Lighting
Product Guide
www.ttieurope.com
TTI, Inc. – Never Short on Solutions
www.ttieurope.com 1
TTI, Inc. – Never Short on Solutions
Components for Industrial Lighting
• Street Lamps
• Security and Surveillance
• Energy Saving Controllers
• Architectural Illumination
• Displays and Signs
Applications
Power Supplies
Electronic Ballasts
Motion Sensors
Cable Assemblies
LED Components
2 www.ttieurope.com
Product Types
Circuit Protection
Electro-Magnetic
Relays & Switches
Discretes
Interconnect
Passives
www.ttieurope.com
CONTENTS
About TTI
Page4
LINECARD
Page6
AVX
Page8
Bourns
Page10
Cooper Bussman
Page11
FCI
Page12
Kemet
Page14
Kingbright
Page15
Littelfuse
Page16
Lelon
Page18
Molex
Page19
Murata
Page22
Ohmite
Page25
Omron
Page28
Panasonic
Page29
Phoenix Contact
Page32
Souriau
Page34
TT Electronics
Page35
TDK EPC
Page36
TE Connectivity
Page38
Vishay
Page42
Yageo
Page46
While every effort has been made to ensure that the information
contained within is accurate and up to date, TTI, Inc. makes no
warranty, representation or undertaking whether expressed or
implied, nor does it assume any legal liability, whether direct
or indirect, or responsibility for the accuracy, completeness,
omissions, or usefulness of any information.
Copyright © 2012 TTI, Inc.
www.ttieurope.com 3
About TTI
TTI, Inc. – Never Short on Solutions
Specialist distributor of Passive, Interconnect, Discrete,
Relay & Switch components for Lighting applications
TTI’s European headquarters in Maisach-Gernlinden
occupies 13,000m2, with 10,000m2 of dedicated warehouse
space on three levels. We provide local service in 39 sales
locations across Europe.
With the development of energy saving lighting, longer lifetime
requirements and a proliferation of electronic displays, there is
a greater need for reliable I,P and E and Discrete components
to address these new installations.
Our suppliers are the most innovative and capable in the
electronics industry. Together with them, we put emphasis
on product knowledge, inventory and logistics to provide our
customers with industry leading service support and value.
Why buy from TTI?
Our focused product line and comprehensive supply chain
management solutions have made TTI the supplier of choice
for our OEM and CEM customers world wide.
By focusing on new product introductions, high technology
products and working with Mouser, we provide our customer
and supplier with unparalleled design-in support, ensuring the
best and newest parts are always available.
TTI concentrates on the basic strategy of focusing on our
products and striving to be the best at what we do. No other
company offers the unique combination of benefits we
provide:
• Specialist I, P&E
• Deepest & Broadest Inventory
• Best in Class Support
• Leading Global Suppliers
• Focused Line Card
• Technology Leader
• Only Distributor with Catalogue Division – Mouser
• Opportunity to Consolidate Supplier Base
• Reduced Lead-Times
• Specialist Local Support
• World Class Supply Chain Programs
• Reduced Total Cost of Acquisition
To support your design you can request free of charge
samples from TTI.
4 www.ttieurope.com
Europe’s largest inventory
of Passive, Interconnect, Discrete, Relay & Switch Components
www.ttieurope.com 5
The Passive & Discrete names you trust
The inventory and service you need
Panasonic
Littelfuse
KINGBRIGHT
Bourns
Vishay
●
●
●
●
●
●
Network
●
Power/Wirewound
●
●
●
●
Carbon
Current Sense
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Sensor/Encoder
●
Trimmers
●
Tantalum
●
Ceramic
●
●
●
●
●
●
●
●
●
Aluminium
●
Film
●
Polymer
●
●
Chokes
●
Coils
●
Inductors
●
Transformers
●
●
●
Schottky
●
●
●
●
Zener
●
●
Rectifiers
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Bridge
●
●
Fast Recovery
●
●
General Purpose
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Ultrafast Recovery
●
●
●
●
●
●
●
●
Transistors
FETs
●
IGBTs
●
●
●
●
MOSFETs
●
●
●
●
RF
●
●
●
●
●
●
●
Bipolar/Small Signal
●
●
●
●
SIDACs
TRIAC
●
●
●
●
Optoelectronics
Filters
EMI/RFI
●
●
●
RF/Microwave
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Circuit Protection
Gas Discharge Tube (GDT)
●
Resettable Fuses (PPTC)
●
●
●
Thyristors
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Thermistors (PTC)
●
●
●
●
●
●
Displays
Infrared Emitters
●
●
●
Photo Detectors
●
●
●
●
Solid State Relays
●
●
●
●
●
●
●
●
●
●
●
●
●
Modules
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Voltage Regulators
●
Analog Switches
●
●
Motor Control ICs
●
●
Fiber-Optic Devices
●
Resonators
●
Crystals
●
●
General Purpose
Logic ICs
●
Oscillators
●
●
LED Drivers
●
●
●
●
Others
●
●
●
●
IRDA Transceivers
●
●
●
●
●
●
Optical Sensors
●
●
Couplers
LEDs/LED Modules
Infrared Receivers
Timing Devices
6 www.ttieurope.com
●
●
●
SCRs
●
●
●
Schottky
DIAC
●
●
●
●
Standard Recovery
●
●
●
●
●
Thyristors
●
●
●
●
●
●
●
Magnetics
Ferrite Cores
●
Switching
Capacitors
●
●
Avalanche
Precision/Panel Control
Ferrite Beads
Arrays
ESD Protection
TVS Diodes
Potentiometers & Trimmers
Varistors
TT electronics
●
Foil
Thermistors (NTC)
Toshiba
Film
Fuses
●
Diodes
Resistors
ESD Suppression
Cooper
Bussmann
Yageo
Wima
Vishay Precision
GROUP
Vishay
TE Connectivity
TT electronics
TDK
Syfer CMP
Spectrum
Control
Panasonic
Ohmite
Nichicon
Murata
Littelfuse
Lelon
koa
KEMET
EPCOS
Bourns
Cooper Bussmann
AVX
Discretes
API Delevan
Passives
●
The Connector, Relay & Switch names you trust
The inventory and service you need
*External with supplier joint venture.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●* ●
●* ●
●* ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TE Connectivity
TT electronics
Panasonic
Omron
Meder electronic
HONEYWELL S&C
Bourns
●
●
●
●
●
General Purpose
●
●
●
Military/Aerospace
●
Solid State
High Frequency
●
●
Automotive
●
●
●
●
●
●
Reed
●
●
High Voltage
●
●
Sockets & Accessories
●
Sensors
●
PhotoMOS
●
●
●
●
●
Switches
DIP/SIP
●
Slide
●
Pushbutton
●
●
●
●
●
●
●
●
Rocker/Paddle
●
●
●
●
Toggle
●
●
●
●
Thumb/Push Wheel
●
Tactile
●
●
●
●
Snap Action/Detect
●
Special Purpose
●
Switchlock
●
Key-Switch
●
Navigation
●
●
Wireless
●
●
●
●
●
●
●
●
●
●
●
●
●
Sensors
●
●
●
Speed/Position
●
●
Thermal
●
●
●
●
●
Pressure
●
Military/Aerospace
●
Automotive
●
●
●
●
●
●
Airflow
●
Current
●
Optical
●
●
●
●
●
●
C&K
TE Connectivity
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Spectrum
Control
Souriau
RADIALL
Phoenix Contact
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Panduit
●
Panasonic
Harwin
GLENAIR
FCI
●
●
●
●
●
●
●
●
●
●
●
●
●
Signal
Power
TE Connectivity
●
●
●
●
●
●
Relays
Panasonic
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
OMRON
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
MEDER ELECTRONIC
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
HONEYWELL S&C
●
●
●
Omron
●
●
●
●
●
Molex
●
DELPHI
●
●
●
C&K
●
●
●
Bourns
AVX/Elco
Board-to-Board
1.25mm to 10.00mm pitch
●
Pin Headers & Sockets
●
High Speed Backplane
●
Mezzanine
●
Device-to-Board
IC & PLCC Sockets
●
Memory Card Connectors
●
LED Sockets
Smartcard Connectors
Wire-to-Board/Wire-to-Wire
1.25mm to 10.00mm pitch
●
Discrete Wire
●
FFC/FPC
IDC/Mass Termination
●
Power
●
SCSI I, II, III
●
SATA/SAS/Mini SATA
●
Input/Output
Audio
Circular
D-Subminiature
●
DVI/HDMI
Micro D
Modular Plugs & Jacks
Power
SFP/XFP
RJ/Industrial Ethernet
USB/Mini USB/USB OTG
RF/Coaxial/Microwave
1.0/2.3, 1.6/5.6 & 7/16
BNC (50/75Ω/TNC)
MCX/MMCX
QMA
SMA, SMB, SMC, SSMA
Type F
Automotive/Transportation
Automotive
Agriculture
Commercial Vehicles
Construction
Marine
Mass Transit
Recreational Vehicles
Speciality Connectors
Battery
COTS
Filtered
Hermetic
High Voltage
Industrial
●
Micro Miniature/Nano
●
Military/Aerospace
Space
Solderless Terminals
Insulated
●
Non-Insulated
●
Terminal Blocks
PCB Mounted
DIN Rail Mounted
Tooling
Hand Crimp Tools
●
IDC Presses
●
Semi-automatic Crimp Tools
●
Wire & Cable
Cable Assemblies/Value Add
●
Discrete Wire
●
FFC Jumpers
Flat Ribbon
●
Wire Management & Accessories
Cable Management
●
Backshells
●
Heat Shrink Products
●
Labels & Labelling Systems
Printers & Supplies
Amphenol
Relays & Switches
3M
Connectors
●
●
Sensors
●
●
●
●
●
●
●
www.ttieurope.com 7
AVX
Discrete Wire-to-Board IDC Connectors
The 917X Series of surface mount Insulation Displacement Connectors (IDC) were developed to connect individual
wires directly to a PCB ranging from 14AWG to 28AWG for automotive and industrial applications. The simplicity
of inserting a wire into the connector with a small tool allows a wide range of devices to be connected to the PCB
without the need for soldering.
In SSL applications specifically, these connectors are used to bring power and signal onto the PCB or are used
to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to
conductor of the wire, the housing has been designed to grab the insulation of the wire to provide a positive strain
relief even in the harshest conditions. In case of repair, the wires can be removed and replaced up to three times.
Features & Benefits
• IDC contact provides a gas-tight connection to the PCB for long term
reliability
• Current ratings range from 1A up to 15A
• Optional through and end caps lock in place to provide maximum
strain relief
• Reduced total applied cost versus solder or crimp processes
• Tested to automotive levels on shock, vibration and temperature cycling
for reliability
• Heat endurance testing of 1000 hours at 125°C
• High temperature insulator capable to 260ºC reflow soldering processes
Applications
• Bringing power and signals onto a PCB
• Daisy chaining PCBs together to create a continuous string of boards
• Connecting discrete wire components directly to the PCB
Discrete Wire-to-Board IDC Contacts & Covers
The single 9176-500/400 Series contact and capacitor accepts 18AWG to 24AWG wires and support a 6A
up to 10A current rating. These dual beam contacts are packaged in T&R and provide a large SMT solder
base to provide maximum stability on the PCB. The optional locking strain relief cap acts as the termination
tool for severe vibration applications.
Features & Benefits
• IDC contact provides a gas-tight connection to the PCB
for long term reliability
• Tested to automotive levels on shock, vibration and temperature
cycling for reliability
• Reduced total applied cost versus solder or crimp processes
• Heat endurance testing of 1000 hours at 125°C
• Operating Temperature: -40ºC to +125ºC
Applications
• Connecting discrete wire components directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCBs together to create a continuous string of boards
8 www.ttieurope.com
AVX
The 9276 Series has been developed for a fast and reliable wire-to-board termination in a sleek 2.50mm pitch
SMT package for a general application in industrial and commercial markets. With almost every product on the
market today having to deal with a small number of discrete wires to connect components to a board, the 9276
Series connectors meets this challenge by simply stripping the wire and inserting them into the connector. This
makes the connector very termination friendly within the factory as well as in the field by electrical installers. The
dual contact design carries a maximum current rating of 6A with a minimal PCB footprint.
AVX provides a small insertion/extraction tool which will allow the wires to easily be replaced up to five times.
AVX
Discrete Wire-to-Board Poke Home Connectors
Features & Benefits
• Accepts 18-24AWG Solid and Stranded wires
• Expanded size offering to maximise application potential;
1, 2, 3, 4, 6 & 8 positions
• Simple strip, insert and removal design
• High spring force top contact provides a lance type retention to capture
and retain the wire
• Available in standard white and optional black color
• Operating Temperature: -40ºC to +125ºC
• Heat endurance testing of 1000 hours at 125°C
• Voltage Rating: 250VAC
Applications
• Bringing power and signals onto a PCB
• Daisy chaining PCBs together to create a continuous string of boards
• Connecting discrete wire components directly to the PCB
SMT Board-to-Board Connectors
The 9159 Series of board-to-board interconnect has been designed specifically for the unique Solid State
Lighting (SSL) market requiring coplanar (horizontal-to-horizontal) PCB mating with a 3A current rating in the
smallest package available. This solution permits two PCBs to be mated end-to-end creating strips of LED
lighting. These single sided SMT connectors are perfect for both FR4 and metal boards where you need to butt
the boards up together to minimise LED separation. Availability of both white and black insulation colors make
them perfect for lighting as well as industrial applications. With sizes from 2p-6p, these high reliability connectors
boast gold plated beryllium copper receptacle contacts for harsh environments.
Features & Benefits
• Single sided SMT; supports FR4 and metal PCBs
• 5.50mm mated width; minimises PCB space to decrease LED pitch
• Gold plated BeCu spring contacts; reliability for harsh environments
• Operating Temperature: -40ºC to +125ºC
• Heat endurance testing of 1000 hours at 125°C
• Voltage Rating: 125VAC
Applications
• Coplanar PCB mating in SSL products
• LED linear lighting strip
www.ttieurope.com 9
BOURNS
LSP Series LED Shunt Protector
Bourns® LSP Series protectors are electronic shunts that provide a current bypass when an LED element in an
LED series string fails open circuit. This ensures the remaining string of LEDs will continue to function. There are
many cases where high reliability of the LED lighting must be maintained, such as LCD backlighting, transport
lighting, avionics, intrinsically safe and low maintenance lighting.
Features & Benefits
• Fast switching
• Automatic reset
• SMB package DO-214AA
• Suitable for industrial lighting environments
Applications
• LED streetlights
• LCD backlighting
• Display lighting
• Intrinsically safe lighting
Electrical Characteristics (@ TA = 25°C Unless Otherwise Noted)
Parameter
Test Conditions
VD = VDRM
IDRM Repetitive peak off-state current
dv/dt = 750V/ms,
V(BO) Breakover voltage
RSOURCE = 300
IH Holding current
IBO Breakover current
VT On-state voltage
IT = 1A, di/dt = 30mA/ms
di/dt = 0.8A/ms
IT = 1A
LED Lighting Solutions
The SMAJxxCA Series can provide voltage signal clamping and protection
against ESD, EFT and Surge transients applied within the circuitry.
The SRU1048 Series offers high-current handling and low DC resistance
in a compact form factor.
The CRA2512 Series are current sense resistors in standard 2512 chip
sizes with a high-power density (3W) and low TCR (75PPM). The surface
temperature of the resistor is lower than similar parts of the same size
from other manufacturers, reaching typically 48˚C under a load of 1W.
The PWR263S-20 Series are SMD resistors in D2PAK casings with very
low-inductance and high-power ratings. They can be used with linear
current regulators to limit the current especially in high luminosity LEDs
which consume a lot of current. These resistors also do not exhibit high
surface temperatures which is a requirement in many designs.
The Bourns® MF-MSMF075 Multifuse® polymer PTC provides overcurrent
and overtemperature protection.
10 www.ttieurope.com
LSP0600
LSP0900
LSP1300
LSP1800
Min.
Nom.
6
9
13
18
5
30
Max.
10
16
18
26
33

75
1.2
Unit
μA
V
mA
mA
V
COOPER BUSSMANN
Inductor Selection for LED Driver Designs
COOPER BUSSMAN
The LED needs to be properly driven to ensure optimal performance and long life.
Designing and implementing an effective driver with suitable topology is the key to
successful LED lighting circuits.
The topologies used in present day LED drivers are:
• Buck • SEPIC • Boost • Flyback • Forward • Buck-Boost
Each topology is selected according to the required power level and cost.
Semiconductor companies have developed Integrated Circuits (ICs) to drive LEDs.
Typical Circuits for LED Driver Applications
Buck Circuit
Boost Circuits
Boost circuits are power converters
with an output DC voltage greater than
its input DC voltage. Boost circuits
generally require one inductor.
A buck circuit regulates input DC
voltage down to a desired DC voltage.
Buck circuits generally require one
inductor.
Buck Boost
Flyback Circuits
The Buck-Boost circuit generates an
output voltage that is either higher or
lower than the input voltage. The
polarity of the output is opposite to that
of the input. Buck-Boost circuits
generally require one inductor.
Single Ended Primary Inductance Converter
(SEPIC) Circuit
The SEPIC circuit is a popular
Buck-Boost topology that allows the
output voltage to be higher or lower
than the input voltage. The SEPIC
output polarity is the same as the input.
SEPIC circuits generally require two
identical inductors that can be individual
inductors or a dual-winding inductor.
The Flyback transformer combines
isolation, energy storage, and voltage
scaling. The Flyback allows multiple
output voltages as well as can provide
plus and minus outputs by using tapped
windings. Flyback circuits require a
custom-designed flyback transformer.
Coiltronics designs and makes custom
and semi-custom transformers to match
flyback circuit design requirements.
Forward Circuits
The Forward transformer only provides
isolation and voltage scaling. The
Forward allows multiple output voltages
as well as can provide plus and minus
outputs by using tapped windings. A
separate energy storage device
(inductor) is needed.
Forward circuits require a customdesigned forward transformer and an
output inductor. Coiltronics designs
and makes custom and semi-custom
transformers to match forward circuit
design requirements as well as has a
number of output inductor offerings.
Part number series
MPI4040 Series
MPA7030
DR Series
DR1030, DR1040, DR1050, DR73, DR74, DR124, DR125, DR127
LDS Series
LDS0705
SD Series
SD3110, SD3112, SD3114, SD3118, SD3812, SD3814, SDH3812, SD10, SD12, SD14, SD18, SD20, SD25, SD52, SD53, SD6020, SD6030, SD7030, SD8328, SD8350
SDH Series
SDH2812, SDH3812
Uni-Pac Series
UP2.8B, UP0.4C, UP2C, UP1B, UP2B, UP3B, UP4B
LD Series
LD1, LD2
www.ttieurope.com 11
FCI
Connectors for Lighting Applications
BOARD-TO-BOARD
2.54mm BergStik™ Unshrouded Headers
Straight
Right-Angle
Stacking
Base PN
Single Row
77311
95293*
Double Row
77313
95278*
Single Row
77315
Double Row
77317
Single Row
54121
Double Row
54122
2.54mm Dubox™ PCB Receptacles
54242*
Base PN
Straight
Right-Angle
Single Row
76341
91601*
Double Row
76342
89898*
Single Row
89882
71607*
Double Row
89883
71609*
2.00mm Minitek™ Unshrouded Headers
Base PN
Vertical
Double Row
57102
Right-Angle
Double Row
98423
Stacking
Double Row
591X2
2.00mm Minitek™ Shrouded Headers
57202*
59202*
Base PN
Straight
Double Row
98414
98424*
Right-Angle
Single Row
91269
95000*
Double Row
98464
2.00mm Minitek™ PCB Receptacles
Base PN
Straight
Double Row
63453
55510*
55508*
91596*
1.27mm Minitek™ Shrouded Headers
Base PN
Straight
Double Row
20021211
Right-Angle
Double Row
20021212
1.27mm Minitek™ PCB Receptacles
20021221*
Base PN
Vertical
Double Row
20021311
20021321*
20021323*
* Surface Mount
12 www.ttieurope.com
FCI
WIRE-TO-BOARD
2.54mm Dubox™ CTW System
Base PN
Straight Headers
Right-Angle Headers
Housings
Single Row
76384
Double Row
76382
Single Row
76385
Double Row
76383
Single Row
65239
Double Row
65240
Terminals
76347
2.00mm Minitek™ CTW System
Base PN
Straight Headers
Double Row
98414
98424*
Right-Angle Headers
Single Row
91269
95000*
Double Row
98464
Single Row
69305
90312
Double Row
69307
90311
Housings
Active Latch Housings
10073599
Terminals
77138
Base PN
Straight Headers
Single Row
10114829
10114828*
Right-Angle Headers
Single Row
10114831
10114830*
Housings
Single Row
10114826
Terminals
FCI
1.25mm CTW System
10114827
* Surface Mount
CABLE-TO-BOARD
2.54mm Quickie® IDC System
Base PN
Shrouded Headers
Eject Latch Headers
Straight
75867
Right-Angle
75869
Straight
71918
Right-Angle
71922
IDC Receptacles
71600
2.00mm Minitek™ IDC System
69830
Base PN
Shrouded Headers
Eject Latch Headers
Straight
98414
Right-Angle
98464
Straight
10078991
IDC Receptacles
98424*
10078995*
89947
1.27mm Minitek™ IDC System
Base PN
Shrouded Headers
Eject Latch Headers
Straight
20021521
Right-Angle
20021512
Straight
20021611
Right-Angle
20021612
IDC Receptacles
20021621*
20021444
* Surface Mount
TERMINAL BLOCKS
Pluggable Terminal Block – Signal
Base PN
3.50mm & 3.81mm
5.00mm & 5.08mm
Plug
20020008
Straight Socket
20020107
Right Angle Socket
20020110
Plug
20020008
Straight Socket
20020107
Right Angle Socket
20020110
Plug
20020516
Straight Socket
20020620
Right Angle Socket
20020618
Pluggable Terminal Block – Power
20020004
20020006
Base PN
7.62mm
Fixed Terminal Block – Signal
Base PN
3.50mm & 3.81mm
Fixed Horizontal
20020327
5.00mm & 5.08mm
Fixed Horizontal
20020316
Fixed Terminal Block – Power
Base PN
7.62mm
Fixed Horizontal
20020705
* = Surface Mount Product
www.ttieurope.com 13
KEMET
KEMET Solutions for LED Street Lighting
Features & Benefits
• Replacement opportunity for mercury and sodium vapor lamps in support of European Union Regulation EC 245/2009
• Wide array of solutions to accommodate design parameters such as output power and string voltage
•A
ll products designed to fulfill application lifetime requirement of > 20 years
• Decades of experience in lighting, industrial and automotive applications
• UL, CECC and ENEC approvals
• Standard, optimised and custom designs
Applications
•A
C/DC converters, EMI filters
• LED driver circuits
• Microcontroller units
KEMET Products
Product Family
KEMET Series
Form
Standard Film
X2: R46, PHE840, F861 (NEW)
Box Type, Wire Terminals
X & Y Capacitors
Y2: R41, PHE850, F881 (NEW)
Box Type, Wire Terminals
Standard Film
R75, F46X (NEW), PHE426, PHE450
Box Type, Wire Terminals
Aluminium Electrolytic
PEG 124, PEG 225
Axial
Ta MnO2
T491, T494, T495
SMD
Ta KO
T520, T521, T525, T530
SMD
Ceramics
Standard X7R, X5R
SMD
Microcontroller Unit
Ceramics
Standard X7R, X5R
SMD
Speciality & Custom Solutions
Available upon request. Please contact your local TTI representative.
AC/DC Converter, EMI Filter
LED Driver Circuit
Focus Product: PEG124
Features & Benefits
• Outstanding performance
• Customised solutions
• Standards IEC384-4 Long Life Grade 40/125/56 CECC 30301-053
•T
emperature range: -40°C to +125°C
• Shelf life: 10 years (at 0V and +40°C)
• Very low field failure rate
• ISO/ TS 16949 and ISO 14001 approval
Axial design allows use of aluminium lid which
will not delaminate
Specially designed gasket minimises
electrolyte evaporation
Natural Conv
UR
CR
DxH
Iac
125˚C ≥5kHz
tan∆
20˚C
0.1kHz
ESR (max)
125˚C
≥5kHz
ESR (max)
20˚C
100kHz
40V
3000μF
20x37mm
4.9A
7.9%
13.4mOhm
24mOhm
14 www.ttieurope.com
KINGBRIGHT
Dot Matrix Modules: TA/TC12-41, TA/TC13-11 and TA/TC16-31
Features & Benefits
•T
A/TC12-41 Series, a 5 x 7 dot matrix with a matrix height of 28.11mm
and height dimensions of 30.0mm and 22.0mm in width
•T
A/TC13-11 Series, a 6 x 7 dot matrix with a matrix of 30.50mm and
height dimensions of 34.0mm in height and 23.8mm width
•T
A/TC16-31 Series, a 5 x 7 dot matrix with a matrix height of 34.00mm
and dimensions of 42.0mm in height and 25.0mm width
• Black surface to reproduce the best possible contrast
• Can be lined up both horizontally and vertically
•A
vailable in standard colors
•A
vailable in super-bright versions of InGaAlP chips
• RoHS compliant
KPTD-1608 Series
KINGBRIGHT
KPG-1608 Series
Features & Benefits
• Ultra-thin 0603 package (1.6mm
x 0.8mm) with a height of just
0.25mm
• Viewing angle of 120˚
• Low power consumption
• Wide viewing angle
•A
vailable in standard colours
• Compatible with automatic
placement equipment
• Moisture sensitivity level 3
• Package: 2000pcs/reel
Applications
• Membrane keyboards
• Mobile phone keypad indicator
and backlight
• Flat backlights for LCDs
• Switch and symbol
• RoHS compliant
Features & Benefits
• 1.6mm x 0.8mm x 0.95mm with
0.70mm dome lens feature
• Viewing angle of 60˚
• High typical luminous intensity
output
up to 3000mcd at 20mA
•T
emperature ratings of -40˚C to
+85˚C
• Low power consumption
• Various colours available
• Moisture sensitivity level 3
• Package: 2000pcs/reel
• RoHS compliant
Applications
• Interior & exterior automotive
lighting
• Backlight & indicator applications
KPB-2012 Bi-Color SMD-LED in 0805 Package
Ultra Thin SMD Display Technology
Features & Benefits
Features & Benefits
• Small package size 2.0mm x
1.25mm x 1.1mm (W x L x H)
• Bi-colour and low power
consumption
• Luminous intensity of typically
200mcd at IF 20mA
• Wide viewing angle of 150˚
• Moisture sensitivity level 3
• Package: 2000pcs/reel
• RoHS compliant
Applications
• Ideal for backlight and indicator
• Sizes in 0.2”, 0.3”, 0.4”, 0.56”
and 0.8”
• Lightweight and low profile design
• Bright and clear displaying
capability
•A
utomation-friendly tape
• Robust design reduce assembly
cost and eliminate product
deterioration
• Moisture sensitivity level 2a
• RoHS compliant
www.ttieurope.com 15
LITTELFUSE
PLED Open LED Protectors
PLED Series open LED protectors provide a switching
electronic shunt path when an LED in an LED string fails
as an open circuit. This ensures that the remaining string
of LEDs will continue to function if a single LED does not.
PLED series devices were designed to enable higher
reliability in outdoor LED lighting applications such as
street lighting, outdoor signage, aircraft runway lighting,
roadside warning lights and other applications. Compatible
with one, two and three watt LEDs that have a nominal 3V
forward characteristic, PLED Series devices are available
in two surface mount packages, the DO-214 and the Quad
Flat Pak No-lead (QFN). The QFN’s low profile, chip scale
package (CSP) is ideal for dense board applications.
Features & Benefits
• Fast switching
•A
utomatically resets after power cycle
•A
vailable in low profile, small footprint QFN and Standard DO214AA
packages
• Compatible with industrial lighting environments
• Compatible with PWM frequencies up to 30kHz
• RoHS compliant and halogen-free
Typical LED String Configuration
Environmental Specifications
• Solution: PLED devices
experience the compliance
voltage and turn on to conduct
current around the open LED
• Result: Remaining LED’s stay
illuminated. Replacing bad LED
will restore original function and
turn off the PLED
• In many applications, the
dimming of a single LED may not
be critical or even noticeable
High Temperature Voltage Blocking MIL-STD-750: Method 1040, Condition A
80% min VDRM (VAC-peak), 150°C,
504 hours
PLED
Open
LED
Constant
Current
Source
Active PLED
• Note that PLED power dissipation
is lower than the LED, lowering
total system power
Temperature Cycling
MIL-STD-750: Method 1051
-65°C to 150°C, 15-minute dwell,
100 cycles
Biased Temperature
& Humidity
EIA/JEDEC: JESD22-A101
52VDC, 85˚C, 85%RH, 1008 hours
High Temperature Storage
MIL-STD-750: Method 1031
150°C, 1008 hours
Low Temperature Storage
-65°C, 1008 hours
Thermal Shock
MIL-STD-750: Method 1056
0°C to 100°C, 5-minute dwell,
10-second transfer, 10 cycles
Resistance to Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Key Performance Parameters
• Minimum breakdown voltage: Higher than max LED(s) voltage
• Maximum breakdown voltage: Lower than LED supply compliance voltage
• Maximum continuous current: Higher than LED continuous current
Electrical Characteristics (All parameters are measured at T=25˚C unless otherwise noted)
VBR breakdown
Part Number
Marking
PLED6Q12
PL6
PLED6S
PL6
PLED9Q12
PL9
PLED9S
PL9
PLED13Q12
PL13
PLED13S
PL13
PLED18Q12
PL18
PLED18S
PL18
16 www.ttieurope.com
Volts
VDRM
breakdown
IH
IS
IT@VT
VT @ IT = 1 Amp
Critical rate of
rise dV/dt
Volts
mAmps
mAmps
Amps
Volts
Volts
Min
Max
Min
Min
Max
Max
Max
Max
6
16
6
9
18
9
5
100
1.0
1.2
250V/μs
13
26
13
18
33
18
LITTELFUSE
Lighting Applications
Home Lighting
Incandescent Light Dimmer
• Wide range of dimmer designs from basic rotary dimmer to sophisticated microprocessor control
• Uses range from residential to high-wattage commercial applications
• Dimmers make older incandescent technology “greener”
Home Fluorescent Lighting
• Older magnetic ballast designs can use switching thyristors in the lamp starter circuit
• Q6004LT Quadrac
• Newer electronic ballast designs may need robust AC input protection
Commercial Lighting
Commercial Fluorescent Lighting
• New designs are almost exclusively electronic ballasts
• Commercial lighting uses 277VAC input, requiring a special fuse
HID Lighting
• Metal Halide Bulbs
• K2401G Family Multipulse SIDAC
LITTELFUSE
CFL (Compact Fluorescent Lamps)
• CFL failure modes are under review for safety
• Overload protection may be mandated, requiring a real fuse
LED Lighting
•A
dvantages:
– Highly directional light
– Energy savings – always on
– Long bulb life/less maintenance
– Direct form-factor replacements
– Custom light colors
– Low heat output ideal for refrigerated displays
•A
C input circuitry similar to CFLs
• PLED opportunity for Hi-Rel applications using high current LEDs (>300mA)
Signage
• Commercial signs use a variety of lighting technologies
• Flashing incandescent bulb signs will use triacs
• LED signs may use AC input protection and PLED devices
• Matrix LED signs use sophisticated AC input protection
Industrial/Municipal Lighting
www.ttieurope.com 17
LELON
High Voltage Pen Type
RGL
Features & Benefits
RPL
• 105°C, for general purpose
• Ø8 ~Ø18 with large permissible ripple
current
• Pen type included
• RoHS compliance
Features & Benefits
RQL
• 105°C, 5000 hours assured
• Ø10 ~ Ø18 with large permissible
ripple current
• Pen type included
• RoHS compliance
Features & Benefits
• 105°C, 10000 hours assured
• Ø10 ~ Ø18 with large permissible
ripple current
• Pen type included
• RoHS compliance
Lead Spacing and Diameter (mm)
ØD
8
P
3.5
Ød
α
β
10
12.5
16
18
5.0
7.5
0.8
0.6
2.0
0.5
Lead Spacing and Diameter (mm)
ØD
10
P
5.0
Ød
0.6
α
β
12.5
16
18
7.5
0.8
2.5
0.5
Lead Spacing and Diameter (mm)
ØD
10
P
5.0
Ød
0.6
α
β
12.5
16
18
7.5
0.8
2.5
0.5
High Reliability High Voltage Type
RXB
Features & Benefits
RXQ
• 105°C, 5000 hours assured
• Suitable for switching power supplies,
UPS, ballast
• Smaller size with large permissible
ripple current
• RoHS compliance
Features & Benefits
• 105°C, 8000 ~ 10000 hours assured
• Suitable for switching power supplies,
UPS, ballast
• Smaller case size current
• RoHS compliance
Lead Spacing and Diameter (mm)
ØD
10
P
5.0
Ød
0.6
α
β
12.5
16
18
7.5
0.8
1.5
0.5
Lead Spacing and Diameter (mm)
ØD
10
P
5.0
Ød
0.6
α
β
12.5
16
18
7.5
0.8
1.5
0.5
Organic Conductive Polymer Aluminium Electrolytic Capacitor
VUA
Features & Benefits
OVK
• 6.3 ~ 18Ø, 125°C, 1000 ~ 2000 hours
assured
• Chip type high temperature range,
for +125°C use
• For automobile modules and other high
temperature applications
• RoHS compliance
Features & Benefits
• 105°C, 5000 hours assured
• Ultra low ESR, solid capacitors of SMD type
• RoHS compliance
Lead Spacing and Diameter (mm)
ØD
L
A
6.3
5.7±0.3
6.6
6.3
7.7±0.3
6.6
8
6.5±0.3
8.4
8
10±0.5
8.4
10
10±0.5
10.4
12.5
13.5±0.5
13.0
12.5
16±0.5
13.0
16
16.5±0.5
17.0
18
16.5±0.5
19.0
B
6.6
6.6
8.4
8.4
10.4
13.0
13.0
17.0
19.0
C
7.4
7.4
9.2
9.2
11.2
15.0
15.0
19.0
21.0
W
0.5~0.8
0.5~0.8
0.5~0.8
0.7~1.1
0.7~1.1
1.1~1.4
1.1~1.4
1.1~1.4
1.1~1.4
P ± 0.2
2.0
2.0
2.3
3.1
4.7
4.4
4.4
6.4
6.4
Lead Spacing and Diameter (mm)
ØD
L
A
6.3
5.9+0.1/-0.3
6.6
8
6.7 ± 0.3
8.4
10
7.7 ± 0.3
10.4
B
6.6
8.4
10.4
C
7.4
9.2
11.2
W
0.5 ~ 0.8
0.7 ~ 1.1
0.7 ~ 1.1
P ± 0.2
2.0
3.1
4.7
Lead Spacing and Diameter (mm)
ØD
L
A
8
12.0 ± 0.5
8.4
10
9.9+0.1/-0.3
10.4
10
12.7 ± 0.5
10.4
B
8.4
10.4
10.4
C
9.2
11.2
11.2
W
0.7 ~ 1.1
0.7 ~ 1.1
0.7 ~ 1.1
P ± 0.2
3.1
4.7
4.7
OCVU
Features & Benefits
• 125°C, 1000 ~ 2000 hours assured
• Ultra low ESR, solid capacitors of SMD type
• RoHS compliance
18 www.ttieurope.com
MOLEX
Mini-Fit H2O™ Sealed Interconnect System
4.20mm (.165") Pitch
Features & Benefits
• IP67-rated connector ensures a water and dust-tight interconnection
for use in outdoor applications
• Receptacle and plug housings are shipped with interface and wire seals
pre-installed to lower applied cost by reducing installer assembly time
• Positive-locking system ensures the connectors are securely mated and
prevents accidental un-mating
• UV-stabilised, molded materials can be used in applications exposed to
direct sunlight
• Can be used with 18 and 20 AWG wires and accommodate multiple
applications
• Small overall profile for use in tight spaces
Applications
• Lighting
– Retail & hospitality lighting
– Outdoor lighting
– Office & industry lighting
• Vending
– Drink dispensers
– Food service equipment
• Automotive/Motorcycles
• Medical
• Industrial Equipment
– Outdoor lighting
– Conveyer-belt controls
• Outdoor entertainment
– Hot tubs
– Swimming pools
• Recreation vehicles
– ATV
– Golf carts
– Boats
– Jet skis and snowmobiles
• Material handling equipment
– Forklifts
– Agricultural equipment
• Solar and renewable energy
Series numbers 46055/46056/46064/46065
MOLEX
The sealed Mini-Fit H2O™ IP67-rated system with pre-installed,
integrated interface and wire seals meet the need for weatherproof,
compact connections in wire-to-wire applications up to 9.0A per circuit
and contribute to lower applied costs compared to connectors with
manually installed seals.
The Mini-Fit H2O product family consists of plug and receptacle
assemblies and male and female crimp terminals. The plug and
receptacle assemblies are provided with the interface and wire seals
pre-installed, providing time savings to the customer. The terminals
have a new ‘wingless’ design that will not damage seals upon installation
or removal. Terminals will accept both 18 and 20AWG, UL 1015 wires.
The Mini-Fit H2O housings are molded from a UV-stabilised, UL 94V-0
material. The Mini-Fit H2O connector is the latest addition to the Mini-Fit
product family.
Mizu-P25™ 2.50mm (.098") Pitch Miniature Waterproof
Connector Systems
Molex’s Mizu-P25™ miniature wire-to-wire connectors provide the
smallest size and highest level of dustproof and waterproof protection.
The system is IP67 rated, which ensures connector integrity when
submerged in up to one meter of water. Ideal for applications such as
motorcycles or air conditioners that continue to pack more complicated
electronics into smaller spaces. The Mizu-P25™ system provides
assurance that dust or water will not interfere with signal integrity. The
Mizu-P25™ family includes two sub-families: the 52213/52266 type, which
is rated up to 125V; and the 52116/52117 type, rated up to 250V. Both
systems offer features such as integral sealing and secure positive locks.
In addition, both versions provide some of the smallest mated diameters
of any similar system.
Features & Benefits
• Stabilising bump at tip keeps terminal in place during mating
• Unique spring-beam design provides high pressure and small deflection
for high vibration application
• Raised body design provides polarization
• Seal stopper provides waterproof protection and low terminal
insertion force
• One-body wire seal enables tighter spacing between terminals
• Inner positive lock saves space and protects latch area
Applications
• Lighting
– Retail & hospitality lighting
– Outdoor lighting
– Office & industry lighting
• Mirror harness
• Lamp harness
• Air conditioning system
• Powered rear view mirrors
• LED street lights
• Vending machines
Series numbers 50147/50148/52266/52213/50038/50039/52116/52117
www.ttieurope.com 19
MOLEX
Flexi-Mate™ 3.70mm (.146") Pitch Board-to-Board and
Wire-to-Board Connector System, Two Circuits
Designed to meet the backlighting needs of LED TVs and room lighting applications, the new Flexi-Mate family of connectors is the first of its kind on
the market to provide a full range of both board-to-board and wire-to-board solutions. Flexi-Mate design was chosen above other designs because it
met the needs for flexibility and space savings. The Flexi-Mate system includes board-to-board connectors that are used to snap together small panels
containing LED lights. The system also includes a wire-to-board option to connect the LED boards to the main power board; a terminating connector is
also available that is used as a type of shorting device to complete an open-loop signal. The system provides designers several different interconnect
options. The 3.00mm (.118") mated height also meets the needs of TV and room lighting units that continue to strive for thinner designs.
Features & Benefits
• Board-to-board, wire-to-board and terminator options
• Positive side latches on crimp housing
• Dual-contact wire-to-board and board-to-board terminal design
• Mating guide features on PCB connectors
• Shrouded contacts
• Meets needs of LED TVs and lighting equipment that use
interconnecting LED panels
• Space savings and easy mating/unmating
• Ensures reliable electrical contact
• Helps facilitate mating and provide smooth insertion
• Protects contact area
Applications
• Lighting
– Retail & hospitality lighting
– Outdoor lighting
– Office & industry lighting
• LED TVs
• LED 3D TVs
• Edge-lit LED BLU TVs
• LCD panels
•T
rack lighting for rooms
•A
ny application requiring space
savings in width dimension area
Series numbers 503471/503469/503474/503473/503485
IllumiMate™ 2.00mm (.079") Pitch Wire-to-Board Connector
System, Narrow Width, Four Circuits, SMT, Positive Lock
Designed to meet the needs of thin-screen LED TVs, the new IllumiMate
family of wire-to-board connectors offers narrow width, along with cost
and performance advantages. LED TVs are one of the hottest new
items in the consumer electronics world. The technology is so new
that consumers are still learning what it is. A LED TV is a LCD TV.
The difference is a LED TV uses light-emitting diodes for backlighting,
whereas original-generation LCD TVs use cold cathode fluorescent
backlighting. The advantages of LED include better resolution, a slimmer
design and lower power consumption. The LED lights can be located on
a bus-bar across the middle of the screen or on the edge of the panel in
order to avoid shadowing. IllumiMate also offers the most robust positive
locking design. In addition, the connectors are also halogen-free to meet
global environmental requirements.
Features & Benefits
• Ultra-narrow mated width (6.35mm)
• Inner dual-positive-lock design
• LCP material
• Dual contact terminal design
• Polarising ribs inside header
• Fully shrouded housing
• Meets needs of thin-screen LED TVs and other
compact applications
• Space savings and secure mating retention
• Withstands high-temperature environments
•A
dded electrical contact assurance
• Facilitate mating and provide pin protection
• Provides protection to terminal contact area
20 www.ttieurope.com
Applications
• Lighting
– Retail & hospitality lighting
– Outdoor lighting
– Office & industry lighting
• LED TVs
• LED 3D TVs
• Edge-lit LED BLU TVs
• LCD panels
• Plasma display panels
• Any application requiring space savings
in width dimension area
Series numbers 104046/104047/104466
MOLEX
LED Array Holder
Molex’s LED Array Holder, ideal for OEM light-fixture manufacturers,
simplifies the LED installation process for the energy-efficient arrays and
reduces installation time with compression contacts that eliminate hand
soldering. LED technology has been proven to reduce the amount of
energy consumed and is becoming a more reliable, efficient and userfriendly way for accommodating general illumination requirements. Using
unmatched interconnect technology, Molex provides a solderless solution
to mounting LED arrays into OEM designs. LED array holders simplify
the LED installation process by eliminating the need for hand or SMT
soldering and expensive SMT equipment. The holders allow customers
to install LED arrays quickly into fixtures, enable field replacements and
facilitate upgrades to current applications.
Features & Benefits
• Compression contacts to power array provide stable connection in
high-ambient temperature and simplifies the LED installation process
by eliminating hand soldering or expensive Surface Mount Technology
(SMT) equipment and reduces installation time
• Double-ended wire-trap terminal to attach power source allows for wiring
serial or parallel LED sequences, ensuring ease of array assembly
• Screw-mount attachment method for securing array to heat sink provides
robust attachment between LED and heat sink
• High-temperature thermoplastic housing supports high heat-generating
environments
• Overall array holder form factors are 42.50 by 26.80mm (1.67" by 1.06"),
ideal for lamp and small-fixture applications, including MR16 or track lighting
Applications
• Retail and hospitality
• Office lighting
MOLEX
• Protective cover over wire traps and contacts facilitates optional potted
applications
Series numbers 180250/180260/180190/180160/180220
www.ttieurope.com 21
MURATA
Murata Solutions for LED Lighting
(Switching power supply circuit for LED lighting)
Capacitors
Bulb Type LED (Isolated)
C1
C2
C2
DC10~100V
L1
C4
C6
C5
C8
C7
Controller
IC
C3
No.
Function
C1
C2
C3
X cap
Y cap
Primary-secondary isolation
C4
C5
Smoothing EMI filter
C6
C7
C8
Snubber
Snubber
Output smoothing
MLCC
(Reflow soldering)
GA3/Type GB (X2) AC250V (rms)
GA3/Type GF (Y2) AC250V (rms)
GA3/Type GF (Y2) AC250V (rms)
GRM/X7R/DC630~1000V
GR3/X7T/DC250~630V
GRM/X7R/DC250~630V
GRM/U2J/DC630~1000V
GRM/X7R/DC25~100V
Bulb Type LED (Non-isolated)
C1
Disc lead wire type
(Flow soldering)
DE1/Type KX (Y1) AC250V (rms)
DE1/Type KX (Y1) AC250V (rms)
RDE/X7R/DC630V (※1)
RDE/X7T/DC250~630V
RDE/X7R/DC250V/630V
RDE/U2J/DC250V/630V
RDE/X7R/DC25~100V
―
DES•DEH DC500V/DC1kV
DES•DEH DC500V/DC1kV
―
L1
MLCC + lead wire
(Flow soldering)
RDE/X7R/ AC250V (rms)
DC10~100V
C2
C4
C2
C8
C5
L2
Controller
IC
No.
Function
C1
C2
X cap
Y cap
C4
C5
Smoothing EMI filter
C8
Output smoothing
22 www.ttieurope.com
MLCC
(Reflow soldering)
GA3/Type GB (X2) AC250V (rms)
GA3/Type GF (Y2) AC250V (rms)
GRM/X7R/DC630~1000V
GR3/X7T/DC250~630V
GRM/X7R/DC25~100V
Disc lead wire type
(Flow soldering)
―
DE1/Type KX(Y1) AC250V(rms)
―
―
MLCC + lead wire
(Flow soldering)
RDE/X7R/AC250V
RDE/X7R/DC630V (※1)
RDE/X7T/DC250~630V
RDE/X7R/DC25~100V
MURATA
Fluorescent Style LED Light (Isolated)
PFC
AC100~250V
C1
C2
DC10~100V
L1
C4
C5
C2
C6
C8
C7
Controller
IC
C3
No,
C1
C2
C3
C4
C5
C6
C7
C8
MLCC
(Reflow soldering)
X cap
GA3/Type GB(X2) AC250V(rms)
Y cap
GA3/Type GF(Y2) AC250V(rms)
Primary-secondary Isolation GA3/Type GF(Y2) AC250V(rms)
GRM/X7R/DC630~1000V
Smoothing EMI filter
GR3/X7T/DC250~630V
Snubber
GRM/X7R/DC250~630V
Snubber
GRM/U2J/DC630~1000V
Output smoothing
GRM/X7R/DC25~100V
Function
DE1/Type KX (Y1) AC250V (rms)
DE1/Type KX (Y1) AC250V (rms)
―
DES•DEH DC500V/DC1kV
DES•DEH DC500V/DC1kV
―
MLCC + lead wire
(Flow soldering)
RDE/X7R/AC250V (rms)
RDE/X7R/DC630V (※1)
RDE/X7T/DC250~630V
RDE/X7R/DC250V/630V
RDE/U2J/DC250V/630V
RDE/X7R/DC25~100V
C9
MURATA
AC Driven LED Light
Disc lead wire type
(Flow soldering)
No.
C9
Function
Current limit (ballast)
MLCC
(Reflow soldering)
GR3/DC450V (AC100V line)
GRM/DC1kV (AC200V line)
Disc type
(Flow soldering)
―
―
MLCC+ lead wire type
(Flow soldering)
RDE/X7T/DC450V (AC100V line)
RDE/DC1kV (11Q1, AC200V line)
Thermistors
Overcurrent and Overheat Protection, Overheat Sensing
Over Current & Overheat Protection
Overheat Sensing
• PRG en PTGL Series
• Limiting current though LED automatically,
according to ambient temperature rise
• PRF and PTFM Series
• Shutting down LED at overheat working with
LED driver
Temperature Sensing NTC Thermistor
Features & Benefits
• NCP and NXFT Series
• Offering accurate temperature detection
• SMD type is helpful for miniaturising circuits because of its small size
and light weight
• Excellent Thermal response due to small size
• Solid-state construction provides excellent resistance to mechanical
vibration and impact resistance
• Contactless operation provides noiseless operation
www.ttieurope.com 23
MURATA
PIR Sensor
(Pyroelectric Infrared Sensor) – Energy Saving
Features & Benefits
•T
he smallest PIR sensors in the world
• Surface mount devices available
• Small package size available in re-flow soldering process
•A
imed at a broad range of energy saving applications in consumer
appliances
• Low current consumption
• Cost effective
The following customised lenses are also available: ML0658,
IML-0642, IML-0669
Lighting Applications
Murata offers a full range of products for lighting applications
Sensor/Control Circuit
• Pyroelectric Infrared Sensors, IRS Series
•T
rimmer Potentiometers, PVG3 Series
• Ceramic Resonators, CSTLS/CSTCE/CSTCR Series
•T
hermistors, PRF/NCP Series
Driver
• Ceramic Resonators, CSTLS/CSTCE/CSTCR Series
•T
hermistors, PRF/NCP/NXFT Series
LED Module
•T
hermistors, PRF/PTF/NCP Series
Remote Controller
• Chip Multilayer Antennas, LDA Series
• Chip Dielectric Antennas, ANC Series
• Coaxial Connectors Series
Power Supply Unit
• Monolithic Ceramic Capacitors for Medium Voltage, GR/GA Series • High Voltage Ceramic Capacitors, DEA/DES Series
• Safety Standard Certified Ceramic Capacitors, Type KX/KY
•T
rimmer Potentiometers, PVG3 Series
•T
hermistors, PRF/PRG/PTG/NCP/NTP Series
24 www.ttieurope.com
OHMITE
Light Fantastic
Lighting technology is changing fast. LEDs, organic LEDs, superbright LEDs and whatever the next
generation of lighting may bring. Ohmite’s designers are working just as fast to ensure that your lighting ideas
can be brought to life with solutions which will match the most demanding applications and specifications.
From resistors through to sophisticated heatsinks, Ohmite has the components which will make your lighting
project the success you want it to be. Here are some other successes we are proud to be associated with.
Medical
Surgeons and dentists require reliable, high-intensity light sources to do
their jobs. A company which provides the light sources these professionals
need uses fibre optic light sources which include xenon, metal halide, LED
and halogen solutions. Keeping the light source cool, for longer life, is a
constant problem. Fans are helpful, but must run very quietly, especially in
the operating room setting. To solve this problem, they use a combination
of fans and heatsinks to make their system run cooler. With the recent
introduction of custom-made AH heatsink extrusions, Ohmite was able
to offer a solution. This heatsink has a very high aspect ratio (number of
fins per inch of heatsink cross-section) and had five holes drilled to suit
customer specifications.
M Series Heatsink
EMS, Fire, Rescue and
Defence
Everyone knows that above all, the emergency services are totally
dependent on reliability from their personnel right down to the tiniest
component used in the manufacture of their vehicles and equipment. We
are proud to supply one of the world’s largest specialist distributors with
rheostats which are used in lighting controls.
Rheostat
Emergency Lighting
PC-58 Series
OHMITE
The consequences of failure in this type of equipment do not need to be
explained. That is why major European manufacturers choose to use
Ohmite PC-58 Series wirewound resistors.
Industrial Lighting
By its very nature this lighting needs to be both rugged and cost efficient.
Manufacturers across the world have specified our 40, 80, Slim-Mox, WH
and MCS resistors in order to meet the rigours of this tough environment.
MCS Series
LED Heatsinks
Ohmite S Series LED Heatsinks are low cost and easy assembly
heatsinks designed for ‘star’ power LED modules supplied by companies
such as Cree, Lumileds, Osram and others. This simple heatsink can
hold LED modules and can be mounted simply using thread forming
screws. The heatsink has two types of surface finish, black anodised or
degreased, and can be used in either natural (free) or forced convection
applications.
S Series Heatsink
Military Applications
Ohmite rheostats were first developed in 1932. They are arguably the
world’s longest surviving electronic component made to its original
specification and design and they are still being designed into new
projects. Their environmental ruggedness for withstanding high
temperatures, shock and vibration without failure make them the preferred
voltage control for military applications. We supply a tandem Model E
rheostat assembly (made up of 2 rheostats bracketed together) which
is situated in the cockpit of attack helicopters. They provide illumination
control for the cockpit LEDs and the infrared landing lights.
MacroChip
www.ttieurope.com 25
OHMITE
Surgical Lighting
We don’t need to tell you how important this application is – lives depend
on it. Our custom-designed heatsinks ensure that these headlights
provide the bright illumination and superior performance perfect for the
operating room when the surgeons require premium performance.
90 Series
FAA Ground Support
Lighting
With the built-in reliability of our 200 Series, 270 lugs, 90 Series axials, 89
Series, and Slim-mox resistors, this product does an important job, often
in the most difficult circumstances.
LED Bulkhead Lighting
Our 40 Series and 10 Series are the resistors selected for use in LED
dome lights for mobile applications where operation in rugged conditions
is often necessary.
Slim-Mox
10 Series
Lighting Control Panels
Commercial lighting control panels provide rich and cost-effective lighting
control for maximum energy savings. Ohmite’s Engineers assisted in the
selection of our LVK and TDH Series resistors for these applications.
Power Saving Emergency
Lighting
TDH Series
Emergency beacon lights have very low power consumption which can
reduce power needs by up to 96%. To aid this function Ohmite’s 20 and
89 Series resistors are used.
Electronic Ballasts
20 Series
Programmable energy saving digital ballasts are the perfect choice
for energy efficient high-intensity discharge lighting, whether metal
halide or high-pressure sodium types. Compared to magnetic ballasts
these environmentally friendly, digital programmable ballasts provide
dramatically reduced energy consumption of up to 60%. To achieve this
Ohmite’s Metalohm and 40 Series resistors are used.
Metalohm
LED Vehicle Light Bars
Constantly flashing high brightness LEDs require some serious power
control. Manufacturers choose Ohmite RW and LVK resistors to ensure
that, in an emergency, lighting would be one less thing to worry about.
Xenon Strobe Lighting
RW Series
These lamps and controllers feature the high-intensity, precisely
focused beam angle and flexible modular design needed for
numerous direct illumination applications including license plate
illumination on moving vehicles, night time surveillance and industrial
machine vision applications. Ohmite’s TAP600 resistors are selected
for this particular use.
TAP600
26 www.ttieurope.com
OHMITE
Series
Part No Prefix
Resistance (Ω)
Wattage
20
20J – 27J
0.1 – 100K
1.0 – 10.0
40
40F – 45F
0.1 – 150K
1.0 – 10.0
Metalohm
20/45M – 85/150M
0.05 – 81K
20 – 150
89
805F – 850F
0.005 – 100K
5.0 – 50.0
90
90J – 95J
0.1 – 91K
1.5 – 11.0
270
L12J – L1000J
0.1 – 392K
12.0 – 1000
10
12F – 15F
0.005 – 0.1
2.0 – 5.0
MCS
MCS1632 – MCS3264
0.005 – 0.05
1.0 – 2.0
MacroChip
MC101 – MC204
100 – 5G
0.75 – 3.25
RW1/RW2 (4Terminal)
RW1SOCK – RW2SOCK
0.005 – 25K
1.0 – 2.0
TDH
TDH35
0.1 – 5K
35
LVK (4Terminal)
LVK12 – LVK25
0.001 – 0.5
0.5 – 2
Slim Mox
SM100 – SM410
100 – 5G
1.5 – 25K
TAP600
TAP600
1-10K
600
Little Demon
0A – 0F
2.2 – 20M
2.1
R
RCL – RUS
0.5 – 50K
75 – 1000
Wirewound
Wirewound/Low Value
OHMITE
Surface Mount
Thick Film High Voltage
Thick Film Power
Composition/High Energy
Variable Voltage Controls
By now you must have realised that, at Ohmite, we’re serious about modern lighting requirements and above are just some of the products which are in
use today – there are plenty more. So if you have any problems with making it happen – we will have the solution.
www.ttieurope.com 27
OMRON
Solutions for Lighting
G5RL-HR/G5RL-LN
Features & Benefits
• Low profile: 29x12, 7x15, 7mm (LxWxH)
• Contact form SPST-NO, SPDT
• Creepage and clearance distance between coil and contacts 8mm/8mm
• Single pole 16A power relay
•A
C coil type and high inrush types available
• Low noise version available (G5RL-LN) (approx. 25% (15dB)
less sound pressure than standard G5RL)
• Conforms to UL, CSA & VDE
• Resistive load 16A at 250VAC, 24VDC (NO), 5A at 250VAC, 24VDC (NC)
• ROHS compliant
Contact Resistance
100mΩ max.
Operate Time
20ms max.
Release Time
20ms max.
Insulation Resistance
1,000MΩ min. (at 500VDC)
Dielectric Strength
6,000VAC, 50/60Hz for 1 min between coil and contacts
1,000VAC, 50/60Hz for 1 min between contacts of same polarity
Impulse Withstand Voltage
10 kV between coil and contacts (1.2×50μs)
Vibration Resistance
Destruction: 10 to 55Hz, 1.5-mm double amplitude
Malfunction: 10 to 55Hz, 1.5-mm double amplitude
Shock Resistance
Destruction:1,000m/s2 (approx. 100G)
Malfunction:100m/s2 (approx. 10G)
Life Expectancy
Mechanical: 10,000,000 operations min. (at 18,000 operations/hr)
Electrical:100,000 operations min. (at 1,800 operations/hr)
(Resistive load, 12A, 250VAC/24VDC, NO contact)
50,000 operations min. (at 1,800 operations/hr)
(Resistive load, 16A, 250VAC/24VDC, NO contact)
(Resistive load, 5A, 250VAC/24VDC, NC contact)
Ambient Temperature
Operating: –40°C to 70°C (with no icing or condensation)
Ambient Humidity
Operating: 5% to 85%
Weight
Approx. 10g
G6D-1A-ASI
Features & Benefits
• Slim and miniature: 17.5x6.5x12.5mm (LxWxH)
• Contact Form SPST-NO
• Fully sealed
• Highly efficient magnetic circuit for high sensitivity
• Conforms to UL, CSA and VDE
• Resistive Load 5A at 250VAC, 5A at 30VDC
• ROHS compliant
Contact Resistance
100mΩ max.
Operate Time
10ms max.
Release Time
5ms max.
Insulation Resistance
1,000MΩ min. (at 500VDC)
Dielectric Strength
3,000VAC, 50/60Hz for 1 min between coil and contacts
750VAC, 50/60Hz for 1 min between contacts of same polarity
Impulse Withstand Voltage
Insulation Distance
6KV 1.2x50μsec (between coil and contacts)
Creepage (Typ)
4.5mm
Clearance (Typ)
4.5mm
Tracking Resistance (CTI)
100V
Vibration Resistance
Destruction: 10 to 55 to 10Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Malfunction: 10 to 55 to 10Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock Resistance
Destruction: 1,000m/s2
Malfunction: 100m/s2
Endurance
Mechanical: 20,000,000 operations min. (at 18,000 operations/hr)
Electrical: 70,000 operations min. (5A at 250VAC/30VDC, resistive load)
300,000 operations min. (2A at 250VAC/30VDC, resistive load)
Ambient Temperature
Operating: -25°C to 70°C (with no icing)
Ambient Humidity
Operating: 5% to 85%
Weight
Approx. 3g
28 www.ttieurope.com
PANASONIC
ZNR Transient/Surge Absorbers
ZNR transient/surge absorber, Series V, Type D features large surge
current and energy handling capability for absorbing transient overvoltage
in a compact size.
Features & Benefits
• Wide varistor voltage ranges (V1mA=18V~1800V)
• Large withstanding surge current capability in compact sizes
• Large ‘Energy Handling Capability’ absorbing transient overvoltages in
compact sizes
• Wide range of varistor voltages
• The standard products shown below have received UL, CSA and VDE
standards
• Varistor voltage 82-150V: UL, VDE
• Varistor voltage 200V over: UL, CSA, VDE
• RoHS compliant
Applications
• Transistor, diode, IC, thyristor or triac semiconductor protection
• Surge protection in consumer electronic equipment
• Surge protection in communication, measuring or controller electronics
• Surge protection in electronic home appliances, gas or petroleum
appliances
• Relay or electromagnetic valve surge absorption
Related Standards
• UL1414, UL1449
• CSA C22.2 No.1 Class 2221 01
• VDE CECC42000, CECC42200, CECC42201, IEC61051
• ‘Type designation(UL)’, ‘part number(CSA)’, ‘style ref. (VDE)’ are not
registered by product part no.
Pyrolytic Highly Oriented Graphite Sheet (PGS)
B
Carrying the heat
B
Heat
Source
B
A
Heat Source
(MPUs, PAs,
graphic chips etc.)
B
• LED/lighting equipment
• Automotive lighting equipment
• Medical equipment
• Telecom and communication devices
• Battery cooling
• Temperature reduction of housing of devices
• Miniaturised and downsized devices
• Handheld and portable devices
• Optical equipment
• Semiconductor manufacturing equipment
• Embedded/PC applications
PGS
A
Applications
The two main thermal functions provided by PGS are:
1) Thermal transfer – The PGS is acting as a heat pipe transferring the
heat energy from the heat source to the heat sink, which allows a design
positioning the heat sink not directly at the heat source.
B
• Thermally conductive up to 1750W/mK
• Thin and light weight up to 17µm and 1g/cm3
• Flexible customised shapes, curved and movable layout possible
• Energy saving, no usage of electricity for heat transfer
• High reliability compared with silicon solutions
• Environmentally-friendly pure carbon (99.9%), no toxic substances,
no gas emission
• Long life stable at normal atmospheric conditions and maintenance free
• Heat resistant stable up to 400˚C
• Improves reliability reduces & spreads-out hotspot temperature from
semiconductors
• Miniaturised devices allows for a more compact circuit design
• Magnetic shielding up to 90dB
• Various PGS versions adhesive and insulated versions available
Heat Sink
Diffusing the heat
PANASONIC
Features & Benefits
2) Thermal interface – The PGS is improving the efficiency of the heat
sink and achieves a hot-spot reduction. The PGS allows to spreads out
the heat energy and improves the reliability of the semiconductor that
produces the heat.
B
Heat Sink
PGS
A
Decreasing the
thermal resistance
and diffusing the heat
PGS
Package
(Heat Source)
temSur
p fa
the era ce
pa ture
ck of
ag
e
W
it
the h P
G
tempea S
pdk
ro
ps
W
ith
ou
tP
G
S
www.ttieurope.com 29
PANASONIC
SMD Current Sensing Shunt Resistors
Current Sensing Resistors are designed for low resistance so as to
minimize power consumption. In order to meet the requirements of the
market Panasonic offers a wide range of Current Sensing Resistors in many
case sizes (0402 to 2512), many resistance values in different technologies.
Metal plate technology and special constructions makes them suitable for
the harsh environment while maintaining their high reliability. Double sided
resistor element technology (ERJxBW-series) & wide terminal technology
(ERJA, ERJB-series) for high power purpose. Furthermore Panasonic
Current Sensing Resistors correspond to AEC-Q200 and therefore are ideal
solution for even automotive applications.
Features & Benefits
• Wide range of resistance values
starting from 0.001Ω
• 0402 to 2512
• Correspond to AEC-Q200
• Large power dissipation capability
• Soft termination to reduce risk
of solder joint cracking
Pulse Proof & High Power SMD Resistors
Electronic surge can occur anywhere in
a vehicle’s electronic circuitry, industrial,
measurement and telecom applications.
Panasonic ERJP-Resistors have great AntiSurge characteristics and excellent heat
dissipation characteristics due to “Serpentine
Resistor Pattern Structure” which helps to
decrease electric field strength per unit length.
Combined with a variety of small case sizes
Panasonic Anti-Surge Resistors are suitable to
replace MELF in plenty of cases. Furthermore,
squared sized chip structure help to lead to
better solder joint reliability which is perfect for
a car’s hostile environments.
Features & Benefits
• Serpentine resistor pattern
• Decreases electric field strength
per unit length
• Dispersion of loading heat
• High power rating
• 0603 size ERJP03: 0.20W
• 0805 size ERJP06: 0.25W
• 1206 size ERJP08: 0.33W
• 1210 size ERJP14: 0.50W
• High pulse resistance
• High ESD resistance
0805 Size
(ERJP06)
1210 Size
(ERJP14)
Terminal Laser Trimming Resistor
1206 Size
(ERJP08)
SMD Power Chokes Metal Composite Molded Technology
ETQP3/4/5-Series Metal Composite Core
Technology is suitable for high current at high
switching frequency applications.
The Metal Composite Power Choke Coil
‘PCC-MC type’ combines both high frequency
and high power capability.
By unique structure and technology Panasonic
could succeed introducing the most reliable,
robust SMD Power Choke Coil with highest
power and efficiency is realised in the
SMALLEST case size to the market.
Metal Composite Power Choke Coils in
3 different case sizes (7x7mm; 8x8mm;
10x10mm) showing following unique
outstanding performance:
1) Highest performance at highest
temperature and vibration
– 150˚C temperature rating
– Up to 30G vibration
– ‘Non-hard saturation’ characteristic,
high bias current condition
– Non temperature impact on DC
bias characteristic
– Heat shock H/C 2000 cycles
(-40˚C to 150˚C)
2) Outstanding power efficiency
– Minimised power loss at high
frequency (>100kHz)
– Minus 50% AC resistance above
300kHz compared to ferrite type
3) Highest power in smallest SMD case size.
Film Capacitors for Noise Suppression for LED Lighting
Panasonic is introducing the ECQUA Series,
a new X2 Safety Capacitor in compact and high
reliability design. The series offers a guaranteed
moisture resistance of 85˚C, 85%, 500h under
loaded conditions. The ECQUA Series is
produced with polypropylene film and has
a patterned metallisation technology
(100% Panasonic black box technology).
Panasonic is using pure Aluminium for the
metallisation of the foil together with our
patterned structure this provides stable
capacitance over the lifetime of the capacitor
and the customer design/application. ECQUA
is accredited in accordance with UL/CSA and
European safety regulation class X2.
30 www.ttieurope.com
Features & Benefits
• Rated voltage 275VAC/310VAC*
• Capacitance range 0.1 to 1uF
(1.5uF and 2.2uF under development)
• Temperature range -40˚C to +110˚C
Applications
• Lighting applications
• Interference suppressors
• Power supplies
• Solar applications
• Metering applications
• Home appliance
*(310VAC = maximum AC Voltage not nominal continuously applied voltage)
PANASONIC
A-FR Series – New Low ESR Capacitor
Panasonic is introducing the FR-Series, new
Aluminium Electrolytic Capacitor in radial
construction. This capacitor is the perfect
solution for applications, which require ultra low
ESR – very high ripple current – very long life
in a small mounting form.
In comparison to our current products e.g.
FM series, we could achieve a lifetime upgrade
of up to 100% (up to 10000h at 105˚C) and a
capacitance increase of up to 30% by improving
the material technology. The Radial FR series is
in mass production and samples are available.
Features & Benefits
• Voltage range 6.3 – 63V
• Capacitance range 22 – 8200uF
• Lifetime 5000 to 10000h
• Ripple current up to 3820mA
• ESR down to 12mΩ (20˚C/100kHz)
• Size Ø5x11mm to Ø16x25mm
Applications
• LED applications
• Switching mode power supply
• Switching mode adapter
• Line noise removal
• LCD backlight
• Applications with long lifetime requirements
Slimfit Capacitor – New A-HD PEN Cap Series
The new Panasonic PEN Cap product line (Aluminium Electrolytic THT
Capacitors) convinces with high ripple current values and a long life in
small diameters – perfectly fitting to the market needs requiring small and
thin components.
With their slim and long construction and the high performance PEN Caps
are ideally matching for multiple applications in all industrial areas e.g.
lighting and home appliance.
Features & Benefits
Applications
• LED lighting
• Ballast
• Switching mode power supplies
• All slim-design application e.g. LCD TV, power supplies
Technical Data
• Capacitance range 33uF to 47uF
(up to 110uF under development)
• Voltage range 400V to 450V
• Temperature range -25˚C to +105˚C
• Endurance 5000h/10000h at 105˚C
• Size Ø10mm, length 40 to 50mm (Ø12.5mm under development)
Power Film Capacitor – ECWF(A) Series Upgrade to 630VDC
To fulfil an excellent feature of your designs, such as power supplies and
lighting devices, the performance and characteristics of the used Film
Capacitors is one key for the success.
Panasonic developed with the new metallised Polypropylene Film
Capacitor ECWF(A) 630V type a product outstanding in downsizing, low
profile and high safety standards. An advanced patterned metallisation
technology allows current to flow past a failed point bypassing failed
cells and therefore increasing capacitor safety and miniaturisation of the
components.
The newly ECWF(A) 630VDC type contributes to the market requirements
of downsizing of DC cut and active filter in inverter lighting circuits.
Features & Benefits
• High safety – patterned metallisation technology
• High reliability and moisture resistance –
85˚C/85% RH/500VDC/500h
• High pulse current – up to 143A0-P
• Low Hum sound and excellent frequency characteristics
• Small in size and low in profile
• IEC 60065 Flammability requirement
Technical Data
• Capacitance range 0.1uF to 2.2uF (630VDC)
• Rated voltage 250VDC to 630VDC
• Temperature range -40˚C to +105˚C
PFC Circuit
X Capacitor
Class X2
Y Capacitor
Class Y3
PFC Cap
(Active Filter
Capacitor)
Resonance type converter
Resonance Snubber
Capacitor
PANASONIC
• High ripple current – up to 540mA (up to 750mA under development)
• Miniaturisation – Ø10mm for slim designs
• High reliability – 10000h lifetime at 105˚C
Smoothing
Typical circuit diagram for LED lighting
Applications
• LED Lighting
• High frequency and high current circuits
• SMPS – switching mode power supply
• Power factor correction
• General power applications – AC to DC filtering
• Home appliance
• General industry
www.ttieurope.com 31
PHOENIX CONTACT
SMD-Connectors for LED applications
Phoenix Contact created a generation of small connectors that help lighting manufacturers to simplify the wiring of LED modules. The PTSM Series
connectors are easy to integrate into existing SMT processes and feature fast, reliable connection technology.
When it comes to solid state lighting, more and more manufacturers use high-power LED boards for modular designs. A popular solution for these
applications is to mount the high-power LEDs on a metalcore printed circuit board (MCPCB). The metal layer in these boards provides an excellent
means to disperse heat from the LEDs but also has an adverse effect: Conventional through-hole connectors which ensure fast and easy wiring of the
board cannot be used anymore.
Suitable push-in connectors for LED boards in surface-mount technology are still hard to find on the market. Therefore, it is common practice that the
connection wires are often soldered to the MCPCB in an additional, sometimes even manual, process. Soldering to metal core boards is an energyand time- consuming procedure that increases unit costs. Pressure of costs, quality issues and the unpleasant appearance of the connection drive
manufacturers to look for better connectors for their LED boards.
PTSM Connector
PTSM/PTPM Plug & SMT Header Systems
Smaller, More Compact, Faster to Connect
The PTSM connector measures only 5mm in height and offers a wide
range of beneficial features. Its housing is made from LCP (Liquid Crystal
Polymer) to withstand the heat during the reflow process. Rugged SMD
style anchors enable multiple wire termination and disengagement cycles.
The connector is approved for stranded and solid wires and allows for
cross sections up to 0.75mm2. Operation of the spring connector is
comfortable and simple – a small screwdriver is the only tool needed for
wire insertion/extraction.
The PTSM spring cage plug connector with a 2.5mm pitch can conduct
6A at a voltage of 160V. Flexible and rigid wires can be connected with
a cross section of between 0.14mm2 and 0.75mm2. The pierce contact
PTPM plug connector also with a 2.5mm pitch conducts 4A at a voltage
up to 160 V. The connector can clamp flexible conductors from AWG 26 to
AWG 22. A range of only 5mm high THR and SMD headers are available
for these plug connectors. The LCP (Liquid Crystal Polymer) enclosures
ensure that these headers can be easy handled in SMT processes.
Daisy chaining of LED modules is a popular method of arranging LED
boards. This in turn means the supply current is getting higher with the
number of modules connected together. Featuring a current rating of 6A,
this small connector is more than sufficient for most applications using
daisy chaining. Available in horizontal and vertical versions, the PTSM
connector supports various design approaches.
These miniature plug connectors are especially suitable for connecting the
power/data supply to LED boards which are used in lighting applications.
In addition, hardware developers can choose between two mounting
technologies: SMT for MCPCBs and pin-in-paste for ordinary PCBs.
All products are wrapped in tape on reel.
Plug connectors
PTPM
PTSM
Conductor cross-section
0.2mm
0.4mm
No. of pos.
Order No.
Order No.
2
1780477
1780529
4
1780480
1780532
6
1780493
1780545
8
1780503
Order No.
2
1778832
3
1778845
4
1778858
5
1778861
6
1778874
7
1778887
8
1778890
for SMD applications
32 www.ttieurope.com
No. of pos.
2
3
4
5
6
7
8
No. of pos.
2
3
4
5
6
7
8
Horizontal
Order No.
1701092
1701093
1701095
1701096
1701097
1701098
1701099
Order No.
1701075
1701076
1701077
1701079
1701080
1701082
1701083
• Current rating: up to 6A
• Voltage rating: 160V
• Wire range: from 0.14mm2 up to 0.75mm2
• Metal parts: Cu alloy
• Plating: tin plated
• Insulator material: LCP (for header)
Header for PTPM and PTSM plug connectors
(Packed to 5, complete tape on reel packages available online)
for THR applications
1780558
No. of pos.
for SMD applications
Print terminal blocks PTSM
(Packed to 5, complete tape on reel packages available online)
for THR applications
Features & Benefits
Vertical
Order No.
1701100
1701101
1701102
1701103
1701105
1701106
1701107
Order No.
1701084
1701085
1701086
1701087
1701088
1701089
1701091
No. of pos.
2
3
4
5
6
7
8
No. of pos.
2
3
4
5
6
7
8
Horizontal
Order No.
1785977
1785980
1785993
1786002
1786015
1786028
1786031
Order No.
1786044
1786057
1786060
1786073
1786086
1786099
1786109
Vertical
Order No.
1785906
1785919
1785922
1785935
1785948
1785951
1785964
Order No.
PHOENIX CONTACT
PTQ Terminal Block with IDC Fast Connection
The PTQ mini PCB terminal block with an overall height of only 8mm and
its small pitch of 2.5mm is developed for thru-hole soldering processes.
Unprepared wires are easy to feed into the terminal block. There is no
need to strip the wires because insulation displacement contacts are
closed by pushing down the actuation lever. Releasing the wires takes
place by simply opening the actuation lever.
No tools are needed for operating this terminal block. This makes it
ideal for field wiring of various lighting applications.
1702610 PTQ 0.3/ 2-2.5 THR R32
1799099 SAMPLE PTQ 0.3/ 2-2.5 THR R32
Features & Benefits
• Current rating: up to 4A
• Voltage rating: up to 160V
• Wire range: 0.14-0.34mm2 (suitable for stranded and solid wires)
• Metal parts: Cu alloy
• Plating: tin plated
• Insulator material: LCP
PTSA Angled Print Terminal Block
This terminal Block with fast spring connection is ideal for LED driver
and ballasts where wires need to be connected in an angle to the board.
Available in 2 to 24 positions and 2.5mm or 3.5mm pin spacing, these
terminal blocks are suitable for rigid and flexible wires up to 0.5mm2 or
1.5mm2, respectively.
Bare, rigid wires are simply inserted into the termination points without
the aid of tools.
Only when loosening a wire from its terminal a standard screwdriver is
needed to press the lever. Voltage tests can be performed with a test
probe when a wire is connected.
1985195 PTSA 1.5/ 2-3.5-Z (with staggered solder pins)
1985218 PTSA 1.5/ 4-3.5-Z (with staggered solder pins)
1984963 PTSA 1.5/ 2-3.5-F (front solder pins)
1984989 PTSA 1.5/ 4-3.5-F (front solder pins)
• Current rating: 2A
• Voltage rating up to: 400V
• Wire range: 0.14-1.5mm2 (suitable for stranded and solid wires)
• Metal parts: Cu alloy
• Plating: tin plated
• Insulator material: PA
PTS 1.5 Horizontal Print Terminal Block
Terminal Block with fast spring connection is ideal for LED driver and
ballasts where wires need to be connected in parallel to the board.
The large clamping area accepts wire sizes up to 2,5mm2- the pitch is
5,0mm. Rigid wires are simply inserted into the termination points without
the aid of tools. When loosening a wire- just a standard screwdriver is
needed to press the lever. Its short footprint of only 10.5mm leaves room
for additional functions on the board.
PHOENIX CONTACT
Features & Benefits
1792863 PTS 1.5/ 2-5.0-H
1792889 PTS 1.5/ 4-5.0-H
1703083 PTS 1.5/ 2-7.5-H
1703086 PTS 1.5/ 4-7.5-H
Features & Benefits
• Current rating: 16A
• Voltage rating: 400V
• Wire range: 0.2-2.5mm2 (suitable for stranded and solid wires)
• Metal parts: Cu alloy
• Plating: tin plated
• Insulator material: PA
www.ttieurope.com 33
SOURIAU
UTL Series
The UTL Series is a sealed plastic connector range able to carry up to 16A 500V.
Features & Benefits
• Key shape coupling with latching retention system
• Secure against unwanted tampering, designed to be overmoulded
• Suitable for outdoor use, UV resistant, F1 material + IP68
• Can be use in public environment, fire and smoke: UL94 5VA
• Easy qualification of system by regulation authorities, compliant with luminaries standard UL 1598, IEC 60598
Technical Features
Mechanical
• Durability: 1000 cycles (with stamped and formed contacts and
S18 plating)
• Vibration resistance: Sinusoidal vibrations per IEC 60512-4 from
10 to 2000Hz
• Body connector + Backshell: Thermoplastic
Environmental
• Operating temperature: from -40˚C to +105˚C
• Flammability rating: UL 94 5VA
• Salt spray: ≥ 1000hours
• UV resistance: F1 material per the UL 746C
• Sealing
– IP68/69K – IP6X mated and unmated
– IPX8: mated (10m underwater during 1 week)
– IPX8: unmated with sealed contact (1m underwater during 1 week)
• Insert: Thermoplastic
• Nut: Metal
Electrical
• Working voltage: 500V per UL 1977 277/480VAC per UL 1977
• Rated current 16A
• Connector for breaking circuit
Contact type
Part number
Connector type
Crimp contacts supply separately
Male insert
Female insert
Plug
UTL6103G1P
UTL6103G1S
Square flange receptacle
UTL0103G1P
UTL0103G1S
Jam nut receptacle
UTL7103G1P
UTL7103G1S
Inline receptacle
UTL1103G1P
UTL1103G1S
Accessories
Contacts
Part number
Description
Part number
Description
SC16M11S18
Female stamped and formed contact for AWG 16 wire
UTL10DCG
Receptacle dustcap
SM16M11S18
Male stamped and formed contact for AWG 16 wire
UTL110BOOT
Inline receptacle boot
SC14M11S18
Female stamped and formed contact for AWG 16 wire
UTL610BOOT
Plug boot
SM14M11S18
Male stamped and formed contact for AWG 16 wire
RM16M25K
Male sealed contact for AWG 16 wire
RC16M25K
Female sealed contact for AWG 16 wire
RM14M25K
Male sealed contact for AWG 14 wire
RC14M25K
Female sealed contact for AWG 14 wire
34 www.ttieurope.com
TT ELECTRONICS
OVQ12S30x7 Flex Module
The OVQ12S30x7 LED Light Strip is a flexible
and scalable lighting solution using high
brightness LEDs to supply illumination for
residential, commercial, and industrial
applications. Up to 16 feet (5 meters) can be
operated with a single 12V power supply.
Dual-sided tape provides easy installation in
most indoor applications and allows many
different configurations.
Features & Benefits
• Versatile Flex Strip of 30 LEDs
• Fast response time
• Low power requirements
• UL FILE E339817
Applications
• Commercial and residential decoration
• Under-counter lighting
• Media illumination
• Large area backlighting
• Small to medium channel letters
• Point-of-sale displays
• Neon replacement
OVSPW1BCR4 1-Watt SMD 6mm
The OVSPxBCR4 Series is an energy-efficient
packaged LED source that offers high
luminance, and a long operating lifespan.
These devices offer a 120° viewing angle and
an ultra-low profile (1.5mm) making them
highly suitable for conventional lighting and
specialised applications. Optional optics are
offered to suit application.
Features & Benefits
• Robust energy-efficient design with long
operating life
• Low thermal resistance
• High luminous intensity
• Optional optics to suit application
OVS5MWBCR4and OVS5MWWBCR4
Mini Half-Watt SMD 3.5mm
The mini-half watt is an energy-efficient
packaged LED source that offers high
luminance, and a long operating lifespan.
This device offers a 120° viewing angle and
an ultra-low profile (1.2mm) making it highly
suitable for conventional lighting and
specialised applications.
Features & Benefits
•C
ompact package outline of 3.5x3.5x1.2mm
•R
obust energy-efficient design with long
operating life
•L
ow thermal resistance
•E
xceptional spatial uniformity
•C
ompatible to IR reflow soldering
•H
igh lumens output
Applications
•A
utomotive exterior and interior lighting
•A
rchitectural indoor and outdoor lighting
•G
eneral lighting
•D
isplay backlighting
•E
lectronic signs and signals
OV4ZRGBA Full Color RGB
Features & Benefits
•D
esigned with 4 1-watt chips in recessed cavity
with an optical grade 5mm diameter lens
•E
xceptional thermal resistance
(<2°C/W junction to heatsink)
• Soldering points or pins provided for electrical
connections
• Locating slots for M3 screws
Applications
•S
ignage
•B
acklighting – architectural
Applications
• Automotive exterior and interior lighting
• Architectural indoor and outdoor lighting
• General lighting
• Electronic signs and signals
VRW25/37/68 – High Voltage Thick Film Axial Resistors
HVC High Voltage Chip Resistor
Features & Benefits
Features & Benefits
Application
Applications
• High continuous voltage rating
• Surge withstanding
• Flameproof and EN60065 safety approved
• Output stage of electronic lighting ballast
ULW Wirewound Mains Input Resistor
• Small footprint
• Up to 3kV on 2512 chip
• Robust surge performance
• Fluorescent tube inverters
LRF3W High Power Current Sense Chip Resistor
Features & Benefits
Features & Benefits
Application
Applications
• Surge withstanding wirewound design
• UL1412 recognised for safe mains fusing
• UL94-V0 flameproof cement coating
• Mains input stage of electronic lighting ballast
TT ELECTRONICS
Fixed Resistors
• Low values to R003
• 3W in 2512 chip
• Inverse terminations to help cool running
• Current sense in LED drive circuit
www.ttieurope.com 35
TDK-EPC
EPCOS and TDK components for LED lighting
A wide spectrum of EPCOS and TDK components are available for existing and new LED applications, ranging from
low-power indoor lighting solutions all the way to high-power 100W LED streetlights.
Series
Brand
Technical Data
Features
Ordering Code/Type
VR: 450 to 1300VDC
CR: 1.5 to 110µF
Operating temperature up to +105°C
Useful life of 100,000h at 1.0 x VR and +70°C
High vibration resistance due to 4-pin terminals
2- and 4-pin versions
Lead spacing from 27.7 to 52.5mm
B32774 …
B32776 …
B32778 …
VR: 63 to 630VDC
VRMS: 40 to 400VAC
CR: 0.001 to 220µF
Low-voltage DC-link applications
Operating temperature up to +125°C
Useful life of 200,000 h at 1.0 x VR and +70°C
B32520 B32529
MKP PFC
VR: 450 … 630VDC
CR: 0.010 … 2.2μF
Operating temperature up to +125°C
Specially designed for PFC stage
Lead spacing 10 … 22.5mm
B32671Z
B32673Z
B3261XP4
X1
VRMS: 300VAC
CR: 0.01 to 6.8µF
X1 class (4000V) for interference suppression and EMC
Approved to international standards
Across-the-line connection
Lead spacing from 10 to 37.5mm
B32911 …
B32912 …
B32913 …
B32914 …
B32916 …
X2
VRMS: 305VAC
CR: 10nF … 45μF
X2 class (2500V) for interference suppression and EMC
Approved acc. to international standards
Lead spacing 10 … 52.5mm
B32921 … B32928
Y2
VRMS: 300VAC
CR: 1nF … 1μF
Y2 (8000V) class for interference suppression and EMC
Approved acc. to international standards
Line to ground connection
Lead spacing 10 … 37.5mm
B32021 … B32026
SIMID
0603 … 2220
SMD
LR: 1nH … 10mH
IR: up to 3.5A
Laser-welded, molded
High current capability
B82422
B82432
B82442
B82496C …
B82498F …
Ring core chokes,
double
LR: 0.19 … 100mH
IR: 0.25 … 62A
VR: 250 … 300VAC
250 …1000VDC
(DC link)
High resonance frequency owing to special winding
technique
Approximately 1% stray inductance for symmetrical
interference suppression
Plastic case with terminals
Higher current chokes on baseplate, winding wire serves
as solder terminal
B8272 …
B82791H2 …
B82791G2 …
Framecore chokes (FC)
LR: 10 … 100mH
IR: 0.45 … 2.3A
Closed magnetic circuit with frame construction
4-section winding
Approximately 2% stray inductance, excellent differential
mode suppression
High pulse-handling capability
Low height allows usage in lamp ballasts
Optional: magnetic bypass to increase stray inductance
B82732F …
B82733F …
Leaded RF chokes
LR: 0.1µH … 100mH
IR: up to 2.5A
High current capability
Low DC resistance
Very good saturation characteristics
Axial and radial leaded versions
B781 …
B8214 …
Power inductors
LR: 0.82 … 1000µH
IR: up to 11A
Shielded and unshielded versions
Low profile versions down to 1mm height
High current capability
Low DC resistance
B8246 …
B8247 …
LR: 1.2 … 1500µH
IR: 130 … 8200mA
Case sizes: 6025 … 12575
Low profile, low DC resistance, and high current
capabilities
Suitable for high-density mounting configurations
Flat bottom surface ensures secure, reliable mounting
SLF Series
Film Capacitors (Medium Power)
MKP DC link
Inductors
36 www.ttieurope.com
TDK-EPC
Series
Brand
Technical Data
Features
Ordering Code/Type
V2
V3
V4
SMD
Temperature range: –55 … +125°C
(+150°C upon request)
Rated resistance at 25°C: 47Ω … 470kΩ
Resistance tolerance: ±3, ±5%; ±1%
Case sizes: 0402/0603/0805
B572**V …
Wide range of resistances and tolerances
B573**V …
Multilayer SMD NTC with inner electrodes
Very good aging stability in high-temperature environment B574**V …
Very good resistance stability during soldering (change <1%)
S86
S87
S88
S964
K1150
K220
Temperature range: –55 … +155°C
Nonstandard lead configurations
Rated resistance at 25°C: 2 … 100kΩ Taped versions for automatic processing
Resistance tolerance: ±1 … ±5%
Lead spacing 2.5 and 5.0mm (S87, S88)
UL approval (S86)
B5786*S …
B5787*S …
B5788*S …
B57962S …
Limit temperature
sensor, chip
A641
SMD
Sensing temperature: 75 … 145°C in EIA 0603
Lead-free tinned terminations
steps of 10°C
RR: 470Ω
Tolerances: ±5°C
B59641A …
Temperature sensor
probe
D901
Sensing temperature: 60 … 130°C in Sensor with epoxy resin coating
steps of 10°C
Metal tag for easy mounting
RR: ≤100Ω
Good thermal contact
Short response time
B59901D …
MLV, CeraDiodes
0402 … 2220
SMD
Operating voltage VRMS: 4 … 60V
Surge current up to 1200A
Operating temperature up to +125°C
Bidirectional clamping
Stable protection level
Minimum leakage current
B72500
B72510
B72520
B72530
S05
S07
S10
S14
S20
Imax 8/20μs: up to 800A
Imax 8/20μs: up to 1750A
Imax 8/20μs: up to 3.5kA
Imax 8/20μs: up to 6kA
Imax 8/20μs: up to 12kA
Operating voltage VRMS: 11 … 1100V
High surge current ratings up to 12kA
High energy ratings (2ms) up to 440J
For high energy absorption
B72205S …
B72207S …
B72210S …
B72214S …
B72220S …
Multilayer ceramic
capacitors (mid-voltage)
Temp. characteristic: CH, C0G, B,
X7R, X5R
VR: 100 … 630V
Case sizes: 1005 … 5750
Unique design structure for mid-voltage enables a
compact size with ability to withstand high voltages
C Series
Leaded ceramic
capacitors (mid-voltage,
safety certified)
CD Series:
Temp. characteristic: B, E
VR: 250, 400V
C: 100pF … 4.7nF
CS Series:
Temp. characteristic: B, E, F
VR: 250, 400V
C: 100pF … 10nF
Compliant with safety standards
CD/CS Series
Flame-resistant, reinforced outer insulation prevents fires,
electrical shock, and other potential hazards
NTC Thermistors
PTC Thermistors
Varistors
TDK-EPC
Ceramic Capacitors
www.ttieurope.com 37
TE CONNECTIVITY
CoolSplice Connectors
Features & Benefits
• 230VAC Max. Current 2.5A Max.
• <50Vrms AC <120VDC Current 5A Max.
• No special tooling required
• Optional IP65 & 67 sealing
• Sealed and unsealed parts available
Applications
• Commercial refrigerators
• Display cabinets
• Outdoor lighting
• Industrial applications
• Lighting controls
• General installations with 0.75mm 2 (18AWG & 20-22AWG) wire-to-wire
Part Numbers
Unsealed, green
18AWG
293545-1
Sealed, blue
18AWG
293545-2
Unsealed, green
20-22AWG
293545-3
Sealed, blue
20-22AWG
293545-4
Miniature Hermaphroditic Connectors Board-to-Board
Features & Benefits
• Voltage rating 300VAC/DC, Current rating 3A Max.
• Connector mates with itself
• Available in 2, 4 and 6 position
• Pitch 3.00mm
• Connector height 2.30mm; Mated length (2 connectors) 11.00mm
Applications
• Cabinet lighting
• Furniture lighting
• Advertisement lighting
• Refrigerator lighting
• LED strip lighting
Part Numbers
2 position
1971567-1
4 position
1971567-2
6 position
1971567-3
SMT and Thru-Hole Poke-In Wire Lighting Connectors
Features & Benefits
• Voltage rating 250VAC/DC, Current rating 5A Max.
• 1 and 2 position SMT and Thru-hole versions; black and white colours
• Sub 4.00mm height with rounded edges minimises shadowing
• Accepts 18 & 20AWG pre-bond stranded, 18AWG stranded wire
• Accepts 18-22AWG solid wire
• Tape & reel packaging for high speed processing
Applications
• Channel signage
• LED string lighting
• LED fixtures
• Architectural lighting
• Shelf/cabinet lighting
• Refrigeration lighting
• Display lighting
Part Numbers
1 position, white
2008563-1
1 position, black
2008563-2
2 position, white
1954097-1
2 position, black
1-1954097-1
38 www.ttieurope.com
TE CONNECTIVITY
Hermaphroditic Blade & Receptacle Connectors
Board-to-Board
Features & Benefits
• 125VAC/DC, Current rating 6A Max.
• Connector mates with itself 2, 4 and 6 position, black and white colours
• Connector mates vertically & horizontally; articulates through 90 to 180
degrees
• Low profile with rounded edges to minimise shadowing
Applications
• Channel signage
• LED string lighting
• Lighting controls
Part Numbers
2 position, white
1954289-1
2 position, black
1-1954289-1
4 position, white
1954289-2
4 position, black
1-1954289-2
6 position, white
1954289-3
6 position, black
1-1954289-3
IDC SSL Connector
Features & Benefits
• 400VAC/400VDC, Current 8A Max. (18AWG only)
• Available in 1, 2, 3 & 4 position
• 18 to 24AWG stranded & solid wire
• Wire gauge colour coded
• Tool-less termination
Applications
• LED lighting controls
• General illumination LED fixtures
• LED string lighting
• Non-lighting wire-to-board applications
Part Numbers
Closed End Connector (SMT)
Feed Through Connector (SMT)
1 position
X-2106003-1
X-2106431-1
2 position
X-2106003-2
X-2106431-2
3 position
X-2106003-3
X-2106431-3
4 position
X-2106003-4
X-2106431-4
SlimSeal SSL Connector
Features & Benefits
• 400VAC/DC, Current 5A (18-20AWG) 3.5A (22-24AWG)
• Available in 2, 3 and 4 position
• IP67 sealing, UV resistant material
• Positive latching, polarised connectors
• Wire-to-board and wire-to-wire versions
• Architectural lighting
• Flood lighting
• Spot lighting
• Tunnel lighting
Part Numbers
Right Angle SMT
Header Assembly
Plug Cable Assembly
Receptacle Cable
Assembly
2 position
2106056-2
2106378-2
2106391-2
3 position
2106056-5
2106378-3
2106391-3
4 position
2106056-8
2106378-4
2106391-4
TE CONNECTIVITY
Applications
www.ttieurope.com 39
TE CONNECTIVITY
Inverted SMT Thru-Board Connector
Features & Benefits
• 70VAC/70VDC, Current 3A (24AWG), 2.5A (26AWG), 1.5A (28AWG)
• Available in 2 to 6 position
• Brings power to LED from underside of PCB
• Low profile design
• Mates with standard ‘Mini-CT’ product
Applications
• LED lighting controls
• Indoor & outdoor lighting fixtures
• LED luminaires
• Non-lighting applications that require wire dress connections
below the PCB
Part Numbers
Connector
Cable Assembly
2 position
2106091-1
2058943-1
3 position
2106091-2
2058943-2
4 position
2106091-3
2058943-3
5 position
2106091-4
2058943-4
6 position
2106091-5
2058943-5
LIGHT-N-LOK Connector
Features & Benefits
• 600VAC, Current 5A Max.
• Available in 2 & 3 position
• Poke-in termination for 18AWG solid wire; tool-less
• Supplied with integral contacts
• Mated pair is one single part number
Applications
• Commercial lighting
• Any wire-to-wire connection application
• Hot pluggable disconnect for fluorescent lighting fixtures in
commercial buildings
Part Numbers
2 position, mated pair
2008144-1
3 position, mated pair
2008152-1
Solderless LED Socket, Type NL2
Features & Benefits
• Solderless termination to Nichia COB-L series LED
• Poke-in wire terminals
• LED retained in housing with slight press-fit (LED not included)
• UV resistant housing material
• Two screw attachment using M3 or #4 screws
• Integrated features for polarization on heat sink
Applications
• Retail lighting
• Commercial down lights
• High bay lighting
Part Number
Solderless LED Socket, Type NL2
40 www.ttieurope.com
2174024-1
TE CONNECTIVITY
TE Solderless LED Socket, Type LS
Features & Benefits
• Solderless termination to LUXEON S LED
• Integral optics attachment features
• LED locator to aid assembly
• Three screw attachment using M3 or #4 screws
• No-strip IDC termination of 24 AWG solid & stranded wires
• Integral thermal spring frame helps provide adequate normal force for
LED to heat sink
• Low profile – housing optical interference <2% of total LED light output
Applications
• Custom single source spot lighting fixtures
• Lighting fixtures requiring multiple distributed, high intensity sources
• Integrated retrofit spot lights (PAR30, PAR38, MR-16)
Part Numbers
Solderless LED Socket, Type LS without optics latches
2154235-1
Solderless LED Socket, Type LS with optics latches
2154235-2
Solderless LED Socket, Type LS punch tool
2154473-1
Solderless LED Socket, Type LS snap-on reflector
1-2154430-1
Solderless LED Socket, Type CM
Features & Benefits
• Solderless termination to the Cree XLamp MP-L LED
• Fast, rapid termination and assembly – eliminates hand soldering wires to
the MPL 0.70mm x 0.85mm pads
• Offered in separable board termination and wire termination versions
• Snap-on optics assembly using LEDIL’s Tyra series reflector optics
• Custom parallel and serial AMPMini CT cable assembly lengths are
available upon request
Applications
• Commercial and residential lighting fixtures
• Integrated custom lighting
Part Numbers
Description
Parallel
Serial
LED to wire without optics latch
2106946-1
2106947-1
LED to wire with optics latch
2106946-2
2106947-2
LED to board without optics latch
2106946-3
2106947-3
LED to board with optics latch
2106946-4
2106947-4
LED to inverted wire, without optics latch
2106946-5
2106947-5
LED to inverted wire, with optics latch
2406946-6
2106947-6
AMP Mini CT 2 conductor cable assembly
AMP Mini CT 6 conductor cable assembly
2154000-1
2058943-5
Metal Oxide Varistors (MOVs) are typically used for transient overvoltage
suppression in AC line voltage applications. Lightning, inductive load
switching, or capacitor bank switching may cause transient overvoltage
conditions. In these applications, there also exists the potential for a
sustained abnormal overvoltage/limited current condition that may cause
the MOV to go into thermal runaway, resulting in overheating, outgassing
and possibly fire. New thermally enhanced MOVs help protect a wide
variety of low-power systems against damage caused by overcurrent,
overtemperature and overvoltage faults, including lightning strikes,
electrostatic discharge (ESD) surges, loss of neutral, incorrect input
voltage and power induction.
TE CONNECTIVITY
AC Mains LED Lighting Protection
CoolSplice, LIGHT-N-LOK, SlimSeal, TE Connectivity and TE connectivity (logo) are trademarks.
Cree and XLamp are registrations and MP-L is a trademark of Cree, Inc.
LUXEON is a registered trademark of Philips Lumileds Lighting Company US, LLC.
Nichia is a trademark of Nichia Corporation.
www.ttieurope.com 41
VISHAY
Aluminium Capacitors
159 PUL-SI Ultra Long Life, Snap-In Aluminium Capacitors Series
Features & Benefits
• Polarised aluminium electrolytic capacitors, non-solid electrolyte
• Large types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve
• Low ESR, high ripple current capability
• Useful life: 5000h at 105°C
• Keyed polarity snap-in version available
Applications
• DC-link capacitor in inverter for street lighting
• General purpose, industrial and audio/video systems
• Smoothing and filtering
• Standard and switched mode power supplies
• Energy storage in pulse systems
146 RTI Radial Aluminium Capacitors Series
Features & Benefits
• Polarised aluminium electrolytic capacitors, non-solid electrolyte
• Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue PET sleeve
• Charge and discharge proof
• Very long life: 2500h to 6000h at 125°C, high stability, high reliability
• Very low ESR
• Excellent ripple current capability
Applications
• Power supplies (SMPS, DC/DC converters) for industrial, automotive,
telecommunications and military
• Smoothing, filtering and buffering
146 CTI SMD Aluminium Capacitors
Features & Benefits
• Polarised aluminium electrolytic capacitors, non-solid electrolyte, self healing
• Soldering heat resistant according to IPC/JEDEC J-STD-020
• Low impedance down to 0.035Ω at 20°C, 100kHz
• High ripple current: up to 1.75A at 125°C, 100kHz
• Long useful life: up to 6000h at 125°C
• Charge and discharge proof, no peak current limitation
• Vibration proof, 4-pin version and 6-pin version
Applications
• SMD technology, for high temperature reflow soldering
• Industrial and professional applications
• Automotive, general industrial, telecom
• Smoothing, filtering, buffering
Inductors
IHLP® SMD Power Inductors Series
Features & Benefits
• 9 footprints and 12 height profiles available
• Shielded construction
• Standard inductance values to 100µH
• Frequency range to 5MHz
Applications
• DC/DC Converters (boost or buck) for LED driver circuits
• High current noise filtering
• High temperature (155°C operation)
Film Capacitors
MKP1848S Series, Slim film Capacitors for Mid-Power Electronics
Features & Benefits
• Lifetime 100000 hours at UNDC and 70°C
• No internal electrolyte, no storage problems, long lifetime
• 500V, 700V and 900V availability
• Slim design: 12/15/18/24mm height
• Operating temperature up to 105°C
Applications
• DC-link capacitor for low profile LED street lighting
42 www.ttieurope.com
VISHAY
Draloric Beyschlag Resistors
TFU Series
Features & Benefits
• Very quick acting fusing characteristics
• Standard SMD size, chip size 0603
• Rated currents 1.5A up to 4.0A
• Lead (Pb)-free solder contacts
• Halogen-free according to IEC 61249-2-21 definition
• UL recognition approval according to UL 248-14
Applications
• Information technology
• Telecommunication
• Audio/video electronics
MFU Series
Features & Benefits
• Advanced thin film technology
• Very quick acting fusing characteristics
• Narrow spread of fusing characteristics
• Green product, supports lead (Pb)-free soldering
• Standard chip sizes 0402 up to 1206
• Rated currents 0.5A up to 6.3A
• Halogen-free according to IEC 61249-2-21 definition
• UL recognition approval according to UL 248-14
Applications
• Information technology
• Industrial electronics
• Automotive electronics
• Telecommunication
• Medical equipment
• Audio/video electronics
MELF Series
Features & Benefits
• Superior pulse handling capability up to 3kV or 1kW for 0207
• Excellent long term stability down to class 0.05
• Operating voltage up to 350V
• Resistance range from 0.1W up to 15MW
Applications
• Lighting ballast
• Power supplies
• Control units
MC Series
Features & Benefits
• High pulse stability up to 10W or 300V for 0805
• Power operation mode up to 155°C film temperature
• Very high long term stability down to class 0.1
• Resistance range for precision resistors available up to 2MW
Applications
• Lighting ballast
• Power supplies
• Control units
VR25 and Z300
Pulse Proof Thick Film Chip Resistor – D/CRCW-IF e3
Features & Benefits
Applications
• High and repetitive pulse loading
• HID headlight/AFL charge and discharge
• Lighting supplies
• Medical equipment
VISHAY
• High pulse performance
• Tolerance 5%, 10%
• RoHS compliant
• AEC-Q200 qualified
www.ttieurope.com 43
VISHAY
Power MiniLEDs
The VLMx223 is a new series of super red, red, amber, soft orange, and
yellow power MiniLEDs in ultra-compact, surface mount package. 3x higher
intensity than standard AlInGaP LEDs.
Features & Benefits
• 2.3mm by 1.3mm by 1.4mm
• AEC-Q101 qualified
• High intensity up to 1400mcd
• High drive currents up to 50mA
• ± 60° angle of half-intensity
Applications
• Automotive : Interior and exterior lighting
• Traffic signals and signs
• Indicators
• Backlighting
Ambient Light Sensors
Features & Benefits
Visible
• Surface mount package and leaded package available
• AEC-Q101 qualification available
• High photo sensitivity
• Adapted to human eye responsivity
• Supression filter for near infrared radiation available
• Angle of half sensitivity: ϕ = ±20° to ± 60°
• Lead (Pb)-free reflow soldering
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
1.0
Applications
0.2
Phototransistor
Part Number
Mounting
TEMT6200FX01
Infrared
Infrared
Sunlight (5800 K)
Incandescent light
TEMT6200FX01
0.8
TEMT6200FX01
0.8
TEMT6200FX01
0.6
0.6
0.4
0.4
0.0
Human Eye
Silicon Photodiode
0.2
Photopic Peak 550 nm
0
500
700
1000
1500
Wavelength (nm)
• Ambient light sensor for control of display backlight dimming in LCD
displays and keypad backlighting of mobile devices and in industrial
on/off-lighting operation.
- Automotive sensors
- Mobile phones
- Notebook computers
- PDAs
- Cameras
- Dashboards
Output
Visible
1.0
0.0
0
500
700
1000
1500
Wavelength (nm)
Size (mm)
Peak Wavelength
(nm)
Bandwidth (nm)
Angle of Half
Sensitivity (±*)
Light Current
Standard A (µA)
SMD
1.2 x 2.0 x 0.85
550
450 – 610
60
12
TEMT6000X01
SMD
2.0 x 4.0 x 1.0
570
430 – 800
60
50
TEPT5700
Leaded
5mm, flat top
570
430 – 800
50
75
TEPT5600
Leaded
5mm
570
430 – 800
20
350
TEPT4400
Leaded
3mm
570
430 – 800
30
200
TEMD6010FX01
SMD
2.0 x 4.0 x 1.0
540
430 – 610
60
0.04
TEMD5510FX01
SMD
4.2 x 5.0 x 1.1
540
430 – 610
65
1
TEMD6200FX01
SMD
1.2 x 2.0 x 0.85
540
430 – 610
60
0.04
BPW21R
Leaded
TO5 – 8mm
565
420 – 675
50
0.9
Photodidode
TEMD5510FX01
44 www.ttieurope.com
TEMT6200FX01
TEMD6200FX01
TEMT6000X01
TEMD6010FX01
TEPT5600
TEPT4400
TEPT5700
BPW21R
VISHAY
Fully Integrated Proximity and Ambient Light Sensor
The VCNL4010 is a fully integrated proximity and ambient light sensor. Fully integrated means
that the infrared emitter is included in the package. It also has 16-bit resolution, a signal processing IC,
standard I2C communication and an interrupt function.
Features & Benefits
• No mechanical barriers required; no crosstalk concerns
• Proximity range up to 20cm (7.9 in)
• Programmable LED drive current: 10mA to 200mA in 10mA steps • Programmable measurement rate from 1Hz to 250Hz • 16 bit resolution with I2C interface
• Ambient light sensing from 0klx to 13klx with 0.33lx resolution
• Interrupt function
Applications
• Turn off LCD backlight or lock touchscreen based on proximity for smart phones, touch phones and tablets
• Optical switch for industrial devices and displays
• Touchless lighting control
Avalanche Rectifiers
Low-profile, surface-mount standard, fast, and ultrafast avalanche rectifiers feature 20mJ
EAS avalanche capability and industry-high forward currents to 4 A in miniature SMP and
SMPC packages
Features & Benefits
• 20mJ EAS avalanche capability
• Low-profile packages for space savings:
• SMP package features 1.0mm profile, while the SMPC offers a profile of 1.1mm
• High forward currents:
– Up to 4A in the SMPC package
– Up to 1.5A in the SMP package
• Offer designers a choice of 200V, 400V, 600V, 800V, or 1000V reverse voltage ratings
Applications
• Secondary rectification and freewheeling diodes for very fast switching of ac-to-dc and dc-to-dc converters in high-temperature conditions for
consumer, lighting, and automotive applications
Part numbers: AS1Px, AR1Px, AU1Px, AS3Px, AS4Px, AR3Px, AR4Px, AU2Px and AU3Px
LED Modules for Street and Industrial Lights
Features & Benefits
• 12, 24 or 36 LEDs per panel
• Thickness of aluminium core > 0.75mm
• Single side, single layer PCB
• Reflectors and drivers available
• Maximum forward current 750mA per row
• LM80 Certified LEDs
• Two options for angle of half intensity:
– VLSL5 – vertical 70°, horizontal 120°
– VLSL4 – 160°
• Binning by luminous flux and color
Colour
Temperature (˚K)
Matrix (R x C)
5000-7000
VLSLx036A
6x6
36
VLSLx112A
2x6
12
4x6
24
6x6
36
Part Number
VLSLx012A
Cool
Neutral
VLSLx024A
VLSLx124A
4000
VLSLx136A
VLSL4212A
Warm
VLSL4224A
VLSL4236A
3500
LEDs
Viewing Angle (˚)
Luminous Flux
2x6
12
24
160
or
120 x 70
1740
4x6
160
or
120 x 70
1500
2x6
12
4x6
24
6x6
36
Reflectors
Driver
VLSL-REFL01
up to 6 per panel
VLSL3-DU
3480
5220
3000
4500
1500
160
3000
4500
VISHAY
White Colour
www.ttieurope.com 45
YAGEO
Recommended Products
The lighting industry is undergoing rapid changes in the quest for
energy efficiency, longer life, and performance. As the world’s leading
supplier of passive components, Yageo offers a full range of reliable,
efficient and innovative components for illumination and lighting
applications. The components are suitable for indoor, outdoor and
architectural lighting.
Mid-Voltage MLCC-CC (≥ 100V) Series
High Capacitance MLCC
Features & Benefits
Features & Benefits
Applications
Applications
• Materials: NP0 and X7R
• Size: 0402-1812
• Voltage from 100V-630V
• For high frequency snubber
• Decoupling/smoothing function
• Power supplies
High-Voltage MLCC-CC (≥ 100V) and SC Series (≥ 1KV)
Features & Benefits
• Materials: NP0 and X7R
• Size: 1206-1812
• Voltage from 1kV-3kV
• High DC withstanding voltage
(≥1.2V Rated)
• Safety Certification Series:
– TUV certification for 1808 and
1812 size (X1/Y2 & X2/Y3)
– UL certification for 1808 and 1812
size (X1/Y2)
• Excellent stability & HV
performance
Applications
• Reinforced insulation prevents fires,
electric shocks and other potential
hazards
• Rectification circuit
Thin Film Precision Grade Resistors – RT Series
Features & Benefits
• High precision, high stability
• Low TCR/low noise
• High accuracy (±0.05%, ±0.1%,
±0.25%, ±0.5%, ±1%)
Applications
• Electronic ballasts
• Materials: X5R, X7R and Y5V
• Size: 0402-1812
• Capacitance from 1μF-100μF
• Rated working voltage from
6.3V-50V
• Decoupling and smoothing
Low TCR Current Sensing Resistors – PT Series
Features & Benefits
• Excellent TCR compared to thick
film
low ohmic counterparts
• Precision current sensing control
• Ultra low ohmic down to 0.001Ω
• Power enhancement
• Highly reliable multilayer electrode
construction
• Compatible with RoHS directive
2002/95/EC
Applications
• Power supplies
• DC-DC Converters
Metal Glazed Film Resistors – HHV Series
Features & Benefits
• High ohmic/voltage
• High pulse loading capability (up
to 7kV)
• Rmax.= 68MΩ, Umax.= 14kV
• Excellent stability and reliability
• Flameproof multilayer coating
(UL94V-0)
Applications
• Picture tubes
• Electronic ballasts
46 www.ttieurope.com
TTI
Europe’s largest inventory o
f Passive, Interconnect,
Discrete, Relay & Switch Components.
39 Sales locations across Europe
Connector assembly & value added services
Mechanised distribution centres
Inventory profile over 500,000 part numbers
Ship over 3.5 million line items annually
Only distributor with catalogue division – Mouser
Industry leading service, support and value
European HQ, Munich
10,000m2 of dedicated
warehouse space
Global Visibility
on a centralised
inventory system
CORPORATE
HEADQUARTERS
TTI, Inc.
2441 Northeast Parkway
Fort Worth, Texas 76106
U.S.A.
T: +1 817 740 9000
F: +1 817 740 9898
E: information@ttiinc.com
EUROPEAN
HEADQUARTERS
TTI, Inc.
Ganghoferstr. 34
82216 Maisach-Gernlinden
Germany
T: +49 (0) 81 42 66 80 0
F: +49 (0) 81 42 66 80 490
E: sales@de.ttiinc.com
www.ttieurope.com
TTI, Inc. Sales
AUSTRIA
Vienna
T: +43 (0) 18 79 85 90
F:+43 (0) 18 79 85 90 10
E:sales.vienna@at.ttiinc.com
BENELUX
Eindhoven
T: +31 (0) 40 290 1616
F:+31 (0) 40 290 1610
E:sales.benelux@nl.ttiinc.com
BULGARIA
T: +359 (0) 52 51 10 59
F:+359 (0) 52 51 10 59
E:sales.varna@bg.ttiinc.com
CZECH/SLOVAK REPUBLIC
Brno
T: +420 541 126 710
F:+420 541 126 730
E:sales.brno@cz.ttiinc.com
DENMARK
Copenhagen
T: +45 (0) 43 29 35 35
F:+45 (0) 43 29 35 30
E:sales.copenhagen@dk.ttiinc.com
Hammel
T:+ 45 (0) 38 41 31 00
F:+ 45 (0) 70 70 11 74
E: sales.copenhagen@dk.ttiinc.com
FINLAND
Espoo
T: +358 98 94 65 200
F: +358 98 94 65 210
E:sales.finland@fi.ttiinc.com
FRANCE
Dortmund
T: +49 (0) 2301 91 304 0
F:+49 (0) 2301 91 304 11
E:sales.dortmund@de.ttiinc.com
Berlin
T: +49 (0) 30 8877 40 200
F:+49 (0) 30 8877 40 299
E:sales.berlin@de.ttiinc.com
HUNGARY
Budapest
T: +36 1 40 22 111
F:+36 1 40 22 105
E:sales.budapest@hu.ttiinc.com
IRELAND
T: +353 (0) 21 480 8070
F:+353 (0) 21 432 3350
E:sales.ireland@ie.ttiinc.com
SOUTH AFRICA
Johannesburg
T: +27 (0) 11 795 2690
F:+27 (0) 11 795 1298
E:sales.southafrica@za.ttiinc.com
SPAIN
Barcelona
T: +34 (0) 93 645 25 75
F:+34 (0) 93 645 25 93
E:sales.barcelona@es.ttiinc.com
ISRAEL/Net-Aye
ITALY
Vizcaya
T: +34 (0) 94 623 25 80
F:+34 (0) 94 623 25 81
E:sales.bilbao@es.ttiinc.com
T: +972 (0) 9 7687777
F:+972 (0) 9 7667107
E:sales@il.ttiinc.com
Milan
T: +39 02 822 521
F:+39 02 822 522 33
E:sales.milan@it.ttiinc.com
Padova
T: +39 049 774 683
F:+39 049 792 7738
E:sales.milan@it.ttiinc.com
Bologna
T: +39 051 632 1863
F:+39 051 714 839
E:sales.milan@it.ttiinc.com
Florence
T: +39 055 0946 376
F:+39 055 0946 379
E:sales.firenze@it.ttiinc.com
Bruz
T: +33 (0)2 99 77 60 84
F:+33 (0)2 99 41 18 47
E:sales.toulouse@fr.ttiinc.com
Drammen
T: +47 (0) 32 20 09 50
F:+47 (0) 32 20 09 51
E:sales.norway@no.ttiinc.com
Munich
T: +49 (0) 81 42 66 80 110
F:+49 (0) 81 42 66 80 199
E:sales.munich@de.ttiinc.com
Sankt-Petersburg
T: +7 812 9726498
F: +7 812 4962053
E: andrey.kuklin@ru.ttiinc.com
Madrid
T: +34 (0) 91 416 11 90
F:+34 (0) 91 416 12 90
E:sales.madrid@es.ttiinc.com
Brive
T: +33 (0) 5 55 92 92 93
F:+33 (0) 5 55 92 91 90
E:sales.toulouse@fr.ttiinc.com
(Covering North Africa)
GERMANY
RUSSIA
NORWAY
POLAND
Kwidzyn
T: +48 (0) 55 279 67 57
F:+48 (0) 55 279 75 50
E:sales.poland@pl.ttiinc.com
SWEDEN
Stockholm
T: +46 (0) 8 594 11 800
F:+46 (0) 8 594 11 801
E:sales.stockholm@se.ttiinc.com
Gothenburg
T: +46 (0) 31 741 12 90
F:+46 (0) 31 741 12 91
E:sales.gothenburg@se.ttiinc.com
SWITZERLAND
Baar
T: +41 (0) 41 76741 90
F:+41 (0) 41 76741 99
E:sales.swiss@ch.ttiinc.com
TUNISIA
T: +216 71433144
F:+216 71428539
E:nabil.soussi@fr.ttiinc.com
TURKEY
Istanbul
T: +90 216 339 2247
F:+90 216 339 2257
E:sales.istanbul@tr.ttiinc.com
UNITED KINGDOM
Hanover
T: +49 (0) 5 11 7 80 59 0
F:+49 (0) 5 11 7 42 49 0
E:sales.hannover@de.ttiinc.com
PORTUGAL
High Wycombe
T: +44 (0)1494 460000
F: +44 (0)1494 460090
E: sales.london@uk.ttiinc.com
Pforzheim
T: +49 (0) 7231 14788 0
F:+49 (0) 7231 14788 99
E:sales.stuttgart@de.ttiinc.com
ROMANIA
Basildon
T: +44 (0)1268 889520
F: +44 (0)1268 888047
E: sales.essex@uk.ttiinc.com
Frankfurt
T: +49 (0) 6102 5999 100
F:+49 (0) 6102 5999 199
E:sales.frankfurt@de.ttiinc.com
T: +34 (0) 93 645 25 75
F:+34 (0) 93 645 25 93
E:sales.portugal@pt.ttiinc.com
Cluj Napoca
T: +40 (0) 264 439 103
F:+40 (0) 264 439 106
E:sales.romania@ro.ttiinc.com
Military Aerospace Office
T: +44 (0)1268 889520
F: +44 (0)1268 419225
E: mil-aero@uk.ttiinc.com
Contact TTI today to find out what a true specialist can offer.
ISO 9001:2008
L0312V1
48 www.ttieurope.com
TTI, Inc. – Never Short on Solutions
Registered