Vellum Recessed LED Type: SPECIFICATIONS Project: VMMR | LED | Direct | Recessed HIGHLIGHTS ION AT AL TOT 360˚ SYSTE M INTE GR •Peerless 360˚ Total System Integration features 5-year limited warranty by Acuity Brands covering all components and construction • Up to 102 lm/W •Softshine®-engineered comfort optics •Flicker-free dimming to dark (0.1%) powered by eldoLED® driver •Integrated nLight® control module for system networking (optional) •Integrated sensor for daylight dimming and/or occupancy detection (optional) empowered •Seamless die cast trim with squared or rounded detail • White, black, aluminum or custom color DIMENSIONS VMMRA • LED Lighting Facts® partner VMMRB (remote driver) 3 1 ⁄4” 23 3 ⁄4” 2” LUMEN PACKAGES Based on 3500K. Additional color temperatures available. 23 3 ⁄4” 23 3 ⁄4” Direct LED Ouput 5000LM Delivered Lumens 5020 Input Watts 51 Lumens Per Watt 98 23 3 ⁄4” STANDARD DISTRIBUTION 23 3 ⁄4” 23 3 ⁄4” Specify RDEP option for rounded corners 100% Down COMPANION LUMINAIRE(S) VMM9 VMMQP VMMSP © 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 07/19/16 1 Type: Vellum Recessed LED Project: VMMR | LED | Direct | Recessed SPECIFICATIONS Housing Embedded Sensor One-piece, die-cast aluminum trim with no exposed fasteners. Squared corners standard. For rounded corners choose option RDEP. Optional sensor is embedded directly into the lens surface following Peerless’ proprietary SubtleView Integration™ process. hours (L 80) at 25° C ambient temperature. Specify 120V, 277V or 347V. Pre-wired with 18AWG fixture wire. For special circuiting or wire gauge, consult factory. Plug-in electrical connectors included. Color Dimming Driver Color for housing is white, black or painted aluminum. Consult factory for custom colors. Integrated or remote eldoLED® driver (see page 3) provides “natural dimming” with smooth, continuous and flicker-free dimming to dark (0.1%). Syncing for controls: 2mA max. THD: < 20%. Insignificant inrush current at 120 and 277VAC. FCC Class A and B tested for EMI and RFI. Environment Source Edge-lit LEDs using light guide technology deliver up to up to 5000 nominal lumens. Three available color temperature options (3000K, 3500K and 4000K) — all within 2.5 MacAdam ellipses. Ambient operating temperature between 0° C and 25° C. For damp location label, choose option DL. Validation CSA/CUS listed. LM-79 tested. Individual luminaire meets FCC Part 15 requirements. Lighting Facts partner. For 0-10V driver details go to: PeerlessLighting.com/561M For DALI driver details go to: PeerlessLighting.com/560M Packaging Controls and System Networking Options Mounting Installs into most standard T-grid ceilings or hard surface ceilings. For hard surface ceilings choose option FLNGW. A fixture cannot be field converted. For wired networking via Cat-5e, choose an integrated nLight® module. For daylight dimming and/or dual technology occupancy detection, see Page 5 for integrated sensor options. Optics Lumen Management Recycled cardboard box and inserts. Biodegradable, protective luminaire bag. Recycled kraft paper tape. Warranty 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/ CustomerResources/Terms_and_conditions.aspx For constant lumen output at 80% of initial light output, choose lumen management (CL80). Softshine® optical system consists of high performance acrylic lens and film. Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C. Electrical LED light engine — consisting of modular LED boards and eldoLED® dimming driver — is rated for 50,000 MODEL NUMBER Example: VMMRA 80CRI 35K ID5000LM 60/40 DARK ZT SCT F3D/24F C110 t t t t Luminaire LED Color Rendering LED Color Temperature Direct LED Ouput VMMRA1 VMMRB2 1 Driver enclosure installed on luminaire 2 Remote driver enclosure installed in electrical closet with wires ( by others) run to the luminaire 80CRI 80+ CRI 90CRI* 90+ CRI *Longer lead times- consult factory 30K 35K 40K 3000K 3500K 4000K t t t Control Input Voltage Emergency Options ZT 0-10V NLIGHT nLight enabled DALI DALI 120 120V 277 277V 347* 347V *Not available with VMMRA option or NLIGHT t t 5000LM Minimum Dimming Level 5000 nominal lumens DARK Constant current, dimming to < 1% t (Blank) None E10W* 10-Watt Emergency battery pack *Only available in VMMRB, not available with 347V Control Option (blank) ADC PDT No sensor Daylight dimming sensor Occupancy sensor occupancy/daylight sensor t Lumen Management (Blank) None CL80 Constant lumen output, 80% Available with ZT or NLIGHT. Only dimes to 1% Color C041 C110 C201 C099 Options White white (low gloss) Painted aluminum (low gloss) Black (low gloss) Custom color © 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. CSA Manufactured to Canadian Standards CP Chicago Plenum DL Damp location listed GLR Fast blow GMF Slow blow RDEP Rounded end cap FLNGW* Dry wall grid adapter *For use on hard surface ceilings. Must be selected for dry wall ceilings. PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 07/19/16 2 Type: Vellum Recessed LED Project: VMMR | LED | Direct | Recessed PHOTOMETRICS ID5000LM 80CRI 35k 98 lm/W 5020 delivered lumens 100% down WEIGHTS VMMR 23 3 ⁄4” 24 LBS 23 3 ⁄4” DRIVER MOUNTING Driver enclosure VMMRA Luminaire Driver enclosure (installed on luminaire) VMMRB Low voltage D.C. power feed wire (by others) Luminaire Ceiling Building wires Wall / electrical closet Refer to installation instructions for remote lengths. © 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 07/19/16 3 Type: Vellum Recessed LED Project: VMMR | LED | Direct | Recessed For more information about sensor and networking options, download the controls guide at PeerlessLighting.com/ControlsGuide INTEGRATED SENSOR OPTIONS Control Input Integrated Sensor NLIGHT ADC NLIGHT PDT ZT ADC ZT PDT Daylight Dimming Daylight Dimming and/or Occupancy Detection nLight Wired Networking X X X Link to Spec Sheet X PeerlessLighting.com/nES-ADCX X PeerlessLighting.com/nES-PDT7 PeerlessLighting.com/nES-ADCX X PeerlessLighting.com/nES-PDT7 nES ADCX nES PDT 7 Daylight harvesting deactivated by default and field programmed per sequence of operations for PDT sensor options. Luminaires specified with nLight system networking ship with one RJ-45 connector integrated into the luminaire, 10’ of Cat-5e cable and a splitter to control the entire luminaire row (depending on wattage/voltage limitations). For multiple zones, please contact TechSupport@PeerlessLighting.com. OCCUPANCY DETECTION COVERAGE At the 7.5 ft (2.9 m) hanging height of a typical pendant mount fixture the sensor provides 10 ft (3.05 m) radial detection of small motion. At a 9 ft (2.74 m) hanging height the radius is 12 ft (3.66 m) for small motion. 4.5 3.8 3 2.5 1.5 0.75 0m 0.75 1.5 2.5 3 3.8 4.5 Adequate for walking motion detection from mounting heights between 7.5 ft (2.29 m) and 20 ft (6.10 m). Initial detection will occur earlier when walking across sensor’s field of view than when walking directly at sensor. Initial detection of walking motion into long coverage segment will occur at distances of 2x the mounting height up to 15 ft (4.57 m) and 1.75x up to 20 ft (6.10 m). Lens assembly rotates 15° to enable adjustment in order to line up long segments. Lens rotates 15° to enable adjustment 15 12.5 10 7 5 2.5 0 ft 2.5 5 7 10 12.5 15 COMPATIBLE nLIGHT COMPONENTS WITH INTEGRATED CONTROLS nPODM DX WH nPODM 2P DX WH nPODM 4P DX WH SensorSwitch.com/DataSheets/nPODM.pdf nPODM 2L WH nPOD GFX WH SensorSwitch.com/DataSheets/nPODM-xL.pdf SensorSwitch.com/DataSheets/nPOD-GFX.pdf EZB COMPATIBILITY Additional control options with eldoLED 0-10V driver(s). PeerlessLighting.com/eldoLED-compatibility © 2014-2016 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 07/19/16 4