in
their interface designs.
•
•
•
•
•
•
FEATURES
Class IIIB VCSEL
Digital output
Depth of field: 4,5 mm ±0,5 mm [0.180 in ±0.20 in]
Focal length: 4,5 mm [0.180 in]
Resolution: 0,254 mm [0.010 in]
Choice of pin, wire or custom termination
DANGER
The HOA6480 Series provides a digital output that
allows it to be interfaced with most decoding equipment.
The 4,5 mm [0.180 in] focal length allows measurement
with no contact and the 0,254 mm [0.010 in] resolution
works well in most barcode applications. The HOA6480
typical scan speed is 254,0 mm [10.0 in] per second.
A choice of pin, wire or custom termination allows
flexible interconnections and the reflective sensor
configuration promotes easy mounting.
POTENTIAL APPLICATIONS
• Barcode verification in dispensing and processing
equipment
• Line or edge detection
• Encoding
• Data collection from manufacturing lines, robotic
operations, production instrumentation/control units,
automated sorting and screening equipment and
analytical systems such as medical analysis. (Note
that carbon black ink is required for this device to
sense lines.)
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
PEAK POWER 5 mW
WAVELENGTH 820-860 nm
CLASS IIIb LASER PRODUCT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOA6480 Series Barcode Sensor
TESTING PROCESS
Each HOA6480 Barcode Sensor is precisely tested
using automated testing equipment and a custom
fixture.
The wheel rotates at 1 RPS (~254,0 mm [10.0 in] per
second). Power, ground and output connections are
applied to the sensor loaded into the test fixture.
During the testing process, the test fixture holds each
sensor at a distance of approximately 4,5 mm
[0.180 in] from a rotating wheel with a diameter of
89,0 mm [3.5 in] and a height of 15,2 mm [0.600 in].
Custom software in the test system evaluates the
duty cycle collected by the sensor and sets the
desired duty cycle between 40 % and 60 %. The
software then reads a sample barcode and verifies
that an accurate and complete barcode signal has
been collected.
One half of the wheel consists of a 50 % duty cycle
barcode of alternating black and white stripes of the
same size (0,38 mm [0.015 in] wide and 16,2 mm
[0.600 in] tall). The other half of the wheel has a
sample barcode of a known value.
REFLECTIVITY
The sensor output will be below 1.1 V when
presented with a 50 % reflective surface at 6,35 mm
[0.250 in] (Kodak Grey Scale #3, CAT 152 7662).
ELECTRICAL CHARACTERISTICS (25 ºC [77 ºF] unless otherwise noted)
Parameter
Min
Typ.
Max
Unit
Supply current
–
–
15
mA
Voltage high
4.5
–
–
Vdc
Voltage low
–
–
1.0
Vdc
Voltage low (d=6,35 mm [0.250 in])
–
–
1.1
Vdc
Output short circuit (sourcing) Vo = 0 V
2
16
–
mA
Output short circuit (sinking) Vo = 5 V
20
60
–
mA
ABSOLUTE MAXIMUM RATINGS
Operating temperature range
Condition
all
black surface
white surface
50 % reflective surface
–
–
-40 ºC to 85 ºC [-40 ºF to 185 ºF]
ELECTRICAL CONNECTIONS
Vcc
5 Vdc
Ground
–
Output
open collector
SCHEMATIC
7
NO CONNECTION
4
Vcc +5 V
1
GND
3
VCSEL
2
OUTPUT
DET
www.honeywell.com/sensing
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Products
MOUNTING DIMENSIONS (For reference only mm/[in].)
10,16
[0.40]
R 1,27
[0.05]
3,81
5,08 [0.15]
[0.20]
13,46
[0.53]
13,46
[0.53]
7
NC
4 3
1
Vcc Vo GND
27,18
[1.07]
24,89
[0.98]
6,35
[0.25]
13,21
[0.52]
13,97
[0.55]
2,54
[0.10]
9,14
[0.36]
5,08
[0.20]
10,16
[0.40]
R 1,52
[0.06]
8,89
[0.35]
13,97
[0.55]
27,94
[1.10]
Honeywell Sensing and Control
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ORDER GUIDE
Catalog Listing
Description
HOA6480-001
HOA6480-002
Barcode sensor with pins
Barcode sensor with 609,6 mm [24.0 in ] wires
WARNING
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could
result in death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being
free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless
agreed to otherwise by Honeywell in writing; please refer
to your order acknowledgement or consult your local
sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option,
without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including
those of merchantability and fitness for a particular
purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.
While we provide application assistance personally,
through our literature and the Honeywell web site, it is up
to the customer to determine the suitability of the product
in the application.
Specifications may change without notice. The
information we supply is believed to be accurate and
reliable as of this printing. However, we assume no
responsibility for its use.
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is
for reference only. Do not use this document as a
product installation guide.
• Complete installation, operation, and maintenance
information is provided in the instructions supplied
with each product.
Failure to comply with these instructions could
result in death or serious injury.
SALES AND SERVICE
Honeywell serves its customers through a worldwide
network of sales offices, representatives and distributors.
For application assistance, current specifications, pricing
or name of the nearest Authorized Distributor, contact
your local sales office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific
+65 6355-2828
+65 6445-3033 Fax
Europe
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
+1-815-235-6545 Fax
Automation and Control Solutions
Sensing and Control
Honeywell
11 West Spring Street
Freeport, Illinois 61032
www.honeywell.com/sensing
006472-1-EN IL50 GLO Printed in USA
June 2005
© 2005 Honeywell International Inc.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Products
Single Fiber Duplex Modules
FEATURES
• Full multiplex over single
fiber
• DC to 160 MHz link
bandwidth
• Link budgets of 2 km [1.24
miles] or greater
• 40 dB isolation
• SC connector
• Other options available
• VCSEL is Class 1 eye safe
APPLICATIONS
• Full duplex data
transmission
• Multiplexing two signals to
a single fiber
• LED and laser coupled
power measurements and
reflected power
measurements (depending
upon the configuration of the
duplex module)
HOD2294-111/EBA
HOD1121-411/EBA
A pair of Honeywell HODXXXX-XXX/EBA series dual wavelength fiber
duplex modules allows full duplex communications over a single fiber
link. They may also be used where a dual fiber solution is neither
possible nor economical.
Each duplex module consists of one on-axis port and one off-axis port,
each configured with the appropriate devices. These devices are coupled
to the single fiber via integral lenses and a 3 dB wavelength
differentiating mirror within the duplex module body. In this configuration,
two duplex modules can communicate in the same direction
simultaneously and independently of each other. Depending upon the
receiver circuitry used, links of 2 km [1.24 miles] or greater are possible.
The following catalog listings indicate the two devices used in each
duplex module.
• HOD2294-111/EBA:
− 850 nm VCSEL (Vertical Cavity Surface Emitting Laser)
− 1300 nm laser
• HOD1121-411/EBA (corresponding duplex module):
− 850 nm LED
− 1300 nm LED
Other standard options are available on request. These include two LEDs
in one duplex module for single fiber multiplexing, PIN diodes, VCSEL
emitters or any other preferred devices. Housing options include SC and
ST optical ports or a high profile housing for mounting duplex modules
side by side. Future connectors will likely include SMA, FC, LC and
E2000 options. See the catalog listing numbering scheme on the back
page for a complete list of available configurations.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet (or catalog) is for reference only.
DO NOT USE this document as product installation information.
• Complete installation, operation and maintenance information is provided in the
instructions supplied with each product.
Failure to comply with these instructions could result in death or serious
injury.
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency stop devices or in any
other application where failure of the product could result in personal injury.
Failure to comply with these instructions could result in death or serious
injury.
Control Products
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2294-111/EBA
HOD1121-411/EBA
Infrared Products
Single Fiber Duplex Modules
ELECTRO-OPTICAL CHARACTERISTICS FOR THE
HOD2294-111/EBA
CAUTION
Absolute Maximum Ratings (25 °C unless otherwise noted)
Continuous Forward Current
Reverse Voltage
Lead Solder Temperature
Operating Temperature
Storage Temperature
20 mA (VCSEL), 100 mA (850 nm LED)
5 V (VCSEL), 1 V at 10 µA (850 nm LED)
260 °C [500 °F], 10 sec
0 °C to 70 °C (32 °F to 158 °F)
-40 °C to 100 °C (-40 °F to 212 °F)
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
Transmit: 1300 nm Laser (All tests made at 25 °C unless otherwise specified.)
Parameter
Fiber Coupled Power
Symbol
POC
Laser Diode Reverse Voltage
Photo Diode Reverse Voltage
Photo Diode Forward Current
Slope Efficiency
Threshold Current
Peak Wavelength
Spectral Bandwidth
Forward Voltage
Response Time
Photo Diode Monitor Current
Photo Diode Dark Current
VRLD
VRPD
VFPD
Photo Diode Capacitance
C
SE
ITH
λp
∆λ
VF
tr/tf
Im
Min.
200
-7.0
Typ.
280
-5.5
Max.
0.1
Units
µW
dBm
V
V
mA
mW/mA
mA
nm
nm
V
ns
µA
µA
15
pF
2.0
10
1
0.3
1290
0.35
12
1310
2
1.2
20
1330
5
1.5
0.5
100
IDARK
6
Test Conditions
IF =20 mA
50/125 µm fiber
CW, Po=5 mW
CW, Po=5 mW
CW, Po=5 mW
CW, Po=5 mW
CW, Po=5 mW
IBIAS=ITH 10%-90%
CW, Po=5 mW, VRPD =2 V
VRLD =5 V
VRLD =5 V, f=1 MHz
Transmit: 850 nm VCSEL (All tests made at 25 °C unless otherwise specified.)
Parameter
Fiber Coupled Power
Threshold Current
ITH Temperature Variation
Slope Efficiency
η Temperature Variation
Peak Wavelength
λp Temperature Coefficient
Spectral Bandwidth
Laser Forward Voltage
Laser Reverse Voltage
Response Time
-40 °C<T<100 °C, 10%-90%
-40 °C<T<100 °C, 90%-10%
Relative Intensity Noise
Series Resistance
Monitor Current
IPD Temperature Variation
Dark Current
PD Reverse Voltage
PD Capacitance
2 Honeywell
Symbol
POC
ITH
∆ITH
η
∆η
λp
∆λp/∆T
∆λ
VF
BVR LD
tr
tf
RIN
RS
IPD
∆IPD /∆T
ID
BVR PD
C
Min.
200
-1
0.1
820
1.6
5
15
0.020
Typ.
280
Max.
Units
µW
3.6
6
mA
1
0.4
mA
mW/mA
%/°C
nm
nm/°C
nm
V
V
0.2
-0.4
850
0.06
1.8
10
100
100
-128
25
860
0.85
2.2
300
300
-122
50
0.044
0.2
20
30
115
100
55
Test Conditions
IF=12 mA
50/125 µm fiber
TA=0 °C to 70 °C
Po=1.3 mW
TA=0 °C to 70 °C
IF=12 mA dc
IF=12 mA
IF=12mA
IF =12mA
IR =10µA
Ps
bias above threshold
dB/Hz
Ohms
mA
%/°C
nA
V
p
1 GHz BW
IF=12 mA
Po=1.3 mW
Po= 0.5 mW
Po=0 mW, VR=3 V
Po=0 mW, IR=10 µA
VR=0 V, Freq=1 MHz
VR=3 V, Freq=1 MHz
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2294-111/EBA
HOD1121-411/EBA
Infrared Products
Single Fiber Duplex Modules
CAUTION
PRODUCT DAMAGE DUE TO ESD
Ensure normal ESD (Electrostatic Discharge) precautions are followed when handling this product.
Failure to comply with these instructions may result in product damage.
HOD2294-111/EBA Duplex Module
Mounting and Dimensional Drawing (for reference only mm[in])
PINOUTS
1
2
3
850 nm VCSEL
LD Anode
LD Cathode/PD Cathode
PD Cathode
For application help: call 1-800-537-6945
1
2
3
4
1300 nm Laser
LD Anode
PD Anode
PD Cathode
LD Cathode
Honeywell 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2294-111/EBA
HOD1121-411/EBA
Infrared Products
Single Fiber Duplex Modules
ELECTRO-OPTICAL CHARACTERISTICS FOR THE
HOD1121-411EBA
CAUTION
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
Absolute Maximum Ratings (25 °C unless otherwise noted)
Continuous Forward Current
Reverse Voltage
Lead Solder Temperature
Operating Temperature
Storage Temperature
20 mA (VCSEL), 100 mA (850 nm LED)
5 V (VCSEL), 1 V at 10 µA (850 nm LED)
260 °C [500 °F], 10 sec
0 °C to 70 °C (32 °F to 158 °F)
-40°C to 100 °C (-40 °F to 212 °F)
Transmit: 850 nm LED (all tests made at 25 °C unless otherwise specified)
Parameter
Symbol
Min.
Typ.
Max.
Fiber Coupled Power
POC
16
-18.0
Forward Voltage
VF
1.5
Reverse voltage
BVR
1.0
5.0
Peak Wavelength
λp
850
Spectral Bandwidth
∆λ
60
Response Time
10%-90%
tr
12
20
90%-10%
tf
12
20
Analog Bandwidth
BWE
70
Po Temperature Coefficient
∆PO/∆T
-0.007
Capacitance
C
70
Thermal Resistance
250
MHz
dB/°C
pF
°C/W
IF=50 mA dc
IF=50 mA
VR=0 V, f=1 mHz
heatsinked
Transmit: 1300 nm LED (All tests made at 25°C unless otherwise specified)
Parameter
Symbol
Min.
Typ.
Max.
Fiber Coupled Power
16
POC
-18.0
Units
µW
dBm
Test Conditions
IF=40 mA
62.5/125 µm fiber
Forward Voltage
Reverse voltage
VF
VR
Peak Wavelength
Spectral Bandwidth
Response Time
10%-90%
90%-10%
Analog Bandwidth
Po Temperature Coefficient
Capacitance
λp
∆λ
4 Honeywell
tr
tf
BWE
∆PO/∆T
C
1.4
1290
2.5
2.5
115
-0.03
15
Units
µW
dBm
V
V
nm
nm
ns
Test Conditions
IF=20 mA
62.5/125 µm fiber
IF=10 mA
IF=10 µA
IF=25 mA dc
IF=25 mA dc
1 V prebias, 50 mA peak
1.7
2.0
V
1350
170
nm
nm
IF=100 mA dc
IF=100 mA dc
4
4
ns
IF=100 mA, 50%
duty cycle, f=12.5 MHz
IF=100 mA
IF=100 mA
VR=3 V, f=1 MHz
50
MHz
dB/°C
pF
IF=100 mA
IF=2 µA
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2294-111/EBA
HOD1121-411/EBA
Infrared Products
Single Fiber Duplex Modules
CAUTION
PRODUCT DAMAGE DUE TO ESD
Ensure normal ESD (Electrostatic Discharge) precautions are followed when handling this product.
Failure to comply with these instructions may result in product damage.
HOD1121-411/EBA Duplex Module
Mounting and Dimensional Drawing (for reference only mm[in])
PINOUTS
1
2
3
Anode
Cathode
Case
1300 nm LED
For application help: call 1-800-537-6945
1
2
3
850 nm LED
Anode (Case)
Cathode
Not Connected
Honeywell 5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
HOD2294-111/EBA
HOD1121-411/EBA
Infrared Products
Single Fiber Duplex Modules
Duplex Module Catalog Listing Numbering Scheme
HOD
XX*
XX*
X
Port 1 Device
850 nm
LED
1300 nm
LED/Laser
850 nm
PIN
1300 nm
PIN
850 nm
P+P
1300 nm
P+P
Future
Future
Honeywell
VCSEL
1x
2x
3x
4x
5x
6x
7x
8x
9x
Port 2 Device
1x
2x
3x
4x
5x
6x
7x
8x
9x
850 nm
LED
1300 nm
LED/Laser
850 nm
PIN
1300 nm
PIN
850 nm
P+P
1300 nm
P+P
Future
Future
Honeywell
VCSEL
X
X
/
Port 1 Speed
Port 2 Speed
Optical Budget
(Rise/Fall Time) (Rise/Fall Time)
<3 ns
<3 ns
<10 dB
1
1
1
X
X
X
Connector
Mounting
Leads
A
SMA
B
PCB
A Normal
ST Low
Profile
FC
X
Special
B Formed
2
<6 ns
2
<6 ns
2
<20 d B
B
3
<10 ns
3
<10 ns
3
<30 dB
C
4
<20 ns
4
<20 ns
4
<40 dB
D
E
ST Close
Mount
SC
F
LC
G
X
E2000
Special
C Special
*The second digit of each pair of port device numbers corresponds to the specific device used.
Example: HOD5721-412/EBA defines:
57
21
4
1
2
/
E
B
A
850 nm P+P in Port 1 (on axis)
1300 nm LED in Port 2 (perpendicular axis)
<20 ns Rise/Fall Time (850 nm P+P)
<3 ns Rise/Fall Time (1300 nm LED)
20 dB link budget when used with corresponding duplex module
SC connector
PCB mounting
Normal leads
WARRANTY/REMEDY
Honeywell warrants goods of its
manufacture as being free of defective
materials and faulty workmanship. Contact
your local sales office for warranty
information. If warranted goods are
returned to Honeywell during the period of
coverage, Honeywell will repair or replace
without charge those items it finds
defective. The foregoing is Buyer’s sole
remedy and is in lieu of all other
warranties, expressed or implied,
including those of merchantability and
fitness for a particular purpose.
Specifications may change without
notice. The information we supply is
believed to be accurate and reliable as of
this printing. However, we assume no
responsibility for its use.
While we provide application assistance
personally, through our literature and the
Honeywell web site, it is up to the
customer to determine the suitability of the
product in the application.
For application assistance, current
specifications, or name of the nearest
Authorized Distributor, check the
Honeywell web site or call:
1-800-537-6945 USA
1-800-737-3360 Canada
44 1698 481481 Europe
1-815-235-6847 International
FAX
1-815-235-6545 USA
INTERNET
www.honeywell.com/sensing
info.sc@honeywell.com
Control Products
Honeywell
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
006470-1-E N IL50
www.honeywell.com/sensing
GLO 702 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Ceramic Discrete Surface Mount Emitters and
Detectors
FEATURES
• Small package size
• Glass lensed optics for
efficient optical coupling
• Upright or inverted mounting
capability
• Low profile, small size for
flexible layout of multiple
channels and custom arrays
• Compatible with automated
solder processes:
- IR reflow
- vapor phase
- solder wave
- convection oven
• Choice of photodiode or
phototransistor detectors
• IRED features high power
dissipation capability
• Tape and reel packaging
option − pick and place
machine compatible
APPLICATIONS
• Optical encoders for motion
control
• Computer peripherals
• Vending and point-of-sale
applications
• Smoke detectors
• Medical equipment
SME/SMD Series
The SME2470, SMD2440 and SMD2420 Series surface mount
infrared components are small ceramic packages (0.15 x 0.10 x
0.083 in. / 3,81 x 2,54 x 2,1 mm) with glass lenses. The lens minimizes
cross talk and often eliminates the need for apertures in non-critical
applications. The low profile components may be mounted on the
printed circuit board, lens up or inverted, allowing flexibility in layouts for
multiple channel and custom arrays. When mounted lens down over a
hole in the PC board, the lens is hidden, lowering overall package
height.
The SME2470 is a high intensity aluminum gallium arsenide infrared
emitting diode (IRED) which can be used with either the SMD2440
phototransistor or the SMD2420 photodiode. It supplies optimum optical
characteristics and efficient optical coupling. The small size and high
power dissipation properties of the IRED promote PC board
miniaturization and high density placement.
The SMD2440 Series phototransistor’s gain characteristics make it
useful for applications requiring high responsivity. The SMD2420 Series
photodiode is especially useful in applications requiring linear response
or high switching speed.
These components are available in bulk, or on tape and reel for use
with automatic placement equipment.
Honeywell Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Ceramic Discrete Surface Mount
SME/SMD Series
SME2470 SERIES IRED ABSOLUTE MAXIMUM RATINGS
CAUTION
Power dissipation @ 25 °C*
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum Ratings”
for extended periods of time may
affect reliability.
Failure to comply with these
instructions may result in product
damage.
150 mW
Continuous forward current
75 mA (mounted on a PC board)
Reverse voltage (IF = 10 µA)
3V
Operating free air temperature range
-55° to +125°C (-67° to +257°F)
Storage temperature
-65° to +150°C (-85° to +302°F)
Soldering temperature
260°C (500°F), 5 seconds max.
*Derate 1.43 mW/°C above 25°C ambient.
SME2470 SERIES IRED ELECTRICAL CHARACTERISTICS (at 25°C unless otherwise noted)
Parameter
Irradiance
Sym.
H
Forward voltage
Test Conditions
Measured into 0.104 in. (2.64 mm) dia.
aperture @ 0.535 in. (13.59 mm) from
lens tip. IF = 50 mA
IF = 50 mA
Min.
0.6
Reverse breakdown voltage
IR= 10 µA
BVR
Peak output wavelength
IF = 50 mA
λ
880
nm
Spectral bandwidth
Rise time
Fall time
IF = 50 mA
10 µsec pulse width
tR
tF
80
800
700
nm
ns
ns
VF
Typ.
1.5
Max.
Units
2
mW/cm
1.8
Volts
3.0
Volts
100%
100%
80%
80%
Relative Irradiance
Relative Irradiance
TYPICAL IRED PERFORMANCE CHARACTERISTICS
SME2470 Spectral Bandwidth
SME2470 Irradiance vs Angular Displacement
60%
40%
20%
0%
760
800
840
880
920
Wavelength - nm
2 Honeywell • Sensing and Control
960
1000
60%
40%
20%
0%
-30
-20
-10
0
10
20
30
Angular Displacement - Degrees
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Ceramic Discrete Surface Mount
SME/SMD Series
TYPICAL IRED PERFORMANCE CHARACTERISTICS (when solder mounted to PC board)
SME2470 Forward Current vs Forward Voltage
SME2470 Forward Voltage vs Temperature
1.6
1.55
Forward Voltage - V
Forward Voltage - V
1.5
1.4
1.3
1.2
1.1
1.0
0
20
40
60
80
1.50
1.45
1.40
1.35
1.30
-55
100
-10
Forward Current - mA
125
SME2470 Irradiance vs Forward Current
100%
Relative Irradiance
200%
Normalized Irradiance
80
Temperature - C
SME2470 Irradiance vs Temperature
160%
120%
80%
40%
0%
-55
35
80%
60%
40%
20%
0%
-10
35
80
Temperature - C
For application help: call 1-800-537-6945
125
0
10
20
30
40
50
60
70
Forward Current - mA
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Ceramic Discrete Surface Mount
SME/SMD Series
SMD2440 SERIES PHOTOTRANSISTOR ABSOLUTE MAXIMUM
RATINGS
Collector-Emitter voltage
30 V
Emitter-Collector voltage
5V
Continuous device dissipation*
125 mW
Operating free air range
-55° to +125°C (-67° to +257°F)
Storage temperature
-65° to +150°C (-85° to +302°F)
Soldering temperature
260°C (500°F), 5 seconds max.
*Derate 1.43 mW/°C above 25°C ambient.
SMD2440 SERIES PHOTOTRANSISTOR ELECTRICAL CHARACTERISTICS
Parameter
Light current
Test Conditions
-0X1
-0X2
2
VCE = 5 V, H = 1 mW/cm ,
880 nm light source
Sym.
Min.
IL
1.5
3.0
Dark current
VCE = 10 V, H = 0
ID
Collector breakdown voltage
IC = 100 µA, H = 0
BVCEO
30
Emitter breakdown voltage
IE = 100 µA, H = 0
BVECO
5
Saturation voltage (C to E)
IC = 0.04 mA, H = 1 mW/cm
2
Peak response wavelength
Rise time
VCC = 5 V, RL = 1000 Ω, IL = 1 mA
Fall time
Typ.
Max.
Units
4.0
8.0
mA
mA
100
nA
Volts
Volts
VCE(SAT)
0.2
0.4
λ
880
nm
Volts
tR
15
µs
tF
15
µs
SMD2420 SERIES PHOTODIODE ABSOLUTE MAXIMUM
RATINGS
Cathode-Anode voltage
50 V
Continuous device dissipation*
125 mW
Operating free air range
-55° to +125°C (-67° to +257°F)
Storage temperature
-65° to +150°C (-85° to +302°F)
Soldering temperature
260°C (500°F), 5 seconds max.
*Derate 1.43 mW/°C above 25°C ambient.
SMD2420 SERIES PHOTODIODE ELECTRICAL CHARACTERISTICS
Parameter
Test Conditions
Light current
VR = 20 V, H = 1 mW/cm *
Dark current
VR = 20 v, h = 0
ID
Reverse breakdown voltage
IR = 10 µA, H = 0
BVR
Peak response wavelength
Rise time
Fall time
VR = 20 V, RL 100 Ω, IL = 10 µA
λ
tR
tF
2
Sym.
Min.
IL
6
Typ.
Max.
Units
µA
5
50
nA
Volts
880
20
20
nm
ns
ns
*From 880 nm source
4 Honeywell • Sensing and Control
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Ceramic Discrete Surface Mount
SME/SMD Series
TYPICAL SMD2440 AND SMD2420 SERIES PERFORMANCE CHARACTERISTICS (when solder
mounted to PC board)
SMD2440 and SMD2420 Spectral Responsivity
SMD2440 and SMD2420 Responsivity vs Angular
Displacement
100%
80%
Relative Irradiance
Relative Response
100%
60%
40%
20%
0%
400
500
600
800
700
80%
60%
40%
20%
0%
-40
900 1000 1100 1200
Wavelength - nm
-30
-20
-10
0
10
20
30
40
Angular Displacement - Degrees
SMD2440 Dark Current vs Temperature
SMD2420 Dark Current vs Temperature
100000
100
VCE = 15 V
H=0V
1000
Dark Current - nA
Dark Current - nA
10000
100
10
1
0.1
10
1.0
0.1
0.01
0.01
0.001
-40
-20
0
20
40
60
80
100
0.001
-55
120 140
35
80
125
Temperature - C
Temperature - C
SMD2440 Collector Current vs Ambient
Temperature
SMD2440 Non-saturated Switching Time vs Load
Resistance
100
1.6
Response Time - uS
Normalized Collector Current
-10
1.4
1.2
1.0
0.8
10
1
0.6
0
20
40
60
Ambient Temperature - C
For application help: call 1-800-537-6945
80
10
100
1000
10000
Load Resistance - Ohms
Honeywell • Sensing and Control 5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Ceramic Discrete Surface Mount
SME/SMD Series
TYPICAL SMD2440 AND SMD2420 SERIES PERFORMANCE CHARACTERISTICS (when solder
mounted to PC board)
Normalized Light Current
SME to SMD Coupling Characteristics
100%
80%
60%
40%
20%
0%
0.1
0
0.2
0.3
0.4
0.5
0.6
Lens-to Lens Separation - inches
SMD2440 Switching Time Test Circuit
+
SMD2440 Switching Waveform
Vcc +5 V
Collector
1.0 V
90%
GaAs Emitter
e0
10%
Emitter
250 uS
RL
1000
e0
0V
tr
t
tr
SMD2420 Switching Time Test Circuit
+
SMD2420 Switching Waveform
VR +20 V
Cathode
100%
90%
GaAs Emitter
e0
10%
Anode
10 uS
RL
50
e0
0%
tr
t
tr
-
6 Honeywell • Sensing and Control
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Ceramic Discrete Surface Mount
SME/SMD Series
SME2470, SMD2440, SMD2420 OUTLINE DIMENSIONS in./(mm) (for reference only)
Ø 0.068 (1,7)
A
A
Anode (SME2470)
Collector (SMD2440)
Cathode (SMD2420)
SME
Cathode (SME2470)
Emitter (SMD2440)
Anode (SMD2420)
Anode
0.040 (1,0)
0.100 (2,5)
View A-A
0.015 (0,4)
Cathode
0.083
(2,1)
SMD
0.150 (3,8)
Anode
Collector
0.70
(1,8)
Emitter
Cathode
0.030 (0,8)
TAPE AND REEL MOUNTING CONFIGURATIONS: EIA STD 12 mm tape and reel with a 4 mm pitch in.(mm)
0.113
(2,87)
0.085 (2,16)
0.079 ±.002
(2,01 ±,050)
SECTION A-A
0.157 (3,99)
Ø 0.062
(1,57)
0.010 ±.004
(0,254 ±,15)
0.069 (1,75)
0.472+.012
-.004
A
0.217 ±.002
(5,51 ±,05)
A
)
(11,98+,30
-,10
0.165 (4,19)
VIEW WITH SMD INSTALLED UPRIGHT
0.095
(2,41)
0.157
(3,98)
0.157
(3,99)
- RECTANGULAR METALIZED END TOWARDS HOLES
- RADIUSED METALIZED END TOWARD EDGE
Ø 0.062 +.010
-.000
0.79 ±.002
(2,01 ±,05)
(10,13 +,25
-,00 )
Ø 0.062
(10,13)
0.010 ±.004
(0,25 ±,10)
0.069 (1,75)
0.217 ±.002
(5,51 ±,05)
0.472 +.012
-.004
0.165
(4,19)
(11,99 +,30
-,10 )
0.083 (2,11)
0.056
(1,42)
0.048 (1,22)
0.157
(3,99)
0.113
(2,88)
For application help: call 1-800-537-6945
VIEW WITH SMD INSTALLED INVERTED
0.106
(2,69)
- SQUARE END TOWARD HOLES
- ROUND END TOWARD EDGE
Honeywell • Sensing and Control 7
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Ceramic Discrete Surface Mount
ORDER GUIDE
Catalog Listing
Description
SME2470-001
Bulk Packaged, Surface Mount IR Emitter
SMD2420-001
Bulk Packaged, Surface Mount Photodiode
SMD2440-001
Bulk Packaged, Surface Mount Phototransistor
SMD2440-002
Bulk Packaged, Surface Mount Phototransistor
SME2470-011
Tape and Reel, Inverted, Surface Mount IR Emitter
SMD2420-011
Tape and Reel, Inverted, Surface Mount Photodiode
SMD2440-011
Tape and Reel, Inverted, Surface Mount Phototransistor
SMD2440-012
Tape and Reel, Inverted, Surface Mount Phototransistor
SME2470-021
Tape and Reel Upright, Surface Mount IR Emitter
SMD2420-021
Tape and Reel, Upright, Surface Mount Photodiode
SMD2440-021
Tape and Reel, Upright, Surface Mount Phototransistor
SMD2440-022
Tape and Reel, Upright, Surface Mount Phototransistor
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective material and faulty workmanship. Contact your local sales
office for warranty information. If warranted goods are returned to
Honeywell during that period of coverage, Honeywell will repair or
replace without charge those items it finds defective. The foregoing is
Buyer’s sole remedy and is in lieu of all other warranties,
expressed or implied, including those of merchantability and
fitness for a particular purpose.
While we provide application assistance, personally, through our
literature, and through the Honeywell website, it is up to the customer
to determine the suitability of the product in the application.
Specifications may change at any time without notice. The
information we supply is believed to be accurate and reliable as of
this printing. However, we assume no responsibility for its use.
SME/SMD Series
SALES AND SERVICE
Sensing and Control serves its
customers through a worldwide
network of sales offices and
distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact a
nearby sales office or call:
TELEPHONE
1-800-537-6945 (USA)
1-800-737-3360 (Canada)
1-815-235-6847 (International)
FAX
1-815-235-6545 (USA)
INTERNET
www.honeywell.com/sensing
info@micro.honeywell.com
HONEYWELL
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
www.honeywell.com/sensing
006445-2-EN IL50 GLO 199 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Plastic Discrete Surface Mount Emitters and
Detectors
FEATURES
• Small package size
• Compatible with automated
solder processes:
- IR reflow
- conductive epoxy
- vapor phase reflow
- convection oven
• Helps eliminate mixed
technology PC boards
• Will operate in a DC or
pulse mode for increased
output
• Light pipe compatible
• Top-emitting and sensing
area
• Low profile, small size for
flexible layout of multiple
channels and custom arrays
• Tape and reel packaging
option - pick and place
machine compatible
APPLICATIONS
• Optical encoders for motion
control
• Computer peripherals
• Vending and point-of-sale
applications
• Smoke detectors
• Medical equipment
SME/SMD Series
The SME6700 and SMD6400 Series surface mount infrared
components are small plastic packages (2,8 mm x 3,2 mm x 1,5 mm/
0.110 in x 0.126 in x 0.073 in) in an un-lensed, top emitting and sensing
package.
These surface mount infrared components are designed for high
density placement by automatic assembly machinery.
The SME6700 is an aluminum gallium arsenide infrared emitting diode
(IRED). This component supplies optimum optical characteristics and
can be used with the SMD6400 phototransistor. The small size and high
power dissipation properties of the IRED promote PC (Printed Circuit)
board miniaturization and high density placement.
These surface mount infrared components are available in bulk, or on
tape and reel for use with automatic placement equipment.
Sensing and Control
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Plastic Discrete Surface Mount Emitters and Detectors
SME6700 SERIES IRED ABSOLUTE MAXIMUM RATINGS
SME/SMD Series
CAUTION
(1)
Power dissipation @ 25 °C
100 mW
Continuous forward current
100 mA (mounted on a PC board)
Reverse voltage (IF = 10 µA)
5V
Operating free air temperature range
-40 °C to +85 °C (-104 °F to +185 °F)
Storage temperature
-40 °C to +85 °C (-104 °F to +185 °F)
Soldering temperature
260 °C (500 °F), 10 seconds max.
Note:
1. Derate 0.78 mW/°C above 25 °C ambient.
STRESS DAMAGE
Functional operation of the device at
or above “Absolute Maximum
Ratings” for extended periods of time
may affect reliability.
Failure to comply with these
instructions may result in product
damage.
SME6700 SERIES IRED ELECTRICAL CHARACTERISTICS (at 25 °C unless otherwise noted)
Parameter
Irradiance
-001
Forward voltage
Reverse breakdown voltage
Peak output wavelength
Test Conditions
IF = 50 mA measured into 2,06 mm
(0.081 in) dia. aperture located 18,16 mm
(0.715 in) from the emitting surface
IF = 50 mA
IR = 1 µA
IF = 50 mA
Sym.
Ie
Min.
.40
VF
VR
5.0
λ
Spectral bandwidth
IF = 50 mA
-λ
Temperature coefficient of λP
-λP/-λ
(1)
Beam angle
θ
IF = constant
Radiation rise/fall time
10 µsec pulse width
t R tF
Note:
1. Beam angle is defined as the total included angle between the half power points.
Typ.
.52
Max.
Units
2
mW/cm
1.8
880
V
V
nm
80
0.2
120
0.7
nm
nm/°C
deg.
Ts
TYPICAL IRED PERFORMANCE CHARACTERISTICS
SME6700 Spectral Bandwidth
1.0
Relative Intensity
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
760
800
840
880
920
960
1000
Wavelength - nm
2 Honeywell • Sensing and Control
For application help: call 1-800-537-6945
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Plastic Discrete Surface Mount Emitters and Detectors
SME/SMD Series
TYPICAL IRED PERFORMANCE CHARACTERISTICS (when solder mounted to PC board)
SME6700 Forward Current vs Forward Voltage
SME6700 Irradiance vs Temperature
10
Relative Power Output
1.6
Forward Voltage - V
1.5
1.4
1.3
1.2
1.1
1.0
0
10
20
30
40
50
5.0
I F = 40 mA
I F = 30 mA
I F = 20 mA
2.0
1.0
0.5
I F = 10 mA
0.2
1
-50
-25
0
+25
+50
+75
+100
Free Air Temperature - C
Forward Current - mA
Normalized Radiant Intensity
SME6700 Irradiance vs Forward Current
10.0
0.5
0.2
TA = 25 C
1.0
0.5
0.2
0.1
10
20
30
40
50
100
Forward Current - mA
For application help: call 1-800-537-6945
Honeywell • Sensing and Control 3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Plastic Discrete Surface Mount Emitters and Detectors
SME/SMD Series
SMD6400 SERIES PHOTOTRANSISTOR ABSOLUTE
MAXIMUM RATINGS (TA = 25 °C)
Collector-emitter voltage
Emitter-collector voltage
(1)
Continuous device dissipation
Operating free air range
Storage temperature
Soldering temperature
35 V
5V
100 mW
-40 °C to +85 °C (-104 °F to +185 °F)
-40 °C to +85 °C (-104 °F to +185 °F)
260 °C (500 °F), 5 seconds max.
Note:
1. Derate 2.2 mW/°C above 25 °C ambient.
SMD6400 SERIES PHOTOTRANSISTOR ELECTRICAL CHARACTERISTICS
Parameter
(1)
Light current
-001
-002
-003
-004
Dark current
Collector breakdown voltage
Emitter breakdown voltage
Saturation voltage (C to E)
Test Conditions
2
H = 0.1 mW/cm , Vce = 5 V
Vce = 25 V, H = 0
Ic = 100 µA, H = 0
Ie = 100 µA, H = 0
Ic = 0.3 x IC MINIMUM, H = 0.1
2
mW/cm
Peak response wavelength
Angular response
(2)
If = constant
Ic = 1 mA, Vce = 5 V, RL = 1000 Ω
Rise time
Fall time
Sym.
Ic
Iceo
BVceo
BVeco
Vce(SAT)
Min.
16
16
25
40
Typ.
Max.
Units
32
50
200
35
5
0.15
µA
µA
µA
µA
nA
V
V
V
λ
935
nm
θ
tR
tF
120
deg.
6-8
6-8
µs
µs
Notes:
1. The radiation source is an IRED with a peak wavelength of 935 nm.
2. Angular response is defined as the total included angle between the half sensitivity points.
SMD6400 Spectral Responsivity
1.0
Relative Response
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
400
600
800
1000
1200
Wavelength - nm
For application help: call 1-800-537-6945
Honeywell • Sensing and Control 4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Plastic Discrete Surface Mount Emitters and Detectors
SMD6400 Dark Current vs Temperature
1000
2.0
Dark Current - nA
Normalized Collector Current
SMD6400 Collector Current vs Ambient
Temperature
SME/SMD Series
1.6
1.2
0.8
0.4
0.0
0
10
20
30
40
50
70
80
90
VCE = 15 V
H=0
100
10
1
0.1
0.01
-40
-20
20
40
60
80
100
Free Air Temperature - C
Free Air Temperature - C
SMD6400 Switching Time Test Circuit
+
0
SMD6400 Switching Waveform
Vcc +5 V
Collector
1.0 V
90%
e0
10%
Emitter
250 uS
RL
1000
e0
0V
tr
t
tr
-
For application help: call 1-800-537-6945
Honeywell • Sensing and Control 5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Infrared Components
Plastic Discrete Surface Mount Emitters and Detectors
ORDER GUIDE
Catalog Listing
SME6700-001B
SMD6400-001B
SMD6400-002B
SMD6400-003B
SMD6400-004B
SME6700-001T
SMD6400-001T
SMD6400-002T
SMD6400-003T
SMD6400-004T
Description
Bulk Packaged, Surface Mount IR Emitter
Bulk Packaged, Surface Mount Phototransistor
Bulk Packaged, Surface Mount Phototransistor
Bulk Packaged, Surface Mount Phototransistor
Bulk Packaged, Surface Mount Phototransistor
Tape and Reel*, Surface Mount IR Emitter
Tape and Reel*, Surface Phototransistor
Tape and Reel*, Surface Phototransistor
Tape and Reel*, Surface Phototransistor
Tape and Reel*, Surface Phototransistor
*EIA STD 12 mm Tape and Reel with a 4 mm pitch. Consult factory for
details.
SME6700 and SMD6400 OUTLINE DIMENSIONS mm/(in) (for
reference only)
RECOMMENDED SOLDER PAD LAYOUT mm/(in)
SME/SMD Series
WARRANTY/REMEDY
Honeywell warrants goods of
its manufacture as being free of
defective material and faulty
workmanship. Contact your local
sales office for warranty
information. If warranted goods
are returned to Honeywell during
that period of coverage,
Honeywell will repair or replace
without charge those items it
finds defective. The foregoing is
Buyer’s sole remedy and is in
lieu of all other warranties,
expressed or implied,
including those of
merchantability and fitness for
a particular purpose.
While we provide application
assistance, personally, through
our literature, and through the
Honeywell website, it is up to the
customer to determine the
suitability of the product in the
application.
Specifications may change
without notice. The information
we supply is believed to be
accurate and reliable as of this
printing. However, we assume no
responsibility for its use.
While we provide application
assistance personally, through
our literature and the Honeywell
web site, it is up to the customer
to determine the suitability of the
product in the application.
For application assistance,
current specifications, or name of
the nearest Authorized
Distributor, contact a nearby
sales office. Or call:
1-800-537-6945 USA
1-800-737-3360 Canada
1-815-235-6847 International
FAX
1-815-235-6545 USA
INTERNET
www.honeywell.com/sensing
info@micro.honeywell.com
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50%Recycled Paper
www.honeywell.com/sensing
006459-1-EN IL50 GLO 1299 Printed in USA
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com