Reset Form
Scarab 6730
TM
Die-Cast Aluminum, PAR30 Metal Halide
revision12/01/05 • 6730.pdf
Type:
Job:
Fixture Catalog number:
Approvals:
Fixture Options:
Ordered Separately from Fixture
See pages 2-3
Remote Mounting Options:
Fixture
/
/
Lamp Mode
Finish
Specifications
Housing: Die-cast, low copper (<0.6% Cu) aluminum body,
lamp housing and socket enclosure.
Swivel: Provides horizontal rotation independent of the threaded
mount. Swivel locked by J-20 stainless set screw. Die-cast
low copper (<0.6% Cu) aluminum with locking teeth and
K" solid brass NPT mount. Clear anodized prior to titanated
zirconium conversion coating for added corrosion resistance.
Lens Frame: Integral die-cast low copper (<0.6% Cu) aluminum
lens ring and glare shield.
Lens: Tempered clear soda lime glass with silicone gasket. Flush
with lens frame to promote water runoff when positioned upward.
Gasketing: Silicone gaskets used throughout.
Socket: Porcelain medium base.
Wiring: No. 18AWM rated 105°C.
Ballast: High power factor, long range ignitors, -20°F. starting,
mounted on tray, 120 volt standard.
Ballast Box: High temperature, compression molded featuring
long-fiber fiberglass impregnated heavy wall construction. Wall
separates ballast chamber from splice compartments, splice area
32 cu in.; prewired, two anti-siphon plugs to and from ballast
chamber. Conduit entry; two L" NPT for through wiring, one
K" NPT for remote access.
Ballast Cover: Cast bronze, supplied with K" NPSM for direct
mount, with stainless steel set screw lock. Flat for remote mount.
Finish: Super TGIC thermoset polyester powder coat paint,
2.5 mil nominal thickness, applied over a titanated zirconium
conversion coating; 2500 hour salt spray test endurance rating.
Standard colors are Black (BL), Dark Bronze (DB), and Verde
Green (GR).
Certification: UL Listed to U.S. and Canadian safety standards for
wet locations. Fixture manufacturer shall employ a quality
program that is certified to meet the ISO 9001:2000 standard.
4M"
8"r.
2B"
(109.5 mm)
ORDERING INFORMATION
Fixture
6730D Direct Mounting
6730R Remote Mounting
Lamp Mode1
35PMH120
35PMH208
35PMH240
35PMH277
35PMH347
Lamp PAR30
Socket Medium Base
ANSI Ballast M-130
Type
70PMH120
70PMH208
70PMH240
70PMH277
70PMH347
Lamp PAR30
Socket Medium Base
ANSI Ballast M-98
Type
Finish
BL
DB
GR
Black
Dark Bronze
Verde Green
1
70 PMH 120
Line Volts
Lamp Type:
PMH = Pulse Start
Metal Halide
Lamp Watts
9"
(28.6 mm)
Date:
Page: 1 of 7
Ordered Separately from Fixture
See pages 4-7
(54.0 mm)
5B"
(130.2 mm)
8"
(203.2 mm)
7C"
(187.3 mm)
(1) K" NPT
(2) L" NPT
DIRECT MOUNT
JBR mount shown, purchased separately.
REMOTE MOUNT
U.S. PATENT D424,731
Hubbell
Lighting, Inc.
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2005 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
5627305335
Scarab 6730
TM
Die-Cast Aluminum, PAR30 Metal Halide
revision12/01/05 • 6730.pdf
Type:
Job:
Page: 2 of 7
Fixture Options
Ordered Separately from Fixture
Colored Lens
Cat. No. (See right)
No Option
Molded colored glass lens, replaces standard clear glass lens in
fixture.
(See color samples on page 19 of the Kim H.I.D. Landscape catalog).
Cat. No.
Color
Description
RT73
Rose
Warms metal halide color. Deepens high
pressure sodium color to pink/orange.
AM73
Amber Warms metal halide color. Deepens high
pressure sodium color to yellow/orange.
RD73
Red
Deep color accent. Best used with high
pressure sodium lamps. NOTE: Very low
output with metal halide lamps.
BF73
Blue
Deep color accent. Best used with metal
halide lamps. NOTE: Very low output
with high pressure sodium lamps.
GR73
Green
Deep color accent. Blue shift with metal
halide lamps. Yellow shift with high
pressure sodium lamps.
Lens Accessories
Cat. No. (See right)
No Option
HL73 - Hex Cell Louver: Provides additional brightness control.
Constructed of hex cell aluminum louvers providing 45° cutoff,
mounted in a circular frame, finished in baked high-heat flat black.
Can be used in combination with colored lenses. Inserts behind lens
into lens gasket. Cannot be used in combination with
SL spread or PL prismatic lenses.
Cat. No.
HL73
Hex Cell Louver
PL73 - Prismatic Lens: Softens lamp distribution and flattens beam
spread. Best with flood lamps. Inserts behind lens into lens gasket.
Cannot be used in combination with HL73 hex cell louver.
Cat. No.
PL73
Prismatic Lens
SL73 - Spread Lens: Creates an oval beam pattern, more narrow in
one beam axis. Best with spot lamps. Inserts behind lens into lens gasket.
Cannot be used in combination with HL73 hex cell louver.
Cat. No.
SL73
Spread Lens
© 2005 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
5627305335
Scarab 6730
TM
Die-Cast Aluminum, PAR30 Metal Halide
revision12/01/05 • 6730.pdf
Type:
Job:
Page: 3 of 7
Fixture Options
Ordered Separately from Fixture
Aluminum
Adjustable Glare Shield
Cat. No.
Finish
AGS73BL Black
AGS73DB Dark Bronze
AGS73GR Verde Green
No Option
Spun aluminum shield with 45° cut and drain hole. Includes
die-cast, low copper (<0.6% Cu) aluminum lens ring. The
shield is rotatable 360°. Replaces standard lens ring/hood
on fixture.
Aluminum
Full Glare Shield
Cat. No.
Finish
FGS73BL Black
FGS73DB Dark Bronze
FGS73GR Verde Green
No Option
Spun aluminum shield with drain hole. Includes die-cast,
low copper (<0.6% Cu) aluminum lens ring. Replaces
standard lens ring/hood on fixture.
Debris Screen
Cat. No.
Finish
DS73
Black
No Option
Stainless steel wire screen welded to flange, and held in
place with spring clips. Screen inserts inside full glare shield
only. All debris screens are black iridite colored.
5A"
(128.6 mm)
4F" DIA.
(106.4 mm)
6D"
(168.3 mm)
4A" DIA.
(103.2 mm)
31.5° cutoff
4
© 2005 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
5627305335
Scarab 6730
TM
Die-Cast Aluminum, PAR30 Metal Halide
revision12/01/05 • 6730.pdf
Type:
Job:
Page: 4 of 7
Remote Mounting Options
Ordered Separately from Fixture
PowerPost™ by
Engineered Products Co.
Cat. No.
EP17
No Option
Architectural Junction Box
Cat. No.
Finish
JB1/BL
Black
JB1/DB
Dark Bronze
JB1/GR
Verde Green
No Option
PVC fixture molded in black with K" NPT mount is corrosion
free and UV resistant. Replaces EMT, conduit connectors and
weatherproof boxes. 100% shatter resistant against denting
and cracking. Angled bottom to eliminate cable congestion.
17K" post length.
CAUTION: EP17 should be used with a UL Listed fixture
and grounding means (i.e., third wire) suitable for use in
wet locations.
“x” = required depth of conduit per local code.
NOTE: Maximum remote mounting distance for 35PMH
and 70PMH fixtures is 50'.
3J" DIA.
(82.6 mm)
K" NPT
Fixture
Mount
2J"
(57.2 mm)
1"
(25.4 mm)
17K"
(444.5 mm)
3K"
(88.9 mm)
Rigid
Conduit
(by others)
Die-cast, low copper (<0.6% Cu) aluminum with K" NPSM
fixture mount. Internal set screw provided for locking
position. Two K" NPSM in bottom, 17 cu in. internal volume.
Super TGIC powder coat paint over clear anodizing and
titanated zirconium conversion.
Application Notes
• Elevates accent lights above ground cover to prevent
foliage from blocking the light.
• Elevates path lights above ground cover to achieve a
greater light throw.
CAUTION: Junction box must be installed high enough to
avoid contact with soil or standing water.
When installed on a single “feed” conduit, provide additional
24" long stablizer pipe with cap. Installation on single conduit
not recommended.
© 2005 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
3"
x
5"
(127.0 mm)
DIA.
(76.2 mm)
K" NPSM
Fixture
Mount
4L"
(120.7 mm)
5627305335
Scarab 6730
TM
Die-Cast Aluminum, PAR30 Metal Halide
revision12/01/05 • 6730.pdf
Type:
Job:
Page: 5 of 7
Remote Mounting Options
Ordered Separately from Fixture
Brass In-grade
Architectural Junction Box
Cat. No.
JBR-2
JBR-3
JBR-21
JBR-24
No Option
Die-cast brass with K" NPSM fixture mount and
die-cast cover. Internal set screw provided for locking
position. 18 cu. in. internal volume.
JBR-2 (2) K" NPT in bottom
JBR-3 (2) L" NPT in bottom
JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom
JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom
All side taps provided with plugs.
25 Year Limited Warranty:
Solid brass junction boxes are warranted for 25 years, from
date of sale, against manufacturing defects and failure due
to corrosion.
Application Notes
• Utilizing conveniently located ballast box, fixtures can be
remote mounted.
• Cast brass slowly adopts environmental “patina” adapting
itself to the landscape.
• May be cast in concrete for increased stability.
CAUTION: Fixture stem and swivel must not contact soil or
standing water. Provide drainage away from junction box.
Lamp and ballast must be of equal wattage. Ballast box must
be installed high enough to encourage water drainage away
from the housing.
NOTE: Maximum remote mounting distance for 35PMH and
70PMH fixtures is 50'.
3L" DIA.
(95.3 mm)
K" NPSM
Fixture
Mount
© 2005 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
K"
(12.7 mm)
3"
(76.2 mm)
5627305335
Scarab 6730
TM
Die-Cast Aluminum, PAR30 Metal Halide
revision12/01/05 • 6730.pdf
Type:
Job:
Page: 6 of 7
Remote Mounting Options
Ordered Separately from Fixture
Brass In-grade Staked
Junction Box
Cat. No.
JBR30
No Option
Stanchion Mount
Cat. No.
Finish
SM18/BL Black
SM18/DB Dark Bronze
SM18/GR Verde Green
No Option
Die-cast brass with K" NPSM fixture mount and die-cast
cover. Internal set screw provided for locking position.
18 cu in. internal volume.
(2) K" NPT in bottom with (2) 19" long stakes.
3L" DIA.
25 Year Limited Warranty:
(95.3 mm)
Solid brass junction boxes are warranted for 25 years, from
date of sale, against manufacturing defects and failure due
to corrosion.
Application Notes
• Utilizing conveniently located ballast box, fixtures can be
19C"
(492.1 mm)
remote mounted.
• Cast brass slowly adopts environmental “patina” adapting
itself to the landscape.
• May be cast in concrete for increased stability.
CAUTION: Fixture stem and swivel must not contact soil or
standing water. Provide drainage away from junction box.
Lamp and ballast must be of equal wattage. Ballast box must
be installed high enough to encourage water drainage away
from the housing.
NOTE: Maximum remote mounting distance for 35PMH
and 70PMH fixtures is 50'.
K" NPSM
Fixture Mount
3K"
(88.9 mm)
18D"
(473.1 mm)
3" O.D. by .188" wall cast, low copper (<0.6% Cu)
aluminum with K" NPSM fixture mount and hand hole with K" NPSM
flush cover. Internal set screw fixture lock accessible Fixture Mount
through hand hole. Internal ground lug supplied with
6" Min. (152.4 mm)
installed lead. Super TGIC powder coat paint over clear
12" Max. (304.8 mm)
anodizing and titanated zirconium conversion.
Optional
Concrete
(by others)
© 2005 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
1"
(25.4 mm)
3" DIA.
(76.2 mm)
18"
(457.2 mm)
Rigid
Conduit
(by others)
5627305335
Scarab 6730
TM
Die-Cast Aluminum, PAR30 Metal Halide
revision12/01/05 • 6730.pdf
Type:
Job:
Page: 7 of 7
Remote Mounting Options
Ordered Separately from Fixture
Surface Mount
Cat. No.
Finish
J-27N/BL Black
J-27N/DB Dark Bronze
J-27N/GR Verde Green
No Option
Cast, low copper (<0.6% Cu) aluminum with K" NPSM
fixture mount. Internal set screw provided for locking
position. 5 cu in. internal volume. Super TGIC powder coat
paint over clear anodizing and titanated zirconium
conversion.
Application Notes
• Utilizing conveniently located ballast box, fixtures can be
Surface mounted.
CAUTION: Lamp and ballast must be of equal wattage.
Ballast box must be installed high enough to encourage
water drainage away from the housing.
NOTE: Maximum remote mounting distance for 35PMH
and 70PMH fixtures is 50'.
© 2005 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
2F"
(55.6 mm)
4K"
(114.3 mm)
1L"
(44.5 mm)
K" NPSM
Fixture
Mount
5627305335