CUPMOUNT SERIES:
How to order Cupmounts
The part numbering system of the Barry Cupmount
series includes coded designations of the metal
parts, elastomer, size, load rating and attachment
core characteristics. Please note, aluminum parts
are available for 1000 & 2000 series only.
The letter prefix preceding a part number designates the metal and elastomer. The first number
of the four digit part number designates the size,
or series of the Cupmount.
The suffix designates a through core or tapped
core, and core diameter. The absence of the letter
“T” indicates a through core. The number indicates the core diameter bolt size. Refer to dimensional drawings for standard core diameters.
To avoid overstressing attachment bolts, core
diameter cannot be interchanged from series to
series.
PREFIX
METAL
ELASTOMER
NC
Cold-rolled steel
Hi-damp Silicone
UC
(zinc plated finish)
Universal
C
Natural Rubber
NL
Aluminum
Hi-damp Silicone
Typical Barry Controls Cupmount Part Number:
N C 1 015 - T 4
Elastomer:
(Hi-Damp)
Metal Parts:
Size:
(Steel)
(Series 1000)
Load Rating:
(See chart below)
Tapped Core:
(Absence of letter “T” indicates through core)
Core Diameter in Sixteenths (4/16”)
CUPMOUNT SERIES LOAD RATINGS
136
Part #
Maximum Load Range - lbs.
(Vibration Applications)
Load Range - lbs.
(Shock Applications)
1010
1015
1035
1050
20
30
70
100
8-14
14-24
24-38
38-60
2020
2040
2060
2090
50
100
150
250
15-30
30-50
50-80
80-105
4100
4135
4200
4300
250
400
650
900
65-100
100-155
155-200
200-285
3125
3175
3300
3500
600
800
1400
1800
80-120
120-185
185-285
285-530
P R O D U C T S A N D A P P L I C AT I O N S A R E E X A M P L E S O N LY. C O N TA C T U S W I T H Y O U R N E E D S . 1 - 8 0 0 - B A R RY- M A