ITEM No. 8. Digital Multimeter
06 No
Specification:
1. Built-in LED flashlight to illuminate test area
2. Data logging capability (stores up to 10 readings)
3. Measurement capability of Voltage (AC, DC), Current (AC,DC), Frequency, Capacitance,
Resistance, Temperature, Diode, continuity
4. IR-to-USB connectivity to transfer data to PC for record (Optional) IR port should be built in as
standard.
DETAIL SPECIFICATIONS:
•
•
•
•
•
•
•
•
DC Voltage
AC Voltage (True RMS)
DC Current
AC Current (True RMS)
Resistance
Capacitance
Frequency
Temperature
ITEM No. 9. Function Generator
: 600 mV – 600 V,
Resolution – 0.1 mV
: 600 mV – 600 V,
Resolution – 0.1 mV
: 60 µA – 10 A, Resolution – 0.01 µA
: 60 µA – 10 A, Resolution – 0.01 µA
: 600 Ω - 60 MΩ,
Resolution – 0.1 Ω
: 1000 nF – 10 mF,
Resolution – 1 nF
: 100 Hz – 100 KHz, Resolution – 0.01 Hz
: - 40°C to +1000°C for K type, Resolution – 0.1°C
02 No
Specification:
1)
2)
3)
4)
5)
6)
7)
Capable of Generating Standard Waveforms like: Pulse, Sine, Square, Triangle, Ramp.
Instrument should have option to upgrade as arbitrary waveform generator
Should have capability of AM, FM, PM, FSK, PWM, BPSK, Sum (Carrier + Modulation)
Linear & Logarithmic Sweep and Burst Mode of Operation.
Compatible with through USB, GP IB and LAN. It should also be compatible with LXI Class C
It should have graph mode for visual verification of Signal settings.
It should have the required optional Software for control and generation of arbitrary waveform from PC.
DETAILED TECHNICAL SPECIFICATION:-•
•
•
•
Frequency
Frequency Resolution
No of Channel
Amplitude
•
•
•
•
Amplitude Resolution
Harmonic distortion in
Sine wave Jitter (cycle-to-cycle, typ)
Phase Noise
Sweep
•
Burst
•
•
•
•
•
•
•
AM
FM
PM
PWM
FSK
BPSK
Power Supply
: 1 µ Hz. to 20 MHz for Sine, Square, Pulse
: 1 µ Hz.
:1
: 1 mVpp - 10 Vpp in 50 ohms,
2 mVpp to 20 Vpp into open circuit.
: 4 Digits
: < 40 ps rms
: - 125 dbc / Hz. At 100 KHz. Offset.
: Linear, Logarithmic, List (up to 128 user-defined frequencies).
: 1 to 1x108 cycles, or infinite. Start/stop phase -360° to 360°,
0.1° resolution
: Source both Internal & External, Depth 0 to 120 %.
: Source both Internal & External, Deviation 1µHz to 15 MHz.
: Source both Internal & External, Deviation 0 to 360°
: Source both Internal & External. Deviation 0 % to 100 %.
: Source Internal timer, Rate 0 Hz – 1 MHz
: Source Internal timer, Rate 0 Hz – 1 MHz
: 230 v,50 Hz. ac.
ITEM No. 10. A. DSO
01 No
Specification:
i)
Upgradable in nature in terms of bandwidth , addition of Digital Logic channels to work on Mixed
Signal mode
ii) Manadatory Optional Built in Waveform Generator
iii) High Update rate
iv) Optional Segmented Memory mode to capture selectively and storing important segments of Signals
only
DETAILED TECHNICAL SPECIFICATIONS :1) No. of Channels
2) Bandwidth
3) Maximum Input
4) Timebase Range
5) Vertical Sensetivity
6) Trigger System
7) Sampling Rate
8) Memory Depth
9) Waveform update Rate
10) Segmented Memory (Optional)
11) Automatic Parameter Measurement
12) Built in waveform generator (Optional)
13) Display System
14) Built in interface
ITEM No. 10. B. DSO
: 2
: 70 MHz. (upgradable upto 200 MHz)
: 400 V peak
: 5 nsec. to 50 sec/div
: 1mV/div – 5V/div
: Edge, Pulse Width , Pattern , Duration , Video.
: 2 GSa/s
: 100 Kpts. Standard .
: 50,000 waveforms / sec
: To capture selected segments of the waveform .
: Upto 23 parameters
: Sine , Square , Pulse , Ramp etc.
: 8.5 inch WVGA Colour
: USB 2.0 high speed device,
Optional LAN ,GP-IB and XGA output.
01 No
Specification:
1) No. of Channels
2) Bandwidth
3) Maximum Input
4) Timebase Range
5) Vertical Sensetivity
6) Trigger System
7) Sampling Rate
8) Memory Depth
9) Waveform update Rate
10) Segmented Memory (Optional)
11) Automatic Parameter Measurement
12) Acquisition modes
: 2
: 50 MHz.
: 400 V peak
: 5 nsec. to 50 sec/div
: 2mV/div – 10V/div
: Edge, Pulse Width , Force , Alternate , Video.
: 1 GSa/s
: 16 Kpts. Standard .
: 200 waveforms / sec
: To capture selected segments of the waveform.
: Upto 23 parameters
: Normal: Displays sampled data directly to the screen in
real time.
Averaging: Selectable from 2, 4,8,16, 32, 64, 128 or 256.
Sequence: Selectable 1 to 1,000 acquisition.
frames can be recorded, played back and stored
in the scope memory or external USB memory.
Peak detect: Captures high-frequency glitches as narrow
as 20 nsec when viewing signals at slow sweep speeds.
Roll:Waveform display rolls from right to left.
minimum horizontal scale setting is 50 msec/div.
12) Built in interface
ITEM No. 11. Power Supply
: Built-in USB host and device ports and software to make
documentation and PC connectivity easy.
03 No
Specification:
1.
2.
3.
4.
Built-in voltage and current measurement
Full protection from over-voltage and over-current
85-265 Vac Universal AC input
Fully compliant to LXI Class C specification Excellent load & line regulation
Detail Technical Specification :
•
•
•
•
•
•
No of Outputs
Output Ratings
Power
Ripple & Noise
Output Response Time
Programming Accuracy (for ± 25 V)
:3
: 0 to ± 25 V, 1 A; 0 to 6 V, 5 A
: 750 W
: CV – 100mVp-p, < 12 mVrms
: 0.15 s
: 0.05% + 20 mV
0.15% + 4 mA
•
Meter Resolution
: Voltage – 10 mV
Current – 10 mA
•
Maximum output float voltage
: ± 240 Vdc