Vellum Recessed LED Type: SPECIFICATIONS Project: VMMR | LED | Direct | Recessed HIGHLIGHTS ION AT AL TOT 360˚ SYSTE M INTE GR •Peerless 360˚ Total System Integration features 5-year limited warranty by Acuity Brands covering all components and construction • Up to 102 lm/W •Softshine®-engineered comfort optics •Flicker-free dimming to dark (0.1%) powered by eldoLED® driver •Integrated nLight® control module for system networking (optional) •Integrated sensor for daylight dimming and/or occupancy detection (optional) empowered •Seamless die cast trim with squared or rounded detail • White, black, aluminum or custom color DIMENSIONS VMMRA • LED Lighting Facts® partner VMMRB (remote driver) 3 1 ⁄4” 23 3 ⁄4” 2” LUMEN PACKAGES Based on 3500K. Additional color temperatures available. 23 3 ⁄4” Lumen Packages: Delivered Lumens* 23 3 ⁄4” High (HI) 5020 Input Watts* 51 Lumens Per Watt* 98 23 3 ⁄4” STANDARD DISTRIBUTION 23 3 ⁄4” 23 3 ⁄4” Specify RDEP option for rounded corners 100% Down COMPANION LUMINAIRE(S) VMM9 VMMQP VMMSP © 2014-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 04/14/15 1 Type: Vellum Recessed LED Project: VMMR | LED | Direct | Recessed SPECIFICATIONS Housing Embedded Sensor One-piece, die-cast aluminum trim with no exposed fasteners. Squared corners standard. For rounded corners choose option RDEP. Optional sensor is embedded directly into the lens surface following Peerless’ proprietary SubtleView Integration™ process. hours (L 80) at 25° C ambient temperature. Specify 120V, 277V or 347V. Pre-wired with 18AWG fixture wire. For special circuiting or wire gauge, consult factory. Plug-in electrical connectors included. Color Dimming Driver Color for housing is white, black or painted aluminum. Consult factory for custom colors. Integrated or remote eldoLED® driver (see page 3) provides “natural dimming” with smooth, continuous and flicker-free dimming to dark (0.1%). Syncing for controls: 2mA max. THD: < 20%. Insignificant inrush current at 120 and 277VAC. FCC Class A and B tested for EMI and RFI. Environment Source Edge-lit LEDs using light guide technology deliver up to up to 5000 nominal lumens. Three available color temperature options (3000K, 3500K and 4000K) — all within 2.5 MacAdam ellipses. For 0-10V driver details go to: PeerlessLighting.com/561M For DALI driver details go to: PeerlessLighting.com/560M Controls and System Networking Options Mounting Installs into most standard T-grid ceilings or hard surface ceilings. For hard surface ceilings choose option FLNGW. For wired networking via Cat-5e, choose an integrated nLight® module (driver: ENNB). For daylight dimming and/or dual technology occupancy detection, see Page 5 for integrated sensor options. Optics Lumen Management For constant lumen output at 80% of initial light output, choose lumen management (LMES20). Softshine® optical system consists of high performance acrylic lens and film. Electrical LED light engine — consisting of modular LED boards and eldoLED® dimming driver — is rated for 50,000 Ambient operating temperature between 0° C and 25° C. For damp location label, choose option DL. Validation CSA/CUS listed. LM-79 tested. Individual luminaire meets FCC Part 15 requirements. Lighting Facts partner. Packaging Recycled cardboard box and inserts. Biodegradable, protective luminaire bag. Recycled kraft paper tape. Warranty 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/ CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C. MODEL NUMBER Example: VMMRA HI 120 SCT EZB LP835 C041 t t Luminaire VMMRA1 VMMRB2 t Light Output t Voltage HI 5000 nominal delivered lumens 1 Driver enclosure installed on luminaire 2 Remote driver enclosure installed in electrical closet with wires (by others) run to the luminaire (Blank) None EC Emergency circuit EL* Emergency battery pack (1300 lumens) *Not available with VMMRA option. *Not available with VMMRB, 347V and CSA options. t Dimming Driver with Integrated System Networking Integrated Sensor eldoLED with integrated nLight controller Linear dimming curve Driver must be paired with sensor option from the same row. Ex: ENNB 2DSCNL Integrated Lumen Management (Blank) __DSCNL __MSD7NL DSCNL No sensor Daylight only Daylight/occupancy (Blank) __DSCNL __MSD7N DSCN No sensor Daylight only Daylight/occupancy (Blank) None LMES20* 80% lumen management *Available with EZB and ENNB only. Indicate number of zones per row. Ex: 3DSCN (Blank) None XLMES20* 80% lumen management *Must be selected if planning to install a separate, non-integrated nLight networking system with lumen management. t LED Color Temperature LP830 LP835 LP840 LP930* LP935* LP940* 3000K 80+ CRI 17-20+ R9 3500K 80+ CRI 17-20+ R9 4000K 80+ CRI 17-20+ R9 3000K 90+ CRI 50 R9 3500K 90+ CRI 50 R9 4000K 90+ CRI 50 R9 SCT Single circuit Non-Integrated Lumen Management eldoLED 0-10V Linear dimming curve t Switching t Dimming Driver EZB EZBN Emergency Type 120 277 347* t ENNB ENNBN t t Color C041 C110 C201 C099 Options White white (low gloss) Painted aluminum (fine textured) Black (low gloss) Custom color *Longer lead times - consult factory. CP CSA DL FLNGW* GLR GMF RDEP Chicago plenum (VMMRA only) Meets Canadian standards. (Must select with Canadian orders) Damp location label Dry wall grid adapter Fusing (fast blow) Fusing (slow blow) Rounded corners *For use on hard surface ceilings. © 2014-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 04/14/15 2 Type: Vellum Recessed LED Project: VMMR | LED | Direct | Recessed PHOTOMETRICS HI LP835 98 lm/W 5020 delivered lumens 100% down WEIGHTS VMMR 23 3 ⁄4” 24 LBS 23 3 ⁄4” DRIVER MOUNTING Driver enclosure VMMRA Luminaire Driver enclosure (installed on luminaire) VMMRB Low voltage D.C. power feed wire (by others) Luminaire Ceiling Building wires Wall / electrical closet Refer to installation instructions for remote lengths. © 2014-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 04/14/15 3 Type: Vellum Recessed LED Project: VMMR | LED | Direct | Recessed For more information about sensor and networking options, download the controls guide at PeerlessLighting.com/ControlsGuide INTEGRATED SENSOR OPTIONS Dimming Driver Integrated Sensor ENNB DSCNL ENNB MSD7NL DSCNL EXAB MS17XA DSCXA EZB DSCN EZB MSD7N DSCN Daylight Dimming nLight Daylight Wired Dimming Networking and/or Occupancy Detection X X XPoint Wireless Networking Link to Spec Sheet X PeerlessLighting.com/nES-ADCX X PeerlessLighting.com/nES-PDT7 PeerlessLighting.com/XPW PeerlessLighting.com/nES-ADCX X PeerlessLighting.com/nES-PDT7 Daylight harvesting deactivated by default and field programmed per sequence of operations. Luminaires specified with nLight system networking ship with one RJ-45 connector integrated into the luminaire, 10’ of Cat-5e cable and a splitter to control the entire luminaire row (depending on wattage/voltage limitations). For multiple zones, please contact TechSupport@PeerlessLighting.com. OCCUPANCY DETECTION COVERAGE At the 7.5 ft (2.9 m) hanging height of a typical pendant mount fixture the sensor provides 10 ft (3.05 m) radial detection of small motion. At a 9 ft (2.74 m) hanging height the radius is 12 ft (3.66 m) for small motion. Adequate for walking motion detection from mounting heights between 7.5 ft (2.29 m) and 20 ft (6.10 m). Initial detection will occur earlier when walking across sensor’s field of view than when walking directly at sensor. Initial detection of walking motion into long coverage segment will occur at distances of 2x the mounting height up to 15 ft (4.57 m) and 1.75x up to 20 ft (6.10 m). Lens assembly rotates 15° to enable adjustment in order to line up long segments. © 2014-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. Lens rotates 15° to enable adjustment 4.5 3.8 3 2.5 1.5 0.75 0m 0.75 1.5 2.5 3 3.8 4.5 PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 04/14/15 15 12.5 10 7 5 2.5 0 ft 2.5 5 7 10 12.5 15 4 Type: Vellum Recessed LED Project: VMMR | LED | Direct | Recessed COMPATIBLE nLIGHT COMPONENTS WITH INTEGRATED CONTROLS nPODM DX WH nPODM 2P DX WH nPODM 4P DX WH SensorSwitch.com/DataSheets/nPODM.pdf nPODM 2L WH nPOD GFX WH SensorSwitch.com/DataSheets/nPODM-xL.pdf SensorSwitch.com/DataSheets/nPOD-GFX.pdf EZB COMPATIBILITY Additional control options with eldoLED 0-10V driver(s). PeerlessLighting.com/eldoLED-compatibility LIGHTING FACTS LABELS LP835 HI © 2014-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products and technologies in this document may be covered by one or more U.S. Patents and Patents Pending. NOTE: Specifications subject to change without notice. PeerlessLighting.com 510.845.2760 | TechSupport@PeerlessLighting.com Rev. 04/14/15 5