SIPLUS CMS4000
ION ANALOGINPUT T001
Condition
Monitoring for
technical and
technological
service in
industrial plants.
Overview
ION ANALOGINPUT T001
SIPLUS CMS4000 is a low-cost, modular,
scalable analysis- and diagnostic-system,
optimized for the sampling of analog and
binary signals and numeric data in
industrial plants. The system can be
integrated reactionless and device
independent in existing and new
machines and plant components.
The ION ANALOGINPUT T001 is used to
acquire analog signals and to transmit the
recorded data via the FireWire bus
(IEEE1394a-standard) with 400 Mbps to a
higher level industrial PC. The use of an
ION ANALOGINPUT T001 allows recording
8 analog, separate electrically insulated
signals within a range of ± 10 V. The
maximum sample frequency is 40 kHz per
analog input.
A reliable and easy connection of
different signal sources is possible by
standardized interfaces. Due to easy to
use programming and an extensive array
of software and hardware nodes SIPLUS
CMS is perfectly suited for many
measurement applications.
SIPLUS CMS
SIPLUS CMS4000
ION ANALOGINPUT T001
Technical Data
Interfaces
Cables
IEEE1394a P1…P3
Number
3
Connector type
6-pin connector
Transfer speed
400 Mbps
FireWire
According to IEEE1394a
standard
Analog inputs
Maximum length: 3m
Environmental Conditions / EMV
Power Supply 24 V, 0 V, PD (Power Down)
Transport and storage
temperature
-25…+85 °C
Connector type
3-pin connector
(Phoenix Contact)
Clamping range
0.2…2.5 mm²
Ambient temperature during
operation
0…+40 °C
Input voltage
18…32 V DC
Humidity rating
5…95 %, non condensing
Typ. power loss at DC 24 V
17 W
EMC interference emission
EN 55011:2007 (class A)
Typ. current consumption at DC
24 V
0,7 A
EMC interference immunity
EN 61000-6-2:2005
Degree of protection
IP20
Analog CH 01…CH 08
Number
8
Connector type
16-pin connector
(Phoenix Contact)
Type
Differential input
Input voltage
± 10 V
Input protection
± 60 V
Insulation
± 0,4 kV
Input resistance
Constructive Layout
Dimensions (H x W X D) in mm
200 x 60.2 x 126.5
Minimum distances:
Front
Top
Bottom
80 mm
25 mm
25 mm
R ≥ 1 MΩ
Design
Aluminum / stainless steel
Input current
I < 10 µA
Color
Silver
Sample frequency
≤ 40 kHz / analog input
Weight
1 kg
Resolution
16 Bit (15+1)
Coupling
DC
Mounting
Gain error
0.025 % +/- 1 digit
DIN rail
EN 50022-35x15
Thickness 2.3 mm
Offset error
0.017 % +/- 1 digit
Static offset
Max. 0.12 %
CMR
100 dB
Certificates
Ground Connection
Connector type
M4 screw on the front plate:
SHIELD
Clamping range
Cable socket for screw M4
CE
For use in industrial and office
areas
Order number: 6AT8000-1BA00-0XA0
For further product details please take a look in the download manual under http://support.automation.siemens.com
Siemens AG
Industry Sector
Control Components and Systems Engineering
P.O.Box 23 55
90713 Fürth
Germany
www.siemens.com/automation
www.siemens.com/siplus-cms
Productmanagement
Thorsten Riemer
I IA CE DE PM 2
Mail: thorsten.riemer@siemens.com
subject to modifications
Printed in Germany
10/2009 © Siemens AG 2009
The information provided in this brochure contains merely
general descriptions or characteristics of performance which
in case of actual use do not always apply as described or which
may change as a result of further development of the products.
An obligation to provide the respective characteristics shall
only exist if expressly agreed in the terms of contract.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third
parties for their own purposes could violate the rights of the
owners.