Power Monitoring
Metering Updates
Presented by: Richard Utrup
1
Confidential Property of Schneider Electric
Comprehensive Hardware Portfolio
Simple
ENERGY & POWER MANAGEMENT
Expert
Single Circuit
EM4200 Enercept
EM3500
PM5100
PM5300
PM5500
PM8000
ION7X50
CM4000T
ION8650
Multi-Circuit
EM4800
BCPM
BCPME
MPM
Gateways & Energy Servers
EGX 100
Com’x 200
2
EGX 300
2
2
Application-based positioning
Simplifies selection of meters
Confidential Property of Schneider Electric
PM5000
PM8000
3
PM2xx
COST management
Save money on your electric bill
Basic I/O
BASIC
Panel Meter Upgrade
PM7xx
PM5xxx
ION7300
ION7330
NETWORK management
ION7350
Provide information to ensure that the electrical
distribution network maintains reliability
ASSET management
Extended I/O
ADVANCED
INTERMEDIATE
PM810/820
PM850/870
CM3xxx
CM4xxx
Ensure expensive equipment is maintained
and working reliably
PM8xxx
ION7550
PM9000
Future availability
ION7650
Confidential Property of Schneider Electric
4
Introducing PM8000
Simplifying power quality,
maximizing versatility
Confidential Property of Schneider Electric
5
Measure, understand, and act on insightful data
gathered from your power system
> Make power quality easy to understand
> Unify metering and logging of all utilities
> Make data fast to access and act on
> Adapt your application over time with ease
The PowerLogic PM8000 series
meter has the versatility to perform
just about every job you need it to do,
wherever you need it!
Confidential Property of Schneider Electric
6
Reveal and understand complex
power quality conditions
> Dip & swell detection
> Waveform capture
> Disturbance direction detection
> Trending & forecasting
> Compliant PQ standards:
> IEC 61000-4-30 PQI-S
> IEC 62586
> EN 50160
Confidential Property of Schneider Electric
7
Improve power
availability & reliability
by detecting issues
before they become a
problem
> Monitor harmonic levels in distribution
equipment to mitigate excessive heating
and premature failure of transformers due
to high harmonics
> Use trending and alarming to detect an
increase in the current pull of critical
motors, indicating worn bearings that will
lead to motor failure
> Utilize millisecond event time stamping to
analyze the sequence of events and
determine the root cause of outages and
minimize down time
Confidential Property of Schneider Electric
8
Analyze electrical
faults & disturbances
in your electrical
distribution system to
help identify root cause
Confidential Property of Schneider Electric
> Disturbance direction detection helps you
determine the source of a disturbance by
indicating whether it originated upstream or
downstream of the meter
> Analyze your electrical system as per
EN 50160 to identify power quality issues such
as frequency inconsistency, voltage fluctuations
and unbalance, and harmonic contribution
9
Sag/swell monitoring with disturbance
direction detection
Use multiple meters to
determine the general
location of the disturbance
If the meter is on the building
main incomer, it determines if
the disturbance occurred
within the building or from the
utility
Confidential Property of Schneider Electric
10
Gather and act on energy and consumption data
> Precise, consistent metering
> Real energy - Class 0.2S (IEC 62053-22, ANSI
C12.20 (0.2) Class 10)
> Reactive energy - Class 0.5S (IEC 62053-24)
> Measurement method - IEC 61557-12 PMD-S
> Billing flexibility
> Supports Time Of Use metering
(4 seasons, 5 day types, 20 year calendar)
> Utility sealable
Confidential Property of Schneider Electric
> Time synchronization
> WAGES metering support (input metering) 11
Improve financial
performance through
energy usage and cost
optimization
> Allocate energy costs between different
departments, phases of the industrial
process or cost centers
> Account for complete energy costs,
including water, air, gas, electricity, and
steam (WAGES) using input metering
> Measure electrical consumption for specific
time periods, including on peak, off peak,
and holidays, with the meter’s Time of Use
calendar
Confidential Property of Schneider Electric
12
Input metering for “advanced” WAGES monitoring
> PowerLogic PM8000 series meter is configured
for input metering
> Digital inputs connected to pulse counting devices
(gas meters, water meters, etc) for local display
> Ethernet gateway and connection to StruxureWareTM
Power Monitoring Expert software allow for remote
monitoring
StruxureWare Power Monitoring Expert software
displays the information as if connected directly
to water meters, gas meters, etc.
Confidential Property of Schneider Electric
13
Sustain the value of your investment
ION™ technology, modular I/O
options, and downloadable
firmware offer unique flexibility to
meet your needs today and adapt
to changing requirements tomorrow
Confidential Property of Schneider Electric
14
Versatility to meet
your needs today…
DIN rail-mount meter with remote display
Multiple mounting options:
• Panel meter with integrated display
• DIN rail meter with remote display
Panel-mount meter
with 2 I/O modules
Multiple communication options:
•
•
•
•
•
Modbus, DNP3, and IEC 61850 protocols
RS-485 serial port
Dual-port Ethernet ports
Ethernet-to-serial gateway
Modbus Master functionality
Confidential Property of Schneider Electric
Panel-mount meter
bottom (note dual-port
Ethernet connection)
15
…and adapt to your future needs tomorrow
> ION technology is modular, powerful, and
flexible . . .
> Based on a simple “building block” approach
> Uniquely addresses advanced monitoring
and control applications
> Adapts to changing needs
Confidential Property of Schneider Electric
16
Offer summary and part numbers
PM8240
METSEPM8240
PM8243
METSEPM8243
PM89RD96
• Class 0.2S meter, dual Ethernet, load profile,
ION technology, extendable I/O, Power quality
features, panel mount with Integrated display
• Class 0.2S meter, dual Ethernet, load profile,
ION technology, extendable I/O, Power quality
features, DIN rail mount with no display
• Color remote display
METSEPM89RD96
PM8244
METSEPM8244
Confidential Property of Schneider Electric
• DIN rail mount meter + remote display
combined in one package
17
Meter at a glance (front)
Panel mount meter
2
DIN-rail mount meter
3
4
4
3
1
2
1
6
1. Voltage inputs
2. Control power
3. Digital inputs
4. Digital output
5. Alarm LED
6. Status LED
6
Confidential Property of Schneider Electric
5
18
Meters at a glance (bottom)
Panel mount meter
5
DIN-rail mount meter
1
1
5
2
3
4
Confidential Property of Schneider Electric
2
1. Dual-port Ethernet
2. RS-485
3. Current inputs
4. Mounting clips
5. Expansion port
3
4
19
Summary of compliant standards
> IEC 61557-12 PMD-S
> IEC 62586
> IEC 62053-22 Class 0.2S
> IEC 62053-24 Class 0.5S
> IEC 61000-4-30 Class S
> ANSI 12.20 Class 0.2 (accuracy)
Confidential Property of Schneider Electric
> CE as per IEC 61010
> UL - C & US as per UL 61010
> C-tick
> FCC Part 15, Class B
> Green premium
20
PM 800 Comparison to PM8000
21
PM800 to PM8000
Feature
PM8xx
PM8000
Voltage Input
35 – 600 Vac L-L
50, 60, 400 Hz
90 – 690/600 Vac L-L
50, 60, 400 Hz
Sample Rate
128 samples / cycle
256 samples/cycle
115 – 415 Vac, 15VA
125 – 250 Vdc, 10W
100 – 415 Vac
100 – 240 Vdc
0.08 MB, 0.8 MB
512 MB (10.0 MB for Frameworks)
1 D/I (not wetted), KYZ
3 D/I (not wetted), KY
Control Power
Memory
I/O
Modularity
Frameworks
Field installable options (x2):
• 2 D/I / 2 Relay Output
• 6 D/I / 2 Relay Output
• 2 D/I / 2 Relay Output / 2 Analog Input / 2 Analog Output
• Ethernet comms, web server, gateway
• Remote display
Field installable options (x4)
• 6 D/I (w) / 2 Relay Output
• 4 Analog Input / 2 Analog Output
• Remote display
No
Yes
Time Synchronization
DCF77(via Digital Input)
SNTP
Software command
IRIG-B (unmodulated – dig In)
NTP/ SNTP
Software command
Display
6-Line Monochrome LCD
3.5” Color TFT
92 x 92 x 70 mm Panel or DIN rail
Option modules = 20 mm (each)
92 x 92 x 78 mm Panel or DIN
Option modules: 22 mm (each)
English, French, Spanish, German, Portuguese
English, French, Spanish, Chinese, Italian, German, Russian,
Portuguese
10/100BaseTX (x1) - ModbusTCP, MBTCP filtering
2x RS-485 - Modbus RTU, Modbus ASCII, SYMAX
10/100BaseTX (x2) - Modbus, DNP3, IEC61850
1x RS-485 – Modbus, DNP3
Mounting
Language Support
Communications
Confidential Property of Schneider Electric
22
ION 7330 and ION 7350 Announcement
23
Withdrawal: ION7300 family
> All ION73x0 meters are being withdrawn
> All brand versions
> All order options
> All ION73x0 accessories such as remote displays
PM73x0
PM8000
> End of commercialization: December 31st, 2015
> Components are no longer available
> Anticipate selling the last meters in December 2015
Now is the time to begin the
transition to PM8000
> Repairs until 2020 or no components available
> Will continue to be supported in power monitoring software
> Tech support will continue indefinitely
> A limited reserve stock will be maintained for replacements
Confidential Property of Schneider Electric
24
ION 73x0 to PM8000 substitution – key differences
Feature
ION7330(7350)
PM8000
Voltage Input
87 - 600Vac L-L; 50 or 60 Hz
90 – 690 Vac L-L; 50, 60, 400 Hz
Sample Rate
32(64) samples/cycle
256 samples/cycle
Control Power
95 – 240Vac; 120 – 310 Vdc
100 – 415 Vac; 100 – 240 Vdc
Memory
0.3 MB
512 MB (10.0 MB for Frameworks)
I/O
4 dig In (wetted), 4 dig Out
3 dig In (not wetted), KY, (Modular I/O available)
Modularity
Factory options:
• 4 analog In / 4 Out (0-1mA, or 0-20mA)
• Modem, Fiber Ethernet
• 20 – 60Vdc control power (not CE marked)
• Remote display
Field installable options (up to 4 modules):
• 6 dig In (wetted) / 2 relay Out
• 4 analog In / 2 Out (4-20mA)
Frameworks
Yes
Yes
Time Synchronization
GPS (via RS232); Software command
IRIG-B (unmodulated – dig In); NTP/ SNTP; GPS (via RS485); Software command
Display
4 line monochrome LCD
3.5” color TFT
Mounting
92 x 92 x 162 mm panel, DIN or pan mount
92 x 92 x 78 mm panel or DIN
Option modules: 22 mm (each)
Language Support
English
English, French, Spanish, Chinese, Italian, German, Russian, Portuguese
Communications
10BaseT (x1) - Modbus TCP / ION over IP
2x RS485 - Modbus RTU, ION, DNP3
ANSI C12.19 Optical port
10/100BaseTX (x2) - Modbus, ION, DNP3, IEC61850
1x RS485 – Modbus, ION, DNP3
Schneider Electric
- Division - Name – Date
• Remote display
25
Introducing PM5000
Simplifying energy management,
maximizing versatility
Confidential Property of Schneider Electric
Schneider Electric
- Division - Name – Date
26
26
The PM5000 series
Unique, specifiable features unheard of at this level
On the Outside:
On the Inside:
• Removable Connectors with
Labels
• Mounts without Tools
• Small Footprint (92 x 92mm)
• Direct Connect up to 600V L-L
• Flexible DIs and DOs without
Optional Modules
• Dual Ethernet (one IP Address)
• Integrated Display (or Remote)
• 4th CT Input
• Class 0.5 (or 0.2) Accuracy
• Four-Quadrant Metering
• Individual Harmonic Magnitudes
and Angles (up to 63rd)
• Real-Time Clock with One-Year
Ride Through
• Onboard logging
• Multiple Tariffs
• Web Pages to Visualize Real-Time
Data without Software Tool
• Provides Gateway Functionality
Seamless Integration
with StruxureWare
Schneider Electric
See catalog for features by model
Some features available Q1 2015
27
PM5000 – basic range meters
Key Feature (1)
PM5110
PM5330
PM5340
■
■
■
PM5560
PM5563(RD)
Accuracy
0.5 Class
■
0.2 Class
■
Display
Integrated
■
■
■
■
Remote
(Option)
Comms
Serial
1
1
1
1
2
2
Web Server
■
■
Gateway
■
■
Ethernet
1
Web
I/O
Digital Inputs
0
2
2
4
4
Digital Outputs
1
2
2
2
2
Confidential Property of Schneider Electric
(1) See brochure for additional feature differences in I/O, Alarms, Tariffs, and Power Quality
28
PM5560/5563 new model and features
PM5560
PM5563
Confidential Property of Schneider Electric
No display port
Firmware upgrade
Hardware upgrade
Gateway w/ cyber security
PM5563
PM5563RD
PM5RD
29
PowerLogic meter comparison:
PM750 versus PM5300 models
PM750
PM5300 models
Energy accuracy
0.5%
0.5%
MID compliance
No
Yes (specific models)
Multiple tariffs
No
4 tariffs
THD – V&I per phase
Individual up to 31st
THD – V&I per phase
15
35
RS-485
RS-485 or Ethernet
1DO, 2DI
2DO, 2DI, 2 relay
Logging
No
2 parameters (kWh & kVAh) for 60 days
@ 15 minutes
Battery backed real-time clock
No
Yes
Voltage inputs
10 – 480 V L-L ac
35-690 V ac CATIII*
*UL up to 600V ac
Control power
110 – 415 V ac
125 – 250 V dc
90 – 456 V ac
100 – 300 V dc
Harmonics
Alarms
Communications
I/O
Confidential Property of Schneider Electric
30
PowerLogic meter comparison:
PM820 versus PM5500 models
PM820
PM5500 models
Energy accuracy
0.5%
0.2%
MID compliance
No
Yes (specific model)
Multiple tariffs
No
8 tariffs
Individual up to 31st,
THD – V&I per ph
Individual up to 63rd,
THD – V&I per ph
45
52
RS-485 and Ethernet (external module)
RS-485 and Ethernet (onboard)
Std - 1 DI & 1 DO
Opt - 12 DI, 4 DO, 4 AI, 4 AO
4DI, 2DO
Up to 5000 records with up to 14 parameters
each
Up to 14 selectable parameters with configurable interval
& duration (e.g., 6 parameters for 90 days @15 minutes
interval)
Yes
Yes
Voltage inputs
10 – 600 V L-L ac
35-690 V ac CATIII*
*UL up to 600V ac
Control power
110 – 415 V ac
125 – 250 V dc
90 – 528 V ac
100 – 300 V dc
Harmonics
Alarms
Communications
I/O
Logging
Battery backed real-time clock
Confidential Property of Schneider Electric
31
PM5560/5563 cyber security
> Enhanced protection against tampering, hacking, and unauthorized access to the meter,
improving customers’ information security and ensuring business continuity.
> Availability – information is available when it is needed
> Integrity – data cannot be modified without authorization
> Confidentiality – prevent disclosure of private information
> Mitigate potential risks:
> Safety of personnel
> Production and financial loss
> Loss of sensitive data
> PM55xx features include:
> Device hardening support – ability to lock down Ethernet and serial interfaces, HMI interfaces, and
individual port access
> Secure coding – discovery and elimination of security flaws during firmware development and testing
> Information input validation – verification that inputs match pre-defined format and content
Confidential Property of Schneider Electric
32
Meter insights
Unique feature available on all PM5000 versions
Step 1
Step 2
Step 3
Navigate to the screen with
the meter’s dynamically
generated QR code
Scan the QR code with
any scanning app on a
smart device
Receive augmented metering information, such as
basic analytics and richer data presentation
(graphical log view), that you can save to the cloud
33
for future access on any platform
Confidential Property of Schneider Electric
New Enercept
EM4200
Confidential Property of Schneider Electric
34
The Original
> Created in 1998
Confidential Property of Schneider Electric
35
What’s New?
>
>
>
>
>
>
>
>
>
>
ModBus & BACnet on a single meter
Use any .3V or Rope CT with a range of 5A-5000A
Swizzle feature: Swap any CT phase or direction over Comms
Local Phase Status Indicators
ANSI .2% Accuracy
Bi-Directional or Unidirectional is auto detected
Legacy Mode: Uses Old Enercept Point Map (no new integration).
Input for neutral CT
Set-up with or without power using rotary dials or over Comms
Phase-Loss Alarm (NO Contact)
Confidential Property of Schneider Electric
36
Competitive Comparison
37
Shark Meter Brand Label Overview
Electro Industries
GE
Shark Series
100-V1
Features
Volts and Amps Meter
EPM Series
PL2200-A1
Difference
RS485 option only
IQ Series
IQ130
Difference
(Same as Shark)
Series
PM5000
100-V2
Volts, Amps, Power, and Frequency
PL2200-A2
RS485 option only
IQ140
(Same as Shark)
PM5000
100-V3
PL2200-A3
RS485 option only
IQ150
(Same as Shark)
PM5000
PL6000
RS485 standard, Ethernet option
PM5000
100-V4
Volts, Amps, Power, Frequency and Energy
Counters
Volts, Amps, Power, Frequency and Energy
Counters
Above with THD and Limits
PL6000-THD RS485 standard, Ethernet option
PM5000
200-V1
Multimeter function only
PL7000-A
200-V2
Standard Data-Logging Memory
IQ250 - A
200-V2
Standard Data-Logging Memory
IQ250 - L
200-V3
Power Quality Harmonics
IQ260 - A
200-V3
Power Quality Harmonics
200-V2
Standard Data-Logging Memory
PL7000-B
200-V3
Power Quality Harmonics
200-V4
100-V3
Eaton
(Same as Shark)
Schneider
n/a
PM5000
Logging disabled, Ethernet not
available
Ethernet not available
PM5000
PM5000
IQ260 - L
Logging disabled, Ethernet not
available
Ethernet not available
(Same as Shark)
IQ2250
(Same as Shark)
PM5000
PL7000-C
(Same as Shark)
IQ2260
(Same as Shark)
PM5000
Limits and Control
PL7000-D
(Same as Shark)
IQ2270
(Same as Shark)
PM5000
200-V5
64 Samples/Cycle Waveform Recording
PL7000-E
(Same as Shark)
IQ2280
(Same as Shark)
PM8000
200-V6
512 Samples/Cycle Waveform Recording
PL7000-F
(Same as Shark)
IQ2290
(Same as Shark)
PM8000
PM5000
PM5000
Many of the Eaton and GE brand meters are identical to Shark. In some cases they chose to limit options or provide options as standard.
Confidential Property of Schneider Electric
38
Shark Meter Substitution Guide
100 Level Guidance
• Provide PM5110 for most applications
• If Ethernet required then substitute PM5340
• If 0.2% required then substitute PM5560 or 5563 ($)
• If transducer required then substitute PM5560 ($)
100 Level Gaps
• Front panel IrDA
• DNP 3.0 over serial
• Low voltage DC control power
200 Level Guidance
V1 - V3
• Substitute PM5560 or PM8240 (PM5563 or PM8243 if
transducer)
• Substitute PM8000 if Analog I/O required
• Substitute PM8000 if IEC61850 required*
V4 - V6
• Substitute PM8240 (PM8243 if transducer)
200 Level Gaps
• Front panel IrDA
• DNP 3.0 over serial
• Low voltage DC control power
• Fiber optic
*IEC61850 Ethernet card not offered by Eaton
Confidential Property of Schneider Electric
39
Enclosures
40
New enclosure product line in 2015
> Meter transition driving
enclosure re-design
Enclosure Type
Existing Enclosures
New Enclosures 2015
Industrial
PM810, PM820
PM5563RD
PM850, PM870
PM8244
ION 7330, ION 7350
x
ION 7330, ION 7350 RMD
x
820
PM5563RD
PM850, PM870
PM8244
PM820 (Feeder)
PM5563RD
> Streamlined offer: 3 enclosure
types x 2 meter choices
> Ethernet and serial
communications now standard
Commercial
> Lower pricing due to new
meters
Main and
Feeder
Available now!
PM8244
Industrial
Confidential Property of Schneider Electric
Commercial
Main and feeder
41
Gateways and Energy Servers
42
Schneider Electric’s Communications Advantage
•
•
•
•
•
Most flexible system architecture with powerful communications options
Web server simplifies IP address management and device commissioning
Complete set of standard web pages plus the ability to create custom pages
Compliments industry’s most comprehensive software portfolio
Available in factory assembled enclosures
Current
Offer
EGX-300
COM’X-200
EGX-100
Web-enabled
gateway/server
Energy server/
smart data logger
Serial to Ethernet
Gateway
• Requires only a web browser
and Ethernet network
• Log and display real-time data
and trend plots
• Up to 64 devices
• Modbus port, digital and
analog inputs for WAGES
• USB, GSM/GPRS, WiFi
• Dual Ethernet eliminates the
need for a switch or hub
• Provides complete access to
all measurements and status
information via Ethernet
• Up to 32 devices
43
Gateways and Energy Servers
Highlights
Transition End of 2015
LOCAL ENERGY SERVER
 Logging for non-logging devices
 Entry level energy management in a box
 Local data logging and visualization
 No software to install – uses a web browser
EGX-300
Com’X 510
MODBUS GATEWAY
 Modbus serial to Modbus TCP gateway
 Performance gateway for PME/PSE
Link 150
EGX-100
Com’X 200
Confidential Property of Schneider Electric
 Dual Ethernet
 DNS support
 IP V6 Support
 RSTP support for loops
 DPWS configuration
 Com’X 200 = 100-230 AC
 Com’X 210 = No AC Power,
will accept I/O extension
modules
CLOUD ENERGY SERVER
 Data logging pushed to the cloud
 Remote service platform connectivity
 Wireless connectivity to cloud
 Box for hosted platforms
 Smart panels / connected panels
 Dual Ethernet
 Increased storage
 Wireless: WiFi / GPRS / 3G
 Better EMC rating
 On-board 6 DI, 2 AI
Com’X 200
Com’X 210
44
Power Monitoring Software
45
Our Value Propositions for Data Centers
Intelligent &
comprehensive insight into
the power distribution
system: From Utility Feed
to the IT Rack
Decrease the number and
duration of unplanned outages
Manage power capacity and
redundancy
Generators
Improve power distribution
efficiency
Critical Power Path
Support cost allocation
and billing from main to rack
Improve the effectiveness
of maintenance activities
Substation
Confidential Property of Schneider Electric
MV + LV Power
Distribution
46
Our Value Propositions for Hospitals
> Generator monthly test report (EPSS)
> Compliance with NFPA 99 &110, IEC60364-7-710, CSA Z22282 standards
> Check power recovery performance
> Get summary of generator and ATS performance
> Generator load summary report
> Ensure generators run under adequate load
to maximize reliability
Generator monthly test (EPSS)
Generator activity
> Generator activity report
> Comply with EPA and similar standards
> To facilitate the predictive maintenance based on running time
> Generator battery health report
> Identify when the batteries need replacing
> Generator capacity report
Confidential Property of Schneider Electric
Generator
battery health
Generator Capacity report
> Verify redundancy performance as loads evolve
47
Our Value Propositions for
Buildings
 Ensure electrical system health
 Increase operational efficiency
 Gain energy insight
 Improve energy accountability
48
©2014 Schneider Electric. All Rights Reserved.
All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies or their respective owners.
49