P A R C H E M
C O N S T R U C T I O N
Product Selection CHARTS
S U P P L I E S
Application
Concrete repair &
durability,
Corrosion control,
Protective coatings,
Grouts & anchors
Solution
Industrial flooring &
Surface treaments
Jointing systems,
sealants & waterstops
Waterproofing &
Architectural coatings
Decorative concrete
products
Selection Guide Contents
n
n
n
n
n
n
n
n
n
n
n
n
Concrete Repair & Durability
Corrosion Control
Protective Coatings
Grouts & Anchors
Floor Surface Treatments
Joint Sealants
Joint Fillers
Concrete Jointing
Waterstops
Waterproofing & Architectural Coatings
New Concrete Treatments
Existing Concrete Treatments
The following Selection Charts are provided to assist you in determining more easily which product(s) and system(s)
are suitable for the nominated construction applications. You should always refer to the more complete product
information contained within each product’s Technical Data Sheet (TDS) before finalising your selection choice.
To obtain a product TDS and MSDS, please contact Parchem Construction Supplies Sales on: 1800 801 108; or visit our website @ www.parchem.com.au.
concrete repair & durability Product Selection
Application
Solution
Fairing coat screeds
General purpose, concrete repair mortar
Patch repair mortar, for 30-45 MPa
substrates, medium build, very low
shrinkage
Renderoc FC
Provide architectural, very smooth cementitious finish
Renderoc FC Architectural
General purpose, high build, concrete repair mortar
Renderoc HB
Patch repair mortar for 15-30 MPa substrates /
lightweight for overhead applications (Galvashield XP
suitable*)
Renderoc HB25*
Patch repair mortar for 30-45 MPa substrates / high
protection / medium build (Galvashield XP suitable*)
Renderoc HB40*
Patch repair mortar for > 45 MPa substrates / high
protection / high build (Galvashield XP suitable*)
Renderoc HB70*
Hand trowel applied
Hand trowel applied
Patch repair mortar, for 15-30 MPa
substrates, lightweight, very low shrinkage
Concrete Repair
Cementitious
Mortars
Fill blowholes / provide very smooth surface
Trowel or wet spray applied
Patch repair mortar, for > 45 MPa substrates,
high build, very low shrinkage
Repair mortar, very fast setting
Hand trowel applied
Very fast setting repair mortar / traffic in 2 hrs
Renderoc Rapid
Repair mortar, for large volume / congested
reinforcement / or complex architectural
details, applications, very low shrinkage
Formed & poured or
pumped
Free flowing / self compacting / micro-concrete, repair
/ reprofiling mortar (Galvashield XP suitable*)
Renderoc LA55*
Dry spray applied
High build / high strength / economical repair mortar
Guncrete E
Hand trowel applied
Bridge bearing pad mortar
Renderoc BB
Dry spray mortar, for large volume
applications, high build / high strength
Bridge bearing pad mortar
* These repair mortars exhbit low resistivity of <15,000
ohm.cm, and are Galvashield suitable.
concrete repair & durability Product Selection
Application
Concrete Durability
Systems
Solution
Controlled permeability formwork (CPF)
liner system
Formwork attached
Polypropylene membrane formwork liner, to provide
high quality, durable concrete surface
Zemdrain
Concrete reinforcement spacer systems,
extruded concrete fibre, for concrete
formwork & steel reinforcement
Reinforcement attached &
positioned
Extruded concrete fibre, single & bar spacer systems
to provide high quality, durable concrete
Concrete Fibre Spacers
Epoxy resin, blow hole and repair, fairing mortar
Nitomortar BH
Multi-purpose, epoxy adhesive repair paste
Nitomortar AP
Solvent free, general purpose, epoxy binder system
Nitomortar 903
General purpose, high strength, epoxy repair mortar
Nitomortar 908
High strength, high chemical / abrasion resistant
epoxy lining mortar (5-12mm thickness)
Nitomortar EL
Epoxy fairing screed
Epoxy adhesive, repair paste
Epoxy binder system
Hand trowel applied
Epoxy repair mortar
Concrete Repair
Epoxy Mortars
Chemical & abrasion resistant, epoxy lining
mortar
High build, epoxy lining mortar, chemical &
abrasion resistant
Primed, hand applied /
trowel finished
High build, chemical / abrasion resistant epoxy repair
mortar (5-50mm thickness)
Nitomortar EL-HB
High build spray, epoxy lining mortar, large
area, chemical & abrasion resistant
Spray applied / trowel
finished
High build, chemical / abrasion resistant epoxy lining
mortar (3-20mm thickness)
Nitomortar ELS
Epoxy, crack-injection system
Dual cartridge applied
Low viscosity, epoxy crack-injection system
Nitofill LV
corrosion control Product Selection
Application
Solution
Patch repair, galvanic zinc anodes, to protect
steel reinforcement from incipient anode
corrosion initiation
Corrosion Control
Systems
Drilled & grouted, galvanic zinc anodes, to
control initiated corrosion in, as yet, unspalled concrete
Tie wired onto
reinforcement
Drilled hole, inserted,
grouted
Chloride ion cathodic prevention for tight
reinforcement locations
Galvashield XPT
Chloride ion cathodic prevention
Galvashield XP
Medium chloride ion content environment
Galvashield XP2
High chloride ion content environment
Galvashield XP4
Inserted, sacrificial zinc anodes to control initiated
corrosion of reinforcement steel in un-spalled chloride
ion contaminated areas
Galvashield CC65
Galvashield CC100
Formed & poured /
pumped
Galvanic, cathodic protection and repair system for
marine piles and semi-submerged structures
Galvashield LJ
Distributed anode strips, for large area,
cathodic prevention & protection
Drilled slot, inserted,
grouted
Galvanic, distributed strip anode system for
cathodic protection corrosion control of high chloride
ion affected structures
Galvanode DAS
Impressed current cathodic
protection (ICCP) discrete anode system
Drilled slot, inserted,
grouted
High performance discrete anodes for ICCP corrosion
control of high chloride ion affected structures
Ebonex
Marine pile, jacket repair & long term
cathodic protection system
protective coatings Product Selection
Application
Concrete &
Masonry AntiCarbonation
& Chloride
Ion, Protective
Coatings
Solution
High performance, carbonation & chloride
ion protection, aliphatic acrylic, pigmented
coating
Brush, roller, spray applied
Solvent based, high performance, chloride ion &
carbonation protective coating system for concrete
Dekguard S
Highly flexible coating for substrate subject
to cracking / movement (up to 6mm),
elastomeric, acrylic, pigmented coating
Brush, roller, spray applied
Water based acrylic, breathable, chloride ion &
carbonation protective coating system for concrete
Dekguard Elastic
Flexible coating for substrate subject to
cracking / movement (up to 2mm), acrylic,
pigmented, protective coating
Brush, roller, spray applied
Water based acrylic, breathable, chloride ion &
carbonation protective coating system, for concrete &
masonry, crack accommodating (up to 2mm)
Dekguard E2000
Translucent, aliphatic acrylic, protective
coating
Brush, roller, spray applied
Solvent based, translucent, chloride ion & carbonation
protective coating system, for concrete
Dekguard O
Clear, methacrylate, protective, coating
Brush, roller, spray applied
Solvent based, clear, chloride ion & carbonation
protective coating system, for concrete & masonry
Dekguard Clear
Architectural protective facade coating &
waterproofing membrane, elastomeric,
water based acrylic, with full colour range
Brush, roller, spray applied
Highly flexible, water borne acrylic coating + waterproofing
membrane, with outstanding protective properties against Chloride
ion & Carbonation attack, for concrete & masonry structures
Emer-Clad
Architectural protective facade coating,
water based acrylic, flexible, with full colour
range
Brush, roller, spray applied
Flexible, water borne acrylic facade coating, with
excellent protective properties against chloride ion &
carbonation attack, for concrete & masonry structures
Emer-Impact
Fire retardant protective coating for
concrete & masonry surfaces
Brush, roller, spray applied
Water based, elastomeric, fire retardant coating to AS
1530 Part 3, for concrete, masonry, polyurethane &
styrene foam insulation, pipe lagging
Emer-Clad Firecheck
protective coatings Product Selection
Application
Solution
Clear, masonry & concrete, penetrating,
water repellant, silane-siloxane
Concrete & Masonry,
Anti-Chloride Ion,
Impregnating
Treatments
Chemical Resistant
Protective Coatings
Economical, penetrating, hydrophobic, silane-siloxane,
water repellant treatment for masonry
Nitocote SN502
Clear liquid, deeply impregnating, Iso-butyltriethoxy
silane, water & choride ion repellant, treatment for
reinforced concrete
Emer-Stop S100N
Clear, reinforced concrete, deeply
impregnating thixotropic creme, water
repellant, IOTEO silane treatment
Water dispersed, deeply impregnating, thixotropic creme
(white turning to clear), Iso-octyltriethoxy silane, water &
choride ion repellant, treatment for reinforced concrete
Emer-Stop Creme
Potable water certified, protective coating
system, for concrete / steel
Solvent free, epoxy resin coating system for potable
water retaining structures on concrete & steel
Nitocote EP405
Highly chemical resistant, solvent free, epoxy coating
system, for concrete & steel applications
Nitocote EP410
Clear, reinforced concrete, deeply
impregnating liquid, water repellant, IBTEO
silane treatment
Brush, roller, spray applied
Brush, roller, spray applied
Chemical resistant, protective coating, for
concrete / steel
grout & anchor Product Selection
Application
Solution
Economical, void filling grout
(for grouting gaps 10-100mm)
Flowable grout, plastic state shrinkage compensated
only (55MPa @ 28 days*)
Construction Grout
Flowable grout, plastic state shrinkage compensated
only (65MPa @ 28days *)
Conbextra GP
Underwater specialist grout, plastic state shrinkage
compensated only, with anti-washout (53MPa @ 28
days*)
Conbextra UW
General purpose, flowable grout
(for grouting gaps 10-100mm)
Flowable, both plastic & hardened state shrinkage
compensated grout (60MPa @ 28 days*)
Conbextra C
High flow, precision grout
(for grouting gaps 10-125mm)
Fluid, both plastic & hardened state shrinkage
compensated, high performance, precision grout
(65MPa @ 28 days*)
Conbextra HF
Flowable, ultra high strength, both plastic & hardened
state shrinkage compensated, precision grout (80MPa
@ 28 days*)
Conbextra HS
High early strength, rapid setting, flowable, hardened
state shrinkage compensated grout, for gaps (25MPa
@ 2 hours*)
Conbextra HES
Flowable, precision grout, both plastic & hardened
state shrinkage compensated (60MPa @ 28 days*)
Conbextra Deep Pour
General purpose, class A grout
(for grouting gaps 10-100mm)
Underwater grout
(for grouting gaps 10-150mm)
Cementitious
Grouts
High strength, precision grout
(for grouting gaps 10-125mm)
Formed & dry pack,
trowelled, flowed &
pumped
Formed, flowed & pumped
Formed, & dry pack,
trowelled, flowed or
pumped
High early strength, precision grout
(for grouting gaps 15-150mm)
Deep pour thicknesses, high volume,
precision grout (for gaps 20-500mm)
* Compressive strengths expressed are at flowable
consistency @ 23OC
Soil stabilisation grout
Bridge bearing pad mortar
Pump injection into soil
Ultra-superfine, economical, injection grout for
stabilising & strengthening soil / sand substrates
Alofix-MC
Trowel applied
Bridge bearing pad mortar for bridges
Renderoc BB
grout & anchor Product Selection
Application
Solution
Low viscosity, crack filling epoxy resin
(for grouting gaps 0.25-10mm)
Low viscosity grout (83MPa @ 7 days)
Conbextra EP10
Epoxy grout for dynamic / repetitive load applications
& chemical resistance (91MPa @ 7 days)
Conbextra EP40
Epoxy resin grout
(for grouting gaps 35-65mm)
Epoxy grout for dynamic / repetitive load applications &
chemical resistance (90MPa @ 7 days)
Conbextra EP65
Epoxy resin grout
(for grouting gaps 60-120mm)
Low exotherm, high volume, epoxy grout for dynamic /
repetitive load applications & chemical resistance
(75MPa @ 28 days)
Conbextra EP120
High temperature epoxy grout
(for grouting gaps 10-120mm)
Epoxy grout for low creep characteristics under
sustained loading & elevated temperatures
(110 Mpa @ 28 days @ 35OC)
Conbextra EPHT
Free flowing, water displacing epoxy grout for
underwater grouting applications (90Mpa @ 7 days)
Conbextra EP935
Economical, polyester resin, injection
adhesive anchoring system
Polyester anchoring threaded rod and reinforcing bars
into concrete & masonry
Powers KF2
Versatile, polyester resin, injection
anchoring system
Solid & hollow substrate injection anchor system for
threaded rods, starter bars. Low odour, no VOC’s
Powers AC100e
High performance, vinyl ester injection
anchoring system
Weather versatile, solid & hollow substrate injection
anchor system for threaded rods and starter bars. No
VOC’s. Chemical resistant
Powers AC100 PRO
High strength pure epoxy, injection adhesive
anchoring system
Epoxy anchoring threaded rod, bolts, and reinforcing
bars into concrete & masonry. Low odour, no VOC’s,
with long gel / working time, and fire rated
Powers PF PRO
Epoxy resin grout
(for grouting gaps 10-40mm)
Epoxy Grouts
Form & pour
Form & pour
Underwater epoxy grout
(for grouting gaps 12-30mm)
Anchoring Systems
Co-axial cartridge with
static mixer nozzle
floor surface treatments Product Selection
Application
Solution
Conforms to AS 3799 ≥ 90% water retention & RTA
3203, hot pour asphalt suitable
Concure HR90
Conforms to AS 3799 ≥ 90% water retention for
concrete curing & priming coat for asphalt & bitumen
overlays
Concure B90
Road, pavement, bridge & water retaining
structures curing, water based wax
emulsion (AS 3799)
Conforms to AS 3799 ≥ 90% water retention
Concure WB30
Resin & surfactant blend, emulsified in
water, curing agent, easily removed for after
trades
Conforms to AS 3799 ≥ 90% water retention,
increased abrasion, dusting resistance
Concure X90
General construction, internal & external
curing, water based acrylic (AS 3799)
Conforms to AS 3799 ≥ 90% water retention,
environmentally friendly
Concure A99
Floor curing / sealing / chemical resistance,
75% water retention to AS 3799
Concure CR
Polymer emulsion, economical, 35% water retention
to AS 3799
Concure P
Cures freshly laid concrete using no harmful
chemicals
Concure Eco
Evaporative retarder to reduce shrinkage cracking in
plastic concrete during placement
Concure AV
Road, pavement, bridge curing, hydrocarbon
resin based (AS 3799)
Road, pavement, bridge decks, bitumen &
hydrocarbon resin blend in water (AS3799)
Concrete Curing
Compounds
Seals, hardens, cures, new concrete floors,
chlorinated rubber based
Spray applied
Spray applied
Economical, polymer, curing for internal
applications only
Environmentally friendly, curing for internal
& external applications
Evaporative retarder for concrete placement
(not for curing)
Spray applied
floor surface treatments Product Selection
Application
Solution
Hand-cast or machine applied, trowelled in during
concrete placement, silica - alumina / cement, integral
hardener
Nitoflor Sicaltop
Interior / exterior, liquid surface hardener, dust-proofer
Nitoflor Lithurin
Clear liquid, hardener, densifier, dust-proofer, matt
finish
Durafloor HD
Concrete surface hardener / densifier /
sealer, sheen finish (used with Durafloor HD)
Clear liquid, hardener, densifier, sheen sealer, sheen
finish
Durafloor HD-S
Floor patch repair mortar, fast set,
(depth 15-75mm)
Fast setting (2-4 hrs), trafficable, cementitious patch
repair mortar - (depth 15-75mm)
Patchroc GP
Fast setting (2-4 hrs), trafficable, cementitious patch
repair mortar - (depth 25-200mm)
Patchroc C
Rapid setting (16-24 hrs), trafficable, cementitious
mortar for large repairs - (depth 15-50mm)
Paveroc
Integral concrete hardener, for heavy traffic
areas
Concrete Surface
Hardeners
Concrete Floor
Repairs
Hand-cast or machine
applied, trowelled in
Concrete surface hardener / dust proofer,
water based
Concrete surface hardener / densifier / dust
proofer, matt finish
Floor patch repair mortar, fast set
(depth 25-200mm)
Large area floor repair mortar, rapid set,
(depth 15-50mm)
General purpose, epoxy binder system, for
priming, topping, joint edge repair
Low-pressure sprayer &
pad applicator
Mixed & trowel applied
Nitomortar 903
floor surface treatments Product Selection
Application
Solution
Carpet / tile, self-smoothing, levelling
mortar (2-50mm thickness)
Cemtop GP
Pump & trowel applied
Self smoothing, cementitious, levelling mortar
Carpet / vinyl / timber, self-smoothing,
levelling mortar (0-50mm)
Concrete
Floor Cover
Underlayment
Mortars
Durafloor Leveltop
Carpet / vinyl / timber, trowel-applied,
underlayment mortar (0-50mm)
Feather edging mortar, for change of level &
smoothing (0-3mm)
Trowel applied
Sub-base build mortar, for other
underlayments listed above (up to 200mm)
Marine vessel, carpet / vinyl, levelling
mortar (0-10mm)
Primed, hand applied /
trowel finished
Cementitious, levelling mortar
(thickness 0-50mm)
Durafloor Leveltop Rapid
Cementitious, feather edging mortar
(thickness 0-3mm)
Durafloor Feathertop
Economical, sub-base, cementitious build mortar for
underlayments - (thickness up to 200mm)
Durafloor Levelbase
Levelling mortar for steel/aluminium hulled marine
vessels - (thickness 0-10mm)
Durafloor M
floor surface treatments Product Selection
Application
Solution
Concrete floor sealer
Pedestrian / vehicle trafficable, floor coating,
fuel resistant
Brush, roller, spray apply
Chemical resistant, floor / wall coating
High performance, epoxy floor / wall
coating, coloured
Floor, & Floor /
Wall Coatings
Fast cure version of Durafloor HP (see
above)
Brush, roller, spray apply
Economical, 90% solids, floor / wall coating,
coloured
Economical, internal, floor coating, for
workshops, storerooms, etc
Slip resistant, external pedestrian traffic,
coloured, floor coating
Vehicle & pedestrian trafficable coating,
hard wearing, slip resistant, flexible,
external floor waterproofing system
Clear top coat, abrasion resistant, gloss
Clear, solvent based acrylic, economical, general
purpose, pedestrian / vehicular traffic - (dft 50µm)
Nitoflor FC100
Chlorinated rubber, internal / external, trafficable, fuel
resistant - (dft 60-160µm)
Nitoflor FC120 HB
Floor / wall coating, waterbased epoxy, internal,
coloured - (dft 100 µm)
Nitoflor FC130
Floor / wall coating, high build, internal, solvent free,
food grade - (dft 400-500 µm)
Durafloor HP
Floor / wall coating, fast cure version of Durafloor HP,
internal, coloured - (dft 400 µm)
Durafloor FC
Floor / wall coating, economical, internal, 90% solids /
10% solvent - (dft 285-400 µm)
Durafloor HS
Fast cure, economical, modified synthetic, rubber
based
Durafloor SR
External, water based urethane acrylic, coloured, UV
stable for ramps, balconies, stairs and pathways etc.
Durafloor P Anti-Skid
Abrasion resistant, fire resistant, trafficable floor
coating system for external and internal car parks
Durafloor TC
Clear, high gloss, abrasion resistant, polyurethane,
internal / external
Durafloor PU
Brush, roller, spray apply
floor surface treatments Product Selection
Application
Solution
High performance, chemical & impact
resistant, coloured epoxy, floor topping
High performance, chemical & impact
resistant, coloured epoxy, floor topping for
cold weather applications
Trowel applied
Food preparation & chemical resistant areas,
epoxy floor topping
Highly chemical resistant, floor & wall,
novolac resin system
Concrete Floor
Toppings
Self smoothing, epoxy resin system, coloured,
chemical, impact resistant - (thickness 2-4mm)
Durafloor SL
Self smoothing, epoxy resin system, coloured,
chemical, impact resistant - (thickness 2-4mm), for
cold weather applications
Durafloor SLX
High build screed, epoxy resin system, to create falls
& level changes (thickness up to 5mm)
Durafloor TF
High chemical resistance, versatile, Novolac resin
binder system, bund areas (thickness up to 5mm)
Durafloor N (Novolac)
Internal pedestrian / vehicle traffic,
cementitious wear & levelling topping
Pump applied
Tough, smooth, wear surface, for industrial
applications - (thickness 6-12mm)
Cemtop XD
External pedestrian / vehicle trafficable,
damp-proofing surface topping
Trowel applied
Cementitious, external trafficable waterproofing
surface topping - (thickness 2-4mm)
Aegis MSP
Heavy duty traffic, interior / exterior
wear topping, for steel, concrete, timber
substrates
Steel trowel or squeegee
applied & hand cast
Heavy duty traffic areas, epoxy slurry mix with hard
wearing grit - (grit thickness 3-4.75mm)
Durafloor V Anti-Skid
Steel trowel and roller /
squeegee applied
High build / polyurethane / concrete topping &
polyurethane coating system
(system thickness 3-9mm)
Durafloor X
Extreme service temperature, highly
chemically resistant, hard-wearing, internal
floor topping & coating system
floor surface treatments Product Selection
Application
Solution
High quality, water based formwork and
mould release agent
Economical, general purpose formwork and
mould release agent
Concrete Release
Agents &
Retarders
Applied by brush, roller or
mould oil sprayer
Mould release agent, for pre-fabricated or
tilt up panel construction
Low cost, non-staining, suitable for all types of
formwork, non-hazardous & non-toxic
Reebol WB
Suitable for steel, wood or paper forms, formulated
blend on a light clear hydrocarbon carrier
Form Release Agent
Significantly reduce surface defects including
blowholes in concrete finish, can be used on most
moulds*
Preco Bondbreaker
Ready to use, non-drip, form release creme
in application to steel hinges or vertical
forms
Hand applied by brush,
mop or glove
For forms where a non-drip and long lasting release agent is
required to prevent concrete penetration into steel hinges &
rust staining, prevents distortion & weather durable
Preco Form Creme
Surface revealing liquid for exposed
aggregate finish on fresh concrete
Applied by brush,
knapsack/stirrup pump
Provides a uniform & controlled depth of retardation,
excellent key for future bonding of concrete or
renders, flexible in depth revealing
Preco RWB
* Preco Bondbreaker not to be used with polystyrene moulds or plastic infills
joint sealant Product Selection
Application
Solution
Excellent primerless adhesion to masonry, timber,
aluminium, metal & ceramics. Paintable with water
based acrylic paints
Emer-Seal MS
Concrete, timber, masonry, bricks, flexible,
polyurethane joint sealant
Slower skinning, ideal for exterior applications & long
joints in warm, humid weather
Emer-Seal PU
High performance, concrete, fibre cement,
masonry, aluminium, timber, flexible,
polyurethane joint sealant
Elastomeric joint sealant, primerless adhesion to
concrete, timber, masonry, bricks, aluminium, metal,
ceramics
Emer-Seal PU25
Medium modulus, elastomeric sealant/adhesive,
conforms to AS 4020
Emer-Seal PU40
Facade applications, low modulus, high joint
movement, colour range, silicone joint sealant
Long life weathering, excellant adhesion to most
building materials, no pourous substrate staining,
colour range
Construction Silicone
Exterior gap caulking & pointing mastic,
general purpose, paintable
General purpose, paintable, caulking and pointing
mastic, between building components
Secomastic
Paintable, quick drying, non-slump, water borne,
acrylic joint sealant
Trade Acrylic
High performance, concrete, stone, timber,
aluminium, modified silicone sealant, paintable
General Construction
Sealants
Vehicle & pedestrian trafficable, abrasion /
vandal resistant, polyurethane joint sealant
Fast drying, flexible acrylic joint sealant for
interior construction applications
Sachet sealant gun applied
Sachet sealant gun / bulk
applied
joint sealant Product Selection
Application
Solution
Glass, ceramic tile, aluminium, flexible,
silicone sealant
Fast cure, excellent adhesion, durable tough elastic
seal to glass, ceramics, aluminium
Hilastic 44
Flexible at temperature extremes, durable, tough, for
domestic or commercial applications
Hilastic 66
Fast cure, recomended for sealing lap joints in
Zincalume, Colorbond, Marviplate sheet metal
Hilastic 88
Fast drying, non-staining, excellent adhesion to most
building materials, paintable, sealer
Gap Filler
High joint movement capability, suitable for wet & dry
surfaces, paintable, excellent adhesion
Lexel
Firm, flexible weather resistant seal, suitable for
permanent water immersion, black
Plastiseal
Sealing butt joints & seams in window
frame assembly
Designed for sealing narrow joints & seams in window
frame assembly
Clear Seam Sealer
Coolroom mastic sealant for coolroom
panels
Economical, non-skinning, mastic sealant
Coolroom Mastic
Up to 4 hours fire rating, waterborne formulation,
permanently flexible & paintable
Flamex One
Fire rated up to 4 hours, accomodates 50% total joint
movement, flexible, paintable
Flamex PU
Adhesive & sealant, paintable, grey, for airconditioning duct work, auluminium window frames,
bus & trailor bodies
Ductseal SB
Adhesive & sealant, paintable, grey, for airconditioning duct work
Ductseal WB
Sealant, paintable, grey, for air-conditioning duct work
Emer-Seal Duct Sealer
Bathroom, kitchen, mould & fungus
resistant, silicone rubber sealant
Gutter, downpipe, sheet metal lap joint,
silicone sealant
General Construction
Sealants
General purpose, interior gap filler,
paintable, water based acrylic
Cartridge gun applied
All purpose, clear, interior & exterior gap
sealant, high clarity
Rubberised bitumen mastic, compatible with
bitumen based membranes, joint sealant
Fire rated, acrylic sealant, for interior low
movement joint applications
Fire Rated Sealants
Sachet sealant gun applied
Fire rated, flexible, polyurethane joint
sealant, for exterior & interior applications
Metal ducting sealant, flexible, solvent
based
Cartridge gun applied
Metal Ducting
Sealants
Metal ducting sealant, water-borne acrylic
emulsion
Metal ducting sealant, water based acrylic
co-polymer
Brush or knife applied
joint sealant Product Selection
Application
Solution
Water retaining structure, high joint
movement, two component, polyurethane
joint sealant, AS4020
Resistant to bacteriological attack, abrasion resistant,
excellent adhesion, suit wide joints
Emer-Seal 200
High chemical & biological resistance applications,
long life weathering, fast cure
Emer-Seal CR
Fast cure, excellent adhesion to clean, dry concrete,
NSW RTA, QLD Main Roads compliant
Roadseal
Fast cure, excellent adhesion to clean, dry concrete &
asphalt, large joint movement
Roadseal SL
Accomodates continuous & pronounced cyclic
movement, high resitance to weathering
Thioflex 600 Gun Grade
Accomodates continuous & pronounced cyclic
movement, high resitance to weathering
Thioflex 600 Pouring Grade
Self smoothing, tough rubbery seal, high joint
movement accomodation
Colpor 200PF
Three component premix,
pour applied
Tough resilient seal to support concrete joint arrises,
chemicals & hydrocarbon fuel resistant
Nitoseal 280
Two part mortar mix &
hand tape applied
Accomodates continuous & pronounced cyclic
movement, suits dry & damp substrates
Emer-Band
Primed, & peel-back
applied
Internal & external pre-cast concrete joint sealing
systems
Conwrap
Prime, & hand applied
For sealing non-moving joints, in pre-cast or new
concrete to existing concrete applications
Conseal CS231
Two component premix,
gun applied
Chemical & biological resistant, durable,
joint sealant, AS4020
Road, bridge, aircraft runway, low modulus,
high joint movement, silicone rubber joint
sealant
Civil Construction
Sealants
Asphalt, highway concrete pavement, very
low modulus, large joint movement, selfsmoothing, silicone joint sealant
Sachet gun applied
Sachet gun or bulk
container dispensed by
hand or pump
Fuel resistant, low modulus, high joint
movement, two component, gun grade,
polysulphide joint sealant
Fuel resistant, horizontal movement joint,
pouring grade, polysulphide sealant
Two component premix, G
gun applied
Road, runway, hard standing, fuel, oil,
hydraulic fluid resistant, self smoothing,
pitch free, joint sealant
Internal industrial floor joints, heavy duty,
high modulus, three component, coloured
epoxy-urethane joint sealant
Wide-joint, bridging system, highly chemical
resistant, flexible, hypalon rubber & epoxy
mortar, AS4020
Self-adhesive, bituminous, joint bridging
tape for box culverts and bridge decks
Pre-cast Concrete
Jointing systems
Pre-cast concrete, joint sealing gasket, low
expansion
joint filler Product Selection
Application
Solution
Low load transfer, joint filler, for brickwork,
blockwork, and pedestrian traffic concrete
expansion & isolation joints
Cut to size from sheet or
rolls
Semi-rigid, joint filler, for forming expansion
joints in concrete, brickwork, blockwork and
water retaining / excluding structures
Medium load rigid, non-expanding joint
filler, for internal & external traffic areas,
roads, concrete slabs and pavements
High load rigid, self-expanding joint filler, for
internal & external traffic areas, roads, bridges,
carparks, water retaining / excluding structures
Joint Filler Boards &
Joint Backing Rods
Cut to size from sheet,
fixed or bonded to
substrate
High load rigid, self-expanding joint filler & sealer,
for internal & external traffic areas, roads, bridges,
carparks, water retaining / excluding structures
Low load, medium density, closed cell,
polyethylene backing rod range
Low density, open cell, polyurethane
backing rod range
Compressible, bitumen impregnated fibre
board filler, for pavements, floors, roads
Polystyrene isolation joint, blockouts, bolt
sleeves, cylinders, etc., filler material
Polyethylene tape used to isolate sealants
from substrates or joint fillers, to prevent
three sided adhesion
Rolls, Rod, cut to length,
friction inserted
Cut to size from sheet,
fixed or bonded to
substrate
Roll width selected, cut to
length, hand applied
Compressible polyethylene, closed cell, nonabsorbent, rot-proof, joint filler
Jointflex
Non absorbent, closed cell, polyethylene joint filler,
non-tainting, rot proof, RTA T1204 compliant
Stiffjoint
Resilient and waterproof, economical, ASTM Spec.
D1752-84 (Type 111)
Hydrocor Type 2
Resilient and waterproof, expands to fill joint, ASTM Spec.
D1752-84 (Type 111), US Fed Spec. HH-F-34F (Type 11,
Class C)
Hydrocor Type 3
Resilient and waterproof, expands to fill joint will not
extrude under pressure, ASTM Spec. D1752-84 (Type
111), Dept. Housing & Const. Spec. RA SS 106
Hydrocor Type 106
Acts as both a bond breaker and joint profile former to
support all elastomeric sealants, between all common
building materials
Expandafoam
Flexible, versatile, backing rod
Emer-Seal Backing Rod
Resilient, will not extrude under pressure. Only
suitable for bitumen based sealants
Cellflex
Economical, lightweight, versatile, compressible filler
Polystyrene
Economical, 66m tape rolls, in 12mm; 15mm; 20mm;
25mm; & 50mm widths
Bond Breaker Tape
concrete jointing Product Selection
Application
Concrete Dowel
Systems
Solution
Dowel plate systems, for concrete slab &
pavement construction joints
6mm & 10mm PVC sleeve & dowel plate systems for
two directional construction joint movement
Diamond Dowels
Dowel cradle systems, for concrete slab &
pavement sawn contraction joints
Prefabricated welded cage to exactly align dowels.
Range to suit slabs 100mm to 300mm thick
Dowel Cradles
Dowel bar plastic sleeve, for lateral movement
round or square dowels, in expansion,
contraction, or construction joints
Provides lateral joint movement of up to +/- 5mm.
Suitable for 20mm round or square dowels (16mm
with optional sleeve)
Dowelform
For construction & expansion joint applications.
Suitable for 16mm & 20mm square dowels
Dowelmaster
Dowel bar metal ‘U’ shaped cover, for
vertical load transfer joints in concrete,
using square dowel bars
Suits 16mm, 20mm, 25mm square dowels for both
parallel & perpendicular movement greater than +/5mm
Metal Dowel Covers
Metal dowel bar sleeve, capable of large
lateral movement
Made from strong galvanised steel, 16, 20, 25, 28, 32
and 40mm square dowels
Flanged Dowel Box
Inserted into wet concrete to induce a contraction
joint crack
Crack-a-Joint
Pre-fixed & cast in
Dowel bar plastic sleeve, for vertical load
transfer joints in concrete, using square
dowel bars
Pre-formed metal, crack inducing strip
concrete jointing Product Selection
Application
Concrete Slab Edge
Treatments
Solution
Floor joint edge protection systems for
critical industrial floors from small, hard
wheeled traffic
Sacrificial mesh formwork, for construction
joint & concrete stop end joints in slabs and
walls
Metal, pre-formed keyjoint formwork
system, for light trafficked, on ground slabs
PVC, reusable keyjoint former, for
establishing key joints in concrete
pavements
Pre-fixed to ground &
Cast in
Pre-fixed to formwork,
stripped & reused
Load bearing, joint movement and rotation
pad system
Concrete Slipjoints
Light-load bearing, pre-greased, galvanised
slipjoint & cavity bridge strip joint system
Armourmate
Galvanised steel sheet with roll formed ribs, to
provide perfect bond & shear key to follow-on pour
Super Rib
Galvanised steel, stay-in-place formwork system,
for 100mm, 125mm, 150mm, 200mm, 250mm thick
concrete
Keyjoint
Galvanised steel, stay-in-place formwork system,
for 100mm, 125mm, 150mm, 200mm, 250mm thick
concrete
Expandajoint
Lightweight, easily removed from concrete, & durable.
80mm size (50mm key) for concrete up to 150mm, &
112mm size for concrete up to 150mm (72mm key)
PVC Keyjoint Former
Polished stainless steel sheet, sliding on a PTFE layer
bonded to a high performance rubber strip
Slipjoint
Graphite grease lubricant slippage, sandwiched
between two layers of galvanised sheet metal
Galvanised Slipjoint
Pre-fixed & Cast in
Metal, sacrificial keyjoint formwork system
for light trafficked, on-ground slabs
Concrete Slab Key
Joints
Long term durable metal armoured joint edges, to
eliminate spalled joint edges for industrial floors
Pre-prepared, positioned
& cast in
concrete jointing Product Selection
Application
Exposed
Reinforcement
Protection Caps
Foundation
Formwork Systems
Solution
High visibility, plastic, coloured yellow for 12mm to
24mm bars, coloured Orange for 24mm to 36mm
bars
Reo-Sok
High visibility, polypropylene, 2mm steel plate
reinforced, yellow for 12mm to 20mm bars, Orange
for 24mm to 36mm bars
Life Guard
Hand placed on site
Environmentally friendly, 400 micron cardboard with
honeycomb cellular core, lightweight, high load
capacity
Eccovoid
Pre-manufactured, cut to
size on site
Flat steel mesh with heat shrunk polythene layer,
versatile, strong, sacrificial sub grade foundation
formwork
Pecaform
Plastic, injury protection caps for exposed,
horizontal reinforcement bars & star pickets
Polypropylene, impalement protection caps
for reinforcement bars & star pickets
Collapsable void formers to seperate
concrete slabs, ground beams & pile caps
from unstable expansive soils
Sub grade, sacrificial foundation & pile cap
formwork system
Hand placed, friction-fit,
over reinforcement
waterstop Product Selection
Application
Solution
PVC Waterstop profiles for below ground
basements, water retaining / water
excluding structures
Centrally and externally placed PVC Waterstops
provides an integral sealing system for movement and
construction joints in concrete cast in-situ
Ground laid & formwork
fixed
Waterstop
Systems
Water swellable, waterstop paste
Hydrophilic waterstop, high expansion
Hydrophilic polyurethane prepolymer, elastic
hydrogel to seal leaks in pipes, embankments
& stabilise grounds
Surestop Waterstops
Thermoplastic, elastomeric, rubber waterstops
for critical chemical, industrial & environmental
applications
Earthshield TPV/TPER
Hand placed
Hydrophilic waterstop range to seal horizontal &
vertical construction joints for poured in-situ concrete
Hydrotite
Cartridge gun applied
Bonds Hydrotite profiles to rough concrete surfaces.
Water swelling up to 2 x approx. For box culverts,
pipes, cast in-situ concrete, etc.
Leakmaster
Hand placed
Butyl bentonite based, hydrophilic waterstop for use
in less critical, in-situ, non-movement joints
Superswell 47B
Application method is
dependant on the type of
project
Reacts with water within 45-50 seconds to form a
white, variable gel water seal
Poly-Grout 100
Chemical resistant waterstop profiles
Water swellable, waterstop profiles for cast
in-situ concrete
Supercast PVC Waterstops
Waterproofing & Architectural Coatings Product Selection
Application
Solution
Roof & podium deck, two layer, bituminous
sheet, membrane system
External Area
Membrane
Systems
‘UV Exposed’
Saturated substrate, roof & podium deck,
two layer, bituminous sheet, membrane
system
Heat sensitive substrate, roof & podium
deck, three layer, bituminous sheet,
membrane system
Roof & podium deck, single layer, TPO,
membrane system
Roof & podium deck, pedestrian traffic,
waterproofing membrane, elastomeric,
water based acrylic, with full colour range
Top layer - Elastomeric, reinforced, mineral finish
Testudo Mineral
Base layer - Elastomeric, reinforced, 3mm thickness
Fidia
Top layer - Elastomeric, reinforced, mineral finish
Testudo Mineral
Base layer - Water vapour diffusing, membrane
Vapordiffusor
Top layer - Elastomeric, reinforced, mineral finish
Testudo Mineral
Mid layer - Elastomeric, reinforced, 3mm thickness
Fidia
Base layer - Polyester fabric backed, membrane
Rollbase
Bonded or edge fixed or
ballast over
Single layer, thermo-plastic olefin (TPO), membrane,
adhesive bonded or mechanically fastened
TPO Membrane
Liquid applied
Highly flexible, water borne acrylic coating + waterproofing
membrane, with outstanding protective properties against Chloride
ion & Carbonation attack, for concrete & masonry structures
Emer-Clad
Torch Applied
Torch Applied
Torch Applied
Waterproofing & Architectural Coatings Product Selection
Application
Solution
External, under tile / paver, fast drying,
flexible, polymer modified cement based
waterproofing membrane
Liquid applied
External, under tile / paver, waterproofing
membrane, polyurethane
External Area
Membrane
Systems
‘UV Protected’
Roof & podium deck, two layer, bituminous
sheet, membrane system
Roof & podium deck, single layer, TPO,
membrane system
Internal, wet area, high build, waterproofing
membrane, water based, fibre reinforced,
modified polyurethane
Internal Wet
Area Membrane
Systems
Internal, wet area, fast drying, flexible,
polymer modified cement based
waterproofing membrane
Tile adhesive grouting, cement based,
rubber modified, flexible
Low VOC <25 g/Lt. Suitable for UV protected under
tile/paver applications
(conforms to AS 4858:2004 Class II membrane)
Emer-Proof 250
High elasticity, flexible, excellant bond, low water
permeability, floor / wall membrane for basements,
balconies, terraces, etc
Emer-Proof 750
Top layer - Elastomeric, reinforced, 4mm thickness
Testudo
Base layer - Elastomeric, reinforced, 3mm thickness
Fidia
Single layer, thermo-plastic olefin (TPO), membrane,
adhesive bonded or mechanically fastened
TPO Membrane
Odour & solvent free, fast drying, one component,
fibre reinforced, waterproofing membrane (conforms
to AS4858:2004 Class 3 membrane)
Emer-Proof 695
Low VOC <25 g/Lt. Suitable for permanently wet
conditions, potable water approved
(conforms to AS 4858:2004 Class II membrane)
Emer-Proof 250
Tile adhesive for bonding ceramic, stone, & most
mosaic tiles, to concrete, render, blockwork,
plasterboard, fibre cement & particle board surfaces
Tilebond Flex
Torch applied
Bonded or edge fixed or
ballast over
Liquid applied
Trowel applied
Waterproofing & Architectural Coatings Product Selection
Application
Architectural
Facade
Waterproofing &
Protective Coating
Systems
Solution
Architectural protective facade coating &
waterproofing membrane, elastomeric,
water based acrylic, with full colour range
Highly flexible, water borne acrylic coating + waterproofing
membrane, with outstanding protective properties against Chloride
ion & Carbonation attack, for concrete & masonry structures
Emer-Clad
Architectural protective facade coating,
water based acrylic, flexible, with full colour
range
Flexible, water borne acrylic facade coating, with
excellent protective properties against chloride ion &
carbonation attack, for concrete & masonry structures
Emer-Impact
Water based, elastomeric, fire retardant coating to AS
1530 Part 3, for concrete, masonry, polyurethane &
styrene foam insulation, pipe lagging
Emer-Clad Firecheck
Water based, high opacity, excellent long term
weathering performance, mould & fungi resistant
Emer-Acrylic Low Sheen
Suitable for interior & exterior use, with excellent
adhesion to concrete, render & most masonry
surfaces
Emer-Patch (Smooth)
Fire retardant protective coating for
concrete & masonry surfaces
Brush, roller, or spray
applied
High quality, low sheen, water based acrylic,
pigmented coating
Smooth, acrylic patching compound, for
substrate preparation prior to painting
Trowel applied & sanded
Waterproofing & Architectural Coatings Product Selection
Application
Solution
Small planter box, waterproofing membrane
system, with protective drainage sheet over
Landscaped area & planter box, TPO
waterproofing membrane system &
protective drainage sheet
Emer-Proof Drain V
Base layer - Flexible membrane, low VOC <45 g/Lt,
suitable for permanently wet conditions, potable water
approved (conforms to AS 4858:2004 Class II membrane)
Emer-Proof 250
Top layer - Dimpled, HDPE drainage sheet, with
geotextile fabric
Emer-Proof Drain V
Base layer - High performance, water based, fast
drying, rubberised waterproofing membrane, with low
VOC levels <2 g/Lt.
Ecoflex
Deep cup, dimpled, water retaining/shedding, HDPE
drainage sheet
Emer-Proof T20 Garden
Top layer - plant root repellent membrane, 4mm
thickness
Defend H
Base layer - elastomeric, reinforced, 3mm thickness
Index Fidia
Deep cup, dimpled, water retaining/shedding, HDPE
drainage sheet
Emer-Proof T20 Garden
Single layer, thermo-plastic olefin (TPO), adhesive
bonded
TPO Membrane
Hand laid & liquid applied
Landscaped
Areas & Planter
Box Membrane
Systems
Landscaped area & large planter box,
waterproofing membrane system, two layer
bituminous sheet, with anti-root additive, &
protective drainage sheet over
Top layer - Dimpled, HDPE drainage sheet, with
geotextile fabric
Hand laid & torch applied
Fully bonded
Waterproofing & Architectural Coatings Product Selection
Application
Solution
Foundation, basement, lift pit, walls,
waterproofing membrane system, self
adhesive bituminous sheet & protective wall
drainage sheet over
Below Ground
Basement
Waterproofing
Foundation, basement, lift pit, floor & walls,
waterproofing membrane system, preapplied floor membrane, self-adhesive wall
sheet membrane, & protective wall drainage
sheet over
Foundation, basement, lift pit, floor & walls,
pre-applied, waterproof tanking membrane,
system
Dimpled, HDPE drainage sheet, with geotextile fabric
Emer-Proof Drain V
Wall membrane, cross laminated HDPE, 1.5mm
thickness
Emer-Proof HDPE
Hand laid
Dimpled, HDPE drainage sheet, with geotextile fabric
Emer-Proof Drain V
Self-adhesive
Wall membrane, cross laminated HDPE, 1.5mm
thickness
Emer-Proof HDPE
Pre-applied
Floor membrane, pre-applied, cast in to concrete
Proofex Engage
Pre-applied
Floor & wall membrane & gas proofing, pre-applied,
cast in to concrete
Proofex Engage
Hand laid & self-adhesive
Waterproofing & Architectural Coatings Product Selection
Application
Solution
Blockwork retaining walls, sheet membrane,
torch-applied & protective wall drainage
sheet over
Blockwork retaining walls, sheet membrane,
self-adhesive & protective wall drainage
sheet over
Top layer - Dimpled, membrane protective, HDPE
drainage sheet, with geotextile fabric
Emer-Proof Star 320
Base layer - Elastomeric, reinforced, 3mm thick,
bitumen waterproofing sheet membrane
Index Fidia
Top layer - Dimpled, membrane protective, HDPE
drainage sheet, with geotextile fabric
Emer-Proof Star 320
Base layer - Wall membrane, cross laminated HDPE,
1.6mm thickness
Emer-Proof HDPE
Top layer - Dimpled, membrane protective, HDPE
drainage sheet, with geotextile fabric
Emer-Proof Star 320
Base layer - Flexible membrane, low VOC <45 g/Lt,
suitable for permanently wet conditions, potable water
approved (conforms to AS 4858:2004 Class II membrane)
Emer-Proof 250
Top layer - Dimpled, membrane protective, HDPE
drainage sheet, with geotextile fabric
Emer-Proof Star 320
Base layer - Water based, rubberised waterproofing
membrane
Emer-Proof Ecoflex
Hand laid / torch-applied
Hand laid / torch-applied
Retaining Wall
Damp Proofing /
Waterproofing
Concrete retaining walls, liquid membrane,
economical, & protective wall drainage
sheet over
Liquid applied & hand laid
Concrete retaining walls, liquid membrane,
economical, & protective wall drainage
sheet over
Waterproofing & Architectural Coatings Product Selection
Application
Solution
Potable water / waste water, cement based,
waterproofing membrane render
Potable water / waste water, cement based,
dynamic crack accommodating (up to
0.5mm), waterproofing membrane render,
Water - Retaining
/ Excluding
Structures
Withstands up to 70m water head, both positive
& negative pressure, for masonry, brick, stone,
blockwork, concrete
Vandex BB75-Z
Vandex BB75E-Z
Potable water / waste water, cement based,
dynamic crack accommodating (up to
0.3mm), waterproofing membrane render
Brush, trowel or spray
applied
Withstands up to 15m water head, both positive
& negative pressure, for masonry, brick, stone,
blockwork, concrete Conforms to AS/NZS 4020:1999
Vandex Cemelast
Potable water, in-depth concrete capillary
penetrating, crystal growth sealing, cement
based waterproofing
Brush, spray applied
Withstands up to 70m water head, both positive &
negative pressure, for reinforced concrete structures
only. Conforms to AS4020 maximum pass achieved
Vandex Concrete Grey
Hand applied
Stops water flow, 30 second set, permanent repair
plug
Vandex Plug
Solvent free, epoxy resin coating system for potable
water retaining structures on concrete & steel
Nitocote EP405
Highly chemical resistant, solvent free, epoxy coating
system for concrete & steel applications
Nitocote EP410
Water leak plugging, fast setting, cement
based mortar
Chemical Resistant
Protective
Coatings
Brush, trowel or spray
applied
Potable water certified, protective coating
system for concrete & steel
Brush, roller, spray applied
Chemical resistant, protective coating for
concrete / steel
decorative surfaces Product Selection - new concrete
Application
Full Depth
Concrete Colouring
Solution
High quality, pigment colouring to full depth
of concrete. Extensive colour ranges
Pigment colouring mixed
into concrete at batching
plant
Colour Thru Pigment Colour Range
Colour Thru or Colourmix
Colourmix Colour Range
Stencil Patterns
Stencil Pattern
Concrete
Coloured pigment spray applied or
trowelled over Stencil pattern designs on
freshly placed concrete
Spray applied & trowelled
Colour Hardener Range
Fauxtex
Stencilcrete
Sealers
decorative surfaces Product Selection - new concrete
Application
Solution
Stamped Mat Imprint Designs
Stamped
Impression
Concrete
Stamped Impression designs add colour,
pattern, texture and hardens concrete
surface
Mat impressions stamped
into freshly placed
concrete
Release Agent / Colour Hardener Range
Sealers
Fauxtex Stamped
Stampcrete
Dry Shake Pigment
Coloured Concrete
Colour Hardener Range
Coloured pigments dry shake applied &
trowelled onto freshly placed concrete
Fauxtex or CP Colour Hardener
Dry shake applied &
trowelled
Sealers
Fauxtex Bonding Agent
Wet Spray
Pigment Concrete
Colouring
Fauxtex Spray-On Colour Hardener Base
Colour pigments wet spray applied onto
freshly placed concrete
Fauxtex or CP Colour Range
Spray applied
Fauxtex Dispersants
Sealers
decorative surfaces Product Selection - existing concrete
Application
Solution
Stencil Pattern Design Range
Water Based Primer / Cement Activator
Resurfacing Systems used to create stencil,
stamped, and coloured decorative finishes
on existing concrete surfaces. Fauxstone
replicates exposed aggregate finish
Existing concrete cleaned,
primed, colour pigment
spray applied with or
without stencil patterns
and sealed
Covertex
Covacrete NXTGEN
Resurfacing Compounds
Duratex
Fauxstone
Stains
Intatone Stains
Concrete
Resurfacing
Systems
Sealers
Solid concrete stain
Environmentaly friendly, water based stains,
to rejuvenate and enhance existing coloured
concrete surfaces
Broom applied
Colour enhancer
Concrete sealer
NewLook
decorative surfaces Product Selection - existing concrete
Application
Solution
Colour Sealer Base
Colour Sealer Tint
Coloured Acrylic Sealers
Spray or roller applied
Lustreseal Acrylic Sealer
Lustreseal Colour Tint
Concrete Sealers
Lustreseal Acrylic Sealer
Lustreseal Superbond
Lustreseal Extended Wear Plus
Clear Acrylic Sealers
Spray or roller applied
Lustreseal Matt Finish Sealer
Lustreseal Waterbased Sealer
Lustreseal Polyurethane M20
Mastershield UA20
Urethane Acrylic
Concrete Surface Treatment
Spray or roller applied
Water & Oil Repellant
decorative surfaces Product Selection - existing concrete
Application
Solution
Water based, coloured epoxy system, fast
drying, matt finish, 50% solids
Base + Hardener
Mastershield M50 Aqueous
Epoxy System
Tint Colour Range
Mastershield M50 Aqueous
Colour Tint
Base + Hardener
Mastershield M90 Epoxy
System
Tint Colour Range
Lustreseal Sealer Tints
Sealer with anti-graffiti properties
Mastershield UA20 Urethane
Acrylic
UV stable sealer
Lustreseal Polyurethane M20
Roller applied
Clear or coloured, 100% epoxy floor system
Internal Epoxy
Decorative Floor
Treatments
Clear, high gloss, concrete sealer
Trowel or roller applied
High quality, 100% Urethane top coat
sealer, long wearing abrasion resistant for
Mastershield M50 & M90 epoxy systems
Mastershield polymer Flake
Epoxy floor additives for special appearance
and slip resistance
Spread and Sprinkle
System Additives
Mastershield Stone Grip
decorative surfaces Product Selection - existing concrete
Application
Solution
Self levelling, cementitious compound
(2-4mm)
Cobblestone Self Levelling
Sparayable & Trowellable
Concrete Substrate
Repair Material
Economical, concrete patch repair mortar
(0 - 10mm)
Duratex PR10
Trowel applied
High strength, patch repair mortar
(3 - 40mm)
Floor Cleaning,
Protection System
Duratex PR40
General Purpose Cleaner
Huntaway General Purpose
Cleaner
Epoxy Floor Cleaner
Huntaway Neutral Cleaner
Protective Coating
Huntaway Protectorcote 1
Huntaway Hand & Body
Cleaner
Product Selection guides
P A R C H E M
C O N S T R U C T I O N
S U P P L I E S
Superior Service Throughout Australia
With offices and warehouses around Australia, Parchem is able to offer a superior level of service to customers in all regions of the country.
Technical Support
Whenever you need it. Parchem gives you practical advice on product selection, application guidance and provides the technical assistance you require to design and construct a project. Call toll free 1800 812 864.
Single Source Supplier
Parchem’s range of products gives you the security of dealing with a single supplier for a complete range of compatible solutions to meet the total needs of your project.
ISO 9001 Quality Assurance
With its manufacturing facilities fully accredited to ISO 9001, Parchem offers its customers the assurance of independently audited quality systems.
Australian Company
Parchem Construction Supplies Pty Ltd is part of the Construction and Mining division of Alesco Corporation Limited, listed on the Australian Stock Exchange. As an Australian company, Parchem’s market focus is on Australia. Products
are specifically formulated to offer optimum performance under Australian usage conditions, thereby, best meeting the needs of Australian customers.
Parchem is dedicated to customer service so please contact us for more information about our product range.
P: 1800 801 108
www.parchem.com.au
Head Office: 7 Lucca Road Wyong NSW 2259
ABN 80 069 961 968