USGG-RF
LED FIXTURES
34
RECESSED FIXTURE
Application
This static troffer fixture is designed for quick installation into “T”
bar ceiling grids. Its suitable for use in all office, commercial, and
industrial areas that use a T bar grid. There are a wide variety of
options available for customizing this fixture to your specific needs.
Construction
The housing for the RF fixture is die formed from heavy gauge
steel, and is finished in a baked white enamel, or post powder
coating for maximum reflectivity and durability. Hinged door frame
with mitered corners comes with swivel motion cam latches for
easy access into the fixture interior for re-lamping or maintenance.
Standard lens is prismatic acrylic pattern 12, which provides uniform light distribution.
Electrical
This fixture meets or exceed all requirements for UL Luminairic
Standard #1598, and UL Sub#8750. In addition, the RF fixture
complies with National Energy Standards.
Mounting
All units are stamped with 7/8” knock-out in the top, sides and
includes access plates. For additional safety, this fixture has “earthquake clips” integrated in the housing.
Specifications
HOUSING
# LAMPS
VOLTAGE
OPTIONS
RF 22
2= Two
UNV
RF 24
3= Three
A15 = Prismatic Acrylic Lens .156
4= Four
PC = Polycarbonate Lens .125
A12 = Prismatic Acrylic Lens .125
WG = 11 Gauge Wire Guard
FP = Flange Pan Drop Dish
SIL = 1/2” Silver Parabolic
SIL2 = 3/4” Silver Parabolic
SIL3 = 1 1/2” Silver Parabolic
REF = Reflector (86%,92%, or 95% Reflective)
FLG = Flanged for Plaster Ceiling
NYC = 20 Gauge NYC Housing Consult Factory for Options