Quality, Reliability and Flexibility
in service of our customers
AXXIA GmbH
Alte Ziegelei 4
D - 51588 Nümbrecht
Germany
Tel
Fax
Email
Internet
+49 (0)2293 90947 0
+49 (0)2293 90947 20
info@axxia.de
www.axxia.de
1/25
Business
Outstanding- and special cranes
Automatic cranes, Stack cranes, storage and retrieval vehicles, Manipulators
Smelter cranes, Foundry cranes
Bridge cranes, Overhead crane, Gantry- and Half-gantry cranes, Slewing cranes
Crane reduction and crane extension
According to situational condition on site or in our plant
Trolleys, cable winches and ultimate loads
Trolleys, drive-over trolleys
Cable winches, chain drives, mandrel hoists
Load fences, lifting telescope, pendulum damping
Hook traverses, Load gripper
Coil- and slab handling, Special traverses
Constructional steelwork and welded constructions
Crane runways, Column- and floor running rail
Engine frames, Special casing, Form cases
Spezial constructions
Repair- and deposition welding
Drive technology and Automation
Positively Drive systems
Bogies, Transport unit, movable steelworks
Electronic drive technology
PLC- and Field bus technology
Hard- and Software projecting, Documentation
Control Construction, Installation, Start up’s
2/25
Contact person
Dipl.-Ing. Gerd Rambow
Management
Tel.: +49 (0)2293 90947-11
gerd.rambow@axxia.de
Rolf Herrmann
Appraiser for cranes/ Sales Manager
Tel.: +49 (0)2293 90947-15
Rolf.herrmann@axxia.de
Ingo Klamke
Production planning
Tel.: +49 (0)2293 90947-13
Ingo.klamke@axxia.de
Dipl.-Ing. Norbert Steudtner
Construction Crane-/Steelworks
Tel.: +49 (0)2293 90947-14
norbert.steudtner@axxia.de
Burkhard Mehlitz
Production manager
Tel.: +49 (0)2293 90947-19
Burkhard.mehlitz@axxia.de
Tanja Küsters
Office
Tel.: +49 (0)2293 90947-12
tanja.kuesters@axxia.de
Dipl.-Kffr. Swea Rambow
Accounting / Back office
Tel.: +49 (0)2293 90947-0
info@axxia.de
3/25
AXXIA – your trouble-shooter for crane technology, steelwork and
device construction
It was our aim to put innovative constructions in the range of movable steelworks, not only to
develop but also to put into practice consequent and in high quality. In this case arose the
company BUKON Kran- und Anlagentechnik out of an engineering office as a powerful
manufacturer of selective steelwork and device construction in the year 1998.
In the following years the company was able to distinguish itself successfully on the national
and international market with several projects in special crane construction, in transport- and
device technology, in gate devices and many other projects.
In course of development of the company we relocated in the new build headquarter in
Nümbrecht – Elsenroth in 2002. This brought considerable advantages for the production and
transport of oversize components. In the year 2004 we adjusted our range of products by the
sector automation, to develop and realize most modern drive- and control technology as a
complete solution from a single source. In spring of 2006 BUKON had to close because of
several commercial influences. We used the exist location, the expertise and the experience
of the staff, the technical resources and the good reputation of the products to start-up the
AXXIA GmbH
on a new and workable fundament.
Customer oriented flexibility and highest quality in all areas are the fundament of our work.
Where the technical solutions are not to see on the first look, but rather they are the result of
varied experience as well as qualified and flexible construction- and manufacturing
performances, AXXIA is a competent and efficient partner for its customers.
4/25
Production
Production area approx.
1.000 qm
Crane capacity
2 x 10 t
Machine park
Universal-milling machine
Centre lathe
Boring mill
Radial drilling machine
Saws
MAG/ MIG/ WIG – Welding machines
Electric – Welding machines
Neighbouring suppliers for
mechanical machining of big parts too
Steel- and casing construction
Precision turn- and mill parts
Possibilities of production
Single part weight up to approx. 25 t
Single part length up to approx. 30 m
Welding qualifications:
Manufacturer qualification according to DIN 18800-7/
Class E with upgrading according to DIN 15018 and
DIN 4132
Welding processes MAG, MIG, WIG
5/25
6/25
Control technology and Automation
ECAD-Project planning (on WSCAD- and EPLAN-Systems)
Switchboard fabrication
PLC- Programming S5 and S7
Field bus systems and Industrial Ethernet / Profinet
Facility visualisation
Measurement and control technology
Documentation according to CE - guidelines
Energy feeding systems / wireless control technology
Electrical installations and plant removals
Plant- and Machine start - ups
Service and repair of electrical devices
7/25
Competence needs experience
ABUS Krane
Gummersbach
STEULER Anlagenbau
Höhr-Grenzhausen
Spantechnik
Hamm - Sieg
BOSCH REXROTH
Ratingen
BUNDESANSTALT für STRASSENWESEN
Bergisch-Gladbach
DEMAG CRANES
Wetter / Ruhr
DONGES Stahlbau
Darmstadt
HAFÖ Hagener Fördertechnik
Hagen
KRANBAU KÖTHEN
Köthen
KW Kranwerke Mannheim
Mannheim
R. STAHL Fördertechnik
Düsseldorf
SHB Saalfelder Hebezeugbau
Saalfeld
SMS DEMAG AG
Düsseldorf
WMV Apparatebau
Windeck
Kampf – Schneid- und Wickeltechnik
Wiehl- Mühlen
Induga, Industrieöfen – Gießereianlagen
Köln (Cologne)
JBE – Engineering GmbH
Ruppichteroth
Schmidt + Clemens GmbH & Co.KG
Lindlar
Lintorfer Eisengießerei
Lintorf
8/25
…also international
CTI Systems
Lentzweiler / LUX
MVA Alkmaar
Alkmaar / NL
OUTOKUMPU Stainless Oy
Tornio / FIN
RED BULL HANGAR 7
Airport W. A. Mozart Salzburg / A
SCHNEIDER KFT
Töltéstava / HU
SEBIR S.A.
Barcelona / E
THE FLYING BULLS
Airport W. A. Mozart Salzburg / A
TMK Röhrenwerke
Taganrog / RUS
TMK Röhrenwerke
Seversky / RUS
9/25
Main suppliers of the AXXIA GmbH company
- Bieber + Marburg GmbH & Co.KG
- Buchner GmbH & Co.KG
- Gebr. Rottländer GmbH & Co.KG
- Bresi Brennschneidbetrieb GmbH
- Hepner Metallbau
- SEW – Eurodrive
Drive technology
- ABUS Kransysteme GmbH
Drive technology
- SWF Krantechnik GmbH
Drive technology
- Spantechnik
10/25
Power spectrum
To receive an impression of our great range of possibilities we introduce some of our projects
on the next sites.
11/25
Two fully automated Gantry cranes
Operating in a Finnish stainless rolling mill
Tonnage 36t
Span 16m / 17m
Fully automated operation on process control system
Temperature of goods in transit 900°C
12/25
Two fully automated High performance manipulator
Operating in two Russian continuous casting plant
Total weight 48t
Span 14,5m / payload 12,5t
Fully automated operation on process control system
Ambient temperature down to - 40°C
Temperature of goods in transit 700°C
Maximum clock speed: 51 Drive- and Lifting movements in 98s
Electric driving power approx. 470kW
13/25
Drive technology and movable steel construction for
Arena AUF SCHALKE (VELTINS-Arena)
Drive technology and movable steel construction for displaceable South bank
Weight of the displaceable part of stand approx. 700t
Free span of the South bank while moving approx. 80m
Four positional regulated heavy lift bogies in synchronous working
Eight electro hydraulic slewing pillars save the bank during Public traffic
Positioning accuracy +/-5mm
14/25
Fully automated bundle transport device with floor handling
Part of a foil double device
Tonnage 5t
Positively gear rack central drive
Positioning accuracy +/-2mm
15/25
Fold gate device Hangar 8
of the FLYING BULLS
at the Airport „W. A. Mozart“ in Salzburg / A
Gate width 40m, Gate height 7m+3m
Gate total weight approx. 25t
16/25
End carriage and Lifting tower
Components of a Tube handling-crane
Dead weight of Crane 120t
Tonnage 27t
The device is able to move, lift and turn tubes which are lying on the floor.
17/25
Drive devices and Control systems for Lifting gates
Trade fair Düsseldorf
Gate width up to 11m, Gate heights up to 7m
Integrated RWA-Function with electro magnetic emergency tripping
The Gates are easy to lift by hand during a electricity failure
18/25
Two Gripper – Bridge cranes
Used in a Dutch refuse incineration plant
Span 28m
Tonnage 20t
Execution for highest requirements of corrosion resistance
19/25
Two fully automated Manipulators
Used in a Spanish Wire pickling device
Tonnage 5t
Processual controlled use
Manipulator works in strong acidic Atmosphere
20/25
Storage of rolled goods for foil production
Welding constructions mechanic arranged
Inclusive drive technology and Sensor technology completely mounted
21/25
Frame work – Stack crane
Used to Handle of big Polystyrene pads
Span 32m
Integrated Sensor technology for excessive temperature of Polystyrene pads contingent
on chemical error response
22/25
Special construction for Serial crane manufacturer
For example:
Double girder-Bridge crane
Span 28m
Special winch Tonnage 40t
Hook bottle with electricity supply
23/25
Special crossbeam and Load handling device
Girder turn over device 10t
Load crossbeam with automatic weight
compensation
Heavy hook crossbeam
24/25
Details of Company and edition notice
Commercial register
HRB 9400 am AG Siegburg
Address
Alte Ziegelei 4
D-51588 Nümbrecht
Share holder
Dipl. – Ing. Gerd Rambow
Executive board
Dipl. – Ing. Gerd Rambow
Employees
16
Business objective
The production of and trade with subjects of Crane- and
Installation engineering, complete devices , Components
and equipments
Herausgeber:
AXXIA GmbH
Alte Ziegelei 4
D - 51588 Nümbrecht
Tel
Fax
Email
Internet
+49-(0)2293-90947-0
+49-(0)2293-90947-20
info@axxia.de
www.axxia.de
25/25