PRODUCT NEWS
Contact Insert
Power Supply
Chemical Seals
Harting’s
Han-Quick
Lock
termination
technology
is now
also being
deployed on
the Han Q
8/0 contact insert, in addition to the crimp
termination technology. The patented HanQuick Lock technology allows time-saving and
simple assembly without special tools.
A standard screwdriver is sufficient. This
makes it suitable for pre-assembly in the field.
Han Q 8/0 Quick Lock can be used in power,
signal and control applications.
The SPH500 Super
Slim series from
MGV is available
with 72VDC output
which can be
adjusted between
54 – 80VDC.The
compact power
supply calls for a
mounting width
of 62mm and is designed for 90 – 264VAC
mains supplies meeting varied demands. To
meet high peak current requirements, a power
boost supplies 150% of the rated current
for 500ms. The SPH500-7207 is protected
against feedback of up to 100VDC without
activating the shutdown mode.
The process
chemical seals
D900 series
from Baumer are
suitable for high
temperature
applications
up to 400°C.
They are
developed especially for the chemical and
petrochemical industry in order to protect
pressure transmitters against aggressive
media. The seals are available with various
types of ISO- and ANSI-compliant flanges.
The housing is made of forged stainless steel
and the diaphragm is made of stainless steel,
Hastelloy, Uranus or Tantalum.
with termination technology
29737 at www.ien.eu
72V, 62mm-wide DIN rail
28845 at www.ien.eu
for high temperatures
27847 at www.ien.eu
LP-114-A.ai 1 7/17/2009 7:13:27 AM
Input/Output Cards
Industrial PC
These two-channel
input/output cards
from Turck are
Hart-compatible
and thus allow
users to establish
a digital fieldbus
communication
based on preexisting 4…20mA
connections. With these modules, users can
easily link their analogue field devices to the
PLC and integrate them into a consistent asset
management based on the FDT/DTM technology.
The modules allow the interference-free
transmission of additional data from the field
level via modulated digital signals.
The Simatic
IPC547C
rack PC from
Siemens
is twice as
powerful as its
predecessor,
with which it
is compatible
in terms of type of construction, interfaces
and software. It is designed for continuous
24-hour operation in industry at ambient
temperatures of up to 40°C and works without
any loss of performance. The small front-toback size of its space-saving housing allows
it to be mounted in 19-inch control cabinets
with a minimum depth of only 500mm.
Hart-compatible
C
M
Y
27872 at www.ien.eu
CM
in 19-inch format
27886 at www.ien.eu
MY
CY
K
26287 at www.ien.eu
32
Load Pin
Industrial Grade Module
Tecsis' Type F5308
load pins are
typically integrated
directly into existing
machines, replacing
for example an
existing bolt in
fork bearings.
Typical applications
include cranes
and construction machinery. According to
the requirements of these applications,
the load pins fulfil protection class IP67.
Sensitive parts like connectors and electronics
are protected against mechanical damage
enabling usage in very rough environments.
An ATEX version is also available.
The complete
design of
this compact
(95x95mm)
COM Express
compatible
module from
Congatec
is geared
around low power consumption and the
industrial temperature range. All components
used for this high density design are specified
for an ambient temperature range of -40 to
85°C. Typical power requirements for this
module are less than 5W. When combined
with ACPI 3.0 battery management, ultra
mobile industrial applications are possible.
for use in rough environments
CMY
IEN EUROPE
27887 at www.ien.eu
COM Express-compatible
27882 at www.ien.eu
N° 10 - October 2009