Highlighter® HL-DL Direct View Architectural Delineation LED System
Date:
Product Specification Sheet
Type:
Company:
Project:
The Highlighter® HL-DL is a modular LED lighting system designed for
architectural delineation. HL-DL is available in both Extra Low Voltage
(ELV) models; used for short/medium runs up to 30m/90ft and INFINITY™
(INF) models for long runs; up to 200m/672ft and data center lighting
applications. HL-DL-INF is a registered product with the Emerge Alliance.
The Highlighter® module is a fully sealed, IP66, 300mm (1ft) linear
luminaire with 18 LEDs consuming a maximum of 5W. Each module
produces up to 450lm. Round or Flat diffuser tubes are illuminated with
even, saturated light up to 4000 cd/m2, delivering up to 230 lumens.
Clear cover lenses allow the full brightness of the modules to shine
through.
Mechanical Drawings
HL-DL-ELV models accept universal input 12-60V DC supply. HL-DL-INF
models use GVA Lighting's proprietary power and control technology,
INFINITY™, based on 380V DC, which allows them be installed in
exceptionally long runs. Up to 672 modules can be connected to one
feed for a single run of up to 200m.
L
86.50mm
3.41in
59.40mm
2.34in
40.50mm
1.59in
38mm
1.50in
50mm
1.97in
Round Diffuser
The Highlighter® HL-DL system consists of LED modules, an aluminum
mounting profile and a round or flat diffuser tube or clear cover lens.
Each module is connected end-to-end and snapped into the aluminum
mounting profile. The impact resistant, UV stable acrylic diffuser tubes or
clear cover lens snaps on over the modules.
44.45mm
1.75in
38mm
1.50in
49mm
1.93in
46mm
1.81in
Flat Diffuser
HL-DL is powered and controlled by GVA Power-Data Equipment. PowerData Equipment integrates line voltage and various common control
protocols and delivers a combined Power-Data feed to the luminaires
through a single cable and plug-and-play connectors. For data centers,
modules can be connected directly to a 380V DC power grid.
Clear Cover
Features
Typical HL-DL Diagram
 System Includes: HL Modules + Aluminum Mounting Profile +
Diffuser
Mounting Profile
Highlighter Module
Highlighter Module Specification Logic
FAMILY
STRING LENGTH
LED COLOR
HL
300 - 1 Module
1200 - 4 Modules
RGB - Color Changing
ELV - 12~60V DC
2200K
INF - 380V DC
2700K
3000K
3000K-H1*
3500K
* CRI for standard LEDs is Minimum 80
4000K
High CRI, Minimum 90, available, by special
4000K-H1*
order, extra cost applies, longer lead time
5000K
6500K
RD - Red
GR - Green
Sample Logic : HL-1200-RGB-INF
BL - Blue
VOLTAGE
Diffuser/Cover + Power-Data Equipment
Through-wiring via sealed snap-in connectors
Fully sealed for use in dry, damp or wet locations
IP66
18 x 3-in-1 RGB or Monochromatic LEDs per 300mm/1ft .
Addressable per module 300mm/1ft
5W maximum power consumption per 300mm/1ft or 16W per meter
Projected lifetime 115,000hrs @ 23°C, 73°F (L70)
Up to 4000 cd/m2 diffuser tube luminance
Operating temperature -40°C to +50°C, -40°F to 122°F
A41 Architectural grade anodized mounting profile, no visible fasteners
Emerge Alliance Registered for data center applications, 260-400V DC
input power range (INF models only)
 5 year limited warranty











Options
 INFINITY™ Technology for exceptionally long runs from a single power
source
 Extra Low Voltage, 12-60V DC for short/medium runs
 Round or Flat UV stable and impact resistant PMMA diffuser tube with
nano-diffusing particles for perfectly even illumination, up to 4000 cd/m2
 UV stable and impact resistant PMMA clear cover lens for full brightness
effect
 300mm single module or 1200mm string of 4 module configurations
 RGB Color Changing or Monochromatic: 7 color temperatures of white
or red, green or blue LEDs
Product Configuration
HL-1200 -5000K-H1
-ELV
 No Dimming, On/Off or DMX, DALI or 0~10V control through GVA
Power-Data Equipment
GVA Lighting, Inc. 3400 Ridgeway Drive, # 14 Mississauga, Ontario L5L 0A2, Canada
Tel: + 1 905 569 6044 Fax: + 1 905 569 9823 Email: info@gvalighting.com
gvalighting.com
SP-HL-DL 20.07.15
Highlighter® HL-DL Direct View Architectural Delineation LED System
Typical System Diagram
GVA POWER SUPPLY
OR POWER-DATA BOX
DATA INPUT/OUTPUT
(OPTIONAL)
POWER-DATA OUT
JUNCTION
BOXES BY OTHERS
LINE VOLTAGE
LUMINAIRE
LEADER CABLE
HL-DL LUMINAIRES
LUMINAIRE
JUMPER CABLE
Product Specifications
HL-DL (per 300mm segment)
Electrical
ELV
INF
Typical
Maximum
Maximum
Rated Input Voltage
Power Consumption
Rated Current for Circuit
Optical
Light Source
Luminance (diffuser surface brightness)(cd/m2)
Control
Physical
Red (RGB)
Green (RGB)
Blue (RGB)
Yellow (RGB)
Magenta (RGB)
Cyan (RGB)
White (RGB)
3500K
6500K
Control Interface
Fixture Connections
Weight
Housing
Rated Operating Temperature
Rated Lifetime (L70 @ 23°C)
Environment
Certification &
Safety
18 x 3-in-1 RGB or mono color LEDs
399
661
1058
134
536
795
1156
3900
4000
GVA Lighting's proprietary ZH control interface
IP68 rated mating connectors
mm
inches
kg
lbs
Width x Height
Input range 12~60V DC
380V DC Nominal, 260V DC Minimum, 400V DC Maximum
4.8W
5W
6A
50 x 86.5
1.97 x 3.41
0.5
1.1
Injection molded, flame retardant polymeric body and lens, potted and sealed
Extruded aluminum mounting profile, A41 anodized
Extruded PMMA diffuser/cover, impact resistant, UV stable
-40°C to +50°C, -40°F to +122°F
115,000hrs
Dry or Damp or Wet Locations, 0-100% humidity, IP66
Listings
RoHS
LISTED
These figures are subject to change due to further development and innovations.
GVA Lighting, Inc. 3400 Ridgeway Drive, # 14 Mississauga, Ontario L5L 0A2, Canada
Tel: + 1 905 569 6044 Fax: + 1 905 569 9823 Email: info@gvalighting.com
gvalighting.com
SP-HL-DL 20.07.15
Highlighter® HL-DL Direct View Architectural Delineation LED System
Mounting Profile Ordering Logic*
FAMILY
NOMINAL LENGTH** (mm)
COLOR
PART NUMBER
PROFILE, HL, FABRICATED
300
600
900
1200
1500
1800
2100
2400
CM - Clear Matte Anodized, A41
CUSTOM - Custom Color
120629
120630
120631
120632
120633
120634
120635
120636
Round Diffuser Ordering Logic*
FAMILY
NOMINAL LENGTH** (mm)
PART NUMBER
DIFFUSER, HL-DL, ROUND, 50MM,
IMPACT RES PMMA, SATINE WHITE
300
600
900
1200
1500
1800
2100
2400
120459
120460
120461
120462
120463
120464
120465
120466
FAMILY
NOMINAL LENGTH** (mm)
PART NUMBER
DIFFUSER, HL-DL, FLAT, 46MM,
IMPACT RES PMMA, SATINE WHITE
300
600
900
1200
1500
1800
2100
2400
120664
120665
120666
120667
120668
120669
120670
120671
Flat Diffuser Ordering Logic*
Clear Lens Ordering Information* ***
FAMILY
PART NUMBER
PROFILE, HL-DL, COVER LENS, IMPACT RES PMMA, CLR
240826 (specify length)
Diffuser Shim Ordering Information*
! Mandatory for outdoor applications to secure diffuser or cover lens
FAMILY
PART NUMBER
PROFILE, HIGHLIGHTER, DIFFUSER SHIM, PLASTIC
240644 (specify length)
Connector Cap (must be used at the end of each run)
FAMILY
PART NUMBER
CONN, APP, HL-CONNECTOR CAP
230866
Ask factory about colored diffuser to match mono color LED versions
* Ordering logic configurations and quantities may be determined by specific details for your installation. GVA’s Applications team can assist in specifying the appropriate configurations
and quantities and create a Bill of Materials in the quoting process.
**Custom lengths for diffusers and mounting profiles up to 4.8m are available, consult factory.
*** Coming soon, consult factory.
GVA Lighting, Inc. 3400 Ridgeway Drive, # 14 Mississauga, Ontario L5L 0A2, Canada
Tel: + 1 905 569 6044 Fax: + 1 905 569 9823 Email: info@gvalighting.com
gvalighting.com
SP-HL-DL 20.07.15