CLEAN-TRAK TOP-LOAD
FLUSH CEILING SYSTEM
CLEANPAK's cleanroom filtered ceiling system with continuous grid in both directions features powder coated
extruded aluminum grid channels, integrated lighting, integrated sprinkler system, associated connectors, grid
hanging all-thread rod from grid to turnbuckle, filters, and accessories such as filter dampers, blank pans, return
air grilles, clips, and miscellaneous hanging hardware and clips for wall head track and grid face hanging support.
The system enables up to full filter coverage by moving the lighting out of the grid opening and placing it in a
linear grid channel. It allows full flexibility in cleanroom, wall, equipmment, and track layouts. Filters and
components can be top loaded or loaded from the bottom by tipping the component through the grid opening.
The ceiling fully integrates with air movement devices for complete systems like fan tunnel systems with RAHs on
top of plenum, remote RAHs ducted to filters in grid, remote RAHs pressurizing interstitial, end blower modules,
vertical side blower modules, or FFUs in grid or plenum.
KEY FEATURES
Flush ceiling grid module.
Extruded aluminum top-load grid.
Welded modules up to 8x24 foot for rapid
field installation. Optional stick-built grid.
Integral lighting--T8, T5, or LED.
Integral fire protection. A true flush concealed sprinkler head can be used in the grid extrusion.
Clean-Screens for washing out particles under grid channel.
Optional GelLink seal that flows between modules for leak-free module to module joints.
Optional integrated ionization wiring.
Option to be walkable on the filters, FFUs, or blank pans.
Optional Equalizer can be used to balance the ceiling filters.
Optional plenum can.
CONDENSED SPECIFICATION
optional items noted in [ ]
The grid [plenum] system shall be the Clean-Trak top-load flush as manufactured by CLEANPAK. The cleanroom filtered ceiling system shall
consist of a continuous ceiling grid with powder coated extruded aluminum grid channel, integrated lighting, integrated sprinkler system,
associated connectors, grid hanging all-thread rod from grid to turnbuckle, nominal 2x4 foot [4x4 foot] filters, and accessories such as filter
dampers, blank pans, return air grilles, clips, and miscellaneous hanging hardware and clips for wall head track, grid face hanging, and
piping. The ceiling grid shall have a top trough to accept gel in the field for a leak-free seal of components. [The ceiling system shall have
gasket on the top for a non-pressurized interstitial application.] [The ceiling system shall also include a positively pressurized plenum that is
an integral part of the ceiling grid. The ceiling grid for plenums is required to have gel seals for sealing the filters to the grid. Gasketed
seals between filter and grid for positively pressurized plenums are not allowed.] [The plenum shall have a series of fans installed in the
roof to provide for airflow through the system.] The grid extrusion shall have integrated flush lighting within the grid channel that is capable
of 100% filter coverage of the entire ceiling. The grid extrusion shall be capable of accepting a true flush sprinkler head within the width of
the extrusion. [The grid shall have a GelLink seal that flows gel between module joints.] [The grid shall have Clean-Screens at the grid face
that have perimeter slots to jet air underneath the grid member and wash out the area of particles.]
CES Group, LLC CLEANPAK | 19855 SW 124th Ave, Tualatin, OR 97062 | 503.639.0113 | www.huntair.com
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/07/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD
MASTER TOP ISO
CHECKED BY:
ZC
SCALE:
2.6TopLoad.idw
1/32
SIZE:
B
JOB NO:
DRAWING NO.:
SHEET
2
OF
35
AE
AE
AD
AC
AD
A
N
AC
AH
A
N
E
P
G
E
G
Y
P
F
R
AH
AB
F
AA
AB
Y
AA
R
H
T
H
K
K
C
T
C
D
D
AF
AF
AG
AG
B
U
B
U
M
V
M
V
J
J
W
W
L
AJ
AL
L
AJ
AL
AT
AM
AT
AM
AR
AK
AK
AN
AN
AR
AP
AP
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/07/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD
MASTER PLAN VIEW
CHECKED BY:
ZC
SCALE:
2.6TopLoad.idw
3/32
SIZE:
E
JOB NO:
DRAWING NO.:
SHEET
3
OF
35
ITEM
5.500
STOCK NUMBER
DESCRIPTION
QTY
1
240-10-24
Extr 2.6 Int Gel TB
2
240-10-25
Extr 2.6 Int Gel
3
240-10-33
Extr 2.6 Int GSK TB
4
240-10-66
Extr 2.6 Ext Gel Link Perim
5
240-10-67
Extr 2.6 Ext Gel Link Plen RVT
6
240-10-41
Extr 2.6 Ext Gskt
5.500
4.225
3.365
2.625
2.625
2.600
2.600
2.600
1
2
3
8.460
8.000
8.000
7.610
5.050
5.050
2.625
2.625
1.300
1.300
4
5
6
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/07/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
EXTRUSION PROFILES
CHECKED BY:
ZC
SCALE:
2.6TopLoad.idw
3/8
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
4
OF
35
1"
SCH 40 PIPE
(BY OTHERS)
TYPE "B" COUPLING
THREADED 1" FEMALE
EIGHT LUG
LOCKING NUT
MIRAGE CONCEALED
SPRINKLER
SECTION A-A
SCALE 1 / 2
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
CHECKED BY:
ZC
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
SPRINKLER CONCEALED HARD PIPED
TYPE "B" COUPLING
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
5
OF
35
1"
SCH 40 PIE
(BY OTHERS)
TYPE "M" COUPLING
THREADED 1" FEMALE
EIGHT LUG
LOCKING NUT
SPRINKLER HEAD
(INSTALLED BY OTHERS)
SECTION B-B
SCALE 1 / 2
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
SPRINKLER PENDANT HARD PIPED
TYPE "M" THREADED COUPLING
CHECKED BY:
ZC
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
6
OF
35
SPRINKLER HOSE
SPRINKLER PORT
SPRINKLER HEAD
(INSTALLED BY OTHERS)
SECTION C-C
SCALE 1 / 2
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
SPRINKLER FLEXIBLE HOSE
CHECKED BY:
ZC
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
7
OF
35
PORT
SECTION D-D
SCALE 1 / 2
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
PORT
CHECKED BY:
ZC
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
8
OF
35
NOMINAL GRID CENTERLINES - 1.625"
4.296
6.921
SECTION E-E
SCALE 1 / 4
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GEL GRID
FILTER TOP LOAD PLEMUN STYLE
CHECKED BY:
ZC
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
9
OF
35
NOMINAL GRID CENTERLINES - 1.625"
8.679
11.304
SECTION F-F
SCALE 1 / 4
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GEL GRID
FILTER TOP LOAD TERMINAL
DUCTED FILTER STYLE
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
10
OF
35
NOMINAL GRID CENTERLINES - 1.625"
SECTION G-G
SCALE 1/4
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GEL GRID
TOP LOAD BLANK PAN GEL
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
11
OF
35
EQUALIZER SIZED AT
NOMINAL GRID CENTERLINES - 1.625"
SECTION H-H
SCALE 1/4
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAG GEL GRID
EQUALIZER ON
TOP LOAD PLENUM FILTER
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
12
OF
35
FFU SIZED AT
NOMINAL GRID CENTERLINES - 1.500"
10.250
17.171
16.230
13.921
6.921
FILTER SIZED AT
NOMINAL GRID CENTERLINES - 1.625"
SECTION J-J
SCALE 1/4
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
18/18/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GEL GRID
FFU ON TOP LOAD PLENUM
STYLE FILTER
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
13
OF
35
SECTION K-K
SCALE 1 / 2
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/08/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
FLUSH LIGHT T5
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
14
OF
35
SECTION L-L
SCALE 1 / 2
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/09/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
FLUSH LIGHT T8
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
15
OF
35
EXTERIOR GRID PROFILE
BOLT HOLES ARE TYPICALLY
SPACED 6.0" FROM EACH END
OF PLENUM AND 24.0" O.C.
5/16" WASHER
5/16-18 WHIZ NUT
5/16-18 x 3/4" BOLT
EXTERIOR PUNCHED
FOR GEL SHARE
GEL POURED IN FIELD
5.050
TYP.
FIELD CAULKING
2.600
FIELD INSTALLED
LIGHT FIXTURE
(IF APPLICABLE)
SECTION M-M
SCALE 1 / 2
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/09/13
CHECKED BY:
CLEANPAK
a CES Group Brand
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
TITLE:
2.6 TOP LOAD GEL GRID
GEL-LINK MODULE TO MODULE JOINT
MODULE SEAM LIGHTING (IF APPLICABLE)
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
16
OF
35
PERIMETER GRID PROFILE
5/16-18 WHIZ NUT
5/16" WASHER
BOLT HOLES IN MODULES
ARE TYPICALLY SPACED
6.0" FROM EACH END
OF PLENUM AND 24" O.C.
5/16-18 x 0.75" BOLT
5.050
TYP.
SECTION N-N
SCALE 1 / 2
FIELD CAULKING
FACE PLATE W/ GRID CLIP
NOTES:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER MITERS ARE
TO BE DONE IN THE FIELD. SOME BOLT HOLES IN PERIMETER GRID
PIECES WILL NEED TO BE CUSTOM DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/09/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
PERIMETER GRID
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
17
OF
35
BOLT HOLES IN MODULES
ARE TYPICALLY SPACED
6.0" FROM EACH END
24.0" O.C.
PERIMETER GRID
PROFILE
5/16-18 WHIZ NUT
5/16" WASHER
5/16-18 x 0.75"
BOLT
FIELD CAULKING
FACE PLATE W/ GRID CLIP
FIELD GASKET OR
CAULKING BY OTHERS
SECTION P-P
SCALE 1 / 2
CLOSURE PLATE TRIMED
TO WIDTH IN FIELD
NOTES:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER MITERS ARE
TO BE DONE IN THE FIELD. SOME BOLT HOLES IN PERIMETER GRID
PIECES WILL NEED TO BE CUSTOM DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/09/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
PERIMETER GRID WITH
CLOSURE PLATE TO WALL
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
18
OF
35
PREIMETER GRID PROFILE
BOLT HOLES IN
MODULES ARE
TYPICALLY SPACED
6.0" FROM EACH
END OF PLENUM
AND 24.0" O.C.
5/16" WASHER
5/16-18 x .75" BOLT
5/16-18 WHIZ NUT
ATTACHMENT TO
WALL BY OTHERS
FIELD CAULK
BY OTHERS
FIELD CAULKING
FACE PLATE WITH
GRID CLIP
FIELD GASKET OR
CAULKING BY OTHERS
SECTION R-R
SCALE 1 / 2
CLOSURE PLATE TRIMMED
TO WIDTH IN FIELD
NOTES:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER
MITERS ARE TO BE DONE IN THE FIELD. SOME BOLT HOLES
IN PERIMETER GRID PIECES WILL NEED TO BE CUSTOM
DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/12/13
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/2
CLEANPAK
a CES Group Brand
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
TITLE:
2.6 TOP LOAD GRID
PERIMETER GRID
WITH CLOSURE PLATE AND
GEL SEALED FUNCTIONAL WALL CLOSURE
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
19
OF
35
PERIMETER GRID PROFILE
5/16" WASHER
5/16-18 WHIZ NUT
5/16-18 x 3/4" BOLT
BOLT HOLES IN MODULES
ARE TYPICALLY SPACED
6.0" FROM EACH END OF
PLENUM AND 24.0" O.C.
FIELD CAULKING
SECTION T-T
SCALE 1 / 2
1"x1" ANGLE WELDED
TO SHIP LOOSE
PERIMETER GRID
NOTES:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER MITERS ARE
TO BE DONE IN THE FIELD. SOME BOLT HOLES IN PERIMETER GRID
PIECES WILL NEED TO BE CUSTOM DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/12/13
CLEANPAK
a CES Group Brand
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
TITLE:
2.6 TOP LOAD GRID
PERIMETER GRID WITH ANGLE LEDGE
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
20
OF
35
SHEET METAL
Z PIECE
BY OTHERS
FIELD CAULKING
WALL AND COVING
BY OTHERS
SECTION U-U
SCALE 1 / 2
NOTES:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER
MITERS ARE TO BE DONE IN THE FIELD. SOME BOLT HOLES
IN PERIMETER GRID PIECES WILL NEED TO BE CUSTOM
DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/12/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
PERIMETER GRID INTERFACE
TO WALL COVED
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
21
OF
35
FIELD CAULKING
HEAD TRACK
BY OTHERS
HEAD TRACK BY OTHERS
WALL TO HEAD
TRACK BY OTHERS
WALL TO HEAD
TRACK BY OTHERS
AT PERIMETER GRID SECTION V-V
SCALE 1 / 2
AT INTERIOR GRID SECTION W-W
SCALE 1 / 2
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/12/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
WITH WALL INTERFACE
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/2
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
22
OF
35
BLANK PAN SIZED AT
NOMINAL GRID CENTERLINES - 1.250"
SECTION Y-Y
SCALE 5/16
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/15/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GASKETED GRID
TOP LOAD BLANK PAN GASKET
CHECKED BY:
SCALE:
2.6TopLoad.idw
5/16
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
23
OF
35
SIZED AT
NOMINAL GRID CENTERLINES - 1.40"
SECTION AA-AA
SCALE 5/16
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/15/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GASKETED GRID
FILTER TOP LOAD TERMINAL
DUCTED FILTER STYLE
CHECKED BY:
SCALE:
2.6TopLoad.idw
5/16
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
24
OF
35
FILTER SIZED AT NOMINAL GRID CENTERLINES - 1.400"
FFU SIZED AT NOMINAL GRID CENTERLINES - 1.750"
16.421
13.171
SECTION AB-AB
SCALE 5/16
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/15/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GASKETED GRID
FFU ON TOP LOAD PLENUM
STYLE FILTER WITH TOP FLANGE
CHECKED BY:
SCALE:
2.6TopLoad.idw
5/16
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
25
OF
35
SECTION AC-AC
TYPE 3B HANGER GRID TO GRID
LOAD CAPACITY: 3.75 Kips
SECTION AD-AD
TYPE 2B HANGER MIDSPAN
LOAD CAPACITY: 3.75 Kips
SECTION AE-AE
TYPE 4X HANGER CORNER
LOAD CAPACITY: 2.75 Kips
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/19/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
TYPICAL HANGERS 1/2" ATR
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
B
JOB NO:
DRAWING NO.:
SHEET
26
OF
35
SECTION AF-AF
TYPE 3C HANGER GRID TO GRID
LOAD CAPACITY: 6.97 Kips
SECTION AG-AG
TYPE 3C HANGER MIDSPAN
LOAD CAPACITY: 6.97 Kips
SECTION AH-AH
TYPE 4Z HANGER CORNER
LOAD CAPACITY: 2.75 Kips
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/19/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
TYPICAL HANGERS 5/8" ATR
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
B
JOB NO:
DRAWING NO.:
SHEET
27
OF
35
5/16-18 WHIZ NUT
PERIMETER GRID
PROFILE
5/16" WASHER
5/16-18 x 0.75"
BOLT
5.050
BOLT HOLES IN MODULES
ARE TYPICALLY SPACED 6.0"
FROM EACH END OF PLENUM
AND 24" O.C.
FACE PLATE w/
GRID CLIP
FIELD CAULKING
SECTION AJ-AJ
SCALE 1 / 4
NOTE:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER
MITERS ARE TO BE DONE IN THE FIELD. BOLT HOLES IN
PERIMETER GRID PIECES WILL NEED TO BE CUSTOM
DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/19/13
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD PLENUM
PERIMETER GRID
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
28
OF
35
BOLT HOLES IN MODULES
ARE TYPICALLY SPACED
6.0" FROM EACH END
OF PLENUM AND 24" O.C.
PERIMETER GRID
PROFILE
5/16" WASHER
5/16-18 WHIZ NUT
5/16-18 x 3/4" BOLT
1"x1" ANGLE WELDED
TO SHIP LOOSE
PERIMETER GRID
FIELD CAULKING
SECTION AK-AK
SCALE 1 / 4
NOTE:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER
MITERS ARE TO BE DONE IN THE FIELD. BOLT HOLES IN
PERIMETER GRID PIECES WILL NEED TO BE CUSTOM
DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/19/13
CLEANPAK
a CES Group Brand
FACE PLATE w/
GRID CLIP
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
TITLE:
2.6 TOP LOAD PLENUM
PERIMETER GRID WITH ANGLE LEDGE
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
29
OF
35
PERIMETER GRID
PROFILE
BOLT HOLES IN MODULES
ARE TYPICALLY SPACED
6.0" FROM EACH END OF
PLENUM AND 24.0" O.C.
5/16" WASHER
5/16-18 x .75"
BOLT
5/16-18 WHIZ NUT
FIELD CAULKING
FACE PLATE w/
GRID CLIP
CLOSURE PLATE TRIMMED
TO WIDTH IN FIELD
NOTE:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER
MITERS ARE TO BE DONE IN THE FIELD. BOLT HOLES IN
PERIMETER GRID PIECES WILL NEED TO BE CUSTOM
DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/20/13
SECTION AL-AL
SCALE 1 / 4
CLEANPAK
a CES Group Brand
TITLE:
FIELD GASKET OR
CAULKING BY OTHERS
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD PLENUM
PERIMETER GRID WITH
CLOSURE PLATE TO WALL
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
30
OF
35
BOLT HOLES IN MODULES
ARE TYPICALLY SPACED
6.0" FROM EACH END OF
PLENUM AND 24.0" O.C.
PERIMETER GRID
PROFILE
5/16" WASHER
5/16-18 x .75" BOLT
5/16-18 WHIZ NUT
GEL POURED IN FIELD
ATTACHMENT TO
WALL BY OTHERS
FIELD CAULK
BY OTHERS
EXTERIOR PUNCHED
FOR GEL SHARE
FIELD CAULKING
FACE PLATE WITH
GRID CLIP
FIELD GASKET OR
CAULKING BY OTHERS
SECTION AM-AM
SCALE 1 / 4
NOTE:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER
MITERS ARE TO BE DONE IN THE FIELD. BOLT HOLES IN
PERIMETER GRID PIECES WILL NEED TO BE CUSTOM
DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/20/13
CLEANPAK
a CES Group Brand
2.6 TOP LOAD PLENUM
PERIMETER GRID WITH
CLOSURE PLATE TO WALL AND GEL
SEALED FUNCTIONAL WALL CLOSURE
SCALE:
2.6TopLoad.idw
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
TITLE:
CHECKED BY:
1/4
CLOSURE PLATE TRIMMED
TO WIDTH IN FIELD
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
31
OF
35
PARIMETER GRID
5/16-18 WHIZ NUT
5/16" WASHER
5/16-18 x .75"
BOLT
SHEET METAL
Z PIECE
BY OTHERS
FIELD CAULKING
WALL AND COVING
BY OTHERS
NOTE:
FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER
MITERS ARE TO BE DONE IN THE FIELD. BOLT HOLES IN
PERIMETER GRID PIECES WILL NEED TO BE CUSTOM
DRILLED IN THE FIELD.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/20/13
SECTION AN-AN
SCALE 1 / 4
CLEANPAK
a CES Group Brand
TITLE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD PLENUM
PERIMETER GRID INTERFACE
TO WALL COVED
CHECKED BY:
SCALE:
2.6TopLoad.idw
1/4
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
32
OF
35
EXTERIOR GRID
PROFILE
5/16" WASHER
5/16-18 WHIZ NUT
5/16-18 x .75"
BOLT
FIELD CAULKING
SECTION AP-AP
SCALE 1 / 4
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/20/13
CLEANPAK
a CES Group Brand
TITLE:
SCALE:
2.6TopLoad.idw
SIZE:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD PLENUM
MODULE TO MODULE JOINT
MODULE SEAM LIGHTING
WHERE APPLICABLE
CHECKED BY:
1/4
FIELD INSTALLED
LIGHT FIXTURE
A
JOB NO:
DRAWING NO.:
SHEET
33
OF
35
ATR BOLTED TO HOLE IN TOP OF PLENUM
(HANGING ATR AND HARDWARE BY OTHERS)
1. BOLT TOGETHER LOOSELY WHEN SUSPENDING MODULES
5. TIGHTEN SUSPENSION HARDWARE
0
1 .5 Y P .
T
1
TY .50
P.
4. BOLTS ALONG TOP OF PLENUM
PLENUM
5/8" x 1-1/4
A325 BOLT,
TYP.
5/8" F436 FLAT
WASHER, TYP.
5/8" F436
FLAT WASHER,
TYP.
3. BOLTS AT PLENUM CORNERS
5/8" A194 GR2H
NUT, TYP.
5/16" WHIZ
NUT
5/16" FLAT
WASHER
5/16 x 3/4"
GR5 BOLT
2. BOLTS AT PLENUM GRID
CAULK SEAM CONTINUOUSLY AFTER
ALL THE MODULES ARE BOLTED
TOGETHER PRIOR TO INSTALLING
FIELD-INSTALLED LIGHT FIXTURES
SECTION AR-AR
SCALE 3/16
NOTE:
NUMBERS INDICATE SEQUENCE ORDER
FOR MODULE INSTALLATION ASSEMBLY.
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/20/13
CHECKED BY:
CLEANPAK
a CES Group Brand
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
TITLE:
2.6 TOP LOAD GRID
BOLTING DETAIL
WELDED PLENUM TO WELDED PLENUM
SCALE:
2.6TopLoad.idw
3/16
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
34
OF
35
ROOF PANEL
WELDED SPRINKLER
COUPLER
SPRINKLER HEAD INSTALLED
IN FIELD BY OTHERS
SECTION AT-AT
SCALE 3/32
THIS DRAWING IS THE
PROPERTY OF
HUNTAIR CLEANPAK
AND CAN NOT BE
REPRODUCED IN
WHOLE OR IN PART,
NOR DELIVERED TO
OTHERS
WITHOUT THE
EXPRESS WRITTEN
PERMISSION OF
HUNTAIR CLEANPAK.
FILE NAME:
DRAWN BY:
Jon H
ISSUED ON:
08/21/13
CLEANPAK
a CES Group Brand
TITLE:
CHECKED BY:
19855 SW 124th AVE.
TUALATIN, OR 97062
Phone (503) 639-0113
www.huntair.com
2.6 TOP LOAD GRID
TYPICAL PLENUM SPRINKLER PIPING
SCALE:
2.6TopLoad.idw
3/32
SIZE:
A
JOB NO:
DRAWING NO.:
SHEET
35
OF
35