POWER CORD INQUIRY Power Comoponents Division "A" Overall Length "C" Other End "B" Plug End "D" Cordage Type 1. "A" OVERALL LENGTH: _____________________ 2. "B" PLUG END - Specify the male or female type _______________________ Where no plug is required, furnish the following information: Blunt Cut Remove Outer Jacket (ROJ): ____________" Length of Conductors from Jacket: ______________" Black (Brown) ____________", Green (Green / Yellow) _____________", White (Blue) ____________" Strip Conductors: ____________" Black (Brown) ____________", Green (Green / Yellow) _____________", White (Blue) ____________" Image Field Tin Conductor Twist Conductor Terminals Required (Attach drawing or sketch with terminal part numbers.) 3. "C" OTHER END - Specify the type of connector _______________________ Where no connector is required, furnish the following information: Blunt Cut Remove Outer Jacket (ROJ): ____________" Length of Conductors from Jacket: ______________" Black (Brown) ____________", Green (Green / Yellow) _____________", White (Blue) ____________" Strip Conductors: ____________" Black (Brown) ____________", Green (Green / Yellow) _____________", White (Blue) ____________" Twist Conductor Tin Conductor Terminals Required (Attach drawing or sketch with terminal part numbers.) 3. "D" CORDAGE a) Wire Gauge (AWG)/MM2 ): __________20, 18, 16, 14, 12 (0.75mm 2, 1.00mm 2, 1.50mm 2, 2.0mm2) b) Number of Conductors: __________2, 3 c) Cordage Type: __________SPT-1, SPT-2, SPT-3, SVT, SJT, HPN, (H03VVH2-F, H03VV-F, H05VV-F, H05RN-F, H05RR-F, H07RN-F, VCTF) Other: _______________ d) Amp Rating: _______________ Voltage: _______________ e) Temperature Rating: _______________ 60°C, 70°C, 90°C, 105°C, Other: _______________ f) Conductor Code: _______________ North American, CEE International North American - (Line / Black, Neutral / White, Ground / Green) CEE (International) - (Line / Brown, Neutral / Blue, Ground / Green-Yellow) g) Jacket Color: _______________(Black, Gray, Special) h) Shielding: _______________ None, Mylar Foil 5. PACKAGING: Bulk 6. DRAWING ATTACHED: Coiled Twist Tie Hank Yes Other____________ No 7. QUANTITY PER YEAR: _______________________ Thank you for your inquiry, we will process your request promptly ... Qualtek Electronics ..... Meeting Global Demands with Design Solutions. 7610 Jenther Drive Mentor, Ohio 44060 PHONE: 1-440-951-3300 FAX: 1-440-951-7252 Web: http://www.Qualtekusa.com E-Mail: mailbox@qualtekusa.com Print Form Submit by Email Reset Form Form 7209