V-508F - Functional Products Inc.

advertisement
Technical Data Sheet
FUNCTIONAL V-508F
THICKENER for FATTY OIL BASED LUBRICANTS:
LuSC Listed, VGP Compliant and Food Grade
APPLICATION:
Triglyceride oils based on vegetable or tallow oils are sometimes to be preferred over petroleum base oils as base
stocks for blending hydraulic fluids and lubricants intended for use in environmentally sensitive applications. A
drawback, however, is that they are all of a similar light viscosity, only about 30-35 cSt at 40°C. FUNCTIONAL V508F is a liquid concentrated polymer based thickener for vegetable-based or animal-based fatty oils. ISO grades
up to ISO 1000 can easily be prepared.
COMPOSITION:
The active additive in FUNCTIONAL V-508F is a polymer selected for its shear stability and effectiveness in
thickening. This polymer is itself not biodegradable, but permits the viscosity adjustment of lubricants from
biodegradable base oil systems. The diluent in FUNCTIONAL V-508F is a biodegradable low viscosity methyl ester.
FUNCTIONAL V-508F is inherently biodegradable under all widely used standards.
Typical Properties
Specific Gravity
Lbs per Gallon
Flash Point
Kinematic Viscosity
Color, D1500
Shear Stability Index (PSSI), D6278
0.91
7.58
168°C (335°F)
6500 – 7500 cSt at 100°C
0.5
29
TREATMENT LEVEL:
Unlike some competitive polymethacrylate (PMA) thickeners, V-508F has better shear stability while maintaining
comparable VI. A 1% solution in canola oil has the following properties compared to a competitive PMA.
Viscosity at
40°C
Viscosity at
100°C
VI
Product D6278 Shear
Stability Index
1% V-508F
41.5
9.04
207
29
1% Competitor
109
41.6
9.25
214
48
____________________________________________________________________________________________________________________________
This Technical Data Sheet and the Safety Data Sheet contain information believed to be accurate and reliable. No warranty is made, however, to information beyond the
control of FUNCTIONAL PRODUCTS INC. The engineering and management personnel of the user are responsible for determining the suitability of this or any product for
any specific application, and this information is offered to them for that purpose.
Issued: 1/4/2016
Functional Products, Inc. 8282 Bavaria Rd. Macedonia, Ohio 44056
Ph: 330.963.3060 Fax: 330.963.3322
Technical Data Sheet
Consult the chart below to determine the required treat level to achieve a particular ISO grade.
ISO grade vs. % wt treat of V-508F in canola oil
35
30
30
26
% wt of V-508F
25
22
20
18
16
15
15
12
10
9
5
5
2
0
0
0
200
400
600
800
1000
1200
ISO Grade
As with any vegetable oil or synthetic based ester product seal compatibility should be tested by the user of this
product.
HANDLING:
FUNCTIONAL V-508F is a viscous liquid at room temperature. It should be warmed to about 50°C (120°F) to
facilitate pumping and handling. The base oil should be heated to 150°F to 180°F during blending to allow for
good mixing. Mixing time will vary with equipment but is typically at least one hour. Extended storage of this or
any other vegetable oil derived product at elevated temperatures is not recommended. Safe handling
precautions are the same as those to be taken with synthetic esters and vegetable oils; see the current Safety
Data Sheet.
Nonfood Compounds
Program Listed
Category Codes: HX-1 and HX-2
____________________________________________________________________________________________________________________________
This Technical Data Sheet and the Safety Data Sheet contain information believed to be accurate and reliable. No warranty is made, however, to information beyond the
control of FUNCTIONAL PRODUCTS INC. The engineering and management personnel of the user are responsible for determining the suitability of this or any product for
any specific application, and this information is offered to them for that purpose.
Issued: 1/4/2016
Functional Products, Inc. 8282 Bavaria Rd. Macedonia, Ohio 44056
Ph: 330.963.3060 Fax: 330.963.3322
Technical Data Sheet
Registration No. 146677
____________________________________________________________________________________________________________________________
This Technical Data Sheet and the Safety Data Sheet contain information believed to be accurate and reliable. No warranty is made, however, to information beyond the
control of FUNCTIONAL PRODUCTS INC. The engineering and management personnel of the user are responsible for determining the suitability of this or any product for
any specific application, and this information is offered to them for that purpose.
Issued: 1/4/2016
Functional Products, Inc. 8282 Bavaria Rd. Macedonia, Ohio 44056
Ph: 330.963.3060 Fax: 330.963.3322
Download