HOUSING: 802-I.C.
LAMP MODULE: H-WALL WASH
526 Portal Street
TUNGSTEN
HALOGEN
Cotati, CA 94931
USA
Project Name
P 707.794.0888
Date
F 707.795.4379
Type
www.8lighting.com
Prepared By
All No. 8 Lighting fixtures and components are UL/CSA listed.
No. 8 Lighting trims and lamp modules are protected by one or
more U.S. Patents. No. 8 Lighting reserves the right to change
details of design, materials, and finish.
Comments
Catalog #
802 / H – –
–
/
© 2014 No. 8 Lighting
Doc # 91116-06
–
PRODUCT FEATURES
Housing
• IC-Rated for direct contact with thermal insulation. Airtight – meets Washington State Airtight Standard
WAC 51-11-05-02 and tested in accordance with ASTM E283 to reduce energy loss and sound transmission. CCEA plenum rated and approved for City of Chicago environmental air spaces.
• Accepts all Number Eight Lighting Lamp Modules and Trim Assemblies.
• All aluminum construction for maximum heat dissipation and corrosion prevention.
• Features cross-hair graphics for precise alignment during rough-in installation.
• Extra large capacity junction box with (3) 1/2” knock-outs, (2) 3/4” knock-outs, and (1) 3/8” knockout.
Junction box is UL listed for through wire branch circuiting and is accessible from below after installation.
• Extra rigid bar hangers with four lock down points and integrated self tapping fasteners which accommodate wood or metal joists with on center spacing of 12”-24”. Bar hangers can be mounted to either
sides or ends of housing depending on installation requirements.
8 - 1/2”
4-3/4”
16”
Lamp Module
• Minimal 1.75” square or round aperture.
• Optimized for use with low voltage MR-16, 40 degree flood lamps (50, 37, 35, or 20W)*
• Zinc aluminum alloy construction for maximum heat dissipation and corrosion prevention.
• Ideal for wall washing applications requiring even wash of light on walls.
• Easily removed for servicing or to be interchanged with other Number Eight Lighting lamp modules.
*37 watt maximum when used with 802 IC housing.
9-1/2”
802 - I.C. HOUSING
Transformer/Socket Assembly
• QT - Integral Q-TranTM toroidal transformer with choke (rated max. 19db). Features dual-tap primary
inputs for 100% light output when used with a switched or dimmed circuit. Rated output of 12 volts.
• ET - Integral electronic transformer*. Rated output of 11.7 volts.
• RT - Remote transformer (supplied by others).
• High quality porcelain socket (GX5.3 base) with 14” 18 AWG/ 250°C PTFE leads. Thermally protected
to prevent overheating from mis-lamping or installing insulation too close.
• Transformer removable and accessible from below after installation.
*37 watt maximum when used with 802 IC housing.
H - TUNGSTEN HALOGEN WALL WASH
Use for uniformly washing walls. Features
minimal 1.75” square or round aperture.
Warranty All No. 8 Lighting products are
warrantied for five years.
PRODUCT SPECIFIER/PRODUCT ORDER NUMBER
802
/
HOUSING
/
H-
LAMP MODULE
+
TRIM ASSEMBLY TYPE
LOW VOLTAGE, MR-16
WALL WASH
(12 volt/50 watt maximum*)
Lamp supplied by others.
802
*37 watt maximum when used
with 802 IC housing.
New Construction –
AIRTIGHT-I.C.
9 1/2”W x 16”L x 81/2”H
Accepts All No.8 Lighting Lamp Modules.
Rated for direct contact
with insulation.
–
–
TRANSFORMER
QT
Q-TRANTM
Integral toroidal
magnetic transformer
w/ choke
(19 db sound rating)
ET*
Integral electronic
transformer
H-S
4” SQUARE trim plate fits into
Seamless SeriesTM or Inset SeriesTM
trim assemblies.
H-R
4” ROUND trim plate fits into
Seamless SeriesTM trim assemblies.
*37 watt maximum
when used with 802 IC
housing.
RT**
+
/–
VOLTAGE
TRIM
FINISH
+
ADDITIONAL
OPTIONS
12V (RT only)*
WH
120V (Standard)
PN
T-BAR MOUNTING
CLIPS
SN
(Set of four) included
with housing.
WHITE
230V (QT only)*
POLISHED NICKEL*
240V (ET only)*
SATIN NICKEL*
277V (QT only)*
*Non-standard voltage.
Additional lead time may
be required.
PB
POLISHED BRASS*
SB
SATIN BRASS*
TBC
PMB
PANEL MOUNTING
BRACKETS
(Set of two) included with
housing.
OB
OIL-RUBBED BRONZE*
REMOTE
TRANSFORMER
BK
**12 volt transformer for
low voltage MR-16 type
lamp required (supplied
by others).
*Specialty finish.
Additional lead time
required.
BLACK*
91116-06 PAGE 1
LAMP MODULE H – TUNGSTEN HALOGEN WALL WASH
Lamp Module H incorporates
the magnetic trim plate into
the lamp module assembly,
and is available with either a
SQUARE trim plate (Seamless
SeriesTM and Inset SeriesTM), or
ROUND trim plate (Seamless
SeriesTM only).
Lamp Module H patent pending lens and lamp holder
system designed to evenly
wash walls. Trim kit assemblies are available for plaster,
wood, stone or acoustic tile
ceilings.
Lamp Module H is available in
many designer finishes: White,
Polished Nickel**, Satin
Nickel**, Polished Brass**,
Satin Brass**, Oil-Rubbed
Bronze**, and Black**.
WH - WHITE (SQUARE)
WH - WHITE (ROUND)
**Lot variations in specialty
finishes may occur. Ordering
ALL trim kits and matching
H Modules at the same time
is recommended to minimize
variations in finishes.
PNSNPB SB OBBK
POLISHED NICKEL
SATIN NICKEL
POLISHED BRASS
SATIN BRASS
OIL-RUBBED BRONZE BLACK
LAMP MODULE H – TRIM ASSEMBLY CROSS SECTION DETAIL
Note: Cross sections are for illustration purposes only. Refer to housing installation instructions for complete installation details.
91116-06 PAGE 2