DD Cut Sheets, 5-13-13 - Christenson Corporation

!"# ! $%& ' "#() *" %' +", - .!#,/-+-), " Design Development Submittal Mechanical Equipment Cut Sheets Printed Date: 5/10/2013 Job: Job 2013-04-18 9305 Mark: EF-1 Inline Discharge Inlet Belt Drive Centrifugal Inline Fan Standard Construction Features: - Galvanized steel housing - Backward inclined aluminum wheel - Two bolted access panels - Integral duct connection flanges - Ball bearing motors Adjustable motor pulley - Adjustable motor plate - Fan shaft mounted in ball bearing pillow blocks - Static free belts - Corrosion resistant fasteners PLAN VIEW Options & Accessories: 12.5 Switch, NEMA-1, Toggle, Junction Box Mounted & Wired Inline Discharge BLOWER HOUSING 1.0 Inlet 19.875 23 Inlet 1.0 22 23 ELEVATION VIEW END VIEW Dimensional Qty 1 Weight w/o Accessories (lb) 108 Weight with Accessories (lb) 112 Performance Requested Volume (CFM) 2,525 Actual Volume (CFM) 2,525 External SP (in. wg) 0.6 Total SP (in. wg) 0.6 Fan RPM 1574 Motor Motor Mounted Size (hp) V/C/P Encl. Motor RPM Yes 1 460/60/3 ODP 1725 NEC Windings FLA* (Amps) 1 2.1 Operating Power (hp) 0.73 Elevation (ft) 4,555 Airstream Temperature (F) 70 Drive Loss (%) 7.0 Tip Speed (ft/min) 6,026 SE (%) 35 Sound Power by Octave Band Sound Data Inlet Radiated 62.5 125 250 500 78 81 81 82 83 79 78 72 1000 2000 4000 8000 LwA 70 62 68 53 65 47 59 43 79 74 dBA Sones 68 62 16.0 11.3 Notes: All dimensions shown are in units of in.. *FLA - based on tables 150 or 148 of National Electrical Code 2002. Actual motor FLA may vary, for sizing thermal overload, consult factory. LwA - A weighted sound power level, based on ANSI S1.4 dBA - A weighed sound pressure level, based on 11.5 dB attenuation per Octave band at 5.0 ft - dBA levels are not licensed by AMCA International Sones - calculated using AMCA 301 at 5.0 ft CAPS 4.11.1396 C:\Users\comm-jep\Documents\CAPS\Jobs\Job 2013-04-18 9305.gfcj Page 1 of 2 Printed Date: 5/10/2013 Job: Job 2013-04-18 9305 Mark: EF-1 AMCA Licensed for Sound and Air Performance. Power rating (BHP/kW) includes transmission losses. Greenheck Fan Corporation certifies that the model shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (BHP/kW) includes transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The inlet sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type B: free inlet hemispherical sone levels. dBA levels are not licensed by AMCA International. The AMCA Certified Ratings Seal applies to inlet sone ratings only. Radiated (casing) sound data is the sound generated through the fan housing when the fan is ducted on both the inlet and outlet. CAPS 4.11.1396 C:\Users\comm-jep\Documents\CAPS\Jobs\Job 2013-04-18 9305.gfcj Page 2 of 2 AESV-1.0 06-17-11 AESV Single Duct Terminal Unit Analog Control, Pressure Independent Control Enclosure (Optional on Cooling-Only units) W L M G F 12 1/4" H D Slip & Drive Cleat Connection F 6 1/2" 18" Right hand unit shown. All dimensions are in inches. Inlet Size CFM Range D F G H L M W 4 0-225 3 7/8 2 1/8 7 3/8 8 15 1/2 5 3/8 12 5 0-350 7 4 /8 1 2 /8 3 7 /8 8 15 /2 5 3/8 12 6 0-500 5 7/8 2 1/8 7 3/8 8 15 1/2 3 3/8 12 7 0-650 6 7/8 1 1/8 7 3/8 10 15 1/2 3 3/8 12 8 0-900 7 7/8 1 1/8 7 3/8 10 15 1/2 3 3/8 12 7 3 3 1 1 1 9 0-1050 8 /8 - 5 /8 12 /2 15 /2 3 /8 14 10 0-1400 9 7/8 - 5 3/8 12 1/2 15 1/2 3 3/8 14 12 0-2000 11 7/8 - 5 3/8 15 15 1/2 3 3/8 16 14 0-3000 13 7/8 - 3 3/8 17 1/2 15 1/2 3 3/8 20 16 0-4000 15 7/8 - 3 3/8 18 15 1/2 3 3/8 24 1 3 15 3 38 24 x 16 0-8000 7 7 23 /8 x 15 /8 1 /8 5 /8 18 3 /8 Accessories (Optional) Check if provided. SteriLoc Liner 1” EcoShield Liner Hanger Brackets 24 V Control Transformer UltraLoc Liner ½” EcoShield Liner (Foil Face) Removable Air Flow Sensor Dust Tight Enclosure Seal 1" Fiberglass Liner 1” EcoShield Liner (Foil Face) Bottom Access Door Fibre Free Liner ½” EcoShield Liner Disconnect Switch General Description Heavy gauge steel housing. Mechanically sealed and gasketed, leak resistant construction. Less than 2% of nominal cfm at 1.5" sp wg. Dual density internal insulation, treated to resist air erosion. Meets requirements of NFPA 90A and UL 181. Rectangular discharge opening is designed for slip and drive cleat duct connection. Multipoint center averaging inlet velocity sensor. Electronic proportional room thermostat with adjustable setpoints for temperature and airflow is included with unit. Minimum and maximum airflow adjustments are made at the thermostat, using a digital voltmeter. Choice of right hand or left hand control location. Electric damper actuator is an integral part of the unit. Model AESV can be installed horizontally, vertically, or at any angle. Operation is not affected by position. The control enclosure is optional and needs be ordered separately except for units with electric reheat. AESV-2.0 6-17-11 Accessories (Optional) Hot Water Coil Section 1 Row 2 Row 1/2" copper tubes Aluminum ripple fins, 10 per inch Connections: Single circuit, 1/2" O.D. male solder. Multi-circuit, 7/8" O.D., male solder. Coil is installed at discharge of unit. On units with attenuators, coil are installed at the discharge of attenuator. 3 Row 4 Row Optional SCR Controlled Electric Heater Electric Coil Section Options Standard Features Single side access to low voltage, high voltage, and electric heater controls. Automatic reset thermal cutouts, one per element Manual reset secondary protection. Positive pressure flow switch Magnetic contactor for each step. Slip and drive cleat discharge duct connection. Supply Voltage Fuse Block 208V, 1 ph, 60Hz Disconnect switch, door interlock type 240V, 1 ph, 60Hz 277V, 1 ph, 60Hz Dust tight construction 208V, 3 ph, 60Hz 480V, 3 ph, 60Hz (4 wire wye standard) Mercury contactors 1 392 6 1/4 W 12 H 365 8 Integral Sound Attenuator 1 62 1 392 W 18 12 1/4 Inlet Size H W 4 8 5 Water Coil L (1-2 Row) L (3-4 Row) 12 5 7 1/4 8 12 5 7 1/4 6 8 12 5 7 1/4 7 10 12 5 7 1/4 8 10 12 5 7 1/4 9 1 12 /2 14 5 7 1/4 10 12 1/2 14 5 7 1/4 12 15 16 5 7 1/4 14 1 20 1 7 /2 9 3/4 1 17 /2 16 18 24 7 /2 9 3/4 24 x 16 18 38 5 7 1/4 H The total length of the AESV unit is the summation of the unit length (with or without attenuator) and the length of the optional water coil. This submittal is meant to demonstrate general dimensions of this product. The drawings are not meant to detail every aspect of the product. Drawings are not to scale. Titus ® reserves the right to make changes without written notice. 605 Shiloh Road Plano, Texas 972-212-4800 All rights reserved. No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system without permission in writing from Air Distribution Technologies Design Development Submittal Plumbing Equipment Cut Sheets Plumbing Fixture P1 (),/7 #/2,/7 MOP SERVICE BASINS !2#()4%#452!, 30%#)&)#!4)/.3 HL-2100 HILOW CORLOW ® ® HL-1800 &2/.4 $2/0 7)4( 34!).,%33 34%%, #!0 MODEL HL-1800 HL-1900 HL-2000 HL-2100 SBC-1700 &2/.4 $2/0 7)4( 34!).,%33 34%%, #!0 !,, 3)$%3 SIZE 24”x24”x12” 32”x32”x12” 36”x36”x12” 36”x24”x12” MODEL HL-1810 HL-1910 HL-2010 HL-2110 SIZE 24”x24”x12” 32”x32”x12” 36”x36”x12” 36”x24”x12” &2/.4 $2/0 7)4( 34!).,%33 34%%, #!0 MODEL SBC-1700 SBC-1702• SBC-1725 SBC-1750 SIZE 24”x24”x12” 24”x24”x12” 32”x32”x12” 36”x36”x12” *NOTE: 2 tiling flanges extending 1” above shoulder on 2 sides. Model No. ( ) Size ( ), as manufactured by Stern-Williams Co., Inc. Shoulders shall not be less than 9-3/4” high inside measurement, and not less than 1-1/4" wide. All models have 6” drop at threshold. Drain shall be cast brass with stainless steel strainer cast integral and shall provide for a caulked lead connection not less than 1” deep to a 3” pipe. Receptor composed of pearl gray marble chips and white Portland cement ground smooth, grouted and sealed to resist stains. Stainless steel cap of one piece 20 ga. 302 stainless steel cast integral on threshold. QUALITY OPTIONAL FITTINGS # A. 4 6" Mop-Service sink fitting with vacuum breaker, adjustable top brace, 3/4" hose thread on spout with bucket hook inlets 8" on center, chrome finish. 4 6" same as above with polished chrome finish. B. 4 Hose and wall hook. Hose 36" long, with 3/4" chrome couplings. Wall bracket of stainless steel. C. 4 Stainless Steel Mop Hanger of stainless steel with #4 finish. . . 24" long, with 3 rubber spring loaded grips. " D. "0 Splash Catcher Panels of 20 ga. type 304 stainless steel. ! $ JOB ARCHITECT LOCATION ENGINEER MANUAL FAUCETS 911-ISCP Wall Mounted Service Sink Faucet with Elevated Vacuum Breaker Spout PRODUCT TYPE Wall mounted service sink faucet with elevated vacuum breaker spout Job Name ____________________________________________________ Item Number _________________________________________________ Section/Tag __________________________________________________ FEATURES & SPECIFICATIONS • Polished chrome plated finish • Solid brass body construction • 8" Rigid valve body centers • 5 3/4” spout with pail hook and wall brace • Elevated vacuum breaker, catalog #892G • 3/4" Male garden hose thread outlet • Cross metal handles with tear drop escutcheons and eight point tapered broach, secured color coded index buttons, catalog #633 • Slow compression renewable cartridge that closes with water pressure with tapered square broach to facilitate handle removal, catalog #217-XTLH • 1⁄ 2" NPT female union nut supply inlets • Integral supply stops • Mounting hardware included Model Specified ______________________________________________ Architect _____________________________________________________ Engineer _____________________________________________________ Contractor ___________________________________________________ ❏ Submitted as Shown ❏ Submitted with Variations Date _________________________________________________________ PERFORMANCE SPECIFICATION • Rated Supply Pressure: 20-125 PSI • Rated Operating Temperature: 40-140° F WARRANTY • Lifetime Limited Faucet Warranty • 5-Year Limited Cartridge Warranty • 1-Year Limited Finish Warranty COMPLIANT TO 9/08 EN BU CO UNCIL I ING M RE LD U.S. G • ASME A112.18.1 E M B E R • CSA B125 2100 South Clearwater Drive Des Plaines, IL 60018 P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com 911-ISCP Wall Mounted Service Sink Faucet with Elevated Vacuum Breaker Spout ARCHITECT/ENGINEER SPECIFICATION Chicago Faucets No. 911-ISCP, Polished chrome plated solid cast brass construction. Elevated vacuum breaker, 5 3/4" spout with pail hook, wall brace and 3/4" male garden hose thread outlet. Cross metal handles with tear drop escutcheons, eight point tapered broach and secured color coded index buttons. Slow compression renewable cartridge that closes with water pressure with square tapered broach feature to help facilitate handle removal. 8" rigid valve body centers with 1/2" NPT female union nut supply inlets. Integral supply stops in body for servicing cartridges. Mounting hardware included. This product is tested and certified to ASME A112.18.1 and CSA B125 industry standards. 3/8 " [10mm] OFFSET FOR ADJUSTMENT (EACH ARM) 1/2" NPT FEMALE THREAD OUTLET (BACK SIDE) 2-5/16" DIA. [58mm] (2 PLACES) 3/4 " [19mm] 1/2" NPT FEMALE THREAD INLET (BACK SIDE) 2-7/8"-4-3/8" [73mm-111mm] ADJUSTABLE 3-1/2 " [89mm] AS REQUIRED 1-1/2 " [38mm] FOR PROPER HEIGHT OF INSTALLATION SEE LOCAL PLUMBING CODES 3 ±1/2 " [76mm ±13mm] ALL DOTTED LINE PIPING SUPPLIED BY OTHERS. 1-1/4" X 2-5/8" [32mm-67mm] OVAL FLANGE 1" x 3" [25mm-76mm] BACKING (2) No.10 x 1-1/2" FLAT HEAD WOOD SCREWS 1/2" NPT PLUG 1-7/8 " [48mm] 1-1/8 " [29mm] 8" [203mm] 4" [102mm] 2-7/8 " [73mm] 2-5/8 " [67mm] 1-3/8 " [35mm] 7/16" DIA. HOLE IN WALL TO ADJUST STOPS 1-1/4 " [32mm] 3" [76mm] TO SUIT 4" [102mm] FIN. FLOOR 1-3/8 " [35mm] 9-1/4 " [235mm] 1-7/8 " [48mm] 3/4" A.N. HOSE THREAD 5-11/16" [144mm] 2-1/4" DIA. [57mm] FLANGE 1/2" NPT FEMALE THREAD INLETS FIN. WALL OPERATION AND MAINTENANCE Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning this product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. ® C US 9/08 Product specifications subject to change without notice. 2100 South Clearwater Drive Des Plaines, IL 60018 P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Plumbing Fixture P2 US-ADA-SERIES - A - 18 GA. S U B M I T TA L UNDERMOUNT GROUP ADA COMPLIANT SPECIFICATION Seamless die-drawn constraction of Type-304, 18-8 stainless steel. Interior and top surfaces polished to a non-porous Hand-Blended Just Finish with highlighted bowl rim. Fully coated underside insulated for sound and reduces condensation. Stright-sided compartment with radius corners provides greater capacity. Conforms to ASME/ANSI A112.19.3M. Certified conformance with ASME A112.19.3/CSA B45.4, Canadian Standards (CSA), Uniform Plumbing Code (UPC) and International Plumbing Code (IPC) and Americans with Disabilities Act (ADA) MODEL NO. US-ADA-13518-A* A B C D 13-1/2 18 11-1/2 16 DEPTH 4-1/2 to 6-1/2 16 16 14 14 4-1/2 to 6-1/2 US-ADA-1618-A 16 18 14 16 4-1/2 to 6-1/2 US-ADA-1620-A 16 20 14 18 4-1/2 to 6-1/2 US-ADA-1818-A 18 18 16 16 4-1/2 to 6-1/2 US-ADA-1821-A 18 21 16 19 4-1/2 to 6-1/2 US-ADA-1824-A 18 24 16 22 4-1/2 to 6-1/2 US-ADA-1830-A 18 30 16 28 4-1/2 to 6-1/2 D ATA US-ADA-1616-A DEPTH * AVAILABLE DRAIN CENTERED ONLY JUST MFG. COMPANY CONTINUES TO MAKE QUALITY AND FUNCTIONALITY A MARK OF THE JUST PRODUCT LINE. TO DO SO REQUIRES THAT WE RESERVE THE RIGHT TO CHANGE PRODUCT INFORMATION WITHOUT NOTICE. FOR THE MOST CURRENT AND ACCURATE INFORMATION REGARDING THE COMPLETE LINE OF JUST SINKS, FAUCETS AND DRAINS, CLICK ON THE SPEC LINE DRAWINGS LINK ON OUR WEB SITE AT www.justmfg.com OPENING FOR J-35 DRAIN DRAIN LOCATION MUST BE SPECIFIED: CENTER (SHOWN) LEFT REAR RIGHT REAR CENTER REAR Job Name Customer Architect/Engineer APPROVED FOR MANUFACTURING M O D E L N O . US-ADA-1620-A Q T Y. LOCATIONS MUST BE A MINIMUM OF 4 1/2"FROM THE BOWL WALL. REVISED-11/2003 COMPANY TITLE SIGNATURE D AT E JUST MANUFACTURING COMPANY . . . . 9233 KING STREET FRANKLIN PARK ILLINOIS 60131-2111 PH: 847-678-5150 FAX: 847-678-6817 E-MAIL: custserv@justmfg.com www.justmfg.com . 3-21 Location: Plumbing Fixture P2 Faucet Symmetrix® Kitchen Faucet S-23 Series Specification Submittal Feature Highlights Model S-23-2-SM ■ Supply has 3/8 inch copper tubing, 8-inch centers ■ Metal contruction, polished chrome finish ■ 2.2 gpm (8.3 L/min) standard flow rate ■ Single lever kitchen faucet with red & blue indicators on handle ■ Handle limit stops ■ 8-3/4 inch swing spout with aerator ■ Ceramic control components Standards / Certifications ASME A112.18.1-2005/CSA B125.1-05 Warranty ■ Limited Lifetime - to the original end purchaser in consumer installations. ■ 5 years - for commercial installations S-23 series S-23-2-LP S-23-2-W S-23-1 S-23-3 Ordering Information Model Numbers Append appropriate -suffix to model number. S-23 S-23-2 S-23-1 S-23-3 Faucet only Faucet with swivel spray aerator in place of hose and spray Faucet with hose and spray Faucet with hose and spray mounted on escutcheon -IPS 1/2 inch IPS connections -VP Vandal resistant, standard 2.2 gpm aerator -NA Non-aerated , laminar flow outlet -SM Single hole mounting Finish Options / Modifications Append appropriate -suffix to model number. * -STN Radiance® satin finish - Polished chrome (standard finish) Handle Options / Modifications Append appropriate -suffix to model number. Other Options Append appropriate -suffix to model number. -LP Loop handle -W Lever handle 6 inch (152mm) chrome only -LST 18 inch copper supply tubing -BH 20 inch (508 mm) braided hose supplies (not available with -SM option) -10 10-7/8 inch swing spout with aerator -.5 .5 gpm (1.9 L/min) flow restrictor, vandal resist. -1.5 1.5 gpm (5.7 L/min) flow restrictor (not available with -BH option) Dimensions Symmetrix Kitchen Faucet, S-23 10-1/8" 257mm 7-1/4" 184mm 5 1/4 133mm 6-1/4" 159mm 6" 152mm spacer 1/2"- 13mm with spacer 1-1/4"- 32mm without spacer optional 1/2-14 NPT fitting 7-1/2" 191mm 1/4-20" UNC 8-3/4" 222mm 10-7/8" 276mm 8" 203mm Note: Dimensions subject to change without notice. Dimensions Symmetrix Kitchen Faucet, S-23-W 10 18 " 257mm 6 14 " 159mm 7 14" 184mm 6 14" 159mm 133mm 5 14 " spacer 1 4 "-20 6" 152mm 7 12 " UNC 191mm 1 2 "- 13mm with spacer 114 "- 32mm without spacer 8 34 " 222mm optional 12 -14 NPT fitting 10 78 " 276mm Note: Dimensions subject to change without notice. 8" 203mm Dimensions Symmetrix Kitchen Faucet, S-23-SM-10 7 14" 184mm 5 14 " 133mm 6 14" 159mm 13 16 "- 1 12 " 38mm max. deck hole 21mm max. 6" 152mm 7 12 " 191mm 10 78 " 276mm optional 12 -14 NPT fitting Note: Dimensions subject to change without notice. Dimensions Symmetrix Kitchen Faucet, S-23-BH 10 18 " 257mm 7 14" 184mm 5 14 " 133mm 6 14" 159mm spacer 1 4 "-20 1 2 "- 13mm with spacer 114 "- 32mm without spacer UNC 20" 508mm 3 8 "-COMP 8 34 " 222mm 10 78 " 276mm Note: Dimensions subject to change without notice. 8" 203mm Dimensions Symmetrix Kitchen Faucet, S-23-SM 7 14" 184mm 5 14 " 133mm 6 14" 159mm 13 16 "- 21mm max. 6" 152mm 1 12 " 38mm max. deck hole 8 34 " 222mm 1 optional 2 -14 NPT fitting 10 78 " 276mm Note: Dimensions subject to change without notice. Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 (800) 796-6667, (781) 848-2250 ■ Fax (800) 961-9621, (781) 664-1300 Website: www.symmons.com ■ Email: c u s t o merservi ce@ symmons.com ©2008, 2010 Symmons Industries, Inc. Printed in U.S.A. 7 12 " 191mm ■ 051010 MECHANICAL FAUCETS Plumbing Fixture P3 Faucet 786-GN2FCCP Manual and Metering Faucets Product Type ___________________________________________________ Deck Mounted 8" Fixed Centers Concealed Hot and Cold Water Sink Faucet Job Name ________________________________________________ Item Number _____________________________________________ Features & Specifications ___________________________________________________ • 8" Fixed Centers • 5-1/4" Flow Control Rigid / Swing Gooseneck Spout • 4" Wristblade Handle • Quaturn Compression Operating Cartridge • 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or 1/2" Flexible Riser • 1.5 GPM (5.7 L/min) Laminar Flow Control Insert in Spout Inlet • CFNow! Item Ships in 5 Days Section/Tag ______________________________________________ Model Specified ___________________________________________ Architect _________________________________________________ Engineer _________________________________________________ Contractor ________________________________________________ [ ] Submitted as Shown [ ] Submitted with Variations Date _____________________________________________________ Performance Specification ___________________________________________________ • Rated Operating Pressure: 20-125 PSI • Rated Operating Temperature: 40-140ºF Warranty ___________________________________________________ • Lifetime Limited Faucet Warranty • 5-Year Limited Cartridge Warranty • 1-Year Limited Finish Warranty Codes & Standards ___________________________________________________ • ASME A112.18.1/CSA B125.1 • Certified to NSF/ANSI 61, Section 9 by CSA • ADA ANSI/ICC A117.1 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Last Revision: 02/09/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice 786-GN2FCCP Manual and Metering Faucets Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 786-GN2FCCP, Deck Mounted 8" Fixed Centers Concealed Hot and Cold Water Sink Faucet, Chrome Plated solid brass construction. 5-1/4" Center to Center Flow Control Rigid / Swing Gooseneck Spout. 1.5 GPM (5.7 L/min) Laminar Flow Control Insert in Spout Inlet. 4" Metal Wristblade handle(s) with Sixteen Point Tapered Broach and Secured Blue and Red Buttons. Quaturn™ rebuildable compression cartridge, opens and closes 90°, closes with water pressure, features square tapered stem. 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or 1/2" Flexible Riser. This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA. Operation and Maintenance ________________________________________________________________________________________________________ Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Last Revision: 02/09/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice ACCESSORIES AND PARTS 116.223.21.1 Plumbing Fixture P4 Faucet Electronic Faucets Product Type ___________________________________________________ Deck Mounted Single Hole HyTronic Gooseneck Sink Faucet with Dual Beam Infrared Sensor Job Name ________________________________________________ Item Number _____________________________________________ Features & Specifications ___________________________________________________ • Single Hole Section/Tag ______________________________________________ Model Specified ___________________________________________ Performance Specification ___________________________________________________ • Rated Operating Pressure: 20-125 PSI • Rated Operating Temperature: 40-140ºF Architect _________________________________________________ Engineer _________________________________________________ Contractor ________________________________________________ Warranty ___________________________________________________ • Lifetime Limited Faucet Warranty • 1-Year Limited Finish Warranty • 5-Year Limited Mechanical Warranty • 3-Year Limited Electronics and Solenoid Warranty [ ] Submitted as Shown [ ] Submitted with Variations Date _____________________________________________________ Codes & Standards ___________________________________________________ • ASME A112.18.1/CSA B125.1 • ADA ANSI/ICC A117.1 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Last Revision: 07/03/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice 116.223.21.1 Electronic Faucets Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 116.223.21.1, Deck Mounted Single Hole HyTronic Gooseneck Sink Faucet with Dual Beam Infrared Sensor, Chrome Plated solid brass construction. . Operation and Maintenance ________________________________________________________________________________________________________ Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Last Revision: 07/03/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice Plumbing Fixture P5 COMMERCIAL FIXTURES Z5220 Tag 19" x 16" Undermount Lavatory Z5220 Series • 19" x 16" [483mm x 406mm] • Vitreous china • Rimless oval design for undermount installation • Front overflow • Waste: 1-1/4" O.D. • Depth: 5" • Shipping Weight: 22 lbs. Engineering Specification ■ Z5220 19" x 16" vitreous china undermount lavatory. Recommended Trim ■ ■ ■ ■ Z8743-PC Grid Strainer Z8700 Series P-Trap Z8800 Series Stop with Flexible Supplies Z8946-1-NT ADA Trap, Stop, and Supply Protectors Z5220 Series 19" x 16" undermount lavatory. Optional Trim Fixtures meet ASME A112.19.2 and CSA B45 standard requirements. LAVATORIES ■ Z8746-PC ADA Grid Strainer ■ Z8946-3-NT ADA Trap, Stop, and Supply Protectors for Offset Grid Strainers This Space is for Architectural/Engineering Approval the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34" Meets [864mm] from finished floor. See Zurn One Systems for suggested packages. Zurn Industries, LLC Commercial Brass and Fixtures Operation 2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com 129 ELECTRONIC-DC FAUCETS 116.201.AB.1 Plumbing Fixture P5 Faucet Electronic Faucets Product Type ___________________________________________________ Deck Mounted Single Hole HyTronic Traditional Sink Faucet with Dual Beam Infrared Sensor Job Name ________________________________________________ Item Number _____________________________________________ Features & Specifications ___________________________________________________ • Single Hole • Traditional Electronic Integral Spout • 0.5 GPM (1.9 L/min) Vandal Proof Non-Aerating Spray • Single Supply for Tempered Water • 6 Volt Lithium CRP2 Battery (Included) • Stainless Steel Hoses Included • Includes Optional 2.2 GPM (8.3 L/min) Aerator Insert • Multiple Field Adjustable Modes and Ranges • Geberit Commander™ Software Compatible • ECAST® design provides durable brass construction with total lead content equal to or less than 0.25% by weighted average • CFNow! Item Ships in 5 Days Section/Tag ______________________________________________ Model Specified ___________________________________________ Architect _________________________________________________ Engineer _________________________________________________ Contractor ________________________________________________ [ ] Submitted as Shown [ ] Submitted with Variations Date _____________________________________________________ Performance Specification ___________________________________________________ • Rated Operating Pressure: 20-125 PSI • Rated Operating Temperature: 40-140ºF Warranty ___________________________________________________ • Lifetime Limited Faucet Warranty • 1-Year Limited Finish Warranty • 5-Year Limited Mechanical Warranty • 3-Year Limited Electronics and Solenoid Warranty Codes & Standards ___________________________________________________ • ASME A112.18.1/CSA B125.1 • Certified to NSF/ANSI 61, Section 9 by CSA • California Health and Safety Code 116875 (AB1953-2006) • Vermont Bill S.152 • NSF/ANSI 372 Low Lead Content • ADA ANSI/ICC A117.1 • CALGreen ECAST products are intended for installation where state laws and local codes mandate lead content levels or in any location where lead content is a concern. 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Last Revision: 07/03/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice 116.201.AB.1 Electronic Faucets Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 116.201.AB.1, Deck Mounted Single Hole HyTronic Traditional Sink Faucet with Dual Beam Infrared Sensor, Chrome Plated solid brass construction. Traditional Electronic Integral Spout. Includes Optional 2.2 GPM (8.3 L/min) Aerator Insert. 0.5 GPM (1.9 L/min) Pressure Compensating Econo-Flo Vandal Proof Non-Aerating Spray. Single Supply for Tempered Water. 6 Volt Lithium CRP2 Battery (Included). Stainless Steel Hoses Included. Multiple Field Adjustable Modes and Ranges. Geberit Commander™ Software Compatible. ECAST® construction with less than 0.25% lead content by weighted average. CALGreen Compliant. This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, Certified to NSF/ANSI 61, Section 9 by CSA, California Health and Safety Code 116875 (AB1953-2006), Vermont Bill S.152, NSF/ANSI 372 Low Lead Content, and California Green Building Standards Code (CALGreen). Operation and Maintenance ________________________________________________________________________________________________________ Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Last Revision: 07/03/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice COMMERCIAL FIXTURES Tag Plumbing Fixture P6 Z5340-PED 20" x 18" Wall Hung Lavatory with Half Pedestal Z5340-PED Series • • • • • • • • • 20" x 18" [508mm x 457mm] Vitreous china Faucet holes for single, 4", or 8" centers Wall hung lavatory provided with wall hanger or for use with concealed arm carrier systems Vitreous china half pedestal Front overflow Waste: 1-1/4" O.D. Depth: 5-3/4" Shipping Weight: 49 lbs. Engineering Specification Z5340-PED Series 20" x 18" wall hung lavatory with half pedestal shown with Z81101 faucet (sold separately). Recommended Trim Optional Trim ■ ■ ■ ■ ■ Z8746-PC ADA Grid Strainer ■ Z8946-3-NT ADA Trap, Stop, and Supply Protectors for Offset Grid Strainers Z8743-PC Grid Strainer Z8700 Series P-Trap Z8800 Series Stop with Flexible Supplies Z8946-1-NT ADA Trap, Stop, and Supply Protectors Fixtures meet ASME A112.19.2 and CSA B45 standard requirements. WALL HUNG LAVATORIES ■ Z5341-PED 20" x 18" vitreous china wall hung lavatory with single faucet hole and half pedestal. Provided with hanger plate and holes for concealed arm carrier systems. ■ Z5344-PED 20" x 18" vitreous china wall hung lavatory with 4" center faucet holes and half pedestal. Provided with hanger plate and holes for concealed arm carrier systems. ■ Z5348-PED 20" x 18" vitreous china wall hung lavatory with 8" center faucet holes and half pedestal. Provided with hanger plate and holes for concealed arm carrier systems. This Space is for Architectural/Engineering Approval the American Disabilities Guidelines and ANSI A117.1 requirements when lavatory is installed 34" Meets [864mm] from finished floor. See Zurn One Systems for suggested packages. Zurn Industries, LLC Commercial Brass and Fixtures Operation 2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com 117 MECHANICAL FAUCETS 895-317GN2FCCP Plumbing Fixture P6 Faucet Manual and Metering Faucets Product Type ___________________________________________________ Deck Mounted 4" Fixed Centers Hot and Cold Water Sink Faucet Job Name ________________________________________________ Item Number _____________________________________________ Features & Specifications ___________________________________________________ • 4" Fixed Centers • 5-1/4" Flow Control Rigid / Swing Gooseneck Spout • 4" Wristblade Handle • Quaturn Compression Operating Cartridge • 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or 1/2" Flexible Riser • 1.5 GPM (5.7 L/min) Laminar Flow Control Insert in Spout Inlet • CFNow! Item Ships in 5 Days Section/Tag ______________________________________________ Model Specified ___________________________________________ Architect _________________________________________________ Engineer _________________________________________________ Contractor ________________________________________________ [ ] Submitted as Shown [ ] Submitted with Variations Date _____________________________________________________ Performance Specification ___________________________________________________ • Rated Operating Pressure: 20-125 PSI • Rated Operating Temperature: 40-140ºF Warranty ___________________________________________________ • Lifetime Limited Faucet Warranty • 5-Year Limited Cartridge Warranty • 1-Year Limited Finish Warranty Codes & Standards ___________________________________________________ • ASME A112.18.1/CSA B125.1 • Certified to NSF/ANSI 61, Section 9 by CSA • ADA ANSI/ICC A117.1 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Last Revision: 02/09/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice 895-317GN2FCCP Manual and Metering Faucets Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 895-317GN2FCCP, Deck Mounted 4" Fixed Centers Hot and Cold Water Sink Faucet, Chrome Plated solid brass construction. 5-1/4" Center to Center Flow Control Rigid / Swing Gooseneck Spout. 1.5 GPM (5.7 L/min) Laminar Flow Control Insert in Spout Inlet. 4" Metal Wristblade handle(s) with Sixteen Point Tapered Broach and Secured Blue and Red Buttons. Quaturn™ rebuildable compression cartridge, opens and closes 90°, closes with water pressure, features square tapered stem. 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or 1/2" Flexible Riser. This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA. Operation and Maintenance ________________________________________________________________________________________________________ Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. 2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com Last Revision: 02/09/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice Plumbing Fixture P7 Z5660 1.6 GPF ADA Height, Elongated Floor Mounted Flush Valve Toilet TAG Z5660 Series • 1.6 gpf (gallons per flush) • Vitreous china • Elongated front rim, 17" high, ADA compliant • 2" fully glazed trapway • Siphon jet flush action • 1-1/2" top spud • Includes bolt caps • Shipping Weight: 57 lbs. Engineering Specification: Z5660 with Top Spud Vitreous china, 1.6 gpf [6 Lpf] low consumption, ADA compliant, floor mounted toilet with siphon jet flush action and elongated front rim with 1-1/2" top spud and two bolt caps. Z5660 Series Recommended Trim: Z6000AV-WS1 AquaVantage® ‘AV’ low con sumption 1.6 gpf exposed closet flush valve. Z5661 with Bedpan Lugs Vitreous china, 1.6 gpf [6 Lpf] low consumption, ADA compliant, floor mounted toilet with siphon jet flush action and elongated front rim designed to accommodate a bedpan with 1-1/2" top spud and two bolt caps. Z5955SS-EL Elongated, standard white, open front toilet seat less cover with stainless steel check hinge. These dimensions and specifications are subject to change without notice. Z5972-COMB Closet bolt/wax ring kit. Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements. Optional Trim: Z5795-FLO-JR PVC Flo-Bowl Jr. closet flange kit Optional Water-Savings Trim: Z6000AV-DF-WS1 AquaVantage® AV dual flush water-conserving exposed closet flush valve (estimated 30% potential water savings). Meets the American Disabilities Guidelines and ANSI A117.1 requirements. This space is for Architectural/engineering Approval See Zurn One Systems for suggested packages. Distributed by: WaterWise Technologies International P.O. Box 18959 · Asheville, NC 28804 REV. A DWG. NO. 80609 www.waterwisetech.net 828.252.8144 DATE: 3/23/06 C.N. NO. 94934 PRODUCT NO. Z5660 Z5660 1.6 GPF ADA Height, Elongated Floor Mounted Flush Valve Toilet Rough-in TAG Rough-in dimensions for Z5660 Series • Z5660 with top spud • Z5661 with bedpan lugs TOILETS FINISHED WALL 1 [25] I.P.S. SUPPLY FINISHED FLOOR These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements. Meets the American Disabilities Guidelines and ANSI A117.1 requirements. Distributed by: WaterWise Technologies International P.O. Box 18959 · Asheville, NC 28804 REV. A DWG. NO. 80609 DATE: 3/23/06 www.waterwisetech.net 828.252.8144 C.N. NO. 94934 PRODUCT NO. Z5660 Plumbing Fixture P7 Flush Valve Royal® Model Flushometer Description Exposed Water Closet Flushometer, for floor mounted or wall hung top spud bowls. Flush Cycle Model 111-1.6 Low Consumption (1.6 gpf/6.0 Lpf) Model 110 Water Saver (3.5 gpf/13.2 Lpf) Specifications Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for left or right handwith the following features: • PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing • 1” I.P.S. Screwdriver Bak-Chek® Angle Stop • Free Spinning Vandal Resistant Stop Cap • Adjustable Tailpiece • High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut • Spud Coupling and Flange for 1½” Top Spud • Sweat Solder Adapter with Cover Tube & Cast Wall Flange with Set Screw • High Copper, Low Zinc Brass Castings for Dezincification Resistance • Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation • Flush Accuracy Controlled by CID™ Technology • Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX® Rubber Compound for Chloramine Resistance Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037. Made with Renewable Energy Variations HL-3 H TP YG YO SG 3” Metal Oscillating Push Button on Front of Valve (does not meet ADA requirements) Handle on Front of Valve Trap Primer Extended Bumper on Angle Stop (for seat with cover) Bumper on Angle Stop (for open front seat without cover) SaniGuard® Antimicrobial Handle and Socket Accessories See Accessories Section of the Sloan catalog for details on these and other Flushometer variations. Fixtures Consult Sloan for Sloan brand matching fixture options. This space for Architect/Engineer approval Job Name Date Model Specified Quantity Variations Specified Customer/Wholesaler Contractor Architect The information contained in this document is subject to change without notice. Royal 110/111 S.S. — Rev. 1e (03/12) Copyright © 2012 SLOAN VALVE COMPANY SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131 Ph: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 www.sloanvalve.com Z5650 Plumbing Fixture P8 1.6 GPF Elongated Floor Mounted Flush Valve Toilet TAG Z5650 Series • 1.6 gpf (gallons per flush) • Vitreous china • Elongated front rim • 2" fully glazed trapway • Siphon jet flush action • 1-1/2" top spud • Includes bolt caps • Shipping Weight: 55 lbs. Engineering Specification: Z5650 with Top Spud Vitreous china, 1.6 gpf [6 Lpf] low consumption, floor mounted toilet with siphon jet flush action and elongated front rim with 1-1/2" top spud and two bolt caps. Z5650 Series Recommended Trim: Z6000AV-WS1 AquaVantage® ‘AV’ low con sumption 1.6 gpf exposed closet flush valve. Z5651 with Top Spud and Bedpan Lugs Vitreous china, 1.6 gpf [6 Lpf] low consumption, floor mounted toilet with siphon jet flush action and elongated front rim designed to accommodate a bedpan with 1-1/2" top spud and two bolt caps. Z5955SS-EL Elongated, standard white, open front toilet seat less cover with stainless steel check hinge. This space is for Architectural/engineering Approval Z5972-COMB Closet bolt/wax ring kit. Optional Trim: Z5795-FLO-JR PVC Flo-Bowl Jr. closet flange kit Optional Water-Savings Trim: Z6000AV-DF-WS1 AquaVantage® AV dual flush water-conserving exposed closet flush valve (estimated 30% potential water savings). These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/ CSA B45 requirements. See Zurn One Systems for suggested packages. Distributed by: WaterWise Technologies International P.O. Box 18959 · Asheville, NC 28804 REV. B DWG. NO. 80608 www.waterwisetech.net 828.252.8144 DATE: 7/24/06 C.N. NO. 94933 PRODUCT NO. Z5650 Z5650 1.6 GPF Elongated Floor Mounted Flush Valve Toilet Rough-in TAG Rough-in dimensions for Z5650 Series • Z5650 with top spud • Z5651 with top spud and bedpan lugs FINISHED WALL 1 [25] I.P.S. SUPPLY FINISHED FLOOR These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/ CSA B45 requirements. Distributed by: WaterWise Technologies International P.O. Box 18959 · Asheville, NC 28804 REV. B DWG. NO. 80608 www.waterwisetech.net 828.252.8144 DATE: 7/24/06 C.N. NO. 94933 PRODUCT NO. Z5650 Plumbing Fixture P8 Flush Valve Royal® Model Flushometer Description Exposed Water Closet Flushometer, for floor mounted or wall hung top spud bowls. Flush Cycle Model 111-1.6 Low Consumption (1.6 gpf/6.0 Lpf) Model 110 Water Saver (3.5 gpf/13.2 Lpf) Specifications Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for left or right handwith the following features: • PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing • 1” I.P.S. Screwdriver Bak-Chek® Angle Stop • Free Spinning Vandal Resistant Stop Cap • Adjustable Tailpiece • High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut • Spud Coupling and Flange for 1½” Top Spud • Sweat Solder Adapter with Cover Tube & Cast Wall Flange with Set Screw • High Copper, Low Zinc Brass Castings for Dezincification Resistance • Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation • Flush Accuracy Controlled by CID™ Technology • Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX® Rubber Compound for Chloramine Resistance Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037. Made with Renewable Energy Variations HL-3 H TP YG YO SG 3” Metal Oscillating Push Button on Front of Valve (does not meet ADA requirements) Handle on Front of Valve Trap Primer Extended Bumper on Angle Stop (for seat with cover) Bumper on Angle Stop (for open front seat without cover) SaniGuard® Antimicrobial Handle and Socket Accessories See Accessories Section of the Sloan catalog for details on these and other Flushometer variations. Fixtures Consult Sloan for Sloan brand matching fixture options. This space for Architect/Engineer approval Job Name Date Model Specified Quantity Variations Specified Customer/Wholesaler Contractor Architect The information contained in this document is subject to change without notice. Royal 110/111 S.S. — Rev. 1e (03/12) Copyright © 2012 SLOAN VALVE COMPANY SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131 Ph: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 www.sloanvalve.com Plumbing Fixture P9 Z5750 0.5 - 1.0 gpf Washout Urinal TAG Z5750 Series • 0.5 - 1.0 gpf (gallons per flush) • Vitreous china • Washout flushing action • 3/4" top spud • 2" I.P.S. outlet flange and rubber gasket with integral trap • 14" extended rim for handicap compliance when installed at proper height • Shipping Weight: 65 lbs. Engineering Specification: Z5750 with 3/4" top spud, vitreous china, 0.5gpf [1.9 Lpf] 1.0 gpf [3.8 Lpf] low consumption, wall hung urinal with 3/4" top spud and concealed wall hanger brackets. Z5750 Series Recommended Trim: Z6003AV-WSI AquaVantage® AV low consumption exposed urinal flush valve. Z5978-STR Urinal Dome Strainer This space is for Architectural/engineering Approval Optional Water-Savings Trim: Z6003AV-EWS AquaVantage® AV .5 gpf extra water savings exposed urinal flush valve. These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A112.19.2-2003 and CAN/CSA B45 requirements. Meets the American Disabilities Guidelines and ANSI A117.1 requirements when urinal is installed 432mm (17”) from finished floor. See Zurn One Systems for suggested packages. Zurn Plumbing Products Group Commercial Brass and Fixtures Operation 2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com REV. F DWG. NO. 80551 DATE: 9/19/06 C.N. NO. 95619 PRODUCT NO. Z5750 Z5750 0.5 - 1.0 gpf Washout Urinal TAG Rough-in dimensions for Z5750 Series • Z5750 with top spud 43 4 [121] 2X SCALE 1 [25] 3 4 [19] I.P.S. SUPPLY 1 2 [13] 25 8 [67] 11 16 [17] 1 [292] 112 21 2 [64] CLIP 14 [356] 1 [470] 182 1 [361] 144 C.L. OUTLET 2 [51] 1 [470] 182 1 [667] 264 1 [114] 42 38 [965] 24 [610] (17 [432] ADA) 1 [495] 192 FINISHED WALL 1 [140] 52 FINISHED FLOOR These dimensions and specifications are subject to change without notice. Fixture dimensions meet ANSI/ASME standard A112.19.2-2003 and CAN/CSA B45 requirements. Meets the American Disabilities Guidelines and ANSI A117.1 requirements when urinal is installed 432mm (17”) from finished floor. Zurn Plumbing Products Group Commercial Brass and Fixtures Operation 2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com REV. F DWG. NO. 80551 DATE: 9/19/06 C.N. NO. 95619 PRODUCT NO. Z5750 Plumbing Fixture P9 Flush Valve Royal® Model Flushometer Description Flush Cycle Specifications Made with Renewable Energy Exposed Urinal Flushometer, for ¾” top spud urinals. Model 186-0.5 (0.5 gpf/1.9 Lpf) Model 186-1.0 Low Consumption (1.0 gpf/3.8 Lpf) Model 186 Water Saver (1.5 gpf/5.7 Lpf) Quiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer with the following features: • PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing • ¾” I.P.S. Screwdriver Bak-Chek® Angle Stop • Free Spinning Vandal Resistant Stop Cap • Adjustable Tailpiece • High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut • Spud Coupling and Flange for ¾” Top Spud • Sweat Solder Adapter w/Cover Tube & Cast Wall Flange w/Set Screw • High Copper, Low Zinc Brass Castings for Dezincification Resistance • Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation • Flush Accuracy Controlled by CID™ Technology • Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX™ Rubber Compound for Chloramine Resistance • 100% of the energy used in manufacturing is offset with Renewable Energy Sources – Wind Energy Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037 and ANSI/ASME A112.19.2. Variations HL-3 3” Metal Oscillating Push Button on front of valve (does not meet ADA requirements) SG SaniGuard® Antimicrobial Handle and Socket See Accessories Section of the Sloan catalog for details on these and other Flushometer variations. This space for Architect/Engineer approval Job Name Date Model Specified Quantity Variations Specified Customer/Wholesaler Contractor Architect The information contained in this document is subject to change without notice. Royal 186 S.S. — Rev. 1a (03/09) Copyright © 2009 SLOAN VALVE COMPANY Made in the U.S.A. SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131 Ph: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 www.sloanvalve.com Design Development Submittal Electrical Equipment Cut Sheets May 10, 2013 RE: Campbell County Memorial Hospital Clinic Gillette WY Type MFG Part E1 F1 Invue Metalux ENT-C02-LED-E1-BL3-BZ 2RDI-S-228T5RP-UNV-EBT1NDIM-U F2 Metalux F3 Metalux 2RDI-S-228T5RP-UNV-EBT1NDIM-U 2RDI-S-2BX40RP-UNV-TUC240PUNVHPB-U 2RDIS2BX40RPUNVLB35A38218GTUC240PUNVHPBU 2RDI-S-228T5RP-UNV-EBT1-U 2RDI-S-228T5RP-UNV-L5835-A3/8-2/18GEBT1U F4 F5 Metalux Metalux 2GC-228T5A125-UNV-EBT1NDIM-U 2GC-228T5A125-UNV-EBT1-U 2GC-228T5A125-UNV-L5835-A3/8-2/18G-EBT1U F6 P2 Failsafe Tech ORM-F-24-428T5-UNV-A125-EB52 700FJTLT12S FJ -TILT 12 IN SATIN NICKEL P2 P2 R1 Tech Tech Portfolio R2 R3 S1 S2 Portfolio RSA Failsafe Metalux S3 W2 X1 Metalux Metalux Surelites X2 Surelites 700LICOFR 700FJ4RFS CD6S213E/6CS226W0LI/DTC6RO/ HB26 CD6S213E/6CS226W1LI/HB26 C500EL MSS-14-120-KSH25-EB51 CR-228T5A-UNV-EBT1-U CR-228T5A-UNV-EBT1-U MSS-28-120-KSH25-EB51 BSX-PA-214T5-UNV-EB51-U EUR60G EDGE-LIT, RECESSED, UNV,GRN, AC ONLY 1&2 EUR60G EDGE-LIT, RECESSED, UNV,GRN, AC ONLY 1&2 X3 FF00010 Invue ENT-C02-LED-E1-BL3-BK-TP www.illumsys.com Page 1/1 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: ENT-C02-LED-E1-BL3-BZ Type: E1 Notes: ISI13-9416 INVUE ® DE SCRIPTION Entri LED features a classic and stylish design with the added benefits of solid state lighting technology, offering outstanding uniformity and energy savings. Using Cooper Lighting’s proprietary LED LightBAR™ technology and AccuLED optical systems, Entri LED offers designers vast versatility in system design, function and performance. Use Entri LED for wall mount architectural lighting applications and egress lighting requirements. UL/cUL listed for use in wet locations. Type Catalog # Project Date Comments Prepared by SP E CIFICATION FEATURES C o n s t r uc t ion O pt ic s Mounting HOUSING: Heavy wall, one piece die-cast aluminum construction for precise tolerance control and repeatability in manufacturing. Integral extruded aluminum heat sink provides superior thermal heat transfer in +40°C ambient environments. Housing and heat sink are designed to offer various options for down lighting, up lighting or a combination of both up and down. FACEPLATE / DOOR: One-piece die-cast aluminum construction. Captive, side hinged faceplate swings open via release of one (1) flush mount die-cast aluminum latch on housing side panel. Door closure and seal is ensured through a robust and positive retention bale latch which upon closing can be heard through distinct sound. GASKET: One-piece molded silicone gasket mates perfectly between the door and housing for repeatable seal. Silicone wire way plug on housing back wall seals incoming electrical leads to prevent moisture and dust entry. LENS: Uplight lens is impact- resistant, 5/32" thick tempered frosted glass sealed to housing with continuous bead silicone gasket. Downlight lens is LED board integrated acrylic overoptics, each individually sealed for IP66 rating. HARDWARE: Stainless steel mounting screws and latch hardware allow access to electrical components for installation and servicing. DISTRIBUTION: Primary downlight distribution offers a choice of six (6) patented, high efficiency AccuLED Optics™, that maximize light collection and directional distribution onto the application region. Each optical lens is precision manufactured via injection-molding, then precisely arranged and sealed on the board media. Optional uplight LED distribution features a diffuse soft glow for enhancing architectural scenes or accentuating structural features. LEDs: High output LEDs, 50,000+ hours life at >70% lumen maintenance, offered standard in 4000K (+/- 275K) CCT and nominal 70 CRI. JUNCTION BOX: Standard with zinc plated quick-mount junction box plate that mounts directly to 4" J-Box. LightBARs mount facing downward. Fixture slides over mounting plate and is secured with two (2) stainless steel fasteners. Mounting plate features a onepiece EPDM gasket on back side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. Optional mounting arrangements utilize a die-cast mounting adaptor box to allow for LED battery pack, surface conduit and through branch wiring. Entri LED is approved for mounting on combustible surfaces. DIMESIONS ENT ENTRI LED TRIANGLE REVEALS F i n i sh Ele c t r i c a l DRIVER: LED drivers are potted and heat sunk for optimal performance and prolonged life. Standard drivers feature electronic universal voltage (120-277V/50-60Hz), greater than 0.9 power factor, less than 20% harmonic distortion and feature ambient temperature range of +40°C (104°F) down to minimum starting temperature of -30°C (-22°F). Shipped standard with Cooper Lighting proprietary circuit module designed to withstand 10kV of transient line surge. Options to control light levels, energy savings and egress capabilities (battery pack and separate circuit) are available. All LED LightBARs and drivers are mounted to a primary mounting plate and are easily replaced by use of quick disconnects for ease of wiring. Housing is finished in 5-stage Super TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. LightBAR cover plates are standard white and may be specified to match finish of luminaire housing. Standard colors include black, bronze, grey, white, dark platinum and graphite metallic. RAL and custom color matches available. Consult Outdoor Architectural Colors brochure for a complete selection. 1 - 2 LightBARs Solid State LED ARCHITECTURAL WALL LUMINAIRE Warranty Entri LED features a five-year limited warranty. CERTIFICATION DATA CONDUIT MOUNT / BATTERY BACK BOX UL/cUL Listed ISO 9001 IP66 LightBARs ARRA Compliant LM79 / LM80 Compliant ENERGY DATA 8-1/8" [206mm] 11" [279mm] SHIPPING DATA Approximate Net Weight: 16 lbs. (7.3 kgs.) C ER TEM S YS D 7-3/4" [196mm] S 15-3/4" [400mm] Electronic LED Driver >0.9 Power Factor <20% Total Harmonic Distortion 120-277V/50 & 60hz, 347V/60hz, 480V/60hz -30°C Minimum Temperature 40°C Ambient Temperature Rating TIFIE AVU092077 2013-02-27 17:23:26 Catalog Number: ENT-C02-LED-E1-BL3-BZ Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: E1 Notes: ISI13-9416 ENT EN TRI L ED TRIAN G L E REVEAL S P O W E R A N D L U M EN S B Y BA R C O U N T LUME N MULT IP LIE R DISTRIBUTION Number of LightBARs Power [Watts] Current @ 120V [A] Current @ 277V [A] BL2 BL3 BL4 GZW SLR/ SLL 7 LED LIGHTBAR C01 27 0.23 0.13 1,770 1,625 1,720 1,725 1,571 C02 54 0.46 0.21 3,540 3,249 3,440 3,450 3,142 Ambient Temperature Lumen Multiplier 10°C 15°C 25°C 40°C 1.04 1.03 1.00 0.96 21 LED LIGHTBAR B01 27 0.23 0.13 2,177 1,998 2,115 2,122 1,932 B02 51 0.43 0.20 4,354 3,996 4,231 4,244 3,865 ORDERING INFORMATION Sample Number: ENT-B02-LED-E1-BL3-GM Product Family 1 ENT=Entri Triangle Reveals Lamp Type LED=Solid State Light Emitting Diodes Number of 2, 3 Lightbars B01=[1] 21 LED LightBAR Voltage E1=Electronic (120-277V) B02=[2] 21 LED LightBARs C01=[1] 7 LED LightBARs 347=347V 480=480V C02=[2] 7 LED LightBARs Notes: 1 Distribution BL2=Type II w/Back Light Control BL3=Type III w/Back Light Control BL4=Type IV w/Back Light Control GZW=Wall Grazer Wide SLL=90 Degree Spill Light Eliminator Left Finish 4 BK=Black Options 5 ULG=Uplight Glow Accessories 11 VA2001-XX=Thru-Way Conduit AP=Grey BZ=Bronze PC=Button Type Photocell (Available in 120V, 208V, 240V, and 277V) VA6172=Wire Guard WG=Wire Guard 2L=Two Circuits6 MA1253=10kV Circuit Module Replacement WH=White DP=Dark Platinum GM=Graphite Metallic SLR=90 Degree Spill Light Eliminator Right DesignLights™Consortium Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details. 2 Standard 4000 K CCT and greater than 70 CRI. LightBARS for downlight use only. 3 21 LED LightBAR powered at 350mA, 7 LED LightBAR powered at 1A. 4 Custom and RAL color matching available upon request. Consult your customer service representative for further information. 5 Add as suffix in the order shown. 6 Low-level output varies by bar count, consult factory. Not available with 347V or 480V. Available with 2 Bars (B02 or C02) only. 7 Consult customer service for lead times and lumen multiplier. 8 Available with B02 or C02, only (1) LightBAR on street side will be wired to sensor. Time Delay factory setting 15 minutes. When ordered with Option PC, both light bars will connected to photocell as primary switching means. Standard sensor lens covers 8-foot mount height, 360-degree coverage, maximum 48-foot diameter. Not available in all configurations or with BBB or CWB options. 9 Specify 120 or 277V. LED standard integral battery pack is rated for minimum operating temperature 32°F (0°C). Operates (1) lightbar for 90 minutes. Not available in all configurations or with OSB option. Consult factory. 10 Specify 120 or 277V. LED cold weather integral battery pack is rated for minimum operating temperature -4°F (-20°C). Operates (1) lightbar for 90 minutes. Not available in all configurations or with OSB option. 11 Order separately, replace XX with color suffix. Adaptor Box VA6173=Tamper Resistant Driver Bits TP=Tamper Resistant Hardware LCF=LightBAR Cover Plate Matches Housing Finish 7060=70 CRI/6000K CCT7 8030=80 CRI/3000K CC7 OSB=Occupancy Sensor with8 Back Box BBB=Battery Pack with Back 9 Box (Specify 120 or 277) CWB=Cold Weather Battery 10 Pack with Back Box (Specify 120 or 277) NOTE: Specifications and dimensions subject to change without notice. Visit our web site at www.cooperlighting.com AVU092077 2013-02-27 17:23:26 Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 2013-02-27 17:02:20 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: Type: 2RDI-S-228T5RP-UNV-EBT1NDIM-U Notes: F1 ISI13-9416 COOPER LIGHTING - METALUX ® DESCRIPTION The Ovation Series is a complete family of recessed direct/indirect luminaires featuring pleasant modern architectural styling, computerdesigned optics and the latest energy efficient lamp and ballast technology. The luminaire combines a matte white indirect reflector and two perforated direct lamp shields to provide optimum brightness control. All components are located above the ceiling plane for a clean architectural appearance in the finished space. Carefully balanced design elements combine to provide an efficient and exciting, high performance alternative to traditional general lighting. Ovation is an excellent choice for a wide variety of commercial applications. Type Catalog # Project Date Comments Prepared by SPECIFICATION FEATURES Construction Ballast Access Nominal 6" deep housing is die formed of code gauge, prime cold rolled steel. Heavy gauge end plates are securely attached with screws for strength and rigidity and the elimination of gaps. Four auxiliary fixture end suspension points are provided. KOs for continuous row wiring. Large access plate for supply connection. Ballast can be removed from below the ceiling. Electrical* Reflectors Indirect reflector has high reflectance baked matte white enamel finish for luminous uniformity. A pair of positively Finish retained side-mounted direct lamp Durable cold rolled steel with shields is constructed of heavy gauge multistage, iron phosphate pre- perforated steel with high reflectance treatment and white enamel painted after fabrications finish and finish to ensure maximum milky white overlay diffuser for visual bonding and rust inhibition. comfort. All reflectors are precision formed in a computer-controlled operation. 2RDI-S 228T5 428T5 254T5HO 454T5HO Controls Ballasts are Class “P” and are positively secured. Rotor-lock lampholders ensure positive lamp retention. UL/CUL listed. Suitable for damp locations. Fifth Light ballast options are offered for both 0-10V continuous dimming and DALI applications. Combine with energysaving products like occupancy sensors, daylighting controls, and lighting relay panels from Cooper Controls (www.coopercontrol.com) to maximize energy savings. T5 OR T5HO LAMPS 2' X 4' Recessed Direct/Indirect Side-Mount 6" [152mm] 23-3/4" [603 mm] ENERGY DATA Input Watts: MOUNTING DATA LAMP CONFIGURATIONS 7/8" [22mm] K.O. (2) 6" [152mm] 6" [152mm] 20-1/2" [521mm] 23 3/4" [603mm] 5-5/16" [135mm] Luminaire Efficacy Rating LER = FL58 Catalog Number: 2RDI-S-228T5RP 23-3/4" [603mm] 6" [152mm] 19-5/8" [498mm] 5-5/16" [135mm] 47-11/16" [1211mm] 2-1/2" [64mm] 1-1/2" [38mm] 2-3/4" [70mm] 23-3/4" [603mm] COOPER LIGHTING Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $4.14 *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. 23-3/4" [603mm] **Consult Pre Sales Technical Support. CEILING COMPATIBILITY Wiring Access Plate 7/8" [22mm] K.O. (2) EB Ballast & STD Lamps 228T5 (68) 428T5 (136) 254T5 (120) 454T5 (240) G Grid/Lay-in Standard T Slot Grid ***See Drywall Frame Kit Accessory F Drywall Frame Kit Ceiling Type** Trim Type Exposed Grid Concealed T Slot Grid Flange G G or T G or T *** LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. ADF020610 Catalog Number: Type: 2RDI-S-228T5RP-UNV-EBT1NDIM-U Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) F1 Notes: ISI13-9416 2RDI-S PHOTOMETRICS Coefficients of Utilization rc rw Candela Effective floor cavity reflectance 80% 70% 70 50 30 10 20% 50% 70 50 30 10 50 30 10 30% 10% 50 30 10 50 30 10 0% Angle 0 0 5 10 15 RCR 0 80 80 80 80 78 78 78 78 75 75 75 72 72 72 69 69 69 67 1 2 73 70 67 65 71 68 66 64 66 63 61 63 61 60 61 59 58 56 67 61 61 54 56 53 48 44 65 60 59 53 55 48 52 43 57 51 54 51 46 43 55 52 49 45 50 42 53 51 48 47 44 41 47 40 20 25 30 56 48 42 37 54 47 41 37 45 40 36 43 39 36 42 38 35 34 35 51 42 47 37 36 31 31 27 49 41 45 37 35 31 31 27 40 36 35 31 30 26 38 34 34 30 30 26 37 33 30 33 29 26 29 25 40 45 43 34 39 30 28 23 24 20 42 33 38 30 27 24 23 20 32 29 27 23 24 20 31 26 28 23 23 20 30 26 23 27 23 20 21 18 50 36 27 21 17 35 27 21 17 26 21 17 25 20 17 24 20 17 16 34 25 19 15 33 24 19 15 23 19 15 23 18 15 22 18 15 14 3 4 5 6 2RDI-S-228T5RP Electronic Ballast F28T5/835 Lamps 2900 Lumens Spacing criterion: (II) 1.3 x mounting height, (⊥) 1.3 x mounting height Efficiency 67.3% Test Report: 2RDIS228T5RP.IES 7 8 9 10 Zonal Lumen Summary Typical VCP Percentages Zone Lumens %Lamp %Fixture 0-30 991 1626 17.1 28.0 25.4 41.7 2917 3902 3602 50.3 67.3 67.3 74.7 100.0 100.0 0-40 0-60 0-90 0-180 Room Size (Ft.) 20 x 20 30 x 30 30 x 60 60 x 30 60 x 60 Height Along 8.5’ 10.0’ 67 75 61 66 59 61 61 58 64 58 Height Across 8.5’ 10.0’ 57 67 49 55 44 46 54 48 Along II 1269 45° 1269 1263 1248 1260 1248 1266 1252 1222 1223 1228 1183 1132 1186 1137 1192 1148 1070 996 1079 1014 1096 1037 Across ⊥ 1269 913 941 975 820 719 863 781 912 849 609 698 784 494 378 616 537 718 654 75 80 270 180 108 458 374 257 584 486 297 85 90 42 0 79 0 105 0 55 60 65 70 59 48 LER = FL58 Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $4.14 Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 4/13 ADF020610 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: Type: 2RDI-S-228T5RP-UNV-EBT1NDIM-U Notes: F1 ISI13-9416 2RDI-S ORDERING INFORMATION SAMPLE NUMBER: 2RDI-S-228T5RP-120V-EBT1-U Width 2=2' Width Number of Lamps 2=2 Lamps 4= 4 Lamps Series RDI=Ovation Series (Recessed Direct/Indirect) Wattage 28T5=28W T5 (48") (1) 54T5=54W T5HO (48") (1) Trim Type Leave Blank=Grid/Lay-in (Standard) Lamp Position S=Side Mounted Lamps (1) Lamp Shield X=Solid Matte White RP=Round Perforated White Steel Options RIF1=Radio Interference Suppressor REP=Riveted Endplates LSC=Lamp Shield Cable ST=Semi-Specular Tannenbaum Ballast Type EBT =T5 or T5HO Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Standard Ballast Factor=1.0 Ballast/FactorType Voltage (1) 120V=120 Volt 277V=277 Volt 347V=347 Volt UNV=Universal Voltage 120-277 Options GL=Single Element Fuse GM=Double Element Fuse Lamps=Lamps installed Flex=Flex installed EL=Emergency Installed (2) NOTES: Products also available in non-US voltages and frequencies for international markets. An EQ Grid (3) Clip is recommended for all 9/16" ceiling systems. Four required per fixture. 2' x 2' and 2' x 4' Center Lamp (4) (5) Shield models only. .90 ballast factor available for 2 or 3 14W T5 or 28W T5 lamps only. 1-Lamp step dim(6) ming ballast in a Normal Ballast factor not available. 2-Lamp ballast will not operate 1-Lamp. 1-Lamp ballast in (7) a High Ballast factor not available. For a complete listing of Fifthlight Technology products and other solutions from (8) 0-10V ballast do not include DALI feature. Please select DALI ballast Cooper Controls, visit www.coopercontrol.com. (9) for use with Fifth Light system. Specification grade 0-10V dimming ballast are NEMA premium and CEE listed. They (10) are compatible with low mercury and energy saving lamps. Specification Grade 0-10V ballast not offered in 3 or 4(11) lamp versions. Standard 0-10V ballast not offered in 3 or 4-lamp versions. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. EBT N=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Normal Ballast Factor=.90 (4) EBT H=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. High Ballast Factor=1.15 (6) EBT NDIM=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, Normal Ballast Factor=.95-1.0 (5) EBT HDIM=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, High Ballast Factor=1.15 0-10V Dimming Ballasts (8) 5LTV5 =T5 0-10V Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 (11) 5LTVS5 =T5 0-10V Spec Grade Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 (9), (10) 5LTV5H =T5HO 0-10V Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 (11) 5LTVS5H =T5HO 0-10V Spec Grade Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 (9), (10) Packaging U=Unit Pack PALC=Job Pack, in carton ACCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips(2) DF-24-W=Drywall Frame Kit Fifth Light DALI Ballasts (7) 5LT5 =T5 DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 5LT5H =T5HO DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 Number of Ballasts 1=1 Ballast 2=2 Ballasts 3=3 Ballasts SHIPPING INFORMATION Catalog No. 2RDI-S-228T5RP 2RDI-S-428T5RP 2RDI-S-254T5RP 2RDI-S-454T5RP Wt. 25 lbs. 25 lbs. 25 lbs. 25 lbs. Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 4/13 ADF020610 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: Type: 2RDI-S-228T5RP-UNV-EBT1NDIM-U Notes: ISI13-9416 F1 Catalog Number: 2RDI-S-2BX40RP-UNV-TUC240PUNVHPB-U Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: F2 Notes: ISI13-9416 COOPER LIGHTING - METALUX ® DESCRIPTION The Ovation Series is a complete family of recessed direct/indirect luminaires featuring pleasant modern architectural styling, computerdesigned optics and the latest energy efficient lamp and ballast technology. The luminaire combines a matte white indirect reflector and two perforated direct lamp shields to provide optimum brightness control. All components are located above the ceiling plane for a clean architectural appearance in the finished space. Carefully balanced design elements combine to provide an efficient and exciting, high performance alternative to traditional general lighting. Ovation is an excellent choice for a wide variety of commercial applications. Type Catalog # Project Date Comments Prepared by SPECIFICATION FEATURES Construction Ballast Access Reflectors Nominal 6" deep housing is die formed of code gauge, prime cold rolled steel. Heavy gauge end plates are securely attached with screws for strength and rigidity and the elimination of gaps. Four auxiliary fixture end suspension points are provided. KOs for continuous row wiring. Large access plate for supply connection. Ballast can be removed from below or from above using the unique ballast mounting/access plate. Indirect reflector has high reflectance baked matte white enamel finish for luminous uniformity. A pair of positively retained side-mounted direct lamp shields is constructed of heavy gauge perforated steel with high reflectance painted after fabrications finish and milky white overlay diffuser for visual comfort. All reflectors are precsion formed in a computer-controlled operation. Electrical* Ballasts are CBM/ETL Class "P" and are positively secured. Biax models use 2G11 base lampholders with double edge wiping action pressure lock contacts and vertically oriented lamp support clips. T8 models use rotor-lock lampholders for positive lamp retention. UL/CUL listed. Suitable for damp locations. Finish Durable cold rolled steel with multistage, iron phosphate pretreatment and white enamel finish to ensure maximum bonding and rust inhibition. Controls Fifth Light ballast options are offered for both 0-10V continuous dimming and DALI applications. Combine with energysaving products like occupancy sensors, daylighting controls, and lighting relay panels from Cooper Controls (www.coopercontrol.com) to maximize energy savings. 2RDI-S 232, 432 T2BX40 T8 OR BIAXIAL LAMPS 2' X 4' Recessed Direct/Indirect Side-Mount 6" [152mm] ENERGY DATA Input Watts: 23-3/4" [603 mm] EB Ballast & STD Lamps 232 (61), 432 (122) T2BX40 (140), T2BX50 (212) T2BX55 (220) MOUNTING DATA LAMP CONFIGURATIONS ES Ballast & STD Lamps 232 (71), 432 (142) BIAX MODEL 7/8" [22mm] K.O. (2) 6" [152mm] 6" [152mm] 23-3/4" [603mm] 5-5/16" [135mm] T8 MODEL STD Ballast & STD Lamps T2BX40 (164) 18-1/16" [459mm] 20-1/4" [498mm] Luminaire Efficacy Rating LER = FL54 Catalog Number: 2RDI-S-232RP 23-3/4" [603mm] 7/8" [22mm] K.O. (2) 6" [152mm] Ballast Access Plate 3-13/16" 47-11/16" [97mm] [1211mm] 1-1/2" [38mm] 2-3/4" [70mm] 23-3/4" [603mm] COOPER LIGHTING 19-5/8" [498mm] 23-3/4" [603mm] 5-5/16" [135mm] Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $4.44 *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. 23-3/4" [603mm] **Consult Pre Sales Technical Support. Wiring Access Plate 7/8" [22mm] K.O. (2) 2-1/2" [64mm] 6" [152mm] CEILING COMPATIBILITY 9-11/16" [246mm] G Grid/Lay-in Standard T Slot Grid ***See Drywall Frame Kit Accessory F Drywall Frame Kit Ceiling Type** Trim Type Exposed Grid Concealed T Slot Grid Flange G G or T G or T *** LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. ADF020604 Catalog Number: 2RDI-S-2BX40RP-UNV-TUC240PUNVHPB-U Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: F2 Notes: ISI13-9416 2RDI-S PHOTOMETRICS Coefficients of Utilization rc rw Candela Effective floor cavity reflectance 80% 70% 70 50 30 10 20% 50% 70 50 30 10 50 30 10 30% 10% 50 30 10 50 30 10 0% 0 RCR Efficiency 63.6% Test Report: 2RDIS232RP.IES 1090 1091 1093 1077 1055 1080 1059 1081 1061 76 76 74 74 74 74 71 71 71 68 68 68 65 65 65 64 15 1 2 69 66 63 60 67 64 62 59 62 59 57 59 57 56 57 55 54 53 62 57 57 50 52 49 45 40 61 56 55 49 52 44 48 40 53 47 50 47 43 39 51 48 45 42 46 39 49 47 45 44 40 38 43 36 20 25 30 1021 977 1029 988 1032 998 923 941 957 52 44 38 34 50 43 38 34 42 37 33 40 36 33 39 35 32 31 47 39 43 35 33 28 29 24 46 38 42 34 32 28 28 24 37 33 32 28 28 24 35 31 32 27 28 24 34 30 27 31 27 24 26 22 35 40 45 861 790 886 827 911 864 711 764 816 40 31 37 28 25 21 22 18 39 30 36 27 25 22 21 18 29 26 25 21 22 18 29 24 26 21 21 18 28 24 21 25 21 18 19 17 50 700 634 768 721 34 25 19 16 33 25 19 16 24 19 16 23 19 15 22 18 15 14 55 60 625 532 436 570 677 31 23 17 14 31 22 17 14 22 17 14 21 17 14 20 16 14 12 65 339 249 511 454 639 598 173 112 52 394 302 82 540 333 96 0 0 0 6 Spacing criterion: (II) 1.3 x mounting height, (⊥) 1.3 x mounting height 45° 1093 76 76 5 F40BX/35K/RS Lamps 2800 Lumens 5 10 Across ⊥ 1093 Along II 1093 0 3 4 2RDI-S-232RP Electronic Ballast Angle 0 7 8 9 10 Zonal Lumen Summary Typical VCP Percentages Zone Lumens %Lamp %Fixture Room Size (Ft.) 0-30 859 1414 15.3 25.2 24.1 39.7 2568 3560 3560 45.9 63.6 63.6 72.1 100.0 100.0 0-40 0-60 0-90 0-180 20 x 20 30 x 30 30 x 60 60 x 30 60 x 60 Height Along 8.5’ 10.0’ 68 76 59 66 56 60 58 54 63 56 70 75 Height Across 8.5’ 10.0’ 55 67 46 53 42 44 51 46 80 85 90 57 46 LER = FL54 Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $4.44 Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 4/13 ADF020604 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 2RDI-S-2BX40RP-UNV-TUC240PUNVHPB-U Type: F2 Notes: ISI13-9416 2RDI-S ORDERING INFORMATION SAMPLE NUMBER: 2RDI-S-232RP-120V-EB51-U Width 2=2' Width Series RDI=Ovation Series (Recessed Direct/Indirect) Trim Type Leave Blank=Grid/Lay-in (Standard) Lamp Position S=Side Mounted Lamps (1) Number of Lamps 2=2 Lamps 4= 4 Lamps T2=2'x4' Fixture with Two Biax Lamps at Each End Wattage 32=32W T8 (48") (6) BX40=40W Biax (24") BX50=50W Biax (24")(1) BX55=55W Biax (24")(1) Lamp Shield X=Solid Matte White RP=Round Perforated White Steel Voltage (1) 120V=120 Volt 277V=277 Volt 347V=347 Volt UNV=Universal Voltage 120-277 Options GL=Single Element Fuse GM=Double Element Fuse Lamps=Lamps installed Flex=Flex installed EL=Emergency Installed (2) NOTES: Products also available in non-US voltages and frequencies for international markets. An EQ (3) Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. 2' x 2' and 2' x 4' (4) (5) Center Lamp Shield models only. Not available in UNV voltages. Must specify voltage. For a complete listing of Fifthlight Technology products and other solutions from Cooper Controls, visit www.coopercontrol.com. (6) (7) Ballast Factor is 0.88 for 4 lamp 32W T8 fixtures. 0-10V ballast do not include DALI feature. Please select DALI (8) ballast for use with Fifth Light system. Specification grade 0-10V dimming ballast are NEMA premium and CEE (9) listed. They are compatible with low mercury and energy saving lamps. Specification Grade 0-10V ballast not (10) (11) available for Biax lamps. Specification Grade 0-10V ballast not offered in 3 or 4-lamp versions. Standard 0(12) 10V ballast not available for Biax lamps. Voltage must be specified for Standard 0-10V 32W 3 and 4-lamp ballast. 4-lamp ballast versions must be 277V. For complete product data, reference the Fluorescent pecification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. Ballast Type Blank=Standard Magnetic Ballast (40W Biax only) EB8 =T8 Electronic Start. Total Harmonic Distortion < 10% EB8 /PLUS= T8 Electronic Start. Total Harmonic Distortion < 10%. High Ballast Factor > 1.15. ER8 =T8 Electronic Program Rapid Start. Total Harmonic Distortion < 10% EB5 =T5 Biax Electronic Instant Start. Total Harmonic Distortion < 20% (4) TEB5 =T5 Biax Electronic Instant Start. Total Harmonic Distortion < 10% (4) ER5 =T5 Biax Electronic Program Rapid Start. Total Harmonic Distortion < 10% High Performance T8 Ballasts HB8 =T8 Electronic Instant Start. Total Harmonic Distortion < 10%. Standard Ballast Factor .86 – .88 HB8 L=T8 Electronic Instant Start. Total Harmonic Distortion < 10%. Low Ballast Factor .77 – .82 HB8 N=T8 Electronic Instant Start. Total Harmonic Distortion < 10%. Normal Ballast Factor 1.0 HB8 H=T8 Electronic Instant Start. Total Harmonic Distortion < 10%. High Ballast Factor 1.15 – 1.20 HR8 =T8 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Standard Ballast Factor .86 – .88 HR8 DIM=T8 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming. Ballast Factor .88 HR8 L=T8 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Low Ballast Factor .71 – .79 HR8 H=T8 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. High Ballast Factor 1.15 – 1.20 Packaging Options RLS=Rotor-Lock Socket U=Unit Pack (T8 Lamps Only) PALC=Job RIF1=Radio Interference Pack, in carton Suppressor REP=Riveted Endplates LSC=Lamp Shield Cable ST=Semi-Specular Tannenbaum ACCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips(2) DF-24-W=Drywall Frame Kit 0-10V Dimming Ballasts (7) 5LTV8 =T8 0-10V Program Rapid Start. Total Harmonic Distortion <10%. Ballast Factor 0.87 (11), (12) 5LTVS8 =T8 0-10V Spec Grade Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 0.87 (8), (9), (10) Fifth Light DALI Ballasts (5) 5LT8 =T8 DALI Program Rapid Start. Total Harmonic Distortion < 10% Ballast Factor 1.0 5LT5B =T5 Biax DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 Number of Ballasts 1=1 Ballast 2=2 Ballasts 3=3 Ballasts SHIPPING INFORMATION Catalog No. Wt. 2RDI-S-T2BX40RP 2RDI-S-232 2RDI-S-432 27 lbs. 27 lbs. 27 lbs. Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 4/13 ADF020604 Catalog Number: 2RDI-S-2BX40RP-UNV-TUC240PUNVHPB-U Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: F2 Notes: ISI13-9416 C240PUNVHP-B APPLICATION and PERFORMANCE SPECIFICATION p Electronic compact p fluorescent ballast for ((2/1)) FT40W/2G11,, ((2/1)) FT40WES/2G11 (28W) ( ) and Description: (2/1) FT40WES/2G11 (25W) • Line Voltage: 120Vac to 277Vac, ±10%, 50-60Hz • High Power Factor Line Model C240PUNVHP-B C240PUNVHP-B C240PUNVHP-B C240PUNVHP-B C240PUNVHP-B C240PUNVHP-B C240PUNVHP B • Programmed Rapid Start • Series Lamp Connection Input Nominal Ballast Power Volts Type Lamp # Watts Line Amps Factor Factor (min.) 120 277 120 277 120 277 120 277 120 277 120 277 FT40W/2G11 FT40W/2G11 FT40W/2G11 FT40W/2G11 FT40WES/2G11(28W) FT40WES/2G11(28W) FT40WES/2G11(28W) FT40WES/2G11(28W) FT40WES/2G11(25W) FT40WES/2G11(25W) ( ) FT40WES/2G11(25W) FT40WES/2G11(25W) 2 2 1 1 2 2 1 1 2 2 1 1 76 73 41 40 71 68 36 34 59 58 30 30 0.63 0.27 0.34 0.15 0.59 0.25 0.30 0.13 0.49 0.21 0.25 0.12 0.90 0.90 1.00 1.00 1.00 1.00 1.00 1.00 0.94 0.94 1.00 1.00 0.98 0.98 0.95 0.95 1.00 0.98 1.00 0.95 1.00 1.00 1.00 0.90 THD Crest Factor < 10% < 10% < 10% < 10% < 10% < 12% < 10% < 10% < 10% < 10% < 10% < 10% <1.5 <1.5 <1.5 <1.5 <1.5 <1.5 <1.5 <1.5 <1.5 <1.5 <1.5 <1.5 Application and Performance Specification Information Subject to Change without Notification. Performance: • Meets ANSI Standard C82.11 • Meets FCC Part 18 Non-Consumer Limits for EMI/RFI • Operating Frequency Range: 60-70 kHz • Auto-Reset Shutdown Circuit per NEMA Recommendations - Lamp relights upon insertion in socket. Application: • Minimum Starting Temperature: For ES Lamps: • Maximum Ambient Temperature: • Maximum Case Temperature (@ tc): • Sound Rated: • Lead configuration: i • R Remote M Mounting • Consult factory for Tandem Wiring Safety: • No PCB's • UL listed (Class P) - Type 1, Outdoor Physical Parameters 9.50" Width: 1.50" Mounting: 8.91" Height: 1.00" Weight: 1.1 lbs Qty/Carton: 12 Color: Black C M i l M l Can Material: Metal 0° F, -18° C 60° F, 16° C 122° F, 50° C 167° F, 75° C A Left - Black/White (25"/25") Right - Red/Yellow/Blue (33"/48"/33") 12 ffeet Overall Length: Warranty: Universal Lighting Technologies warrants to the purchaser that each electronic ballast will be free from defects in material or workmanship for a period of 5 years from date of manufacture when properly installed and under normal conditions of use. Call 1-800-BALLASTx800 for technical assistance. Manufactured in North America Ballast wires stripped to 3/8". Ballast Case Must be Grounded Install in accordance with the National Electrical Code Red Black White Black Red One Lamp Application White Blue Reds Two Lamp Application Yellows Blues Blue Note: For one lamp application cap both yellow leads and insulate to 600V. 1-800-BALLAST www.unvlt.com March 2012 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 2RDI-S-228T5RP-UNV-EBT1-U Type: F3 Notes: ISI13-9416 COOPER LIGHTING - METALUX ® DESCRIPTION The Ovation Series is a complete family of recessed direct/indirect luminaires featuring pleasant modern architectural styling, computerdesigned optics and the latest energy efficient lamp and ballast technology. The luminaire combines a matte white indirect reflector and two perforated direct lamp shields to provide optimum brightness control. All components are located above the ceiling plane for a clean architectural appearance in the finished space. Carefully balanced design elements combine to provide an efficient and exciting, high performance alternative to traditional general lighting. Ovation is an excellent choice for a wide variety of commercial applications. Type Catalog # Project Date Comments Prepared by SPECIFICATION FEATURES Construction Ballast Access Nominal 6" deep housing is die formed of code gauge, prime cold rolled steel. Heavy gauge end plates are securely attached with screws for strength and rigidity and the elimination of gaps. Four auxiliary fixture end suspension points are provided. KOs for continuous row wiring. Large access plate for supply connection. Ballast can be removed from below the ceiling. Electrical* Reflectors Indirect reflector has high reflectance baked matte white enamel finish for luminous uniformity. A pair of positively Finish retained side-mounted direct lamp Durable cold rolled steel with shields is constructed of heavy gauge multistage, iron phosphate pre- perforated steel with high reflectance treatment and white enamel painted after fabrications finish and finish to ensure maximum milky white overlay diffuser for visual bonding and rust inhibition. comfort. All reflectors are precision formed in a computer-controlled operation. 2RDI-S 228T5 428T5 254T5HO 454T5HO Controls Ballasts are Class “P” and are positively secured. Rotor-lock lampholders ensure positive lamp retention. UL/CUL listed. Suitable for damp locations. Fifth Light ballast options are offered for both 0-10V continuous dimming and DALI applications. Combine with energysaving products like occupancy sensors, daylighting controls, and lighting relay panels from Cooper Controls (www.coopercontrol.com) to maximize energy savings. T5 OR T5HO LAMPS 2' X 4' Recessed Direct/Indirect Side-Mount 6" [152mm] 23-3/4" [603 mm] ENERGY DATA Input Watts: MOUNTING DATA LAMP CONFIGURATIONS 7/8" [22mm] K.O. (2) 6" [152mm] 6" [152mm] 20-1/2" [521mm] 23 3/4" [603mm] 5-5/16" [135mm] Luminaire Efficacy Rating LER = FL58 Catalog Number: 2RDI-S-228T5RP 23-3/4" [603mm] 6" [152mm] 19-5/8" [498mm] 5-5/16" [135mm] 47-11/16" [1211mm] 2-1/2" [64mm] 1-1/2" [38mm] 2-3/4" [70mm] 23-3/4" [603mm] COOPER LIGHTING Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $4.14 *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. 23-3/4" [603mm] **Consult Pre Sales Technical Support. CEILING COMPATIBILITY Wiring Access Plate 7/8" [22mm] K.O. (2) EB Ballast & STD Lamps 228T5 (68) 428T5 (136) 254T5 (120) 454T5 (240) G Grid/Lay-in Standard T Slot Grid ***See Drywall Frame Kit Accessory F Drywall Frame Kit Ceiling Type** Trim Type Exposed Grid Concealed T Slot Grid Flange G G or T G or T *** LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. ADF020610 Catalog Number: 2RDI-S-228T5RP-UNV-EBT1-U Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: F3 Notes: ISI13-9416 2RDI-S PHOTOMETRICS Coefficients of Utilization rc rw Candela Effective floor cavity reflectance 80% 70% 70 50 30 10 20% 50% 70 50 30 10 50 30 10 30% 10% 50 30 10 50 30 10 0% Angle 0 0 5 10 15 RCR 0 80 80 80 80 78 78 78 78 75 75 75 72 72 72 69 69 69 67 1 2 73 70 67 65 71 68 66 64 66 63 61 63 61 60 61 59 58 56 67 61 61 54 56 53 48 44 65 60 59 53 55 48 52 43 57 51 54 51 46 43 55 52 49 45 50 42 53 51 48 47 44 41 47 40 20 25 30 56 48 42 37 54 47 41 37 45 40 36 43 39 36 42 38 35 34 35 51 42 47 37 36 31 31 27 49 41 45 37 35 31 31 27 40 36 35 31 30 26 38 34 34 30 30 26 37 33 30 33 29 26 29 25 40 45 43 34 39 30 28 23 24 20 42 33 38 30 27 24 23 20 32 29 27 23 24 20 31 26 28 23 23 20 30 26 23 27 23 20 21 18 50 36 27 21 17 35 27 21 17 26 21 17 25 20 17 24 20 17 16 34 25 19 15 33 24 19 15 23 19 15 23 18 15 22 18 15 14 3 4 5 6 2RDI-S-228T5RP Electronic Ballast F28T5/835 Lamps 2900 Lumens Spacing criterion: (II) 1.3 x mounting height, (⊥) 1.3 x mounting height Efficiency 67.3% Test Report: 2RDIS228T5RP.IES 7 8 9 10 Zonal Lumen Summary Typical VCP Percentages Zone Lumens %Lamp %Fixture 0-30 991 1626 17.1 28.0 25.4 41.7 2917 3902 3602 50.3 67.3 67.3 74.7 100.0 100.0 0-40 0-60 0-90 0-180 Room Size (Ft.) 20 x 20 30 x 30 30 x 60 60 x 30 60 x 60 Height Along 8.5’ 10.0’ 67 75 61 66 59 61 61 58 64 58 Height Across 8.5’ 10.0’ 57 67 49 55 44 46 54 48 Across ⊥ 1269 Along II 1269 45° 1269 1263 1248 1260 1248 1266 1252 1222 1223 1228 1183 1132 1186 1137 1192 1148 1070 996 1079 1014 1096 1037 913 941 975 820 719 863 781 912 849 609 698 784 494 378 616 537 718 654 75 80 270 180 108 458 374 257 584 486 297 85 90 42 0 79 0 105 0 55 60 65 70 59 48 LER = FL58 Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $4.14 Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 4/13 ADF020610 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 2RDI-S-228T5RP-UNV-EBT1-U Type: F3 Notes: ISI13-9416 2RDI-S ORDERING INFORMATION SAMPLE NUMBER: 2RDI-S-228T5RP-120V-EBT1-U Width 2=2' Width Number of Lamps 2=2 Lamps 4= 4 Lamps Series RDI=Ovation Series (Recessed Direct/Indirect) Wattage 28T5=28W T5 (48") (1) 54T5=54W T5HO (48") (1) Trim Type Leave Blank=Grid/Lay-in (Standard) Lamp Position S=Side Mounted Lamps (1) Lamp Shield X=Solid Matte White RP=Round Perforated White Steel Options RIF1=Radio Interference Suppressor REP=Riveted Endplates LSC=Lamp Shield Cable ST=Semi-Specular Tannenbaum Ballast Type EBT =T5 or T5HO Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Standard Ballast Factor=1.0 Ballast/FactorType Voltage (1) 120V=120 Volt 277V=277 Volt 347V=347 Volt UNV=Universal Voltage 120-277 Options GL=Single Element Fuse GM=Double Element Fuse Lamps=Lamps installed Flex=Flex installed EL=Emergency Installed (2) NOTES: Products also available in non-US voltages and frequencies for international markets. An EQ Grid (3) Clip is recommended for all 9/16" ceiling systems. Four required per fixture. 2' x 2' and 2' x 4' Center Lamp (4) (5) Shield models only. .90 ballast factor available for 2 or 3 14W T5 or 28W T5 lamps only. 1-Lamp step dim(6) ming ballast in a Normal Ballast factor not available. 2-Lamp ballast will not operate 1-Lamp. 1-Lamp ballast in (7) a High Ballast factor not available. For a complete listing of Fifthlight Technology products and other solutions from (8) 0-10V ballast do not include DALI feature. Please select DALI ballast Cooper Controls, visit www.coopercontrol.com. (9) for use with Fifth Light system. Specification grade 0-10V dimming ballast are NEMA premium and CEE listed. They (10) are compatible with low mercury and energy saving lamps. Specification Grade 0-10V ballast not offered in 3 or 4(11) lamp versions. Standard 0-10V ballast not offered in 3 or 4-lamp versions. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. EBT N=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Normal Ballast Factor=.90 (4) EBT H=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. High Ballast Factor=1.15 (6) EBT NDIM=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, Normal Ballast Factor=.95-1.0 (5) EBT HDIM=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, High Ballast Factor=1.15 0-10V Dimming Ballasts (8) 5LTV5 =T5 0-10V Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 (11) 5LTVS5 =T5 0-10V Spec Grade Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 (9), (10) 5LTV5H =T5HO 0-10V Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 (11) 5LTVS5H =T5HO 0-10V Spec Grade Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 (9), (10) Packaging U=Unit Pack PALC=Job Pack, in carton ACCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips(2) DF-24-W=Drywall Frame Kit Fifth Light DALI Ballasts (7) 5LT5 =T5 DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 5LT5H =T5HO DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 Number of Ballasts 1=1 Ballast 2=2 Ballasts 3=3 Ballasts SHIPPING INFORMATION Catalog No. 2RDI-S-228T5RP 2RDI-S-428T5RP 2RDI-S-254T5RP 2RDI-S-454T5RP Wt. 25 lbs. 25 lbs. 25 lbs. 25 lbs. Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 4/13 ADF020610 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 2RDI-S-228T5RP-UNV-EBT1-U Type: F3 Notes: ISI13-9416 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 2GC-228T5A125-UNV-EBT1NDIM-U Type: F4 Notes: ISI13-9416 COOPER LIGHTING - METALUX ® DESCRIPTION The GC Series features a 4-3/4" deep para-contoured fixture housing, high reflectivity and optimum lamp to lens spacing. The series produces total uniformity of light in the luminous area and is compatible with all of today’s popular ceiling systems and is available with a number of options and accessories for application versatility. Type Catalog # Project Date Comments The specification luminaire is designed to offer maximum efficiency and performance for today’s unique interior specifications. The GC Series is an excellent choice for commercial office spaces, schools, hospitals or retail merchandising areas. Prepared by SPECIFICATION FEATURES Construction Electrical* H i n g i n g / L a t ch i n g 4-3/4" deep, para-contoured housing, die formed, prime cold rolled steel. Die embossed housing has full length die formed stiffeners for added strength. Deep “V” ballast/wireway cover easily removed without tools. Die formed captive lampholder bracket fully encloses lampholder wiring permitting easy lampholder replacement. Heavy endplates are securely attached with interlocking tabs and screws. Four auxiliary fixture end suspension points provided. KOs for continuous row wiring. Endplates have integral Grid-Lock feature for safety and convenience. Ballasts are CBM/ETL Class “P” and are positively secured by mounting bolts. Pressure lock lampholders. UL/CUL listed.** Suitable for damp locations. Positive cam action spring loaded steel latches with baked white enamel finish. Safety-lock T-hinges allow hinging and latching either side. Finish Frame/Shielding Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibitor. Lighting grade, baked white enamel finish. Die formed, heavy gauge, flat steel door with reinforced mitered corners and baked white enamel finish. Positive light seals. Light stabilized 100% virgin acrylic prismatic shielding. Standard #12 pattern. Optional shielding available. 2GC 228T5 254T5 428T5 454T5 2' X 4' TROFFER 2 OR 4 T5 LAMPS Specification Deep Troffer 4-3/4" [121mm] 23-3/4" [603mm] LAMP CONFIGURATIONS MOUNTING DATA 2 LAMP 2 LAMP Access Plate 7/8" [22mm] 7/8" [22mm] K.O. (2) 4-3/4" [121mm] 10-3/16" [259mm] 23-3/4" [603mm] 23-3/4" [603mm] 4 LAMP 4-3/4" [121mm] X=4-3/4" [121mm] 4-5/8" [119mm] 3" [77mm] 48" [1217mm] X X 5-3/4" [146mm] 23-3/4" [603mm] ENERGY DATA Input Watts: 7-7/8" [201mm] DOOR FRAMES GC F lat, White Steel EB Ballast & STD Lamps GCFA F lat, E xtruded White Alum inum GCRA D eep, R egressed, E xtruded White Alum inum 228T5 (59), 254T5 (114), 428T5 (118), 454T5 (226) *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. CEILING COMPATIBILITY G Grid/Lay-in Standard G Concealed T **Consult Pre Sales Technical Support. G Slot Grid F Aluminum Flange Trim With Supporting Swing Gates MZ Modular Trim With Supporting Swing Gates Ceiling Type Trim Type Exposed Grid Concealed T Slot Grid Flange Concealed “T” or ”Z“ Metal Pan G G G F MZ MZ (Verify compatibility/ consult Pre Sales Technical Support.) LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. ADF111339 COOPER LIGHTING Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 2GC-228T5A125-UNV-EBT1NDIM-U Type: F4 Notes: ISI13-9416 2GC 2' x 4' T5 ORDERING INFORMATION SAMPLE NUMBER: 2GC-228T5A-UNV-EBT1-U Rating Blank= Standard NY=New York City Rated ATW-SW4= Chicago Rated Number of Lamps 2=2 Lamps 4=4 Lamps Width 2=2' Width Shielding A=#12 Acrylic Pattern A125=#12 Pattern Acrylic (.125" Thickness) A19/156=#19 Pattern Acrylic (.156" Thickness) DA=Dropped Dish Matte White Acrylic IMA48=Injection Molded Acrylic (.150" Thickness) PB1S=1/2" x 1/2" x 1/2" Silver Parabolic Louver (Styrene) Trim Type G=Grid/Lay-in (Standard)(1) G=Concealed T (6) G=Slot Grid (6) F=Aluminum Flange Trim (5) MZ=Modular Trim EMZ=Modular Trim (Extended Swing Arm) Series C=Specification Deep Troffer Door Frame Standard=Flat White Steel Door (Leave Blank) FA=Flush White Extruded Aluminum c/w Spring Latch RA=Regressed White Extruded Aluminum (3/8") FAN=Flush Natural Anodized Extruded Aluminum RAN=Regressed Natural Anodized Extruded Aluminum (3/8") FAB=Flush Black Extruded Aluminum RAB=Regressed Black Extruded Aluminum (3/8") (1) Options GL=Single Element Fuse GM=Double Element Fuse Flex=Flex Installed (Reference Flex ordering information) EL=Emergency Installed (4) Wattage 28T5=28W T5 (48") 54T5=54W T5HO (48") Option – Aluminum Flange Trim (5) Blank=SW (Single White) Type Color ‘S’ Single ‘N’ Natural ‘R’ In Row ‘W’ White ‘E’ End of Row Ballast Type EBT =T5 or T5HO Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Standard Ballast Factor=1.0 Ballast/FactorType EBT N=T5 Electronic (7) Program Rapid Start. Total Harmonic Distortion < 10%. Normal Ballast Factor=.90 EBT H=T5 Electronic (8) Program Rapid Start. Total Harmonic Distortion < 10%. High Ballast Factor=1.15 EBT NDIM=T5 Electronic (10) Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, Normal Ballast Factor=.95-1.0 EBT HDIM=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, High Ballast Factor=1.15 Options RLS=Rotor Lock Socket (T8 Lamp only) RIF1=Radio Interference Suppressor 20GA/REP=20 Gauge Housing w/Riveted End Plate PAF=Painted After Fabrication Packaging U=Unit Pack PAL=Palletized Uncartoned Fixtures PALC=Palletized Fixtures in Carton ACCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips(1) Fifthlight Ballasts (9) 5LT5 =T5 DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 5LT5H =T5HO DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 Voltage (2) 120V=120 Volt 277V=277 Volt 347V=347 Volt UNV=Universal Voltage 120-277 (3) Number of Ballasts 1=1 Ballast 2=2 Ballasts 3=3 Ballasts (2) (3) NOTES: An EQ Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. Products also available in non-US voltages and frequencies for international markets. Not available when specifying (4) (5) emergencies, voltage must be specific. Fixtures equipped with “EL” option may require a 5-1/2" housing depth. If installing in field, must use low profile battery pack. Specify row configuration, type in catalog number (6) (7) (8) (9) when ordering complete fixture. Louver is recessed by 5/16" in Concealed T or Slot Grid. .90 ballast factor available for 2 or 3 14W T5 or 28W T5 lamps only. 1-Lamp ballast in a High Ballast factor not available. For (10) 1-Lamp step dimming ballast in a Normal Ballast factor not available. 2-Lamp ballast will not opera complete listing of Fifthlight Technology products and other solutions from Cooper Controls, visit www.coopercontrol.com. ate 1-Lamp. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. SHIPPING INFORMATION Catalog No. Wt. 2GC-228T5A 2GC-254T5A 2GC-428T5A 2GC-454T5A 29 lbs. 29 lbs. 32 lbs. 32 lbs. Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 8/12 ADF111339 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 2GC-228T5A125-UNV-EBT1-U Type: F5 Notes: ISI13-9416 COOPER LIGHTING - METALUX ® DESCRIPTION The GC Series features a 4-3/4" deep para-contoured fixture housing, high reflectivity and optimum lamp to lens spacing. The series produces total uniformity of light in the luminous area and is compatible with all of today’s popular ceiling systems and is available with a number of options and accessories for application versatility. Type Catalog # Project Date Comments The specification luminaire is designed to offer maximum efficiency and performance for today’s unique interior specifications. The GC Series is an excellent choice for commercial office spaces, schools, hospitals or retail merchandising areas. Prepared by SPECIFICATION FEATURES Construction Electrical* H i n g i n g / L a t ch i n g 4-3/4" deep, para-contoured housing, die formed, prime cold rolled steel. Die embossed housing has full length die formed stiffeners for added strength. Deep “V” ballast/wireway cover easily removed without tools. Die formed captive lampholder bracket fully encloses lampholder wiring permitting easy lampholder replacement. Heavy endplates are securely attached with interlocking tabs and screws. Four auxiliary fixture end suspension points provided. KOs for continuous row wiring. Endplates have integral Grid-Lock feature for safety and convenience. Ballasts are CBM/ETL Class “P” and are positively secured by mounting bolts. Pressure lock lampholders. UL/CUL listed.** Suitable for damp locations. Positive cam action spring loaded steel latches with baked white enamel finish. Safety-lock T-hinges allow hinging and latching either side. Finish Frame/Shielding Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibitor. Lighting grade, baked white enamel finish. Die formed, heavy gauge, flat steel door with reinforced mitered corners and baked white enamel finish. Positive light seals. Light stabilized 100% virgin acrylic prismatic shielding. Standard #12 pattern. Optional shielding available. 2GC 228T5 254T5 428T5 454T5 2' X 4' TROFFER 2 OR 4 T5 LAMPS Specification Deep Troffer 4-3/4" [121mm] 23-3/4" [603mm] LAMP CONFIGURATIONS MOUNTING DATA 2 LAMP 2 LAMP Access Plate 7/8" [22mm] 7/8" [22mm] K.O. (2) 4-3/4" [121mm] 10-3/16" [259mm] 23-3/4" [603mm] 23-3/4" [603mm] 4 LAMP 4-3/4" [121mm] X=4-3/4" [121mm] 4-5/8" [119mm] 3" [77mm] 48" [1217mm] X X 5-3/4" [146mm] 23-3/4" [603mm] ENERGY DATA Input Watts: 7-7/8" [201mm] DOOR FRAMES GC F lat, White Steel EB Ballast & STD Lamps GCFA F lat, E xtruded White Alum inum GCRA D eep, R egressed, E xtruded White Alum inum 228T5 (59), 254T5 (114), 428T5 (118), 454T5 (226) *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. CEILING COMPATIBILITY G Grid/Lay-in Standard G Concealed T **Consult Pre Sales Technical Support. G Slot Grid F Aluminum Flange Trim With Supporting Swing Gates MZ Modular Trim With Supporting Swing Gates Ceiling Type Trim Type Exposed Grid Concealed T Slot Grid Flange Concealed “T” or ”Z“ Metal Pan G G G F MZ MZ (Verify compatibility/ consult Pre Sales Technical Support.) LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. ADF111339 COOPER LIGHTING Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 2GC-228T5A125-UNV-EBT1-U Type: F5 Notes: ISI13-9416 2GC 2' x 4' T5 ORDERING INFORMATION SAMPLE NUMBER: 2GC-228T5A-UNV-EBT1-U Rating Blank= Standard NY=New York City Rated ATW-SW4= Chicago Rated Number of Lamps 2=2 Lamps 4=4 Lamps Width 2=2' Width Shielding A=#12 Acrylic Pattern A125=#12 Pattern Acrylic (.125" Thickness) A19/156=#19 Pattern Acrylic (.156" Thickness) DA=Dropped Dish Matte White Acrylic IMA48=Injection Molded Acrylic (.150" Thickness) PB1S=1/2" x 1/2" x 1/2" Silver Parabolic Louver (Styrene) Trim Type G=Grid/Lay-in (Standard)(1) G=Concealed T (6) G=Slot Grid (6) F=Aluminum Flange Trim (5) MZ=Modular Trim EMZ=Modular Trim (Extended Swing Arm) Series C=Specification Deep Troffer Door Frame Standard=Flat White Steel Door (Leave Blank) FA=Flush White Extruded Aluminum c/w Spring Latch RA=Regressed White Extruded Aluminum (3/8") FAN=Flush Natural Anodized Extruded Aluminum RAN=Regressed Natural Anodized Extruded Aluminum (3/8") FAB=Flush Black Extruded Aluminum RAB=Regressed Black Extruded Aluminum (3/8") (1) Options GL=Single Element Fuse GM=Double Element Fuse Flex=Flex Installed (Reference Flex ordering information) EL=Emergency Installed (4) Wattage 28T5=28W T5 (48") 54T5=54W T5HO (48") Option – Aluminum Flange Trim (5) Blank=SW (Single White) Type Color ‘S’ Single ‘N’ Natural ‘R’ In Row ‘W’ White ‘E’ End of Row Ballast Type EBT =T5 or T5HO Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Standard Ballast Factor=1.0 Ballast/FactorType EBT N=T5 Electronic (7) Program Rapid Start. Total Harmonic Distortion < 10%. Normal Ballast Factor=.90 EBT H=T5 Electronic (8) Program Rapid Start. Total Harmonic Distortion < 10%. High Ballast Factor=1.15 EBT NDIM=T5 Electronic (10) Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, Normal Ballast Factor=.95-1.0 EBT HDIM=T5 Electronic Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, High Ballast Factor=1.15 Options RLS=Rotor Lock Socket (T8 Lamp only) RIF1=Radio Interference Suppressor 20GA/REP=20 Gauge Housing w/Riveted End Plate PAF=Painted After Fabrication Packaging U=Unit Pack PAL=Palletized Uncartoned Fixtures PALC=Palletized Fixtures in Carton ACCESSORIES EQ-CLIP-U=T-BAR Safety Earthquake Clips(1) Fifthlight Ballasts (9) 5LT5 =T5 DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 5LT5H =T5HO DALI Program Rapid Start. Total Harmonic Distortion < 10%. Ballast Factor 1.0 Voltage (2) 120V=120 Volt 277V=277 Volt 347V=347 Volt UNV=Universal Voltage 120-277 (3) Number of Ballasts 1=1 Ballast 2=2 Ballasts 3=3 Ballasts (2) (3) NOTES: An EQ Grid Clip is recommended for all 9/16" ceiling systems. Four required per fixture. Products also available in non-US voltages and frequencies for international markets. Not available when specifying (4) (5) emergencies, voltage must be specific. Fixtures equipped with “EL” option may require a 5-1/2" housing depth. If installing in field, must use low profile battery pack. Specify row configuration, type in catalog number (6) (7) (8) (9) when ordering complete fixture. Louver is recessed by 5/16" in Concealed T or Slot Grid. .90 ballast factor available for 2 or 3 14W T5 or 28W T5 lamps only. 1-Lamp ballast in a High Ballast factor not available. For (10) 1-Lamp step dimming ballast in a Normal Ballast factor not available. 2-Lamp ballast will not opera complete listing of Fifthlight Technology products and other solutions from Cooper Controls, visit www.coopercontrol.com. ate 1-Lamp. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. SHIPPING INFORMATION Catalog No. Wt. 2GC-228T5A 2GC-254T5A 2GC-428T5A 2GC-454T5A 29 lbs. 29 lbs. 32 lbs. 32 lbs. Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 8/12 ADF111339 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: ORM-F-24-428T5-UNV-A125-EB52 Type: F6 Notes: ISI13-9416 FAIL-SAFE D ES CR IPTIO N Fail-Safe's development of the asymmetric/symmetric ORM represents the latest technology in precise control of light to the surgical task and to the surrounding area, and allows multi-level lighting without changing the character of the lighting distribution. The ORM's high efficiency and precise lighting distribution delivers high illumination to the surgical task area. Quality and value are maintained to provide the best performance solution for your design needs. ® Type Catalog # Project Date Comments Prepared by S P EC IFIC A TIO N FEA TU R ES Moun t in g D o o r Fra m e Ballast Recessed grid or flange, ceiling mount. Standard 1" or 1 1/2" NEMA Type "G" ceiling systems. Surfacemount available. Cold rolled steel, painted white, flat inset door standard. Optional white painted extruded aluminum, anodized extruded aluminum, and brushed stainless steel, flat inset. Electronic Class P, CBM/ETL ballast. Lam p s By others. G a sk et Hous in g Closed-cell silicone gasket seals door to housing. Die-formed, 20 ga. cold-rolled steel. Seam-welded construction, absent of holes. Optional brushed or painted stainless steel and painted white aluminum. F in ish High gloss, electrostatically applied, white powder coat finish, average minimum reflectance 92%. Lens Door is hinged to the housing with two stainless steel aircraft cables. Continuous piano hinge optional. One-piece asymmetric/symmetric acrylic lens. RFI 3/8" square metalized grid, grounded to housing. Clear, smooth acrylic lens below primary lens for ease of cleaning. Silicone gasket around the acrylic lens perimeter. Other lenses available, refer to Ordering Information. Captive stainless steel Philips head screws secure door frame to the housing. MIL-STD-461F available with standard electronic ballasts and dimming ballasts, when ordered with MIL1, MIL2 or MIL3 Option (ASY/SYM/RFI or 89BC lens required). Results furnished upon request. See Options for exact catalog nomenclature. ORM L a be l s UL/cUL listed for wet location. IP65 rated. Door Fas te n e r s Com pl i a nc e 2x2 2x4 1x4 Fluorescent Healthcare: Operating Room RECESSED FLANGE RECESSED GRID SURFACE Wet Location NOTE: “MIL” box required for MILSTD461F compliance, adds 2" to overall fixture height, all sizes and mounting configurations. See Options for “MIL” specification. IP65 rated 11-11/16" [297mm] 23-11/16" [602mm] 4-3/4" [120mm] 4-3/4" [120mm] ORM-F 2x2/2x4 CROSS-SECTION ORM-F 1x4 CROSS-SECTION 2x2 ceiling cut-out dimensions: 24" (W) x 24-5/16" (L) 2x4 ceiling cut-out dimensions: 24" (W) x 48-5/16" (L) 1x4 ceiling cut-out dimensions: 12" (W) x 48-5/16" (L) 23-11/16" [602mm] 11-11/16" [297mm] 4-1/16" [103mm] 4-1/16" [103mm] ORM-G 2x2/2x4 CROSS-SECTION ORM-G 1x4 CROSS-SECTION 24" [610mm] 12" [305mm] 4-11/16" [119mm] 4-1/16" [119mm] ORM-S 2x2/2x4 CROSS-SECTION ORM-S 1x4 CROSS-SECTION Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADC091967 2012-10-22 08:11:26 Catalog Number: ORM-F-24-428T5-UNV-A125-EB52 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: F6 Notes: ISI13-9416 ORM ORDERING INFORMATION S A M P L E N U M B E R : O R M - G - 2 4 - 6 3 2 - U N V - A S Y / S Y M / R F I - E B 8 3-ALXP-SHN-CPH Product Family Ceiling Ty p e Width Lamp Ty p e Vo l t a g e Lens Ballast Housing Options Door/Finish Options Options ORM ORM = Operating Room/ Surgical 120=120V 277=277V 347=347V UNV =120V-277V ASY/SYM=Asymmetric/Symmetric Lens, with 0.125” Clear Acrylic Lens Underlay ASY/SYM/RFI=Asymmetric/Symmetric Lens with RFI grid, with 0.125” Clear Acrylic Lens Underlay A125 =Pattern 12 acrylic, 0.125” thick, inverted KSH25= Bat Wing Distribution, with 0.125” Clear Acrylic Lens Underlay 89BC= 0.125” thick KSH19 RFI Symmetrical, with 0.125” Clear Acrylic Lens Underlay IK12=Pattern 12 Acrylic, 0.110" thick G=Grid (1” & 1-1/2” T-Bar) F=Flange (Swing-out brackets standard) S =Surface 1, 6 24 =24” Wide 12 =12” Wide 2x2 10 2x4 617 =(6) 17W T8 Lamps 632=(6) 32W T8 Lamps 614 =(6) 14W T5 Lamps 624 =(6) 24W T5HO Lamps 417 =(4) 17W T8 Lamps 414 =(4) 14W T5 Lamps 424=(4) 24W T5HO Lamps 317 =(3) 17W T8 Lamps 314=(3) 14W T5 Lamps 324 =(3) 24W T5HO Lamps 217=(2) 17W T8 Lamps 240 BX =(2) 40W Biaxial Lamps 250 BX =(2) 50W Biaxial Lamps 255BX=(2) 55W Biaxial Lamps 340 BX =(3) 40W Biaxial Lamps 350 BX =(3) 50W Biaxial Lamps 355BX =(3) 55W Biaxial Lamps 628T8=(6) 28W T8 Lamps 628=(6) 28W T5 Lamps 440BX=(4) 40W Biaxial Lamps 450BX=(4) 50W Biaxial Lamps 455BX=(4) 55W Biaxial Lamps NOTES: 1 2 3 4 5 6 7 8 9 654=(6) 54W T5HO Lamps 432=(4) 32W T8 Lamps 428T8=(4) 28W T8 Lamps 428=(4) 28W T5 Lamps 454=(4) 54W T5HO Lamps 332=(3) 32W T8 Lamps Electronic Ballast EB81=(1) Ballast, Instant Start, T8 lamps EB82=(2) Ballasts, Instant Start, T8 lamps EB83 =(3) Ballasts, Instant Start, T8 lamps ER81=(1) Ballast, Rapid Start, T8 lamps ER82=(2) Ballasts, Rapid Start, T8 lamps ER83 =(3) Ballasts, Rapid Start, T8 lamps EB51=(1) Ballast, T5 lamps EB52=(2) Ballasts, T5 lamps EB53=(3) Ballasts, T5 lamps EBX1=(1) Ballast, BX lamps EBX2=(2) Ballasts, BX lamps For dimming ballast, specify quantity and catalog number. Blank=Die-formed, cold rolled steel, white powder coat finish, flat inset door for recessed unit. Overlapping, steel, white powder coat for surface. 1, 2 ALP=Die-formed Aluminum, white powder coat finish, flat inset door 1, 2 SSP=Stainless Steel, white powder coat finish. flat inset door 1, 2 SSN=Stainless Steel Brushed finish, flat inset door 1, 2 ALX=Extruded Alumium, Clear Anodized finish, flat inset door 1, 2, 3 ALXP=Extruded Aluminum, white powder coat finish, flat inset door 1, 2 328T8=(3) 28W T8 Lamps 328=(3) 28W T8 Lamps 328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps 232=(2) 32W T8 Lamps 1x4 332=(3) 32W T8 Lamps 328T8 =(3) 28W T8 Lamps 328=(3) 28W T5 Lamps 354=(3) 54W T5HO Lamps 232=(2) 32W T8 Lamps 228T8=(2) 28W T8 Lamps 228=(2) 28W T5 Lamps 228=(2) 28W T8 Lamps 254=(2) 54W T5HO Lamps Blank=20 ga. Cold Rolled Steel, white powder coat finish SHP=Stainless Steel Housing, white powder coat finish SHN=Stainless Steel Housing, Brushed finish ALH=Aluminum Housing, white powder coat finish EL4 =EM Pack, T8, BX 4 EL5 =EM Pack, T5, T5HO 4 GLR =Fuse and Holder 1/RIF=1 Radio Interference Filter 5, 9 2/RIF=2 Radio Interference Filters 5, 9 3/RIF=3 Radio Interference Filters 5, 9 CPH=Continuous Piano Hinge 2 SW=Sealed Wireway TAD =Top Access Door (door accessible from plenum only) 7 TED =Top Entry Door ( door accessible from room side) 7 EQ =Earthquake Clips GEN1 =Interim lighting for generator back-up systems; 1-lamp operation 12 GEN3 =Interim lighting for generator back-up systems; 2- or 3-lamp operation, instant start at ballast only 12 AM = Anti-microbial finish (all painted parts) MIL1 = Compliance to MILSTD461F for standard ballasts and 8, 11 dimming ballasts, single circuit. MIL2 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 2 circuits. 8, 11 MIL3 = Compliance to MILSTD461F for standard ballasts and dimming ballasts, 3 circuits. 8, 11 Surface-mount door is overlapping, steel, with white powder coat finish. Not available with ALXP, ALX, SSP, SSN. Recessed door is flat inset standard. CPH available with ALXP or ALX options only. ALX door option not IP65 rated. Specify voltage. For (1) RIF, specify as 1/RIF, for (2) RIFs, specify as 2/RIF, (3) RIFs, specify as 3/RIF. MIL spec not available for surface mount. 36” opening for MIL spec. Wiring box placed on fixture housing, adding 2” to fixture height. RIF does not ensure MILSTD461F rating. MIL1, MIL2, MIL3 ensures MILSTD461F rating. 10 Multiple ballasts (standard and EM) may require ballast(s) to be mounted in a back-box on the fixture housing, which will increase fixture height. Consult factory for details. 11 For MILSTD461F compliance, the ASY/SYM/RFI or 89BC lens is required, along with either MIL1, MIL2 or MIL3 option. Radio Interference Filters (RIF) are not required. 12 GEN1 and GEN3 not available with T5 lamps. Consult factory for T8 AC ballast compatibility. P H O T O M E TR I C S Please visit our website @ www cooperlighting com Specifications and dimensions subject to change without notice. 'BJM4BGFt$VTUPNFS'JSTU$FOUFSt)JHIXBZ4PVUIt1FBDIUSFF$JUZ ("t5&-t'"9 ADC091967 2012-10-22 08:11:26 Catalog Number: 700FJTLT12S Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: P2 Notes: ISI13-9416 L O W - V O L T A G E H E A D S Tilt Head DESCRIPTION Flexible minimalist head with multiple accessory options; rotates 360°, pivots 90°. Low-voltage, MR16 lamp of up to 50 watts (not included). INSTALLATION Socket terminates with FreeJack male connector, which may be installed into a system connector. Elements ordered with a system prefix include a connector for that system. ACCESSORIES & OPTICAL CONTROLS Bell Shade, Belladonna Shade, Cone Glass Shield, Cone Onyx Shield, Dichroic Glass Shield, Firebird Glass Shield, Flute Glass Shield Accessory, Hurricane Glass Shield Accessory, Lil Egypt Shade, Martini Glass Shield, Mission Glass Shield Accessory, Prism Glass Shield, Round Glass Shield, Scavo Glass Shade, Soda Glass Shade, Sugar Accessory, Tinkerbell Shade, Tinkerbell Shade With Integrated Lens Holder WEIGHT 0.7lb / 0.32kg ± ORDERING INFORMATION 700 SYSTEM TLT LENGTH (A) FJ FREEJACK MP MONOPOINT MO MONORAIL MO2 TWO-CIRCUIT MONORAIL WMO WALL MONORAIL 06 12 18 2" 6" 12" 18" FINISH Z ANTIQUE BRONZE C CHROME S SATIN NICKEL Note: MP includes 4" Round Flush Canopy. 700 ____ TLT ____ ____ FIXTURE TYPE: ________________________________________________ 7400 Linder Avenue Skokie, Illinois 60077 Tech Lighting, L.L.C. T 847.410.4400 F 847.410.4500 JOB NAME: ________________________________________________ NOTES: ________________________________________________ ________________________________________________ ________________________________________________ ©2013 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification. Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 700FJTLT12S Type: P2 Notes: ISI13-9416 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 700LICOFR Type: P2 Notes: ISI13-9416 { ~ ~ { ~ > > ~ '!*+;; *< # $ + = > ? ^ ` {| ` } | } | } { } ~ } ~ } ~ } { ~> >{ >{ ~} !$%% % > { >{~ > } > > $ > } > $$ Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 700LICOFR Type: P2 Notes: ISI13-9416 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 700FJ4RFS Type: P2 Notes: ISI13-9416 F R E E J A C K FreeJack 4" Round Flush Canopy DESCRIPTION Mounts to a standard 4" junction box with round plaster ring (provided by electrician). Electronic transformer (included) fits in junction box. One FreeJack port; for ceiling or wall. INSTALLATION This product can mount to either a 4" square electrical box with round plaster ring or an octagonal electrical box (not included). Transformer (included) fits in junction box. For ceiling or wall. If wall mounting, head should be no longer than 6". OTHER For use with any 12 or 24 volt halogen FreeJack pendant or head (sold separately). WEIGHT 0.8lb / 0.36kg ± ORDERING INFORMATION 700FJ4RF FINISH Z B C S W VOLTAGE ANTIQUE BRONZE BLACK CHROME SATIN NICKEL WHITE 120V IN/12V OUT 024 120V IN/24V OUT 277 277V IN/12V OUT 700FJ4RF ____ ____ FIXTURE TYPE: ________________________________________________ 7400 Linder Avenue Skokie, Illinois 60077 Tech Lighting, L.L.C. T 847.410.4400 F 847.410.4500 JOB NAME: ________________________________________________ NOTES: ________________________________________________ ________________________________________________ ________________________________________________ ©2013 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification. Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: 700FJ4RFS Type: P2 Notes: ISI13-9416 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: CD6S213E/6CS226W0LI/DTC6RO/ HB26 Type: R1 Notes: ISI13-9416 PORTFOLIO ® DESCRIPTION High efficiency, low brightness 6" aperture shallow housing for use with 18 or 26W double twin tube compact fluorescent lamps. Standard features include low iridescent finish on all reflector colors and venting to ensure maximum lamp life and lumen output. Optics offer unparalleled performance with glare free lighting and smooth beam. Lensed and crossblade reflectors are interchangeable within the same housing. Type Catalog # Project Date Comments Prepared By S P E C I F I C AT I O N F E AT U R E S Mechanical Housing Mounting Frame One piece precision die cast aluminum 3/4" deep collar accommodates varying dimensions of ceiling materials. Universal Mounting Bracket Accepts 1/2" EMT, C Channel, T bar fasteners, and bar hangers. Adjusts 5" vertically from above or below ceiling. Conduit Fittings Die cast screw tight connectors. Junction Box Listed for eight #12AWG (four in, four out) 90°C conductors feed through branch wiring. 1/2" and two 3/4" pry outs. Positioned to allow straight conduit runs. Access to junction box by removing reflector. Optical Reflector .050 thick aluminum, available in a variety of Alzak® finishes. Precision cut and assembled crossblades are finished to match reflector. Positive reflector spring mounting pulls trim tight to ceiling. Rotary Lock Socket 4-pin base with fatigue free stainless steel lamp spring ensures positive lamp retention. 13W Lamp G24q1 18W Lamp G24q2 26W Lamp G24q3 Trim Ring Options Self flanged or molded white trim ring. Rimless trim ring accessory available. Electronic Ballast with Quick Disconnect Electronic ballast provides full light output and rated lamp life. Provides flicker free and noise free operation and starting. End of lamp life protection is standard. Trim Retention Lower reflector is retained with two torsion springs holding the flange tightly to the ceiling. Socket Connector One piece die cast aluminum connection allows venting for maximum thermal performance. Labels cULus listed, standard damp label. Meets IECC, ASHRAE,and Title 24 commercial standards. CD6S226 CD6S218 CD6S213 6CS226W 13W, 18W or 26W DTT Compact Fluorescent 6" Shallow Horizontal Wide Beam Downlight 5-1/8" [130mm] ENERGY DATA Power Factor: > 0.99 THD: < 10% Min. Starting Temperature: 0º F (-18º C) Sound Rating: Class A standards (2) 13W DTT Ballast 120V Input Watts: 31 Line Amps: 0.26 277V Input Watts: 31 Line Amps: 0.12 (2) 18W DTT Ballast Ø 6-3/8" [162mm] 120V Input Watts: 37 Line Amps: 0.32 277V Input Watts: 37 Line Amps: 0.14 Sound Rating: Class A standards Ø 7-1/4" [184mm] (2) 26W Triple Ballast Ø 7-3/4" [197mm] 120V Input Watts: 50 Line Amps: 0.45 277V Input Watts: 50 Line Amps: 0.20 To p V i e w 17-23/32" [450mm] 11-3/4" [299mm] 14-3/16" [360mm] 13-23/32" [348mm] (with EM option) Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADP121221 2013-03-21 Catalog Number: CD6S213E/6CS226W0LI/DTC6RO/ HB26 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: R1 Notes: ISI13-9416 PORTFOLIO ® O R D E R I N G I N F O R M AT I O N Example: CD6S218E 6CS226W1LI1 Housing Ballast CD6S226 = 6" horizontal shallow 2-lamp 26W DTT CD6S218 = 6" horizontal shallow 2-lamp 18W DTT CD6S213 = 6" horizontal shallow 2-lamp 13W DTT Options E = 120/277V 50/60 Hz Electronic 3E = 347V Electronic D5LT = 120-277V Fifth Light (DALI) Dimming 3 3D5LT = 347V Fifth Light (DALI) Dimming 3 D = 120-277V Dimming, Lutron Ecosystem 3 Tri m s CP = Chicago Plenum EM = Emergency Module with remote test switch2 Finish 6CS226W1 = 6" wide beam reflector self flanged 6CS226W0 = 6" wide beam reflector polymer trim ring Option WF = White Painted Alzak® Finishes Flange LI = Specular Clear H = Semi-Specular Clear WMH = Warm Haze G = Gold WH = Wheat WHH = Wheat Haze GP = Graphite GPH = Graphite Haze B = Black Painted FInishes W = Gloss White WB = White Baffle (polymer trim ring only) BB = Black Baffle (polymer trim ring only) Ac c e s s o ri e s HB26 = C Channel Bar Hangers, 26" Long, Pair HB50 = C Channel Bar Hangers, 50" Long, Pair TRRC6P = White Rimless Trim Ring1 FK5 = 5 Amp Field Installable Fuse Kit 300V Max RMB22 = Wood Joist Bar Hanger, 22" Long, Pair TRMC6 = CFL Metal Trim Ring1 DTC6 = 6" CFL Deco Trim1 Notes: 1 Order trim with polymer trim ring. 2 Not available with Chicago Plenum. 3 Not available with 13W. (Consult specification sheet for ordering information and options). P H OTO M E T R I C S Candela Distribution Candlepower Distribution Curve Downlight 90˚ 75˚ 210 Test No. P13407 CD6S226E 6CS226W1LI Lumens = 2400 Efficiency = 58.1% Lamp = 18W DTT SC = 1.36 - 1.58 60˚ Cone of Light 420 45˚ 630 0° 15° 30° 0° 90° Distance Fixture to Lighted Plane Initial Footcandles at Nadir 5.5' 7.5' 8' 10' 12' 19 10 9 6 4 L/W 7' 9.5' 10.2' 12.8' 15.4' 8' 11' 11.6' 14.6' 17.6' 90˚ 75˚ 300 Test No. P13408 CD6S226E 6CS226W1LI Lumens = 3400 Efficiency = 58.3% Lamp = 26W DTT SC = 1.39 - 1.56 60˚ Cone of Light 600 45˚ 900 0° 15° 0° 90° 30° Candela 0 5 15 25 35 45 55 65 75 85 90 524 527 533 510 467 381 204 24 0 0 0 Candela Distribution Candlepower Distribution Curve Downlight Degrees Vertical Distance Fixture to Lighted Plane Initial Footcandles at Nadir 5.5' 7.5' 8' 10' 12' 27 14 13 8 6 L/W 7.1' 9.8' 10.4' 13' 15.6' 8' 10.8' 11.6' 14.6' 17.4' Degrees Vertical Candela 0 5 15 25 35 45 55 65 75 85 90 744 740 767 763 733 609 321 32 4 0 0 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-180 0-180 Lumens 492 822 1357 1396 0 1396 %Fixture 35.3 58.9 97.2 100.0 0.0 100.0 Luminance Average Candela/M2 Degrees Avg. 0° Luminance 45 55 65 75 85 26156 17265 2757 0 0 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-180 0-180 Lumens 694 1163 1929 1983 0 1983 %Fixture 35.0 58.6 97.3 100.0 0.0 100.0 Luminance Average Candela/M2 Degrees Avg. 0° Luminance 45 55 65 75 85 Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. 41808 27167 3676 750 0 ADP121221 2013-03-21 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: CD6S213E/6CS226W1LI/HB26 Type: R2 Notes: ISI13-9416 PORTFOLIO ® DESCRIPTION High efficiency, low brightness 6" aperture shallow housing for use with 18 or 26W double twin tube compact fluorescent lamps. Standard features include low iridescent finish on all reflector colors and venting to ensure maximum lamp life and lumen output. Optics offer unparalleled performance with glare free lighting and smooth beam. Lensed and crossblade reflectors are interchangeable within the same housing. Type Catalog # Project Date Comments Prepared By S P E C I F I C AT I O N F E AT U R E S Mechanical Housing Mounting Frame One piece precision die cast aluminum 3/4" deep collar accommodates varying dimensions of ceiling materials. Universal Mounting Bracket Accepts 1/2" EMT, C Channel, T bar fasteners, and bar hangers. Adjusts 5" vertically from above or below ceiling. Conduit Fittings Die cast screw tight connectors. Junction Box Listed for eight #12AWG (four in, four out) 90°C conductors feed through branch wiring. 1/2" and two 3/4" pry outs. Positioned to allow straight conduit runs. Access to junction box by removing reflector. Optical Reflector .050 thick aluminum, available in a variety of Alzak® finishes. Precision cut and assembled crossblades are finished to match reflector. Positive reflector spring mounting pulls trim tight to ceiling. Rotary Lock Socket 4-pin base with fatigue free stainless steel lamp spring ensures positive lamp retention. 13W Lamp G24q1 18W Lamp G24q2 26W Lamp G24q3 Trim Ring Options Self flanged or molded white trim ring. Rimless trim ring accessory available. Electronic Ballast with Quick Disconnect Electronic ballast provides full light output and rated lamp life. Provides flicker free and noise free operation and starting. End of lamp life protection is standard. Trim Retention Lower reflector is retained with two torsion springs holding the flange tightly to the ceiling. Socket Connector One piece die cast aluminum connection allows venting for maximum thermal performance. Labels cULus listed, standard damp label. Meets IECC, ASHRAE,and Title 24 commercial standards. CD6S226 CD6S218 CD6S213 6CS226W 13W, 18W or 26W DTT Compact Fluorescent 6" Shallow Horizontal Wide Beam Downlight 5-1/8" [130mm] ENERGY DATA Power Factor: > 0.99 THD: < 10% Min. Starting Temperature: 0º F (-18º C) Sound Rating: Class A standards (2) 13W DTT Ballast 120V Input Watts: 31 Line Amps: 0.26 277V Input Watts: 31 Line Amps: 0.12 (2) 18W DTT Ballast Ø 6-3/8" [162mm] 120V Input Watts: 37 Line Amps: 0.32 277V Input Watts: 37 Line Amps: 0.14 Sound Rating: Class A standards Ø 7-1/4" [184mm] (2) 26W Triple Ballast Ø 7-3/4" [197mm] 120V Input Watts: 50 Line Amps: 0.45 277V Input Watts: 50 Line Amps: 0.20 To p V i e w 17-23/32" [450mm] 11-3/4" [299mm] 14-3/16" [360mm] 13-23/32" [348mm] (with EM option) Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADP121221 2013-03-21 Catalog Number: CD6S213E/6CS226W1LI/HB26 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: R2 Notes: ISI13-9416 PORTFOLIO ® O R D E R I N G I N F O R M AT I O N Example: CD6S218E 6CS226W1LI1 Housing Ballast CD6S226 = 6" horizontal shallow 2-lamp 26W DTT CD6S218 = 6" horizontal shallow 2-lamp 18W DTT CD6S213 = 6" horizontal shallow 2-lamp 13W DTT Options E = 120/277V 50/60 Hz Electronic 3E = 347V Electronic D5LT = 120-277V Fifth Light (DALI) Dimming 3 3D5LT = 347V Fifth Light (DALI) Dimming 3 D = 120-277V Dimming, Lutron Ecosystem 3 Tri m s CP = Chicago Plenum EM = Emergency Module with remote test switch2 Finish 6CS226W1 = 6" wide beam reflector self flanged 6CS226W0 = 6" wide beam reflector polymer trim ring Option WF = White Painted Alzak® Finishes Flange LI = Specular Clear H = Semi-Specular Clear WMH = Warm Haze G = Gold WH = Wheat WHH = Wheat Haze GP = Graphite GPH = Graphite Haze B = Black Painted FInishes W = Gloss White WB = White Baffle (polymer trim ring only) BB = Black Baffle (polymer trim ring only) Ac c e s s o ri e s HB26 = C Channel Bar Hangers, 26" Long, Pair HB50 = C Channel Bar Hangers, 50" Long, Pair TRRC6P = White Rimless Trim Ring1 FK5 = 5 Amp Field Installable Fuse Kit 300V Max RMB22 = Wood Joist Bar Hanger, 22" Long, Pair TRMC6 = CFL Metal Trim Ring1 DTC6 = 6" CFL Deco Trim1 Notes: 1 Order trim with polymer trim ring. 2 Not available with Chicago Plenum. 3 Not available with 13W. (Consult specification sheet for ordering information and options). P H OTO M E T R I C S Candela Distribution Candlepower Distribution Curve Downlight 90˚ 75˚ 210 Test No. P13407 CD6S226E 6CS226W1LI Lumens = 2400 Efficiency = 58.1% Lamp = 18W DTT SC = 1.36 - 1.58 60˚ Cone of Light 420 45˚ 630 0° 15° 30° 0° 90° Distance Fixture to Lighted Plane Initial Footcandles at Nadir 5.5' 7.5' 8' 10' 12' 19 10 9 6 4 L/W 7' 9.5' 10.2' 12.8' 15.4' 8' 11' 11.6' 14.6' 17.6' 90˚ 75˚ 300 Test No. P13408 CD6S226E 6CS226W1LI Lumens = 3400 Efficiency = 58.3% Lamp = 26W DTT SC = 1.39 - 1.56 60˚ Cone of Light 600 45˚ 900 0° 15° 0° 90° 30° Candela 0 5 15 25 35 45 55 65 75 85 90 524 527 533 510 467 381 204 24 0 0 0 Candela Distribution Candlepower Distribution Curve Downlight Degrees Vertical Distance Fixture to Lighted Plane Initial Footcandles at Nadir 5.5' 7.5' 8' 10' 12' 27 14 13 8 6 L/W 7.1' 9.8' 10.4' 13' 15.6' 8' 10.8' 11.6' 14.6' 17.4' Degrees Vertical Candela 0 5 15 25 35 45 55 65 75 85 90 744 740 767 763 733 609 321 32 4 0 0 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-180 0-180 Lumens 492 822 1357 1396 0 1396 %Fixture 35.3 58.9 97.2 100.0 0.0 100.0 Luminance Average Candela/M2 Degrees Avg. 0° Luminance 45 55 65 75 85 26156 17265 2757 0 0 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-180 0-180 Lumens 694 1163 1929 1983 0 1983 %Fixture 35.0 58.6 97.3 100.0 0.0 100.0 Luminance Average Candela/M2 Degrees Avg. 0° Luminance 45 55 65 75 85 Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. 41808 27167 3676 750 0 ADP121221 2013-03-21 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: C500EL Type: R3 Notes: ISI13-9416 DESCRIPTION Catalog # New construction housing for Microgem round recessed trims. Includes low voltage transformer and junction box. For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing. Type Project Comments Date Prepared by SPECIFICATION FEATURES A ...Housing D ...Lamp Housing and plaster frame: 18 gauge CRS with flat black powder coated internal finish. Adjustable 1.5” to accommodate various ceiling thickness. 12V MR16 50 or 75 watts max. (not included) GU5.3 bi-pin lamp socket prewired with 18AWG SF1 leads. E ...Mounting B ...System Protection: Adjustable Hanger Bars. Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Ceiling Cut-Out: 3.75” C ...Electrical Low voltage electronic or magnetic transformer . 120V or 277V input, 11.5V output. Junction box is U.L. listed for through branch wiring for 5 #12 90ºC supply wire in/out or 60º supply wires for end of run. MICROGEM 10.50” [267mm] C500 Ceiling Cut-Out 3.75”dia. [95mm] New Construction Housing for Round Trim 5.13” [130mm] Compatible with the following lamps: 12V MR16 50W or 75W max. 5.50” [140mm] 3.50” [89mm] 3.75”dia. [95mm] 14.00” [356mm] min. to 25.00” [635mm] max. ORDERING INFORMATION C500 Fixture C500 = Microgem New Construction Housing www.cooperlighting.com Wattage / Power Supply / Voltage RSA = 50W max. / Magentic XFMR / 120V EL = 50W max. / Electronic XFMR / 120V 75 = 75W max. / Magnetic XFMR / 120V 75EL = 75W max. / Electronic XFMR / 120V 277 = 50W max. / Magentic XFMR / 277V EL277 = 50W max. / Electronic XFMR / 277V 75277 = 75W max. / Magnetic XFMR / 277V 75EL277 = 75W max. / Electronic XFMR / 277V Specifications and Dimensions subject to change without notice. 34"-JHIUJOHr0SJPO"WFr7BO/VZT $"rr'"9 rev 071112 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: C500EL Type: R3 Notes: ISI13-9416 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: MSS-14-120-KSH25-EB51 Type: S1 Notes: ISI13-9416 FAIL-SAFE D ES CR IPTIO N The Medical Task Undercabinet Series provides effective task lighting solutions for any application. This solid front specification grade fluorescent undercabinet incorporates the latest energy efficient technology with fluorescent lamps and electronic ballasts to improve the appearance and productivity of the illuminated environment. The unique, low-profile, solid-front design conforms to various applications such as nursing stations, modular offices, laboratories, computer work centers and practically any under-counter installation where an inconspicuous light source is required to provide high light levels below the luminaire. ® Type Catalog # Project Date Comments Prepared by S P EC IFIC A TIO N FEA TU R ES I nt er n a l Re f le c t o r F in ish L a m ps Standard white painted housing reflector for improved efficiency. Front Reflector Standard white painted solid front housing reflector improves efficiency and minimizes glare. High gloss, electrostatically applied, white powder coat finish, average minimum reflectance 92%. By others. Suitable for through wiring when installed in continuous rows. B a lla st Hous in g Available in 1.1" deep heavy 20 gauge seam welded CRS construction with no exposed fasteners. Keyhole mounting slots are located on top of housing for ease of installation. Knock-outs are provided on ends for continuous row mounting. El e c tri c a l Electronic Class P CBM/ETL. Minimal fixture depth causes limited ballast choices. Consult factory for compatibility. L a be l s UL/cUL listed for damp locations. Lens Choice of clear Pattern 12 prismatic acrylic or polycarbonate diffuser, KSH25 linear ribbed acrylic asymmetric. MSS T5 Fluorescent Undercabinet Solid Front Housing Length Dimension A Lamp 22.6" [574 mm] 34.4" [875 mm] 17.8" [ 452 mm] 29.6" [ 753 mm] 14WT5 21WT5 46.3" [1175 mm] 58.3" [1480 mm] 41.5" [ 1053 mm] 53.5" [ 1358 mm] 28WT5 35WT5 1-1/8" [28mm] 2-3/16" [56mm] 5" [127mm] M O U N TIN G 1-1/2" [38mm] 5/8 X 37/64 D.D K.O. (8) 13/16" [20mm] 1-1/2" [38mm] 3-3/16" [81mm] 3/16 Keyhole (2) 2-3/8" [61mm] Dimension A Housing Length 1-1/2" [38mm] 5/8" [15mm] 1-1/2" [38mm] 13/16" [20mm] 5/8" [15mm] Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADC051099 2012-10-22 11:04:14 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: MSS-14-120-KSH25-EB51 Type: S1 Notes: ISI13-9416 MSS ORDERING INFORMATION SAMPLE NUMBER: MSS-28-120-IK12-EB51 Series Lamp Type Voltage Lens Type Ballasts 1 Options (Factory Installed) MSS MSS =Undercabinet Solid Front T5 Fluorescents 120 =120V Pre-Heat 14 =(1) 14W T5, 2' 21 =(1) 21W T5, 3' 28 =(1) 28W T5, 4' 35 =(1) 35W T5, 5' IK12 =Pattern 12 Acrylic KSH25 =Linear Ribbed Acrylic, 0.115" thick IP12 =Pattern 12 Polycarbonate EB51 =(1) Electronic Ballast for use with T5 Lamp GLR =GLR Fuseholder with Fuse 6CP = 6ft. Cord with Grounded Plug GCO=Grounded Convenience Outlet (White) 2 RSW=Rocker Switch (White) 2 AM=Anti-Microbial Finish (all painted parts) Notes: 1 For specific electronic ballast, specify brand and catalog number. Ballast choices limited due to low-profile design. 2 GCO and RSW are mounted standard on the right side of the luminaire. Specifications and dimensions subject to change without notice. 'BJM4BGFt$VTUPNFS'JSTU$FOUFSt)JHIXBZ4PVUIt1FBDIUSFF$JUZ ("t5&-t'"9 ADC051099 2012-10-22 11:04:14 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: CR-228T5A-UNV-EBT1-U Type: S2 Notes: ISI13-9416 COOPER LIGHTING - METALUX ® DESCRIPTION The CR Series corridor wraparound features economy and energy efficient performance. CR luminaires utilizes a low brightness, extruded acrylic refractor with a heavy gauge end plate with embossed light seal for dependable performance and good looks. Catalog # The CRP Series is an ideal complimentary wraparound luminaire for diverse applications requiring economical general lighting. Comments Type Project Date Prepared by SPECIFICATION FEATURES Electrical* Ballasts are CBM/ETL Class “P” and are positively secured by mounting bolts. Pressure lock lampholders. UL/CUL listed. Suitable for damp locations. Construction Channel and wireway cover/reflector are die formed code gauge prime cold rolled steel. Numerous KOs for ease of installation. Heavy end plates with 7/8" KO and embossed light seal. Lampholder mounting brackets easily installed with snap-in action. Channel/wireway cover secured with quarter turn fasteners. Finish Multistage, iron phosphate pretreatment ensures maximum bonding and rust inhibitor. Lighting grade, baked white enamel finish. Frame/Shielding Refractor/lens is of clear 100% virgin acrylic full thickness with inside prisms along sides and outside pyramidal prisms on bottom. Lens can be hinged from either side in a lift and shift manner. Optional lens clip included. Note: Lens clips are recommended in all wall applications and whenever the fixture is subject to vibration. CR 114T5 214T5 128T5 228T5 5-5/16" [135mm] 4-1/4" [108mm] 4-5/8" [118mm] 2', 4' OR 8' SURFACE 1 OR 2 LAMP T5 Corridor Lite 6-1/8" [156mm] MOUNTING DATA 8' 3/16" [5mm] 15/64" [6mm] K.O. (4) 11/16" x 1" K.O. (2) 7/8" [23mm] K.O. (4) Ceiling Stand-Off Embossments 11/16"[18mm] K.O. (2) 1-3/4" x 3-1/4" K.O. (1) Ground Screw Bump 4-1/4" [108mm] ENERGY DATA 1-1/8" [29mm] 48" [1220mm] 81" [2058mm] Input Watts: 89-1/2" [2274mm] 91-7/8" [2334mm] 96" [2439mm] 4' 3/16" [5mm] 15/64" [6mm] K.O. (4) 11/16" x 1" K.O. (2) 7/8" [23mm] K.O. (4) Ceiling Stand-Off Embossments 2' 1-3/4" x 3-1/4" K.O. (1) Ground Screw Bump 4-1/4" [108mm] 4-1/4" [108mm] 16-1/2" [420mm] 41-1/2" [1055mm] 43-7/8" [1115mm] 48" [1220mm] 1-1/8" [29mm] LAMP CONFIGURATIONS 1 LAMP 3/16" [5mm] 15/64" K.O. (4) Ceiling Stand-Off Embossments Ground Screw Bump 11/16" x 1" K.O. (1) 7/8" K.O. (1) 2 LAMP X 4-5/8" [118mm] COOPER LIGHTING X=4-1/4 [108mm] 1-1/8" [29mm] LIFT & SHIFT REFRACTOR X 4-5/8" [118mm] X=4-1/4 6-1/8" [108mm] [156mm] 8-3/4" [222mm] 19-7/8" [505mm] 24" [610mm] Y 6-1/8" Y=2-5/8" [156mm] [67mm] Easily Removed. Hinges Either Side (Not Recommended For Sloped Ceiling Applications.) HB Ballast & STD Lamps 114T5 (23) 128T5 (37) 214T5 (34) 228T5 (60) Luminaire Efficacy Rating LER = FWCatalog Number: Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $ *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. ADF111021 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: CR-228T5A-UNV-EBT1-U Type: S2 Notes: ISI13-9416 CR PHOTOMETRICS CR-232A High Performance Ballast Two F32T8/35K Lamps 2850 lumens Spacing criterion: (II) 1.2 x mounting height, (⊥) 1.4 x mounting height Efficiency 87.9% Test Report: CR232A.IES LER = FW-79 Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $3.04 Angle 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Along II 1240 1221 1155 1044 869 589 301 165 86 2 4 9 12 12 11 11 13 14 10 Across ⊥ 1240 1275 1308 1223 1000 673 477 447 546 634 493 375 340 266 186 108 53 20 10 45° 1240 1251 1251 1180 1000 693 460 321 250 280 386 254 230 173 109 60 32 15 10 Coefficients of Utilization rc rw RCR 0 1 2 3 4 5 6 7 8 9 10 100 85 75 66 59 52 47 42 38 34 31 100 100 81 78 69 64 59 54 51 46 45 39 39 34 35 30 31 26 27 22 24 20 95 85 78 71 65 60 55 51 47 43 40 95 81 71 63 56 50 45 41 37 33 30 95 78 66 57 50 43 38 34 30 26 24 95 75 61 52 44 38 33 29 25 22 19 Lumens 1032 1707 2819 3807 1202 5009 %Lamp 18.1 29.9 49.5 66.8 21.1 87.9 20% 50% 50 30 10 30% 50 30 10 50 86 74 65 58 51 46 41 37 34 30 28 78 67 59 52 47 42 38 34 31 28 26 70 60 53 48 43 38 35 32 28 26 23 86 71 60 52 46 40 36 32 28 25 22 86 68 57 48 42 36 31 27 24 21 18 78 65 55 48 42 37 33 29 26 23 21 78 63 52 45 39 33 29 26 22 19 17 10% 30 10 70 59 50 44 39 34 31 27 24 21 19 70 57 48 42 36 31 27 24 21 18 16 0% 0 67 54 45 39 34 29 25 22 19 17 15 Typical VCP Percentages Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-180 0-180 Candela Angle 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Along II 684 680 647 588 500 354 178 99 49 0 1 4 7 5 4 4 0 0 0 Across ⊥ 684 712 779 785 612 381 258 236 298 434 396 319 235 107 44 34 0 0 0 45° 684 699 723 733 627 381 267 189 140 142 271 217 157 55 32 23 0 0 0 Coefficients of Utilization Effective floor cavity reflectance 80% 70% 70 50 30 10 70 50 30 10 100 90 82 75 69 63 58 54 50 46 43 CR-132A Energy Saving Ballast One F32T8/35K Lamp 3100 lumens Spacing criterion: (II) 1.3 x mounting height, (⊥) 1.5 x mounting height Efficiency 96.6% Test Report: CR-132A.IES LER = FW-103 Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $2.33 Candela %Fixture 20.6 34.1 56.3 76.0 24.0 100.0 Room Size (Ft.) 20 x 20 30 x 30 30 x 60 60 x 30 60 x 60 Height Along 8.5’ 10.0’ 62 67 55 59 48 51 54 58 46 49 Height Across 8.5’ 10.0’ 57 65 44 53 28 34 49 55 30 36 rc rw RCR 0 1 2 3 4 5 6 7 8 9 10 Effective floor cavity reflectance 80% 70% 70 50 30 10 70 50 30 10 109 98 89 81 75 69 63 59 55 51 48 109 93 81 71 63 56 51 46 42 38 35 109 109 88 84 74 68 63 57 55 48 48 42 42 36 38 32 34 29 31 26 28 23 104 93 84 77 70 65 60 56 52 48 45 104 88 77 68 60 54 49 44 40 37 34 104 84 71 61 53 46 41 37 33 30 27 104 80 66 55 47 40 35 31 28 25 22 20% 50% 50 30 10 30% 50 30 10 50 94 79 69 61 55 49 44 40 37 34 31 84 72 63 55 50 45 40 37 34 31 29 76 64 56 50 45 40 37 34 31 29 27 94 76 65 56 48 43 38 34 31 28 25 94 73 60 51 44 38 33 29 26 23 21 84 69 59 51 44 39 35 31 28 26 24 Zonal Lumen Summary Luminance Data Zone 0-30 0-40 0-60 0-90 90-180 0-180 Angle in Deg 45 55 65 75 85 Lumens 600 1017 1663 2226 768 2994 %Lamp 19.4 32.8 53.6 71.8 24.8 96.6 %Fixture 20.0 34.0 55.5 74.4 25.5 100.0 84 67 55 47 40 35 31 27 25 22 20 Average 0-Deg cd/sm 3265 2343 1596 1507 1330 10% 30 10 76 62 53 46 41 36 32 29 26 24 22 0% 0 76 60 51 43 37 33 29 26 23 21 19 Average 45-Deg cd/sm 3749 2867 2793 3238 7740 72 57 47 40 34 30 26 23 21 19 17 Average 90-Deg cd/sm 3607 2802 2993 5050 23281 ORDERING INFORMATION SAMPLE NUMBER: CR-228T5-UNV-EBT1-U Tandem Blank=2'or 4' Length (1) 8T=8' Length One Piece 8' Lens Series CR=Corridor Lite Number of Lamps (5), (6) (Not Included) 1=1 Lamp 2=2 Lamps Ballast Type (2) EBT =T5 Electronic (3) Program Rapid Start. Total Harmonic Distortion < 10%. Standard Ballast Factor=1.0 Wattage 14T5=14W T5 (24") 28T5=28W T5 (48") Ballast/FactorType Lens A=Acrylic Refractor/Lens Voltage (2) UNV=Universal Voltage 120-277 NOTES: (1) Length of fixture (2' or 4') determined by lamp wattage chosen. Products also available in non-US voltages and frequencies for international markets. (3) .90 and 1.15 ballast factor available for 2 or 3 14W T5 or 28W T5 lamps only. (4) Step Dimming ballast available for 2 or 3 14WT5 or 28W T5 lamps only. (5) 1-Lamp step dimming ballast in a Normal Ballast factor not available. 2-Lamp ballast will not operate 1-Lamp. (6) 1-Lamp ballast in a High Ballast factor not available. (2) EBT N=T5 Electronic (3) Program Rapid Start. Total Harmonic Distortion < 10%. Normal Ballast Factor=.90 EBT H=T5 Electronic (3), (6) Program Rapid Start. Total Harmonic Distortion < 10%. High Ballast Factor=1.15 EBT NDIM=T5 Electronic (4), (5) Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, Normal Ballast Factor=.95-1.0 EBT HDIM=T5 Electronic (4) Program Rapid Start. Total Harmonic Distortion < 10%. Step Dimming, High Ballast Factor=1.15 Packaging U=Unit Pack ACCESSORIES (Order Separately) SCF=Fixed Stem Set (Specify Length) SCS=Swivel Stem Set (Specify Length) SCA=Adjustable 48" Stem Set A1B/Spacer-U=Spacer 1-1/2" to 2-1/2" from ceiling (Use 2 per fixture) AYC/Chain/Set-U=Chain Hanger (Use 2 per fixture) GRP-SS-U=Gripper Hanger (1-1/2" Spacing) (Use 2 per fixture) Additional Accessories Available. See Options and Accessories Section. SHIPPING INFORMATION Catalog No. Number of Ballasts 1=1 Ballast 2=2 Ballasts Wt. CR-128T5A 8TCR-128T5A CR-228T5A 8TCR-228T5A 14 lbs. 24 lbs. 16 lbs. 26 lbs. Visit our web site at www.cooperlighting.com Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 6/11 ADF111021 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: MSS-28-120-KSH25-EB51 Type: S3 Notes: ISI13-9416 FAIL-SAFE D ES CR IPTIO N The Medical Task Undercabinet Series provides effective task lighting solutions for any application. This solid front specification grade fluorescent undercabinet incorporates the latest energy efficient technology with fluorescent lamps and electronic ballasts to improve the appearance and productivity of the illuminated environment. The unique, low-profile, solid-front design conforms to various applications such as nursing stations, modular offices, laboratories, computer work centers and practically any under-counter installation where an inconspicuous light source is required to provide high light levels below the luminaire. ® Type Catalog # Project Date Comments Prepared by S P EC IFIC A TIO N FEA TU R ES I nt er n a l Re f le c t o r F in ish L a m ps Standard white painted housing reflector for improved efficiency. Front Reflector Standard white painted solid front housing reflector improves efficiency and minimizes glare. High gloss, electrostatically applied, white powder coat finish, average minimum reflectance 92%. By others. Suitable for through wiring when installed in continuous rows. B a lla st Hous in g Available in 1.1" deep heavy 20 gauge seam welded CRS construction with no exposed fasteners. Keyhole mounting slots are located on top of housing for ease of installation. Knock-outs are provided on ends for continuous row mounting. El e c tri c a l Electronic Class P CBM/ETL. Minimal fixture depth causes limited ballast choices. Consult factory for compatibility. L a be l s UL/cUL listed for damp locations. Lens Choice of clear Pattern 12 prismatic acrylic or polycarbonate diffuser, KSH25 linear ribbed acrylic asymmetric. MSS T5 Fluorescent Undercabinet Solid Front Housing Length Dimension A Lamp 22.6" [574 mm] 34.4" [875 mm] 17.8" [ 452 mm] 29.6" [ 753 mm] 14WT5 21WT5 46.3" [1175 mm] 58.3" [1480 mm] 41.5" [ 1053 mm] 53.5" [ 1358 mm] 28WT5 35WT5 1-1/8" [28mm] 2-3/16" [56mm] 5" [127mm] M O U N TIN G 1-1/2" [38mm] 5/8 X 37/64 D.D K.O. (8) 13/16" [20mm] 1-1/2" [38mm] 3-3/16" [81mm] 3/16 Keyhole (2) 2-3/8" [61mm] Dimension A Housing Length 1-1/2" [38mm] 5/8" [15mm] 1-1/2" [38mm] 13/16" [20mm] 5/8" [15mm] Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADC051099 2012-10-22 11:04:14 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: MSS-28-120-KSH25-EB51 Type: S3 Notes: ISI13-9416 MSS ORDERING INFORMATION SAMPLE NUMBER: MSS-28-120-IK12-EB51 Series Lamp Type Voltage Lens Type Ballasts 1 Options (Factory Installed) MSS MSS =Undercabinet Solid Front T5 Fluorescents 120 =120V Pre-Heat 14 =(1) 14W T5, 2' 21 =(1) 21W T5, 3' 28 =(1) 28W T5, 4' 35 =(1) 35W T5, 5' IK12 =Pattern 12 Acrylic KSH25 =Linear Ribbed Acrylic, 0.115" thick IP12 =Pattern 12 Polycarbonate EB51 =(1) Electronic Ballast for use with T5 Lamp GLR =GLR Fuseholder with Fuse 6CP = 6ft. Cord with Grounded Plug GCO=Grounded Convenience Outlet (White) 2 RSW=Rocker Switch (White) 2 AM=Anti-Microbial Finish (all painted parts) Notes: 1 For specific electronic ballast, specify brand and catalog number. Ballast choices limited due to low-profile design. 2 GCO and RSW are mounted standard on the right side of the luminaire. Specifications and dimensions subject to change without notice. 'BJM4BGFt$VTUPNFS'JSTU$FOUFSt)JHIXBZ4PVUIt1FBDIUSFF$JUZ ("t5&-t'"9 ADC051099 2012-10-22 11:04:14 Catalog Number: BSX-PA-214T5-UNV-EB51-U Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Notes: Type: W2 ISI13-9416 COOPER LIGHTING - METALUX D ES CR IPTIO N Type Catalog # The Perf Arch design features a partially perforated shield that is suspended from the lighting element with slender rods and encloses the lamps. Perf Arch also features a heavy gauge endplate in an arched shape. ® Project Date Comments The Basix series is a celebration of the strip-light, and the Perf Arch optical assembly is intended to blend with this basic lighting element to transform it into an attractive, efficient assembly ideal for commercial or retail merchandising applications. Suitable for individual or continuous row mounting applications. Prepared by S PEC IFIC A TIO N FEA TU R ES Cons t r uc t i o n E l ec t r i ca l * F i n i sh The Perf Arch optical assembly features a perforated steel downlight lamp shield that incorporates an acrylic overlay lens. The endplate is constructed of heavy gauge painted steel. The mounting brackets for the optical assembly are made of slender tubular steel rods. The lighting element is die formed code gauge prime cold rolled steel. Conveniently located KOs for ease of installation. Lampholder mounting brackets easily installed with snap-in action. Channel/ wireway cover secured with quarter-turn fasteners. Ballasts are CBM/ETL Class “P” and are positively secured by mounting bolts. Pressure lock lampholders. UL/CUL listed. Suitable for damp locations. The optical assembly is painted after fabrication; a multistage cleaning cycle, iron phosphate coating with rust inhibitor precedes an electrostatically applied baked matte white polyester powder enamel finish. Mo u n ti n g Perf Arch can be surface, stem, or aircraft cable mounted. PERF ARCH 132 232 5-3/8" [137mm] Architectural Striplight 9-3/4" [248mm] L A M P C O N FIG U R A TIO N S MOUNT ING DAT A 7/8" [23mm] K.O. (3) Ceiling Stand-Off Embossments 3-1/4 5-3/8" [83mm] [137mm] 1-3/4" x 3-1/4" K.O. (1) Ground Screw Bump 2-11/16" [69mm] X=1-5/8" [42mm] 43-3/4" [1112mm] X 48" [1220mm] 9-3/4" [248mm] C O N TIN U O U S R O W MO U N TIN G ENERGY DATA X Y Input Watts: EB Ballast & STD Lamps 132 (30) 232 (61) Z ES Ballast & STD Lamps 132 (35) 232 (71) A Y X B X= 26" (2' model), 50" (4' model), 98" (8' model) Y= 25" (2' model), 49" (4' model), 97" (8' model) Z= 3-1/2" (89mm) row-end cable/surface mounting point 2-1/8" (54mm) row-end stem mounting point A= 2" B= 24" (2' model), 48" (4' model), 96" (8' model) X= 3-1/2" (89mm) Stand-alone cable/surface mounting point Y= 2-1/8" (54mm) Power input & stand-alone stem mounting joint Luminaire Efficacy Rating LER = FS-63 Catalog Number: BSX-PA-232 Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $3.82 *Reference the lamp/ballast data in the Technical Section for specific lamp/ballast requirements. LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAWS Safe and convenient means of disconnecting power. Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADF021792 2013-01-10 07:08:49 Catalog Number: BSX-PA-214T5-UNV-EB51-U Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: W2 Notes: ISI13-9416 BSX-PA P H O T O M E TR I C S Coefficients of Utilization rc rw Candela Effective floor cavity reflectance 80% 70% 70 50 30 10 20% 50% 30% 10% 70 50 30 10 50 30 10 50 30 10 50 30 10 0% 0 RCR 236 218 67 67 52 52 52 37 37 37 24 24 24 18 20 30 231 204 60 56 53 51 43 41 39 30 29 27 19 18 17 12 40 168 176 183 2 3 61 55 50 46 56 48 42 38 54 49 49 43 44 38 41 34 37 32 34 31 29 26 26 24 23 21 22 19 16 15 13 14 13 11 9 7 124 80 130 80 136 94 4 51 43 36 32 46 38 32 27 45 38 41 34 33 28 29 24 29 26 25 22 22 19 20 18 18 16 16 14 13 11 10 11 10 8 6 6 50 60 70 50 181 102 360 43 34 28 23 38 30 25 21 23 19 16 16 14 12 10 9 7 5 80 90 52 34 7 353 533 39 30 24 20 36 27 21 18 35 27 32 24 22 19 18 16 21 19 17 14 15 12 15 12 13 11 10 9 9 8 8 7 6 6 4 4 100 110 94 216 447 519 656 699 12 10 8 8 6 5 3 120 327 545 725 11 7 7 6 4 3 130 140 420 496 577 582 695 685 150 160 555 597 580 593 641 606 170 180 621 627 617 627 609 627 9 34 25 19 15 30 22 17 14 17 13 10 31 22 17 13 28 20 15 12 15 12 10 Zone 0-30 0-40 0-60 0-90 90-180 Efficiency 75.2% 235 212 67 67 0-180 11 9 Typical VCP Percentages Zonal Lumen Summary Test Report: BSXPA232.IES Across⊥ 252 245 76 76 76 76 8 Spacing criterion: (II) 1.2 x mounting height, (⊥) 1.3 x mounting height 45° 252 248 67 64 60 57 6 7 FO32/35K Lamps 2800 Lumens Along II 252 248 0 1 5 BSX-PA-232 Triad B232IUNVHP-B Electronic L.O.B.F. Ballast Angle 0 10 Lumens %Lamp 196 318 3.5 5.7 %Fixture 4.6 7.5 532 1007 3205 4212 9.5 18.0 57.2 75.2 12.6 23.9 76.1 100.0 Room Size (Ft.) 20 x 20 30 x 30 30 x 60 60 x 30 60 x 60 Height Along 8.5’ 10.0’ 98 99 95 97 88 87 77 93 93 85 Height Across 8.5’ 10.0’ 96 99 80 92 50 80 49 62 90 58 LER = FS-63 Yearly Cost of 1000 lumens, 3000 hrs at .08 KWH = $3.82 ORDERING INFORMATION SAMPLE NUMBER: BSX-PA-232-120V-EB81-U Series BSX= Basix Architectural Striplight Number of Lamps 1=1 Lamp 2=2 Lamps Mounting Arrangement Blank=Stand Alone (Standard) R=Continuous Row Mount Wattage 17=17W T8 (24") 32=32W T8 (48") 14T5=14W T5 (24") (1) 24T5=24W T5HO (24") (1) 28T5=28W T5 (48") (1) 54T5=54W T5HO (48") Basix Optics PA=Perf Arch (1) Voltage (2) 120V=120 Volt 277V=277 Volt 347V=347 Volt UNV=Universal Voltage 120-277V (3) Options GL=Single Element Fuse GM=Double Element Fuse EL=Emergency Installed(4) (2) NOTES: Not available in 347V. Products also available in non-US voltages and frequencies for (3) international markets. Not available when specifying emergencies, voltage must be specific. (4) Not available for 2' units. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.vailability and ordering information. Packaging Options Ballast Type (2) U=Unit Pack MF=Metallic Finish EB8 =T8 Electronic Instant Start. REP=Riveted Endplates. Total Harmonic Distortion < 10% For use in New York City. No. of Ballast RLS=Rotor-Lock Socket 1, 2 or 3 (T8 Lamps Only) EB8 /PLUS= T8 Electronic Instant Start. PI/CPI=Plug-In Option High Ballast Factor >1.13. (See options & accessories) No. of Total Harmonic Distortion < 20% Ballast 1, 2 or 3 ER8 =T8 Electronic Program Rapid Start. Total Harmonic Distortion < 10% No. of Ballast 1, 2 or 3 EB5 =T5 Biax Electronic Instant Start. Total Harmonic Distortion < 20% No. of Ballast 1, 2 or 3 Accessories (Order Separately) CCF-15- = 15" Fixed Cable CCA-96- = 96" Adjustable Cable Suspension Set Suspension Set (OrderTwo Per Fixture) (OrderTwo Per Fixture) PFC= Power Feed, PFC= Power Feed, Coil Power Cord Coil Power Cord PFS= Power Feed, PFS= Power Feed, 8' Straight 8' Straight Power Cord Power Cord NPF= Non Power Feed NPF= Non Power Feed CCF-18- = 18" Fixed Cable = Stem Set (OrderTwo SC Suspension Set Per Fixture) (OrderTwo Per Fixture) Length: 6", 8", 12", 24", 36", 48", 60", 72") PFC= Power Feed, Coil Power Cord F=Fixed PFS= Power Feed, S=45˚ Swivel 8' Straight A=Adjustable (48" Only) Power Cord NPF= Non Power Feed (Additional accessories available. See Accessories Section) SHIP P ING DAT A Catalog No. BSX-PA-132 BSX-PA-232 Specifications and dimensions subject to change without notice. Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801 Wt. 13 lbs. 13 lbs. ADF021792 2013-01-10 07:08:49 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: EUR60G Type: X1 Notes: ISI13-9416 COOPER LIGHTING - SURE-LITES ® DESCRIPTION The EU Series Edge-lit Exit provides an attractive yet easy to install universal edge-lit exit sign. The crystal clear lens panel provides excellent light distribution and exit visibility. Long-life, energy efficient LED lamps reduce energy costs and eliminate routine lamp maintenance. Type Catalog # Project Date Comments Prepared by S P E C I F I C AT I O N F E AT U R E S E l e c t ri c a l Tri m Pa n e l Code Compliance - Dual Voltage Input 120/277 VAC, 60Hz - Solid-state Voltage Limited Charger - Solid-state Switching - Brownout Circuit - Low-Voltage Disconnect - Overload/Short Circuit Protection - Test Switch/Power Indicator Light - Injection molded, high impact, clear acrylic panel - Single and double face panels standard - Red or Green letter colors - Universal, Field Installable Chevrons in Red or Green - Mirror background included with double face exits - Edge reflector for optimized efficiency and visibility - UL 924 Listed - ETL Listed - Life Safety NFPA 101 - NEC/OSHA - Most State and Local Codes B a tte r y Wa rra n t y - Sealed Nickel Cadmium (Self-Powered exits only) - Maintenance-Free, Long-Life - Full Recharge Time, 24 hrs. (max.) - Exit: 1-Year - Battery: 15 year pro-rata L a m p Da t a - AC LED: Long-life LED lamps provide uniform diffused illumination - DC: LED DC lamps H o u s i n g C o n s t ru c t i o n - Anodized Aluminum housing - Exit is universal face; single and double face exit lens provided standard - Black powder coat painted diecast canopy provided - All components including battery and electronics are located inside the exit housing - EUS Series Exit can be universally surface mounted, ceiling, wall, or end - EUR Series Exit is recess mounted in accessible ceiling only - Universal J-box mounting pattern EUR SERIES (RECESSED EDGELIT) EUS SERIES (SURFACE EDGELIT) EUR/EUS SERIES E D G E - L I T U N I V E R SA L E X I T S AC O N LY S E L F P OW E R E D ORDERING INFORMATION S I N G L E O R D O U B L E FAC E EMERGENCY Family EU=Series Edge-lit Exit Mounting R=Recessed Mount S=Surface Mount Series 60=LED Lamps AC only 70=LED Lamps, Self_Powered Face Options __=Universal Face (Single and Double face) Housing Trim Finish __=Anodized Aluminium Letters/Backgr ound Color R=Red LED LAMPS Chevron Direction __=_ Universal Stick-On Chevrons Voltage __=Dual Voltage, 120-277V G=Green Battery __=Nickel Cadmium (Self-Powered) Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. EXIT LIGHTING ENERGY D ATA Charge Mode (Fully Charged Battery): Sealed Lead Acid Battery AC Only LED Exits - Red LED LED Exits - Red LED Exits - Green Exits - Green Input Power: Input Power: 120V = 3.6W 120V = 3.9W 120V = 2.9W 120V = 3.1W 277V = 3.1W 277V = 3.5W 277V = 2.7W 277V = 2.8W Input Current (Max.): Input Current (Max.): 120V = .03A 120V = .03A 120V = .02A 120V = .02A 277V = .02A 277V = .02A 277V = .02A 277V = .02A ADX060385 pc 2010-08-06 10:10:50 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: EUR60G Type: X1 Notes: ISI13-9416 EUR EUS SERIES T E C H N I C A L DATA Lamps S o l i d - S t a te C h a rge r Te s t Sw i t ch / Powe r I n d i c a to r L i g h t The EU Series Edge-Lit Exits use energy efficient, long-life LED’s to provide uniform diffuse illumination of the exit face. The low operating costs and zero maintenance requirement makes LED lamps the wisest choice for exit signs today. Emergency illumination is provided by LED lamps in the self-powered models. Supplied with a 120/277 VAC, voltage regulated solid-state charger, the battery is recharged immediately upon restoration of AC current after a power failure. The charge circuit reacts to the condition of the battery in order to maintain peak battery capacity and maximize battery life. Solidstate construction recharges the battery following a power failure in accordance with UL 924. A test switch located on the side of the exit permits the activation of the emergency circuit for a complete operational systems check. The Power Indicator Light provides visual assurance that the AC power is on. H o u s i n g C o n s t ru c t i o n Rugged, durable anodized aluminum housing is impact resistant. Black powder coat painted mounting canopy provided. Housing is designed to allow easy swap out of exit lens when necessary. All EUS Series Exits can be wall, ceiling, or end mounted. Tri m Pa n e l Trim panels for the EU Series Edgelit Exits are injection molded from impact-resistant clear acrylic. The single face lens is available with a clear background. All double face lens come standard with a mirror background. Universal, fieldinstallable chevrons are provided in Red or Green allowing for universal configuration of the exit sign based on the directional needs of the application. The edge reflector further enhances visibility. B row n o u t C i rc u i t The brownout circuit on the exit monitors the flow of AC current to the exit and activates the emergency lighting system when a predetermined reduction of AC power occurs. This dip in voltage will cause most ballasted fixtures to extinguish causing loss of normal lighting even though a total power failure has not occurred. S e a l e d L e a d C a l c i u m B a tte r y Sure-Lites sealed nickel cadmium batteries are maintenance-free with a life expectancy of 15 years. The sealed rechargeable nickel cadmium battery offers high discharge rates and stable performance over a wide range of temperatures. The specially designed resealable vent automatically controls cell pressure, assuring safety and reliability. This battery is best suited for harsh ambient temperatures because the electrolyte is not active in the electrochemical process. Wa rra n t y S o l i d - S t a te Tra n s fe r The EU Series Edge-Lit Exit incorporates solidstate switching which eliminates corroded and pitted contacts or mechanical failures associated with relays. The switching circuit is designed to detect a loss of AC voltage and automatically energizes the lamps using DC power. Upon restoration of AC power, the DC power will be disconnected and the charger will automatically recharge the battery. All Sure-Lites’ products are backed by a firm one-year warranty against defects in material and workmanship. Maintenance-free, long-life, sealed Nickel Cadmium batteries carry a fifteen year pro-rata warranty. DIMENSIONS *17 1/2" *15" 4" 1.75" 13" 14 1/4" 3" 1.5" 4" 1.5" 1 1/2" 3 3/8" 3 3/8" 10 3/4" *13" 8" *10" 13" Surface EUS Series 13" Recessed EUR Series Specifications and dimensions subject to change without notice. Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 ADX060385 pc 2010-08-06 10:10:50 2010-08-17 13:08:25 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: EUR60G Type: X2 Notes: ISI13-9416 COOPER LIGHTING - SURE-LITES ® DESCRIPTION The EU Series Edge-lit Exit provides an attractive yet easy to install universal edge-lit exit sign. The crystal clear lens panel provides excellent light distribution and exit visibility. Long-life, energy efficient LED lamps reduce energy costs and eliminate routine lamp maintenance. Type Catalog # Project Date Comments Prepared by S P E C I F I C AT I O N F E AT U R E S E l e c t ri c a l Tri m Pa n e l Code Compliance - Dual Voltage Input 120/277 VAC, 60Hz - Solid-state Voltage Limited Charger - Solid-state Switching - Brownout Circuit - Low-Voltage Disconnect - Overload/Short Circuit Protection - Test Switch/Power Indicator Light - Injection molded, high impact, clear acrylic panel - Single and double face panels standard - Red or Green letter colors - Universal, Field Installable Chevrons in Red or Green - Mirror background included with double face exits - Edge reflector for optimized efficiency and visibility - UL 924 Listed - ETL Listed - Life Safety NFPA 101 - NEC/OSHA - Most State and Local Codes B a tte r y Wa rra n t y - Sealed Nickel Cadmium (Self-Powered exits only) - Maintenance-Free, Long-Life - Full Recharge Time, 24 hrs. (max.) - Exit: 1-Year - Battery: 15 year pro-rata L a m p Da t a - AC LED: Long-life LED lamps provide uniform diffused illumination - DC: LED DC lamps H o u s i n g C o n s t ru c t i o n - Anodized Aluminum housing - Exit is universal face; single and double face exit lens provided standard - Black powder coat painted diecast canopy provided - All components including battery and electronics are located inside the exit housing - EUS Series Exit can be universally surface mounted, ceiling, wall, or end - EUR Series Exit is recess mounted in accessible ceiling only - Universal J-box mounting pattern EUR SERIES (RECESSED EDGELIT) EUS SERIES (SURFACE EDGELIT) EUR/EUS SERIES E D G E - L I T U N I V E R SA L E X I T S AC O N LY S E L F P OW E R E D ORDERING INFORMATION S I N G L E O R D O U B L E FAC E EMERGENCY Family EU=Series Edge-lit Exit Mounting R=Recessed Mount S=Surface Mount Series 60=LED Lamps AC only 70=LED Lamps, Self_Powered Face Options __=Universal Face (Single and Double face) Housing Trim Finish __=Anodized Aluminium Letters/Backgr ound Color R=Red LED LAMPS Chevron Direction __=_ Universal Stick-On Chevrons Voltage __=Dual Voltage, 120-277V G=Green Battery __=Nickel Cadmium (Self-Powered) Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. EXIT LIGHTING ENERGY D ATA Charge Mode (Fully Charged Battery): Sealed Lead Acid Battery AC Only LED Exits - Red LED LED Exits - Red LED Exits - Green Exits - Green Input Power: Input Power: 120V = 3.6W 120V = 3.9W 120V = 2.9W 120V = 3.1W 277V = 3.1W 277V = 3.5W 277V = 2.7W 277V = 2.8W Input Current (Max.): Input Current (Max.): 120V = .03A 120V = .03A 120V = .02A 120V = .02A 277V = .02A 277V = .02A 277V = .02A 277V = .02A ADX060385 pc 2010-08-06 10:10:50 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: EUR60G Type: X2 Notes: ISI13-9416 EUR EUS SERIES T E C H N I C A L DATA Lamps S o l i d - S t a te C h a rge r Te s t Sw i t ch / Powe r I n d i c a to r L i g h t The EU Series Edge-Lit Exits use energy efficient, long-life LED’s to provide uniform diffuse illumination of the exit face. The low operating costs and zero maintenance requirement makes LED lamps the wisest choice for exit signs today. Emergency illumination is provided by LED lamps in the self-powered models. Supplied with a 120/277 VAC, voltage regulated solid-state charger, the battery is recharged immediately upon restoration of AC current after a power failure. The charge circuit reacts to the condition of the battery in order to maintain peak battery capacity and maximize battery life. Solidstate construction recharges the battery following a power failure in accordance with UL 924. A test switch located on the side of the exit permits the activation of the emergency circuit for a complete operational systems check. The Power Indicator Light provides visual assurance that the AC power is on. H o u s i n g C o n s t ru c t i o n Rugged, durable anodized aluminum housing is impact resistant. Black powder coat painted mounting canopy provided. Housing is designed to allow easy swap out of exit lens when necessary. All EUS Series Exits can be wall, ceiling, or end mounted. Tri m Pa n e l Trim panels for the EU Series Edgelit Exits are injection molded from impact-resistant clear acrylic. The single face lens is available with a clear background. All double face lens come standard with a mirror background. Universal, fieldinstallable chevrons are provided in Red or Green allowing for universal configuration of the exit sign based on the directional needs of the application. The edge reflector further enhances visibility. B row n o u t C i rc u i t The brownout circuit on the exit monitors the flow of AC current to the exit and activates the emergency lighting system when a predetermined reduction of AC power occurs. This dip in voltage will cause most ballasted fixtures to extinguish causing loss of normal lighting even though a total power failure has not occurred. S e a l e d L e a d C a l c i u m B a tte r y Sure-Lites sealed nickel cadmium batteries are maintenance-free with a life expectancy of 15 years. The sealed rechargeable nickel cadmium battery offers high discharge rates and stable performance over a wide range of temperatures. The specially designed resealable vent automatically controls cell pressure, assuring safety and reliability. This battery is best suited for harsh ambient temperatures because the electrolyte is not active in the electrochemical process. Wa rra n t y S o l i d - S t a te Tra n s fe r The EU Series Edge-Lit Exit incorporates solidstate switching which eliminates corroded and pitted contacts or mechanical failures associated with relays. The switching circuit is designed to detect a loss of AC voltage and automatically energizes the lamps using DC power. Upon restoration of AC power, the DC power will be disconnected and the charger will automatically recharge the battery. All Sure-Lites’ products are backed by a firm one-year warranty against defects in material and workmanship. Maintenance-free, long-life, sealed Nickel Cadmium batteries carry a fifteen year pro-rata warranty. DIMENSIONS *17 1/2" *15" 4" 1.75" 13" 14 1/4" 3" 1.5" 4" 1.5" 1 1/2" 3 3/8" 3 3/8" 10 3/4" *13" 8" *10" 13" Surface EUS Series 13" Recessed EUR Series Specifications and dimensions subject to change without notice. Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 ADX060385 pc 2010-08-06 10:10:50 2010-08-17 13:08:25 Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Catalog Number: ENT-C02-LED-E1-BL3-BK-TP Type: X3 Notes: ISI13-9416 INVUE ® DE SCRIPTION Entri LED features a classic and stylish design with the added benefits of solid state lighting technology, offering outstanding uniformity and energy savings. Using Cooper Lighting’s proprietary LED LightBAR™ technology and AccuLED optical systems, Entri LED offers designers vast versatility in system design, function and performance. Use Entri LED for wall mount architectural lighting applications and egress lighting requirements. UL/cUL listed for use in wet locations. Type Catalog # Project Date Comments Prepared by SP E CIFICATION FEATURES C o n s t r uc t ion O pt ic s Mounting HOUSING: Heavy wall, one piece die-cast aluminum construction for precise tolerance control and repeatability in manufacturing. Integral extruded aluminum heat sink provides superior thermal heat transfer in +40°C ambient environments. Housing and heat sink are designed to offer various options for down lighting, up lighting or a combination of both up and down. FACEPLATE / DOOR: One-piece die-cast aluminum construction. Captive, side hinged faceplate swings open via release of one (1) flush mount die-cast aluminum latch on housing side panel. Door closure and seal is ensured through a robust and positive retention bale latch which upon closing can be heard through distinct sound. GASKET: One-piece molded silicone gasket mates perfectly between the door and housing for repeatable seal. Silicone wire way plug on housing back wall seals incoming electrical leads to prevent moisture and dust entry. LENS: Uplight lens is impact- resistant, 5/32" thick tempered frosted glass sealed to housing with continuous bead silicone gasket. Downlight lens is LED board integrated acrylic overoptics, each individually sealed for IP66 rating. HARDWARE: Stainless steel mounting screws and latch hardware allow access to electrical components for installation and servicing. DISTRIBUTION: Primary downlight distribution offers a choice of six (6) patented, high efficiency AccuLED Optics™, that maximize light collection and directional distribution onto the application region. Each optical lens is precision manufactured via injection-molding, then precisely arranged and sealed on the board media. Optional uplight LED distribution features a diffuse soft glow for enhancing architectural scenes or accentuating structural features. LEDs: High output LEDs, 50,000+ hours life at >70% lumen maintenance, offered standard in 4000K (+/- 275K) CCT and nominal 70 CRI. JUNCTION BOX: Standard with zinc plated quick-mount junction box plate that mounts directly to 4" J-Box. LightBARs mount facing downward. Fixture slides over mounting plate and is secured with two (2) stainless steel fasteners. Mounting plate features a onepiece EPDM gasket on back side of plate to firmly seal fixture to wall surface, forbidding entry of moisture and particulates. Optional mounting arrangements utilize a die-cast mounting adaptor box to allow for LED battery pack, surface conduit and through branch wiring. Entri LED is approved for mounting on combustible surfaces. DIMESIONS ENT ENTRI LED TRIANGLE REVEALS F i n i sh Ele c t r i c a l DRIVER: LED drivers are potted and heat sunk for optimal performance and prolonged life. Standard drivers feature electronic universal voltage (120-277V/50-60Hz), greater than 0.9 power factor, less than 20% harmonic distortion and feature ambient temperature range of +40°C (104°F) down to minimum starting temperature of -30°C (-22°F). Shipped standard with Cooper Lighting proprietary circuit module designed to withstand 10kV of transient line surge. Options to control light levels, energy savings and egress capabilities (battery pack and separate circuit) are available. All LED LightBARs and drivers are mounted to a primary mounting plate and are easily replaced by use of quick disconnects for ease of wiring. Housing is finished in 5-stage Super TGIC polyester powder coat paint, 2.5 mil nominal thickness for superior protection against fade and wear. LightBAR cover plates are standard white and may be specified to match finish of luminaire housing. Standard colors include black, bronze, grey, white, dark platinum and graphite metallic. RAL and custom color matches available. Consult Outdoor Architectural Colors brochure for a complete selection. 1 - 2 LightBARs Solid State LED ARCHITECTURAL WALL LUMINAIRE Warranty Entri LED features a five-year limited warranty. CERTIFICATION DATA CONDUIT MOUNT / BATTERY BACK BOX UL/cUL Listed ISO 9001 IP66 LightBARs ARRA Compliant LM79 / LM80 Compliant ENERGY DATA 8-1/8" [206mm] 11" [279mm] SHIPPING DATA Approximate Net Weight: 16 lbs. (7.3 kgs.) C ER TEM S YS D 7-3/4" [196mm] S 15-3/4" [400mm] Electronic LED Driver >0.9 Power Factor <20% Total Harmonic Distortion 120-277V/50 & 60hz, 347V/60hz, 480V/60hz -30°C Minimum Temperature 40°C Ambient Temperature Rating TIFIE AVU092077 2013-02-27 17:23:26 Catalog Number: ENT-C02-LED-E1-BL3-BK-TP Submitted by Illumination Systems, Inc Job Name: Campbell County Memorial Hospital Clinic Engineer: Beaudin Ganze Denver (Lakewood) Type: X3 Notes: ISI13-9416 ENT EN TRI L ED TRIAN G L E REVEAL S P O W E R A N D L U M EN S B Y BA R C O U N T LUME N MULT IP LIE R DISTRIBUTION Number of LightBARs Power [Watts] Current @ 120V [A] Current @ 277V [A] BL2 BL3 BL4 GZW SLR/ SLL 7 LED LIGHTBAR C01 27 0.23 0.13 1,770 1,625 1,720 1,725 1,571 C02 54 0.46 0.21 3,540 3,249 3,440 3,450 3,142 Ambient Temperature Lumen Multiplier 10°C 15°C 25°C 40°C 1.04 1.03 1.00 0.96 21 LED LIGHTBAR B01 27 0.23 0.13 2,177 1,998 2,115 2,122 1,932 B02 51 0.43 0.20 4,354 3,996 4,231 4,244 3,865 ORDERING INFORMATION Sample Number: ENT-B02-LED-E1-BL3-GM Product Family 1 ENT=Entri Triangle Reveals Lamp Type LED=Solid State Light Emitting Diodes Number of 2, 3 Lightbars B01=[1] 21 LED LightBAR Voltage E1=Electronic (120-277V) B02=[2] 21 LED LightBARs C01=[1] 7 LED LightBARs 347=347V 480=480V C02=[2] 7 LED LightBARs Notes: 1 Distribution BL2=Type II w/Back Light Control BL3=Type III w/Back Light Control BL4=Type IV w/Back Light Control GZW=Wall Grazer Wide SLL=90 Degree Spill Light Eliminator Left Finish 4 BK=Black Options 5 ULG=Uplight Glow Accessories 11 VA2001-XX=Thru-Way Conduit AP=Grey BZ=Bronze PC=Button Type Photocell (Available in 120V, 208V, 240V, and 277V) VA6172=Wire Guard WG=Wire Guard 2L=Two Circuits6 MA1253=10kV Circuit Module Replacement WH=White DP=Dark Platinum GM=Graphite Metallic SLR=90 Degree Spill Light Eliminator Right DesignLights™Consortium Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details. 2 Standard 4000 K CCT and greater than 70 CRI. LightBARS for downlight use only. 3 21 LED LightBAR powered at 350mA, 7 LED LightBAR powered at 1A. 4 Custom and RAL color matching available upon request. Consult your customer service representative for further information. 5 Add as suffix in the order shown. 6 Low-level output varies by bar count, consult factory. Not available with 347V or 480V. Available with 2 Bars (B02 or C02) only. 7 Consult customer service for lead times and lumen multiplier. 8 Available with B02 or C02, only (1) LightBAR on street side will be wired to sensor. Time Delay factory setting 15 minutes. When ordered with Option PC, both light bars will connected to photocell as primary switching means. Standard sensor lens covers 8-foot mount height, 360-degree coverage, maximum 48-foot diameter. Not available in all configurations or with BBB or CWB options. 9 Specify 120 or 277V. LED standard integral battery pack is rated for minimum operating temperature 32°F (0°C). Operates (1) lightbar for 90 minutes. Not available in all configurations or with OSB option. Consult factory. 10 Specify 120 or 277V. LED cold weather integral battery pack is rated for minimum operating temperature -4°F (-20°C). Operates (1) lightbar for 90 minutes. Not available in all configurations or with OSB option. 11 Order separately, replace XX with color suffix. Adaptor Box VA6173=Tamper Resistant Driver Bits TP=Tamper Resistant Hardware LCF=LightBAR Cover Plate Matches Housing Finish 7060=70 CRI/6000K CCT7 8030=80 CRI/3000K CC7 OSB=Occupancy Sensor with8 Back Box BBB=Battery Pack with Back 9 Box (Specify 120 or 277) CWB=Cold Weather Battery 10 Pack with Back Box (Specify 120 or 277) NOTE: Specifications and dimensions subject to change without notice. Visit our web site at www.cooperlighting.com AVU092077 2013-02-27 17:23:26 Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 2013-02-27 17:02:20 Design Development Submittal Telecommunications Equipment Cut Sheets Communications solutions: fast, simple & comprehensive Responder 5 is a complete and easy-to-use communication system that integrates the capabilities of the latest technology — wireless phones and pagers, real-time locating systems, electronic staff assignments, and enterprise-wide reporting — with traditional “nurse call” equipment. A system that’s readily customized to fit your environment, with solutions to the challenges faced within your Hospital — Responder 5 delivers the performance you’re looking for. Challenge: Slow connections, multiple brands of phones, noise Solution: True VoIP Integration Responder 5 connects nurse call hardware to VoIP wireless phones, using the SIP protocol. The benefits include immediate patient-to-staff communications, complete nurse mobility, and a quieter healing environment for patients. The solution provides the shortest connect times, while allowing integration with the phone of your choice. As patient calls get answered — by the right person, at the right time — both quality of care and patient satisfaction improves significantly. Challenge: Piles of paper— hard to find meaningful data Solution: Eliminating the paper trail Responder 5 enables management to assign staff to patients/rooms, automate the “on and off” duty process, store patient data along with their nurse call activity, and generate meaningful reports — all without the paper trail. Challenge: Communication from the patient bathroom Solution: Audio in the bath station Responder 5 includes bathroom stations with audio capability so that the patient can communicate with mobile staff from inside the bathroom. Challenge: We can’t accept another SILO system Solution: A proven, reliable systems integrator Rauland-Borg has installed and integrated to more systems than all our competitors nationwide. Our solutions have been integrated with all major ADT vendors, thereby ensuring the delivery of meaningful patient information. Also, Responder 5 can integrate with all major staff, patient, and asset tracking systems, thereby maximizing existing investments and enhancing your nurse call system. Challenge: Systems go out of date so quickly Solution: A simple, sophisticated solution that complements your existing and future needs Responder 5 can meet your needs, today and tomorrow. The system is designed to fit existing systems, yet adapt as needs change or demand grows; its features and functions expand to address future needs and requirements. Because the system is scalable, it’s the right solution for a unit, a single facility, or an entire hospital network. 59 60 58 57 56 5 55 52 50 40 47 41 40 39 38 37 28 30 20 45 36 20 21 22 24 19 18 10 0 1 TRUE VOIP INTEGRATION. 2 ELIMINATING THE PAPER TRAIL. 3 AUDIO IN THE BATH STATION. 4 A PROVEN, RELIABLE SYSTEMS 5 A SIMPLE, SOPHISTICATED INTEGRATOR. SOLUTION. Let Responder 5 work for you Components Patient Room Components Patient Stations • Multiple call-in priorities available • Tilt/Release DIN receptacle allows for easy, clean disconnect of handset from the patient station • Auxiliary device receptacle with separate call-in priority setting Special Function Stations • One-touch operation • Large, backlit call buttons • Custom buttons for unique call priorities • Customized by facility, floor, and area • Water-resistant (bath station) • LED to indicate specialty bed is connected • IV alarms and bed exit Audio Pull-Cord Station • Audio to the bathroom • Easy to use pull-cord • Call-in button for routine calls Nurse Station Solutions VoIP Nurse Console VoIP Staff Terminal • Large, color display • Easy-to-use touch • Color touch screen points, customized to each console • No unused/redundant features/functions • Responder 5 manages hundreds of call processes Wireless Devices Telephone • Route patient calls directly to a specific caregiver • Remote answer of patient calls • Dial out to any intercom station or console • Use telephone throughout facility • Ensures patient confidentiality Pocket Pagers • Console operator screens calls and selectively dispatches staff • Text messaging of patient and maintenance calls for displaying and answering calls • Place calls from a room through simple touch points • Easily customized by terminal/device to fit needs Real-Time Locating System • Open Architecture Integration with tracking vendors • Tracking of staff, assets or patients supported All Wireless Devices • Multi-vendor support • Facilities and departments pick the “best of breed” for their needs Software Application Suite My Profile Responder 5 offers a simple mechanism for employees to sign on and off duty simply by swiping a bar coded ID. By telling the system a staff member is on duty, they are now ready to receive calls, text messages or other communications. Once on duty the caregiver will only receive calls or alerts that were intended for them. This solution allows automatic and direct communication between patients and caregivers as well as from staff to staff. Staff Assignment Responder 5 simplifies your workflow. Staff assignments can be scheduled up to one week in advance, allowing for continuity of care for your longer term patients from day to day and caregiver to caregiver. The system’s layout gives management a visual indicator of the workload for each staff member as patients are assigned to staff; so the nurse manager can continuously assess and level load for each caregiver. PC Console Responder 5 shows activity in a user-friendly application without sacrificing the reliability of a closed network. Information from many sources is integrated into staff directories, calls lists, and services giving staff the whole picture. Integration with patient information systems, staff/patient tracking systems, wireless devices, and nurse call hardware makes the staff’s job easier and more efficient by seamlessly incorporating meaningful information from disparate systems. An intuitive screen design makes Responder 5 easy-to-use and easy-to-learn, facilitating higher user compliance. Reports Manager The Reports Manager module generates reports — exception reports, detail reports, and statistical summary information — wrapped in a user-friendly interface. Responder 5’s fully historical MS SQL database makes data easily available at any time and yet secure enough for your most stringent IT security policy. Simple implementation with low demand on IT staff Responder 5 is a VoIP network running the SIP standard protocol which makes interfacing to wireless phones and other technologies easy. In fact, the integration capabilities of Responder Systems are far more sophisticated and robust than those in other nurse call systems. Our solution delivers faster connection times and greater traffic handling capacity. The solution’s information applications make use of standard IT architecture; they operate (and are managed) independent of the nurse call infrastructure. The integration of Responder 5 with the hospital’s information system and with other systems (such as wireless phones, and “Real Time Locating Systems”) is accomplished via a single point of connection using standard protocols. These features result in greater overall reliability and simpler, more cost-effective maintenance and support. Responder 5 utilizes standard CAT 5E/6 cabling. Because it has an Ethernet backbone, the system can also run long distances on fiber. With low demand on IT staff, why work with anyone else? Network Wireless Phones Wireless Access Point SQL Cluster Hospital LAN 1 2 3 1) Responder Gateway Server 2) Responder Applications Server 3) Responder Integration Server Rauland-Borg Corporation USA Fax 800-752-7725 800-217-0977 Canada 905-607-2335 Fax 905-607-3554 www.rauland.com ©2011 Rauland-Borg Corporation. PHCPM0066. BDI 110316 Responder® Health Care Communications Systems MODEL: 354015 - STAFF ASSIST/CODE STATION FEATURES • • • • • • • • Two (2) call points with Call-Assurance LEDs Back-lit pushbuttons for easy activation Cancel button Continuous supervision of station Plug-in connectors for easy service Elapsed timer outputs 1-gang adapter plate included Optional antimicrobial Bio-seal to cover buttons and allow for easy disinfecting of the station 354015 Adapter Plate SPECIFICATIONS Power Required: 7.1mA @ 18VDC Weight: 0.2 lbs (0.8 kg) Size: W: 3.2” (8.0 cm) H: 4.25” (10.8 cm) D: 0.6” (1.5 cm) in back box: 0.5” (1.3 cm) off-wall with adapter plate W: 3.9” (9.9”) H: 5.0” (12.7 cm) D: 0.6” (1.5 cm) in back box: 0.7” (1.8 cm) off-wall Housing and Finish: High-impact molded Cycoloy 2950 UL 94-5VB; light grey faceplate Controls/Indicators: (2) push buttons for call actuation, Two (2) Call-assurances LEDs, One (1) Cancel button Terminations: Plug-on connectors Backbox Requirement: 1 gang (Non-gangable), 3 1/2” Deep DESCRIPTION The Staff Assist / Code Station is an emergency dual pushbutton station that has the ability to place two (2) unique call priorities from a single station. Using special buttons, the station can be customized for unique call-ins such as: “Code Pink”, “Push for Help”, etc. The buttons can also be used for staff registration such as: “Nurse in Room”, etc. The Cancel button allows for cancellation of the call at the station. This type of station is normally located at a patient room head wall for placing a call for help, staff emergency and/or code call. The station provides outputs for elapsed timer(s) (the associated timer must support either a momentary or latched contact closure input). The Staff Assist / Code Station is connected to its associated corridor light or domeless room controller and is continually supervised. A non-cancelable call will annunciate at the associated console(s) when the station is removed from the system or a short occurs. The call will detail the location of the station (see Configuration and Installation Manual for more details). Architect and Engineer (A&E) Specifications available online at: customerconnection.rauland.com Specifications subject to change without notice ©Copyright 2009 Rauland-Borg Corporation Printed in USA USA-Mt.Prospect, IL Canada www.rauland.com Rev 09/2009 • 800-752-7725 • 905-607-2335 • Fax 800-217-0977 • Fax 905-607-3554 Rauland-Borg Corporation Responder® Health Care Communications Systems MODEL: 351200 - NURSE CONSOLE FEATURES • • • • • • • • • • VoIP device Full-Duplex audio Color Display Screen Over 990 possible unique facility-defined call priorities Thirty-two (32) programmable functions 5-line display with associated function/scroll/select buttons Day/Night tones Console speaker level adjustment Optional tone mute of calls in progress Displays up to three (3) incoming calls with the ability to scroll to see additional pending calls • Twelve (12) unique call-in tones • Choice of instant 2-way communication with handset or push-to-talk operation via speaker-microphone • Room swing capabilities • Continuously supervised with self-diagnosing error messages and distinctive console failure audio alert 351200 SPECIFICATIONS Display: 5-line display on a color, ¼ VGA screen Power Requirements: PoE (802.3af compliant) 26-56VDC 9 watts Connection: 10/100 Mb Ethernet Weight: 2.65 lbs (6.7 kilograms) without carton or Ethernet cable Size: W: 10.4” (26.4 cm) H: 9.2” (23.3 cm) D: 1.9” (4.8 cm) Housing and Finish: High-impact molded Cycoloy 2950 UL 94-5VB; light gray faceplate Controls/Indicators: Four (4) soft touch keys programmable for up to thirty-two functions; Three (3) line selector keys; One (1) scroll key for call selection; One (1) scroll key for function selection; One (1) standard ten (10) key dial pad; One (1) Push-to-Talk button; One (1) cancel button; One (1) volume control button Terminations: Plug on connector. DESCRIPTION The VoIP Nurse Console is typically located at a local nursing station, work station, centralized communications center, or any place where staff receive calls, communicate with staff, or initiate any Responder 5 related features. The console may be desk or wall mounted. The VoIP Nurse Console provides complete information concerning incoming calls including: patient or staff member’s room location, bed (if applicable), call priority, and length of time call has been waiting. An operator may selectively answer any of three (3) calls displayed or scroll through a list using the key pad for call selection. A call may be answered using the handset for semi-private conversation or the Push-to-Talk key for a hands-free conversation. The VoIP Nurse Console can be configured for up to twenty-four (24) functions including Setting/Review Service Requirements, Emergency Call Upgrade, Day/Night tones, Staff Follow, Sequential Room Monitor, Swinging Groups of Rooms, etc. These functions are activated using the scroll key pad and selector buttons. Functions are customized on an individual basis allowing each VoIP Nurse Console to be programmed for its specific location and purpose. The VoIP Nurse Console is continually supervised for both power and signal. Architect and Engineer (A&E) Specifications available online at: customerconnection.rauland.com Specifications subject to change without notice ©Copyright 2008 Rauland-Borg Corporation Printed in USA USA-Mt.Prospect, IL Canada www.rauland.com Rev 08/2008 • 800-752-7725 • 905-607-2335 • Fax 800-217-0977 • Fax 905-607-3554 Rauland-Borg nd-Borg Corporation Corporatio AudiaFLEX Digital Audio Platform AudiaFLEX is an expanded version of Audia,® the benchmark in digital audio systems for demanding professional sound installations. AudiaFLEX provides the same easy-to-use software and functional algorithms, but with far greater flexibility in the choice of I/O configurations. Inputs and outputs may be specified by pairs, in any combination, up to a total of 24. All possible I/O configurations are available with or without CobraNet,® for multi-device or stand-alone systems. The intuitive software provides audio system design capabilities via PC computer, and allows easy selection, viewing, and calibration of numerous audio components: mixers, combiners, matrixes, equalizers, filters, crossovers, dynamics, routers, delays, remote controls, meters, generators, diagnostics, etc. Once a system design is compiled, it is downloaded into AudiaFLEX, where it can then be controlled via third-party systems such as AMX® and Crestron,® via daVinci™ software, and/or via dedicated Audia remote control panels. FEATURES • up to 24 inputs/outputs, with or without CobraNet • input (IP-2), echo canceling (AEC-2HD), telephone (TI-2), output (OP-2e), & amplifier (PA-2) cards • input and output expanders (8-channel/CobraNet) • on-screen display of the total audio design • configuration/control via PC/laptop (Ethernet) • third-party control via RS-232 or TCP/IP • remote control panels for levels, presets, etc. • built-in diagnostic tools • multi-level security coding • unlimited system size • RoHS compliance and AES grounding practices • CE marked and UL/C-UL listed • covered by Biamp Systems’ five-year warranty • Ability to select, view, and calibrate: ° Mixers: standard, automatic, matrix, combiners ° Equalizers: graphic, parametric, feedback ° Filters: HPF, LPF, high shelf, low shelf, all-pass ° Crossovers: 2-Way, 3-Way, 4-Way ° Dynamics: leveler, comp/limiter, ducker, ANC ° Routers: 2x4 ~ 56x56 ° Delays: 0 ~ 2000 ms ° Controls: levels, mutes, presets, schedulers, logic gates, RS-232 commands, etc. ° Meters: signal present, peak, RMS ° Generators: tone, pink-noise, white-noise ° Diagnostics: transfer function ARCHITECTS & ENGINEERS SPECIFICATION The Digital Audio Platform shall be available in various I/O configurations. Inputs/outputs shall be specified in pairs, up to a total of 24. Mic/line Input (IP-2), Acoustic Echo Cancellation (AEC-2HD), Telephone Interface (TI-2), Mic/Line Ouput (OP-2e), and Amplifier Output (PA-2) input/output options shall be available. Inputs/outputs shall be analog, with internal 24-bit A/D & D/A converters operating at a sample rate of 48kHz. All internal processing shall be digital (DSP). Electronically balanced inputs and outputs shall be provided on plug-in barrier-strip connectors. Inputs and outputs shall be individually programmable for either microphone or line level signal. Expansion units, utilizing CobraNet,® shall be available in 8-channel versions, for adding analog or digital inputs/outputs to a system. Each hardware configuration shall include six 60MHz 32-bit floating point DSPs. Software shall be provided for creating/connecting DSP system components within each hardware unit. Available system components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/gain controls, routers, delays, remote controls, meters, generators, and diagnostics. Ethernet communications shall be utilized for software control, configuration, and DSP distribution. Each hardware configuration shall be available with CobraNet (for multi-unit applications) or without CobraNet (for stand-alone applications). CobraNet technology shall transport digital audio over fast Ethernet, allowing multiple units to share digital audio. Multi-unit applications shall require an external 10/100Base-T Ethernet switch. All CobraNet and Ethernet connections shall be via CAT5 cable or fiber-optic. After initial programming, systems may be controlled using either TCP/IP or RS-232 serial communication by third party control systems (such as AMX® and Crestron®), by PC computer, and/or by dedicated remote control devices. Software shall operate on a PC computer, with network card installed, running Windows® XP Professional/Vista. The Digital Audio Platform shall be CE marked, UL/C-UL listed, and shall incorporate AES48-2005 Grounding & EMC practices. The Digital Audio Platform shall be compliant with EU Directive 2002/95/EC, the RoHS directive. Warranty shall be 5 years. The Digital Audio Platform shall be AudiaFLEX. Biamp Systems | 9300 S.W. Gemini Drive | Beaverton, OR | 97008 | USA | +1.503.641.7287 | www.biamp.com 1SPGFTTJPOBM1PXFS"NQMJmFST TRA Series TRA Series specifications 53"]53"]53"]53" Features: t$POWFDUJPODPPMJOH t&YUSFNFMZMPXOPJTF t*OUFSOBMMZ.PVOUFE$POTUBOU7PMUBHF 5SBOTGPSNFST t&YUFOTJWFQSPUFDUJPODJSDVJUSZ t4BGFUZ$PNQMJBODFD567VT $& '$$ 3P)4 Ashly’s TRA-Series expands on the SRA’s concept of “the right amp for the job.” These 2RU amplifiers utilize our state of the art technology to create advanced, efficient amplifiers perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. Four models available in twoand four-channel configurations, with power ratings of 75W and 150W per channel @ 4 ohms, 70V and 100V. All audio controls of the TRA-Series amplifiers are on the rear panel or internal. A six-step LED meter for each channel lets you monitor all levels. All TRA amplifiers can drive four or eight ohm loads and 25V or 70V and 100V constant voltage lines simultaneously. Output transformers are internally mounted. The 150W models are capable of driving 25V constant voltage lines using the direct coupled 4 ohm output. TRA-Series amplifiers incorporate a switch-mode-power supply and Class-D amplifier circuitry, providing an extremely power-efficient solution. All TRASeries amplifiers are convection-cooled, so there’s little maintenence after the installation, and no annoying fan noise. Of course you get the reliability, superior sonic quality and rugged construction you’ve come to expect from Ashly. Features include: convection cooling, extremely low noise, extensive protection circuitry, euroblock inputs and Euroblock outputs. Front panel features include: mains power switch and an LED signal level meter indicating –24dB, -18dB, -12dB, -6dB, -3dB and clip alert for each channel. Rear panel features include: level attenuators for each channel, rear panel switches to select between two choices of input sensitivity, remote power turn-on/off and adjustable turn-on delay up to eight seconds. 'SPOUQBOFM t4UFQ4JHOBM-FWFMBOE$MJQ-&%T 3FBSQBOFM t-FWFMBUUFOVBUPSTGPSFBDIDIBOOFM t&VSPCMPDLJOQVUT t&VSPCMPDLPVUQVUT t4FMFDUBCMFJOQVUTFOTJUJWJUZ t3FNPUFQPXFSUVSOPOPGG t"EKVTUBCMFUVSOPOEFMBZVQUPFJHIU TFDPOET 8BUUTQFSDIBOOFM Model TRA-2075 TRA-2150 TRA-4075 TRA-4150 8 ohms 40 80 40 80 4 ohms 75 150 75 150 25V/70V/100V 75/75/75 150/150/150 75/75/75 150/150/150 ® Networked Paging Station-1 Networked Paging Station-1 is a microphone console using a single cable to carry audio, control, and power, with an innovative user-interface, designed exclusively for use with AudiaFLEX systems. It provides a powerful and easy-to-use set of tools with a wide range of features and functions for the paging market. Networked Paging Station-1 is ideal for stadiums, convention centers, shopping malls, and other facilities where affordable and reliable delivery of clear audio is paramount. Networked Paging Station-1 integrates with AudiaFLEX networks via CobraNet®. Utilizing the Networked Paging Station-1 LCD display, scroll-wheel, and three buttons, users can quickly switch between preprogrammed groups and zones to address even the most complex page routing network. FEATURES designed for exclusive use with AudiaFLEX systems 16 simultaneous pages allowed per AudiaFLEX unit Power Over Ethernet (PoE) or external supply 32 programmable microphone button operations CobraNet audio/control plus power on single cable 16 priorities, with override and lock-out functions rotary encoder with LCD for programming/setup selectable announcement chime tone options multiple station / multiple AudiaFLEX systems CE marked and RoHS compliance ARCHITECTS & ENGINEERS SPECIFICATION The networked paging station shall be designed exclusively for use with AudiaFLEX systems. The networked paging station shall ® provide paging audio and control data via CobraNet , and receive Power-Over-Ethernet (PoE), utilizing a single (CAT5) network cable to a rear panel RJ45 connector. Use of an external power supply shall be optional. A rotary encoder and LCD screen shall be provided on the front panel for programming and setup. Multiple networked paging stations may be connected to each AudiaFLEX unit, by means of Ethernet switches, in either single-unit or multi-unit systems. Up to 16 simultaneous pages shall be allowed per AudiaFLEX unit. Up to 16 paging priority levels shall be available, including override and lock-out capabilities. Each networked paging station shall have up to 32 programmable button operations assignable, and multiple announcement chime tone options shall be available. Networked paging stations shall be represented as functional blocks within Audia ® software, which shall also include dedicated page zone routing blocks, for easy inclusion into system designs. The networked paging station shall be CE marked and shall be compliant with EU Directive 2002/95/EC, the RoHS directive. The networked paging station shall be a Networked Paging Station-1. Biamp Systems | 9300 S.W. Gemini Drive | Beaverton, OR | 97008 | USA | +1.503.641.7287 | www.biamp.com Model MX400D Series Microphones Specification Sheet MODEL MX400D SERIES MICROPHONES OVERVIEW Shure Microflex® MX400D Series microphones are miniature electret condenser gooseneck microphones with a desktop base and attached 3 m (approximate)/10 ft cable. The desktop base allows these microphones to be used in multi-purpose rooms where quick set-up is required, or where permanent installation is impractical. FEATURES S Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum S Interchangeable cartridges provide the right polar pattern for any application S Balanced, transformerless output for increased immunity to noise over long cable runs S Programmable on/off switch and LED on/off indicator S New brighter LED improves visibility under strong ambient lighting S Logic input and output terminals for remote control or use with automatic microphone mixers S Snap-fit foam windscreen MODEL VARIATIONS S MX412D: 304.8 mm (12 in.) desktop mini-condenser, gooseneck-mounted microphone. S MX418D: 457.2 mm (18 in.) desktop mini-condenser, gooseneckmounted microphone. SPECIFICATIONS Frequency Response (Figure 1) 50 to 17,000 Hz Polar Pattern (Figure 2) Output Impedance (at 1,000 Hz) Rated at 150 Ω (180 Ω actual) Open Circuit Sensitivity At 1 kHz, ref. 1 V per Pascal* Cardioid: –33.5 dBV (21.1 mV) Supercardioid: –32.5 dBV (23.7 mV) Omnidirectional: –28.0 dBV (39.8 mV) * 1 Pascal=94 dB SPL Maximum SPL (1kHz at 1% THD, 1 kΩ load) Cardioid: 123.0 dB Supercardioid: 122.0 dB Omnidirectional: 117.5 dB Equivalent Output Noise (A-weighted) Cardioid: 29.0 dB SPL Supercardioid: 28.0 dB SPL Omnidirectional: 70.5 dB SPL Signal to Noise Ratio (referenced at 94 dB SPL) Cardioid: 65.0 dB Supercardioid: 66.0 dB Omnidirectional: 70.5 dB Dynamic Range with 1 kΩ load 94.0 dB Common Mode Rejection 45.0 dB minimum Mute Switch Attenuation 50.0 dB minimum Preamplifier Output Clipping Level (1% THD) –6.0 dBV (0.5 V) Polarity Positive sound pressure on diaphram produces positive voltage on pin 2 relative to pin 3 of XLR output connector. E2002, Shure Incorporated Power Requirements 11 to 52 Vdc phantom, 2.0 mA Environmental Requirements Operating Temperature Range: –18° to 57° C (0° to 135° F) Relative Humidity: 0 to 95% Dimensions (Figure 3) Weight MX412D: 0.81 kg (1.80 lbs.) net, 1.63 kg (3.62 lbs.) packaged MX418D: 0.82 kg (1.82 lbs.) net, 1.64 kg (3.64 lbs.) packaged Cable Type (figure 7) The attached custom cable contains a shielded audio pair and three unshielded conductors for logic control. Overall diameter=0.6 mm (0.165 in.) Certification Eligible to bear CE Marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments. REPLACEMENT PARTS Snap-Fit Foam Windscreen (4 per pkg.) RK412WS Foam Ball Windscreen Locking Metal Windscreen A99WS A412MWS Replacement 3 m (10 ft) XLR Cable Custom Logic Cable (specify length) Omnidirectional Cartridge Supercardioid Cartridge Cardioid Cartridge Base Plate Bumpers C120 15A523/1 R183B R184B R185B 80A8053A CM62-EZs-II In-Ceiling Speaker Preliminary Technical Information Key Features Preliminary Specifications: CM62-EZs-II System Type Impedance (nominal) Sensitivity dB @ 2.83 v/1 m Sensitivity dB @ 1 W/1m 1 Frequency Response (- 3 dB) 2 Frequency Response (-10 dB) 2 Max. Program Power 3 Max. Continuous Power RMS 4 Max. Power SPL @ 1 m 5 Coverage Angle (-6 dB @ 2 kHz) Coverage Angle (-6 dB @ 10 kHz) Coverage Angle (averaged 2 - 10 kHz) Directivity Factor (Q) Directivity Index (DI) dB Tap Selector Transducer - Low-Frequency Driver Transducer - High-Frequency Driver Low-Frequency Voice Coil Crossover Frequency Network Type: Low Pass Network Type: High Pass Enclosure Alignment Enclosure Material Grille Inputs Colors Backcan Diameter Backcan Height Visible Diameter Visible Height Mounting Hole Diameter Min. / Max. Ceiling Thickness Weight Shipping Weight Packaging Included Accessories Optional Accessories Regulatory - UL Regulatory - CE RoHS Tile bridge included 6.5-inch coaxial, in-ceiling, sealed (32-watt transformer for 25/70.7/100-volt or transformer bypass) 16 ohm 87.5 dB 90.5 dB 135 Hz - 22 kHz 75 Hz - 22 kHz 100 W 50 W 107.5 dB 140º 105º 80º 5.1 (averaged 100 Hz - 10 kHz) ; 5.2 (2 kHz) 6.2 dB (averaged 100 Hz - 10 kHz) ; 7.2 dB (2 kHz) Six-position rotary switch with transformer bypass position 165 mm (6.50 in) Treated fiber cone, cloth surround 25.4 mm (1.00 in ) Silk dome tweeter 25.4 mm (1.00 in) 4.0 kHz 12 dB per octave, 2nd order 6 dB per octave, 1st order Sealed Drawn steel backcan with ABS baffle Painted Steel (paintable) 4 position ceramic terminal strip Black or white 245.6 mm (9.67 in) 95.3 mm (3.75 in) 298.5 mm (11.75 in) 8.6 mm (0.34 in) 266.7 mm (10.50 in) 0.9 mm (0.04 in) – 40.6 mm (1.60 in) 3.2 kg (7.0 lbs) 3.6 kg (8.0 lbs) One per box Tile bridge, UL-listed flex conduit clamp, paint shield, hole template, wire nuts Pre-construction bracket (AC-CMEZ6/8-PCB); junction box (AC-CM-EZ-JBOX) 1480 (UEAY) and 2043 approved Approved Approved Transformer Taps 1 1 W 1 m sensitivity determined using nominal impedance 2 Frequency response measured in half or full space as dictated by speaker mounting configuration 3 4 5 Max program power is 3 dB above max continuous power Continuous power rating, EIA-426-B test 70.7 V Output 32 W 105.5 dB 100 V Output 32 W 105.5 dB 25 V Output 4 W 96.5 dB 16 W 102.5 dB 16 W 102.5 dB 2 W 93.5 dB 8W 99.5 dB 8W 99.5 dB 1 W 90.5 dB 4W 96.5 dB 4W 96.5 dB 0.5 W 87.5 dB 2W 93.5 dB Max output based on max continuous power © 2010 SoundTube Entertainment. All rights reserved. PN-TS-CMEZ REV 05.20.11 r &OHJOFFSFEGPSBQQMJDBUJPOTXJUIMJNJUFE QMFOVNTQBDF JODPSQPSBUJOHB4PVOE5VCFTQFDJGJDTIBMMPXCBDLDBOXJUIBO JOTUBMMFEEFQUIPGPOMZJODIFT r 0OFJO NN USFBUFEGJCFS XPPGFSXJUIDMPUITVSSPVOEBOEPOF JO NN TJMLEPNFUXFFUFS r &BTZBDDFTTTJYQPTJUJPOUBQTXJUDIGPS WPMUBOEPINUSBOTGPSNFS CZQBTTQPTJUJPOBMMPXTGPSFBTZPSEFSJOH TUPDLJOHBOEJOTUBMMBUJPO r 3FEVDFEBNQMJGJDBUJPODPTUTXJUINBYJNVNFGGJDJFODZJODMVEJOHE#TFOTJUJWJUZBOEPINJNQFEBODF r 4VQFSJPSWPJDFJOUFMMJHJCJMJUZXJUIB L)[DPWFSBHFBOHMFPG JOEFQFOEFOUMZWFSJGJFE r $PTUFGGFDUJWFPINTFUUJOHTBMMPXT GPSUIFVTFPGNVMUJQMFTPGUXP GPVS PSTJYTQFBLFSTJOBTZTUFNVTJOH BTUBOEBSEBNQMJGJFSXJUIPVUBUSBOT GPSNFS r *ODPSQPSBUFTBQBJOUFETUFFMHSJMMFGPS MBTUJOHEVSBCJMJUZ r "EBQUBCMFUPNBUFSJBMUIJDLOFTTFTSBOHJOHGSPNJODI NN mJODI NN r 6- 6&": BOE D6- $& &.$%JSFDUJWF&&$ &/ &/ BQQSPWFE r )JHIRVBMJUZCMBDLPSXIJUFQBJOUGJOJTI $VTUPNDPMPSTBWBJMBCMF(SJMMFJTQBJOUBCMF r *ODMVEFEBDDFTTPSJFT5JMFCSJEHF 6- MJTUFEJODIGMFYDPOEVJUDMBNQ QBJOU TIJFMEBOEUXPXJSFOVUT r 0QUJPOBMBDDFTTPSJFT$PMPSDPEFE HSFFO QSFDPOTUSVDUJPOCSBDLFU "$ $.&;1$# KVODUJPOCPY "$$. &;+#09 Description 5IF$.&;T**JTBJODI DPBYJBM UXPXBZ CMJOENPVOU JODFJMJOHTQFBLFS XIJDIEFMJWFSTUSVFIJHIFGGJDJFODZ BOEQFSGPSNBODFBDSPTTUIFPQFSBUJOH CBOEXJEUI#ZJODPSQPSBUJOHBJODI USFBUFEGJCFSESJWFSXJUIDMPUITVSSPVOE JOBTFBMFEESBXOTUFFMCBDLDBO UIJT TQFBLFSEFMJWFSTNBYJNVNGSFRVFODZ SFTQPOTF )[mL)[ E# JOB DPNQBDUEFTJHO .PVOUJOHIBSEXBSFJTJODMVEFEBOE GFBUVSFTBDPOTUBOUUFOTJPOXJOHFE NPVOUJOHTZTUFNXJUIBHBVHFiGVMM IPSCM Standard 2’ by 2’ Ceiling Tile Speaker Features Built in Web Server: • • Device Status • Field upgradable Easy Installation: • Only requires CAT 5 connection (up to 300ft) to network • Power over Ethernet (no power cord or adapter). No other equipment needed Multicast: • Full multicast and broadcast support. Send audio and/or scrolling text to individual, multiple, or all devices simultaneously. Sound Masking: • grammatically for sound masking IPSCM (Approx. 2’ x 2’) IP Speaker Overview Advanced Network Device’s (AND) 2x2 drop-in ceiling tile IP Speaker is a Power over Ethernet (PoE, PoE+) loudspeaker that requires only an RJ-45 connector to connect to existing data networks. Simultaneously broadcast to both phones and speakers. Built in microphone and speaker for two way communications. Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 • Phone: 847-463-2236 • Fax: 847-359-5418 Website: www.anetd.com • E-Mail: sales@anetd.com Two Way Communication: • Activate via ClockWise or third party software • Allows for full duplex hands free communication Supported Protocols • SIP • DHCP • IPv4 • IGMP • HTTP • ICMP • SLP • TCP/IP • TFTP • UDP • NTP • MDNS and MDNS-SD • SNMPV1 & SNMPV2c Software Options • AND Clockwise ! " for scheduling, alarms, events, stopwatch, timer, optional theme sound library, sending News/RSS/Twitter/Weather/Stock feeds, etc. • Third Party Software: AND has a long-standing relationship with InformaCast (SingleWire), and also supports IPSession (IPCelerate), SA-Announce (Syn-Apps), MessageNet Systems, BellCommander (AcroVista), and others. AND devices will also work with SIP-compatible products/PBX, such as Asterisk, 3CX, Shoretel, etc. • Multiple: Can run Clockwise and 3rd party software concurrently. • • • • • Weight: 6.5 lbs Approx: 2’x3”x2’ PoE (IEEE802.3af) 15.4 W or PoE+ (IEEE802.3at) 25.5 W 10/100 Mb network connection Speaker Size 8” Average Sensitivity 95dB, 1W/1M Audio Power 8 W / 16 W Frequency Response 60 Hz - 17 kHz Polar Plot See diagram 1 Diagram 1 8” Speaker Polar Plot 2 kHz Octave Band, Grid Spacing = 6dB/Division Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 • Phone: 847-463-2236 • Fax: 847-359-5418 Website: www.anetd.com • E-Mail: sales@anetd.com The Sapling Advantage EACH CLOCK HAS A REPEATER BUILT-IN - Since each clock has a repeater built right into each unit, there is no need for high power transmitters and repeaters. Each clock receives the wireless signal and sends out the time to its neighboring clock, making Sapling’s system unique and extremely accurate. RECEIVES SIGNAL FROM MULTIPLE PATHS - Since each clock has a repeater built-in, the wireless signal can be received from any clock in the signal’s radius. PATENTED FREQUENCY-HOPPING TECHNOLOGY - This patented technology allows each clock to frequency hop the transmission to all of the surrounding clocks, enabling it to receive the correct time, even if there is interference on any of the frequencies. NO FCC LICENSE - With Sapling’s wireless clocks operating on an open frequency range, there is no need to purchase costly FCC licenses, saving you thousands of dollars over the life of the system. WEB-BASED MASTER CLOCK - Program our web-based SMA Series Master Clock from anywhere with an internet connection. Its user-friendly web interface is simple to use and can be setup within minutes. FULLY COMPLIANT - All of Sapling’s wireless clocks have UL, cUL and FCC approval or pending status. We installed over 100 of the wireless synchronized clocks in our district two years ago and haven’t had one single problem. They are mission critical, reliable and key to effective scheduling within the Richard Follmer, Technology Coordinator, North Hanover Township Schools district. a ” Wireless System Description 1 Install and program the SMA Wireless Master Clock 2 The SMA Series Wireless Master Clock sends out the signal to the clocks in its radius 3 The clocks receive the signal and then send the signal to the surrounding clocks 4 The surrounding clocks receive the signal and retransmit the time to the clocks in its radius Sapling’s Wireless Clock System is the embodiment of innovation and reliability. Eliminating wiring throughout an entire facility can save you thousands of dollars on installation and also allows for retrofitting of an existing installation. While most wireless systems are limited to the range of the transmitter, Sapling’s is not. Our ingenious technology allows each clock to act as a transceiver, meaning the secondary clocks both receive and retransmit the signal, maximizing signal transmission distances. Because of the way this technology is utilized, the more clocks in an area increases the quality of the signal. The system starts with the SMA Series Wireless Master Clock which can receive time from any SNTP/NTP server or even a GPS satellite. The master clock then sends out a wireless signal to the analog and/or digital wireless clocks using Sapling’s frequency-hopping technology. Once the slave clocks receive the signal, it is then retransmitted to any of the clocks in the surrounding areas. Working on Sapling’s patented 915-928 MHz frequency-hopping technology, our system requires no FCC license, eliminating extraneous fees. The Wireless System allows multiple secondary clocks to use the same frequency range without interfering with other wireless products. SBL Series Wireless Digital Clocks Sapling’s SBL Series gives you the answer to your wireless digital clock needs. Working in conjunction with the SMA Series Wireless Master Clock, the SBL Series integrates seamlessly with the SAL-2 Series Wireless Analog Clocks. Working on Sapling’s 915-928 MHz frequency-hopping technology, the digital clocks will receive and transmit the signal once a minute. The innovative 915-928 MHz frequency-hopping technology allows for a better and clearer signal even if there is interference in one of the frequencies. Not only can each clock receive the wireless signal, it also transmits the signal which eliminates the need for many repeaters. The digital clocks are offered in a wide array of models featuring 2.5” or 4” high characters, as well as four or six digit displays. t Receives and transmits the signal once a minute t Each clock acts as a transceiver t Internal antenna t Counts down between classes or breaks with optional SMA 3000 Series Master Clock software tElapsed timer capabilities with Sapling’s Elapsed Timer (3200/3300 Series) t 915-928 MHz frequency-hopping technology t Immediate correction for time change t Available in different sizes t 2.5” display t 4” display t Four digit display t Six digit display t 12 or 24 hour format t Two levels of adjustable brightness t Loss of communication alert t Bright LED display SAL-2 Series Wireless Analog Clocks Sapling’s innovative SAL-2 Series Wireless Clocks incorporate multi-function software as well as a microprocessor based movement. Every clock is a transceiver, meaning it both receives the signal and retransmits it to the surrounding clocks. Since every clock is a transceiver, the clocks can not only get the time from the main transmitter, but also from the surrounding clocks. Sapling wireless clocks transmit a stream of data every two hours (standard) or four hours (economy) on the battery operated (2 D-cells) model, and every minute on the 24V, 110V and 220V models. These clocks include automatic calibration, as well as enhanced diagnostic functionality that allows the user to view the quality of the signal, amount of time since the clock last received a signal, a comprehensive analysis of the clock itself and remaining battery life. t Each clock acts as a repeater and transmitter t915-928 MHz frequency-hopping technology t Frequent correction t Receiving and transmission rate every two hours (normal mode) or four hours (economy mode) for battery operation t Receiving and transmission rate of once a minute for 24V, 110V or 220V t Internal antenna t Improved sensitivity over SAL-1 Series (previous model) t Enhanced diagnostic mode for informing the user of battery level, signal strength, and complete testing of the movement t Quick correction for time change (max. 5 minutes) t Ideal for renovation projects using existing wiring or for new installations t FCC Compliant, FCC part 15 Section 15,247 2011 Winner* Winner of the 2011 Good Design Award *As awarded by The Chicago Athenaeum: Museum of Architecture and Design. In the Permanent Design Collection of The Chicago Athenaeum: Museum of Architecture and Design. Wireless Repeater The Wireless Repeater is an ideal choice for extending the Sapling wireless signal when longer distances between clocks are present. Upon receipt of the wireless signal from the main transmitter or any Sapling clock in the field, the repeater can transmit up to a mile in open space which enables a broad transmission range to the subsequent slave clocks. The signal is transmitted once a minute and is capable of sending it to the SAL-2 Series Analog Wireless Clocks and the SBL Series Digital Wireless Clocks. Network Wireless Repeater The Network Repeater is the perfect solution for wireless systems in a campus or multiple building environments. The Network Repeater receives its time from the main transmitter in the system via a TCP/IP connection and transmits the signal out to the SAL-2 Series Analog Clocks and the SBL Series Digital Clocks. This feature allows the Network Repeater to not have to be within the wireless range of the main transmitter in the building. Boasting a slim profile design, the Network Repeater is capable of being mounted in a variety of different locations. t TCP/IP connection for integration with the main transmitter t Powerful transmission range - transmits up to a mile in open space! t Compact, slim design makes the Network Repeater versatile for mounting t Works on Sapling’s 915–928 MHz frequencyhopping technology t Transmits the Sapling wireless signal to the SAL-2 Series Analog Wireless Clocks and the SBL Series Digital Wireless Clocks SMA Series Wireless Master Clock Sapling’s SMA Series Wireless Master Clock is available in both a 2000 and 3000 version. The 3000 Series comes fully equipped with a crisp LED readout and a backlit, two line LCD display. Programming the SMA 3000 with up to 800 events is a breeze, thanks to the 2x8 rubber tactile keypad. The SMA 2000 Series features a bright LED display with two push buttons for simple programming. The SMA Series comes standard with SNTP/NTP capability for synchronization to any SNTP/NTP time source, or an optional GPS can be added for UTC synchronization. The SMA Series has a variety of additional options that can be purchased separately such as a fully functional web interface for controlling the master clock from any computer so schedules or features can be changed from anywhere. Other options include a SNTP/NTP server option that other devices can point to in order to receive time, or the ability to handle up to eight auxiliary relays which can be used for programming bell schedules, lights, and more. Standard Features t LED display for a clear, accurate readout t Two line, backlit LCD display with 20 characters per line with 2x8 rubber tactile keypad (SMA 3000 only) t RJ45 input for synchronization to any SNTP/NTP server t Wireless transmitter/repeater for correction of the Sapling wireless clocks tControl wired and wireless systems simultaneously t Interfaces with other systems t 12 or 24 hour mode t Automatic biannual Daylight Saving Time changes t Bias seconds option for adjusting the time to fit your application, while still receiving an input t RS485 input and output for time synchronization t Two relays for simultaneous correction of two synchronous wired clock systems SMA Series Options t GPS input for UTC synchronization t Four or eight configurable auxiliary relays with 800 event capability (SMA 3000 only) t Web interface software upgrade t Extremely intuitive graphical user interface that allows the user to configure all of the settings of the SMA Series Master Clock t Control all of the IP settings t View the complete list of pre-programmed events and schedules (SMA 3000 feature) t SNTP/NTP Server can be used as a time source for other networked devices t Countdown feature (SMA 3000 feature) t Digital clocks will count down a preset amount of time when the relay is activated DATASHEET AXIS M30 Network Camera Series Fixed mini domes with HDTV and 360°/180° panoramic views. > Compact, vandal- and dust-resistant design > Wide angle and 360°/ 180° panoramic views > HDTV video quality > Easy, flexible installation > Edge storage AXIS M30 Series addresses the market’s need for affordably priced, highly discreet and easy-to-install indoor fixed domes with HDTV performance and 360°/180° panoramic views. They are ideal for retail stores, hotels, schools and offices with tight budgets for video surveillance. Providing superb video quality, AXIS M30 cameras range from the palm-sized AXIS M3004-V and AXIS M3005-V with HDTV performance, to the wide-angle AXIS M3006-V with 3-megapixel resolution, and AXIS M3007-P/-PV, 5-megapixel fixed domes that provide a 360° view when ceiling mounted or 180° view when wall mounted. All AXIS M30 cameras are vandal- and dust-resistant except for AXIS M3007-P, and can be mounted on walls or ceilings. AXIS M3007-P is instead even more discreet with its smoke-detector look. AXIS M3004-V/M3005-V/ M3006-V cameras have a 3-axis camera angle adjustment for flexible installation. The three cameras also support Corridor Format for vertically oriented video streams that maximize coverage of areas such as corridors, hallways or aisles. All AXIS M30 cameras come focused at delivery. AXIS M30 cameras support AXIS Camera Application Platform for intelligent video applications such as people counting. AXIS M3006-V and AXIS M3007-P/-PV have substantial capacity for video analytics. The cameras offer a convenient video management solution with their built-in memory card slot for edge storage and support for software such as the complimentary AXIS Camera Companion. Simplifying installation, AXIS M30 cameras come with a 2 m (6.6 ft.) network cable and are powered using Power over Ethernet (IEEE 802.3af). Affordable, compact and easy-to-install fixed domes with superb video quality HDTV and multi-megapixel models 360°/180° fixed domes AXIS M30 cameras share a discreet form factor and are designed for quick and easy installation. The models—with different viewing angles, resolution, frame rate and intelligent video capacity—have been optimized to provide best-in-class performance for the different application needs of price-sensitive customers. AXIS M3007-P/-PV are 360°/180° fixed domes that can cover an area of more than 650 m2 (7,000 sq. ft.). They can be used to help detect activities, track the flow of people and improve area management. AXIS M3007-P/-PV cameras have a 5-megapixel sensor that enables detailed, high-quality 360° and 180° panoramic views. AXIS M3006-V not only supports HDTV 1080p but can also provide 3-megapixel video streams with 50% more resolution than HDTV 1080p. With a 134° angle of view, AXIS M3006-V can provide full coverage of an area when installed near a corner. Meanwhile, the palm-sized AXIS M3004-V and AXIS M3005-V provide the smallest form factor. AXIS M3004-V supports full frame rate 1-megapixel/HDTV 720p performance, while AXIS M3005-V delivers HDTV 1080p with more than double the resolution of HDTV 720p. AXIS M3007-P/-PV cameras support several viewing modes: 360° overview and dewarped views such as panorama, double panorama and quad views. The quad view mode is suitable, for instance, when the camera is positioned at an intersection of corridors. The camera also provides view area modes where users can digitally pan, tilt and zoom in on areas of interest. AXIS M3007-P/-PV: overview of a 240 m2 (2,600 sq. ft.) area AXIS M3006-V: corner view Digital PTZ and multi-view streaming The digital pan/tilt/zoom functionality in all AXIS M30 cameras can be seen as enabling the cameras to have a “digital varifocal lens” that allows the cameras’ angle of view to be adjusted remotely after the physical installation. This functionality is especially useful with AXIS M3006-V because of its wide angle of view and high resolution. When digital PTZ is used together with multi-view streaming in AXIS M3006-V, different areas of a scene can be cropped from the full view and streamed simultaneously for viewing or recording. Multi-view streaming simulates several virtual cameras and can help minimize the bit rate and storage needs. AXIS M3007-P/-PV: view area mode with digital pan/tilt/zoom functionality 3-axis camera angle adjustment AXIS M3004-V/M3005-V/M3006-V cameras have a 3-axis camera angle adjustment that enables users to: > mount the cameras on walls or ceilings > easily adjust the cameras’ direction > easily level the image > get vertically oriented video streams (Axis’ Corridor Format) Axis’ Corridor Format is achieved when the 3-axis camera angle adjustment is used together with the camera interface’s ability to rotate the image. The format optimizes the coverage of areas such as aisles, hallways and corridors, maximizing image quality while eliminating bandwidth and storage waste. Comparison of viewing angles 9:16 Corridor Format Approx. field of view comparison AXIS M3006-V Horizontal angle of view AXIS M3007-PV in wall-mount, panoramic view Ceiling Ceiling or or wall wall AXIS AXIS M3004-V M3004-V AXIS M3007-P/-PV: 187° AXIS M3006-V: 134° AXIS M3005-V: 118° AXIS M3004-V: 80° AXIS M3005-V AXIS M3006-V AXIS M3007-P 42 mm (1.7”) 53 mm (2.1”) 42 mm (1.7”) 85 mm (3.4”) AXIS M3004-V AXIS M3005-V Ø131 mm (5.2”) Ø131 mm (5.2”) Ø131 mm (5.2”) 65 mm (2.6”) Ø100 mm (4”) 51 mm (2”) 27 mm (1.1”) Dimensions AXIS M3007-PV Optional accessories White/black skin for the camera casing (All models except AXIS M3007-P) Optional lens and focus tool for AXIS M3004-V and AXIS M3005-V AXIS T91A Camera Holders 3/4” or 1.5” NPS for AXIS M3006-V and AXIS M3007-P/-PV AXIS P8221 Network I/O Audio Module AXIS Camera Companion (included), AXIS Camera Station and video management software from Axis' Application Development Partners (not included). See www.axis.com/products/video/software/ Technical Specifications – AXIS M30 Network Camera Series Camera Models AXIS M3004-V: 1 MP / HDTV 720p, vandal and dust resistant AXIS M3005-V: 2 MP / HDTV 1080p, vandal and dust resistant AXIS M3006-V: 3 MP / HDTV 1080p, vandal and dust resistant AXIS M3007-P: 5 MP, 360°/180°, discreet smoke-detector look AXIS M3007-PV: 5 MP, 360°/180°, vandal and dust resistant Note: AXIS M3011 and AXIS M3014 are handled separately from the new AXIS M30 Series Image sensor Lens Light sensitivity Shutter time Camera angle adjustment AXIS M3004-V: 1/4” progressive scan RGB CMOS AXIS M3005-V: 1/2.7” progressive scan RGB CMOS AXIS M3006-V: 1/3.6” (effective) progressive scan RGB CMOS AXIS M3007-P/-PV: 1/3.2” progressive scan RGB CMOS M12 mount, F2.8, fixed iris, megapixel resolution AXIS M3004-V: 2.8 mm, 80° horizontal angle of view AXIS M3005-V: 2.8 mm, 118° horizontal angle of view AXIS M3006-V: 1.6 mm, 134° horizontal angle of view AXIS M3007-P/-PV: 1.3 mm, 187° horizontal angle of view AXIS M3004-V/M3005-V: 1.5 - 100000 lux, F2.8 AXIS M3006-V/M3007-P/M3007-PV: 0.6 - 200000 lux, F2.8 AXIS M3004-V/M3005-V: 1/8000 s to 1/6 s AXIS M3006-V/M3007-P/M3007-PV: 1/24000 s to 2 s AXIS M3004-V/M3005-V: Pan ±175°, tilt ±45°, rotation ±175° AXIS M3006-V: Pan ±180°, tilt 0-45°, rotation ±178° AXIS M3007-P/-PV: Rotation ±180° Network Security Supported protocols System integration Open API for software integration, including VAPIX® and Application AXIS Camera Application Platform from Axis Communications, Programming available at www.axis.com Interface AXIS Video Hosting System (AVHS) with One-Click Camera Connection AXIS M3004-V/M3005-V/M3006-V: ONVIF, specification available at www.onvif.org Intelligent video Video motion detection, active tampering alarm AXIS Camera Application Platform enabling installation of additional applications (In AXIS M3007-P/-PV, additionally installed applications can be used in the 360° overview mode only) Event triggers Intelligent video, edge storage events Event actions Video Video compression H.264 Main Profile (MPEG-4 Part 10/AVC), Motion JPEG AXIS M3006-V/M3007-P/M3007-PV: Also H.264 Baseline Profile Resolutions AXIS M3004-V: 1280x800 (1 MP) to 320x240 AXIS M3005-V: 1920x1080 (HDTV 1080p) to 320x240 AXIS M3006-V: 2048x1536 (3 MP) to 160x120 AXIS M3007-P/-PV: 2592x1944 (5 MP) to 160x120 Frame rate AXIS M3004-V/M3005-V: 25/30 fps with power line frequency H.264/Motion JPEG 50/60 Hz AXIS M3006-V: 3 MP capture mode: 16/20 fps with power line frequency 50/60 Hz HDTV 1080p (1920x1080) and 2 MP 4:3 (1600x1200) capture modes: 25/30 fps with power line frequency 50/60 Hz AXIS M3007-P/-PV: 12 fps in 360° overview and panoramic views Video streaming Multiple, individually configurable streams in H.264 and Motion JPEG Controllable frame rate and bandwidth VBR/CBR H.264 Multi-view AXIS M3006-V: Up to 8 individually cropped out view areas. When streaming 4 view areas and 1 overview in VGA resolution, streaming the frame rate is 16/20 fps per stream with power line frequency 50/60 Hz (3 MP capture mode) AXIS M3007-P/-PV: 360° overview, panorama, double panorama, quad view. Up to 4 individually cropped out and dewarped view areas. When streaming 4 dewarped view areas and one 360° overview in VGA resolution, the frame rate is 10 fps per stream Pan/Tilt/Zoom AXIS M3004-V/M3005-V: Digital PTZ AXIS M3006-V: Digital PTZ, preset positions, guard tour AXIS M3007-P/-PV: Digital PTZ with dewarping, preset positions, guard tour Image settings Compression, color, brightness, sharpness, contrast, white balance, exposure control, backlight compensation, wide dynamic range - dynamic contrast, text and image overlay, privacy mask, mirroring of images AXIS M3006-V/M3007-P/M3007-PV: Exposure zones, finetuning of low light behavior AXIS M3004-V/M3005-V/M3006-V: Rotation: 0°, 90°, 180°, 270°, including Corridor Format AXIS M3007-P/-PV: Rotation: 0°, 180° * This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (www.openssl.org) More information is available at www.axis.com Password protection, IP address filtering, HTTPS* encryption, IEEE 802.1X network access control, digest authentication, user access log IPv4/v6, HTTP, HTTPS*, SSL/TLS*, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS Data streaming Built-in installation aid General Casing Memory Power Connectors Edge storage Operating conditions Approvals Weight Included accessories File upload: FTP, HTTP, network share and email Notification: email, HTTP and TCP Video recording to edge storage Pre- and post-alarm video buffering AXIS M3006-V/M3007-P/M3007-PV: Go to PTZ preset, guard tour Event data Pixel counter Casing color: white NCS S 1002-B; encapsulated electronics AXIS M3004-V/M3005-V: IP42 water- and dust-resistant, IK08 impact-resistant, polycarbonate/ABS casing AXIS M3006-V/M3007-PV: IP42 water- and dust-resistant, IK08 impact-resistant, aluminum and polycarbonate/ABS casing AXIS M3007-P: Discreet, smoke-detector like design, aluminum and polycarbonate/ABS casing without AXIS M3004-V/M3005-V: 256 MB RAM, 128 MB Flash AXIS M3006-V/M3007-P/M3007-PV: 512 MB RAM, 128 MB Flash Power over Ethernet IEEE 802.3af AXIS M3004-V: Class 1, max. 2.2 W AXIS M3005-V: Class 1, max. 2.7 W AXIS M3006-V: Class 2, max. 4.5 W AXIS M3007-P/-PV: Class 2, max. 4.6 W Male RJ-45 10BASE-T/100BASE-TX PoE on a 2 m (6.6 ft.) network cable MicroSD/microSDHC/microSDXC slot supporting memory card up to 64 GB (card not included); support for recording to network share (network-attached storage or file server) Humidity 15 - 85% RH (non-condensing) AXIS M3004-V/M3006-V/M3007-P/M3007-PV: 0 ºC to 45 ºC (32 ºF to 113 ºF) AXIS M3005-V: 0 ºC to 40 ºC (32 ºF to 104 ºF) EN 55022 Class B, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22, IEC/EN 69050-1 All models except AXIS M3007-P: KCC Class B, UL 60950-1, IEC 60529 IP42, IEC 62262 Class IK08 AXIS M3004-V/M3005-V: 200 g (0.44 lb.) AXIS M3006-V: 640 g (1.4 lb.) AXIS M3007-P: 570 g (1.3 lb.) AXIS M3007-PV: 610 g (1.4 lb.) Drill hole template, Installation Guide, Installation and Management Software CD, Windows decoder 1-user license, Torx L-key ©2012 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice. 49979/EN/R1/1212 www.axis.com DATASHEET AXIS P33 Network Camera Series — Outdoor models Fixed domes for any environment with remote focus and zoom. > 5MP and HDTV > WDR and Lightfinder > Built-in IR illumination > Remote focus and zoom > P-Iris control > IK10 impact-resistant, outdoor-ready models AXIS P33 Network Cameras constitute a series of indoor and outdoor-ready fixed domes. These cameras are ideal for unobtrusive video surveillance, day and night, in exposed areas such as city surveillance, airports, railway stations, retail stores, office buildings, museums, schools and university campuses. AXIS P33 Series offers models with exceptional image quality from SVGA resolution up to 5 megapixel, including SMPTE-compliant HDTV 720p and 1080p video. AXIS P33 Series provides multiple, individually configurable H.264 and Motion JPEG video streams. The SVGA and HDTV 720p/1MP models support Axis’ Lightfinder technology, which makes these cameras extremely sensitive to low light. AXIS P3384-VE that additionally supports wide dynamic range (WDR) with ‘dynamic capture’, provides outstanding video quality in the most demanding conditions with strong variations in light. The 5 megapixel model, AXIS P3367-VE, can cover a large area with exceptional detail and light sensitivity. All AXIS P33 models support P-Iris control for optimal image clarity. AXIS P3364-LVE incorporates new long-life LED technology that is highly power-efficient. Adjustable in angle and intensity, the built-in IR solution offers easy configuration optimizing for the scene. All AXIS P33 cameras support the remote focus capability that eliminates hands-on focusing at the camera, and remote zoom that allows the camera’s angle of view to be optimized. All AXIS P33 cameras offer digital pan/tilt/zoom and the 3-megapixel and 5-megapixel models additionally provide multi-view streaming. The weatherproof AXIS P33-VE/-LVE cameras have low, environmentalfriendly power consumption supplied by standard Power over Ethernet (IEEE 802.3af), and operate in a wide temperature range from -40 °C to 55 °C (-40 °F to 131 °F). Fixed domes designed for efficient installation Outdoor-ready models of AXIS P33 Series are the perfect choice for a wide range of demanding video applications. AXIS P33 Network Cameras are designed for professional video surveillance with easy and reliable installation in focus. Outdoor-ready installation for tough climates The outdoor models of AXIS P33 Series are specially designed for reliable, vandal-resistant and weatherproof installation, with pre-installed heater and fan, and an integrated dehumidifying membrane eliminating any humidity caught in the camera casing during installation. These cameras come with a 5 m (16 ft.) Ethernet cable with a pre-mounted, specially designed gasket, enabling flush wall mounting and requiring no additional sealant. A weather shield is also included for effective protection against reflections from sunlight, or build-ups of rain or snow; except for the AXIS P3364-LVE model, for which the shield could interfere with the built-in IR illumination. A wide range of optional mounting kits are available, for example for mounting on a wall, pole or corner. Built-in IR illumination AXIS P3364-LVE features built-in IR illumination based on new, long-life LED technology that is highly powerefficient. This results in high-quality, low-noise video also when the environment is completely dark. P-Iris control AXIS P33 Series features the advanced precise iris control that comprises a special P-Iris lens, together with dedicated software in the camera, to set the best iris position for optimal depth of field, resolution, image contrast and clarity. Good depth of field implies that objects at different distances from the camera are in focus simultaneously. For more on P-Iris and iris control, go to: www.axis.com/corporate/corp/tech_papers.htm Easy installation Lightfinder technology The SVGA and HDTV 720p/1MP models of AXIS P33 Series incorporate Axis’ unique Lightfinder technology. The outstanding light sensitivity, with maintained colors even in very poor lighting conditions, is obtained by a combination of Axis’ expertise in image processing, system-on-chip development and selection of the best optical components. For more on Lightfinder technology, go to: www.axis.com/corporate/corp/tech_papers.htm Wide dynamic range - dynamic capture AXIS P3384-VE that supports WDR with ‘dynamic capture’ is ideal for surveillance in areas with strong variations in light, for instance in tunnel passages, and other areas where the sunlight creates both very bright zones and dark shadows. AXIS P3384-VE enables easy and clear identification of people and objects both in bright and dark areas. AXIS P33 Network Cameras offer unique installation capabilities including remote focus and zoom. The remote focus feature enables convenient focusing over the network, eliminating the need for hands-on finetuning at the camera. The remote zoom functionality ensures that the camera’s angle of view is optimized for the area to be monitored. The pixel counter assures that the required pixel resolution is met. The built-in IR solution in AXIS P3364-LVE automatically adapts the illumination angle with the zoom level, which simplifies installation. Technical Specifications – AXIS P33 Network Camera Series, outdoor models Camera Outdoor models Image sensor Lens Day and night Minimum illumination Shutter time Camera angle adjustment Video Video compression Resolutions Frame rate H.264/ Motion JPEG Video streaming AXIS P3363-VE: SVGA, Lightfinder AXIS P3364-VE: 1 MP, Lightfinder AXIS P3364-LVE: 1 MP, IR illumination, Lightfinder AXIS P3384-VE: 1 MP, WDR - dynamic capture, Lightfinder AXIS P3346-VE: 3 MP, multi-view streaming AXIS P3367-VE: 5 MP, multi-view streaming Note: All models are vandal resistant and support audio and I/O ports 6 mm and 12 mm as suffix refer to lens model AXIS P3363-VE: Progressive scan RGB CMOS 1/3” AXIS P3364-VE/-LVE: Progressive scan RGB CMOS 1/3” AXIS P3384-VE: Progressive scan RGB CMOS 1/3” AXIS P3346-VE: Progressive scan RGB CMOS 1/3” (effective) AXIS P3367-VE: Progressive scan RGB CMOS 1/3.2” Varifocal, remote focus and zoom, P-Iris control, IR corrected, megapixel resolution AXIS P3363-VE/P3364-VE 6 mm: 2.5-6 mm, 105° - 49° view*, F1.2 AXIS P3363-VE/P3364-VE/P3364-LVE 12 mm: 3.3-12 mm, 82° - 24° view*, F1.4 AXIS P3384-VE: 3-9 mm, 84° - 30° view*, F1.2 AXIS P3346-VE: 3-9 mm, 84° - 30° view*, F1.2 AXIS P3367-VE: 3-9 mm, 84° - 30° view*, F1.2 *horizontal angle of view Automatically removable infrared-cut filter AXIS P3363-VE/P3364-VE 6 mm: Color: 0.1 lux, F1.2, B/W: 0.02 lux, F1.2 AXIS P3363-VE/P3364-VE 12 mm: Color: 0.15 lux, F1.4, B/W: 0.03 lux, F1.4 AXIS P3364-LVE 12 mm: Color: 0.18 lux, F1.4, B/W: 0.04 lux, 0 lux with IR illumination on AXIS P3384-VE: Color: 0.5 lux, F1.2, B/W: 0.08 lux, F1.2 with dynamic capture Color: 0.15 lux, F1.2, B/W: 0.03 lux, F1.2 with Lightfinder AXIS P3346-VE: Color: 0.5 lux, F1.2, B/W: 0.08 lux, F1.2 AXIS P3367-VE: Color: 0.2 lux, B/W: 0.04 lux, F1.2 AXIS P3363-VE/P3364-VE/P3364-LVE: 1/24500 s to 2 s with power line frequency 50 Hz, 1/29500 s to 2 s with power line frequency 60 Hz AXIS P3384-VE: Dynamic capture: 1/192 s to 1/37 s with power line frequency 50 Hz, 1/231 s to 1/44 s with power line frequency 60 Hz; Lightfinder: 1/24500 s to 2 s with power line frequency 50 Hz, 1/29500 s to 2 s with power line frequency 60 Hz AXIS P3346-VE: 1/35500 s to 1/6 s AXIS P3367-VE: 1/28000 s to 2 s AXIS P3363-VE/P3364-VE/P3364-LVE: Pan 360°, tilt 170°, rotation 340° AXIS P3384-VE/P3346-VE/P3367-VE: Pan 360°, tilt 160°, rotation 340° Multi-view streaming Pan/Tilt/Zoom Image settings Audio Audio streaming Audio compression Audio input/ output Network Security Supported protocols Compression, color, brightness, sharpness, contrast, white balance, exposure control, exposure zones, backlight compensation, WDR dynamic contrast, fine tuning of low light behavior Rotation: 0°, 90°, 180°, 270°, including Corridor Format Text and image overlay, privacy mask, mirroring of images AXIS P3384-VE: WDR - dynamic capture: Up to 120 dB (0.5 - 500,000 lux) depending on scene Two-way AAC LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz Configurable bit rate External microphone input or line input, line output Password protection, IP address filtering, digest authentication, user access log, IEEE 802.1X** network access control, HTTPS** encryption IPv4/v6, HTTP, HTTPS**, SSL/TLS**, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP™, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS System integration Open API for software integration, including the ONVIF specification Application available at www.onvif.org, as well as VAPIX® and AXIS Camera Programming Application Platform from Axis Communications, specifications Interface available at www.axis.com Support for AXIS Video Hosting System (AVHS) with One-Click Camera connection Intelligent video Video motion detection, active tampering alarm, audio detection Support for AXIS Camera Application Platform enabling installation of additional applications Event triggers Intelligent video, external input, edge storage events Event actions H.264 Baseline and Main Profile (MPEG-4 Part 10/AVC) Motion JPEG AXIS P3363-VE: 800x600 (SVGA) to 160x90 AXIS P3364-VE/P3364-LVE/P3384-VE: 1280x960* (approx. 1.3 MP) to 160x90 AXIS P3346-VE: 2048x1536 (3 MP) to 160x90 AXIS P3367-VE: 2592x1944 (5 MP) to 160x90 *1400x1050 (1.4 MP) scaled resolution available via VAPIX® AXIS P3363-VE/P3364-VE/P3364-LVE/P3384-VE: 25/30 fps with power line frequency 50/60 Hz AXIS P3346-VE: 3 MP capture mode: 20 fps in all resolutions; HDTV 1080p (1920x1080) and 2 MP 4:3 (1600x1200) capture modes: 30 fps in all resolutions AXIS P3367-VE: 5 MP capture mode: 12 fps in all resolutions; and capable of all AXIS P3346-VE capture modes Multiple, individually configurable streams in H.264 and Motion JPEG Controllable frame rate and bandwidth VBR/CBR H.264 AXIS P3346-VE/P3367-VE: Up to 8 individually cropped out view areas AXIS P3346-VE: When streaming 4 view areas and 1 overview in VGA resolution, the frame rate is 20 fps per stream (3 MP capture mode) AXIS P3367-VE: When streaming 4 view areas and 1 overview in VGA resolution, the frame rate is 12 fps per stream (5 MP capture mode) or 20 fps per stream (3 MP capture mode) Digital PTZ, preset positions, guard tour Data streaming Built-in installation aids File upload: FTP, HTTP, network share and email Notification: email, HTTP and TCP External output activation Video and audio recording to edge storage Pre- and post-alarm video buffering Play audio clip PTZ preset, guard tour AXIS P3364-LVE: Activation of IR illumination Event data Remote zoom, remote focus, pixel counter AXIS P3364-LVE: adjustable IR illumination angle and intensity ** This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (www.openssl.org) 49387/EN/R1/1211 www.axis.com Technical Specifications (cont.) – AXIS P33 Network Camera Series, outdoor models Edge storage General Casing Polycarbonate transparent cover Aluminum inner camera module with encapsulated electronics Color: white NCS S 1002-B IP66- and NEMA 4X-rated, IK10 impact-resistant casing with aluminum base and dehumidifying membrane 256 MB RAM, 128 MB Flash AXIS P3367-VE: 512 MB RAM, 128 MB Flash Memory Power Power over Ethernet IEEE 802.3af AXIS P3363-VE/P3364-VE/P3364-LVE/P3384-VE/P3367-VE: Class 3; max 12.1 W AXIS P3346-VE: Class 3; max 12.8 W RJ-45 10BASE-T/100BASE-TX PoE Terminal block for 1 alarm input and 1 output 3.5 mm mic/line in, 3.5 mm line out AXIS P3364-LVE: Power-efficient, long-life IR LED’s with adjustable angle of illumination and intensity. Range of reach up to 30 m (100 ft.) depending on scene Connectors IR illumination Operating conditions Approvals Included accessories SD/SDHC/SDXC slot supporting memory cards up to 64 GB (card not included) Support for recording to network share (network-attached storage or file server) -40 °C to 55 °C (-40 °F to 131 °F) Humidity 10 - 100% RH (condensing) EN 50121-4, EN 55022, EN 55024, EN 61000-6-1, EN 61000-6-2, IEC/EN/UL 60950-1, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-214, IEC 60068-2-27, IEC 60068-2-64, IEC 60068-2-78, IEC 60529 IP66, NEMA 250 Type 4X, IEC 62236-4, IEC 62262 IK10, FCC Part 15, Subpart B Class B, ICES-003 Class B digital, VCCI, ITE, C-tick AS/NZS CISPR 22, KCC AS/NZS CISPR 22, KN 22, KN 24 AXIS P3364-LVE: EN 62471 Installation Guide, Installation and Management Software CD, Windows decoder 1-user license, connector kit, mounting bracket, 5 m (16 ft.) network cable with pre-mounted gasket AXIS P3363-VE/P3364-VE/P3384-VE/P3346-VE/P3367-VE: Weather shield, smoked transparent cover More information is available at www.axis.com Dimensions and weight - AXIS P33 Network Camera Series, outdoor models AXIS P3363-VE, P3364-VE Weight: 1.5 kg (3.3 lb.), with weather shield AXIS P3364-LVE: Weight: 1.4 kg (3.1 lb.), weather shield not included AXIS P3384-VE, AXIS P3346-VE, AXIS P3367-VE Weight: 1.7 kg (3.7 lb.), with weather shield 123 mm (4.8") 60 mm (2.4”) 60 mm (2.4”) 110 mm (4.3”) 119 mm (4.7”) 96 mm (3.8’’) 117 mm (4.6") 178 mm (7.0’’) 178 mm (7.0”) 96 mm (3.8’’) Accessories - AXIS P33 Network Camera Series, outdoor models Optional accessories for outdoor models Pendant adapter kit including weather shield AXIS Camera Companion (included), AXIS Camera Station and video management software from Axis’ Application Development Partners (not included). For more information, see www.axis.com/products/video/software Wall I/O audio cable, 5 m (16 ft.) Video management software AXIS T91A Brackets Axis illuminators Corner Cable shield, optionally including AXIS P33-VE 3/4” NPS adapter ©2012 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice.

DD Cut Sheets, 5-13-13 - Christenson Corporation

Related documents

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib